| /* | |
| * (C) Copyright 2001 | |
| * Erik Theisen, Wave 7 Optics, etheisen@mindspring.com | |
| * and | |
| * Bill Hunter, Wave 7 Optics, william.hunter@mediaone.net | |
| * | |
| * See file CREDITS for list of people who contributed to this | |
| * project. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation; either version 2 of | |
| * the License, or (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
| * MA 02111-1307 USA | |
| */ | |
| #include <config.h> | |
| #include <common.h> | |
| #include "w7o.h" | |
| #include <asm/processor.h> | |
| #include "errors.h" | |
| static void | |
| fpga_img_write(unsigned long *src, unsigned long len, unsigned short *daddr) | |
| { | |
| unsigned long i; | |
| volatile unsigned long val; | |
| volatile unsigned short *dest = daddr; /* volatile-bypass optimizer */ | |
| for (i = 0; i < len; i++, src++) { | |
| val = *src; | |
| *dest = (unsigned short)((val & 0xff000000L) >> 16); | |
| *dest = (unsigned short)((val & 0x00ff0000L) >> 8); | |
| *dest = (unsigned short)(val & 0x0000ff00L); | |
| *dest = (unsigned short)((val & 0x000000ffL) << 8); | |
| } | |
| /* Terminate programming with 4 C clocks */ | |
| dest = daddr; | |
| val = *(unsigned short *)dest; | |
| val = *(unsigned short *)dest; | |
| val = *(unsigned short *)dest; | |
| val = *(unsigned short *)dest; | |
| } | |
| int | |
| fpgaDownload(unsigned char *saddr, | |
| unsigned long size, | |
| unsigned short *daddr) | |
| { | |
| int i; /* index, intr disable flag */ | |
| int start; /* timer */ | |
| unsigned long greg, grego; /* GPIO & output register */ | |
| unsigned long length; /* image size in words */ | |
| unsigned long *source; /* image source addr */ | |
| unsigned short *dest; /* destination FPGA addr */ | |
| volatile unsigned short *ndest; /* temp dest FPGA addr */ | |
| volatile unsigned short val; /* temp val */ | |
| unsigned long cnfg = GPIO_XCV_CNFG; /* FPGA CNFG */ | |
| unsigned long eirq = GPIO_XCV_IRQ; | |
| int retval = -1; /* Function return value */ | |
| /* Setup some basic values */ | |
| length = (size / 4) + 1; /* size in words, rounding UP | |
| is OK */ | |
| source = (unsigned long *)saddr; | |
| dest = (unsigned short *)daddr; | |
| /* Get DCR output register */ | |
| grego = in32(PPC405GP_GPIO0_OR); | |
| /* Reset FPGA */ | |
| grego &= ~GPIO_XCV_PROG; /* PROG line low */ | |
| out32(PPC405GP_GPIO0_OR, grego); | |
| /* Setup timeout timer */ | |
| start = get_timer(0); | |
| /* Wait for FPGA init line */ | |
| while(in32(PPC405GP_GPIO0_IR) & GPIO_XCV_INIT) { /* Wait INIT line low */ | |
| /* Check for timeout - 100us max, so use 3ms */ | |
| if (get_timer(start) > 3) { | |
| printf(" failed to start init.\n"); | |
| log_warn(ERR_XINIT0); /* Don't halt */ | |
| /* Reset line stays low */ | |
| goto done; /* I like gotos... */ | |
| } | |
| } | |
| /* Unreset FPGA */ | |
| grego |= GPIO_XCV_PROG; /* PROG line high */ | |
| out32(PPC405GP_GPIO0_OR, grego); | |
| /* Wait for FPGA end of init period . */ | |
| while(!(in32(PPC405GP_GPIO0_IR) & GPIO_XCV_INIT)) { /* Wait for INIT hi */ | |
| /* Check for timeout */ | |
| if (get_timer(start) > 3) { | |
| printf(" failed to exit init.\n"); | |
| log_warn(ERR_XINIT1); | |
| /* Reset FPGA */ | |
| grego &= ~GPIO_XCV_PROG; /* PROG line low */ | |
| out32(PPC405GP_GPIO0_OR, grego); | |
| goto done; | |
| } | |
| } | |
| /* Now program FPGA ... */ | |
| ndest = dest; | |
| for (i = 0; i < CONFIG_NUM_FPGAS; i++) { | |
| /* Toggle IRQ/GPIO */ | |
| greg = mfdcr(CPC0_CR0); /* get chip ctrl register */ | |
| greg |= eirq; /* toggle irq/gpio */ | |
| mtdcr(CPC0_CR0, greg); /* ... just do it */ | |
| /* turn on open drain for CNFG */ | |
| greg = in32(PPC405GP_GPIO0_ODR); /* get open drain register */ | |
| greg |= cnfg; /* CNFG open drain */ | |
| out32(PPC405GP_GPIO0_ODR, greg); /* .. just do it */ | |
| /* Turn output enable on for CNFG */ | |
| greg = in32(PPC405GP_GPIO0_TCR); /* get tristate register */ | |
| greg |= cnfg; /* CNFG tristate inactive */ | |
| out32(PPC405GP_GPIO0_TCR, greg); /* ... just do it */ | |
| /* Setup FPGA for programming */ | |
| grego &= ~cnfg; /* CONFIG line low */ | |
| out32(PPC405GP_GPIO0_OR, grego); | |
| /* | |
| * Program the FPGA | |
| */ | |
| printf("\n destination: 0x%lx ", (unsigned long)ndest); | |
| fpga_img_write(source, length, (unsigned short *)ndest); | |
| /* Done programming */ | |
| grego |= cnfg; /* CONFIG line high */ | |
| out32(PPC405GP_GPIO0_OR, grego); | |
| /* Turn output enable OFF for CNFG */ | |
| greg = in32(PPC405GP_GPIO0_TCR); /* get tristate register */ | |
| greg &= ~cnfg; /* CNFG tristate inactive */ | |
| out32(PPC405GP_GPIO0_TCR, greg); /* ... just do it */ | |
| /* Toggle IRQ/GPIO */ | |
| greg = mfdcr(CPC0_CR0); /* get chip ctrl register */ | |
| greg &= ~eirq; /* toggle irq/gpio */ | |
| mtdcr(CPC0_CR0, greg); /* ... just do it */ | |
| ndest = (unsigned short *)((char *)ndest + 0x00100000L); /* XXX - Next FPGA addr */ | |
| cnfg >>= 1; /* XXX - Next */ | |
| eirq >>= 1; | |
| } | |
| /* Terminate programming with 4 C clocks */ | |
| ndest = dest; | |
| for (i = 0; i < CONFIG_NUM_FPGAS; i++) { | |
| val = *ndest; | |
| val = *ndest; | |
| val = *ndest; | |
| val = *ndest; | |
| ndest = (unsigned short *)((char *)ndest + 0x00100000L); | |
| } | |
| /* Setup timer */ | |
| start = get_timer(0); | |
| /* Wait for FPGA end of programming period . */ | |
| while(!(in32(PPC405GP_GPIO0_IR) & GPIO_XCV_DONE)) { /* Test DONE low */ | |
| /* Check for timeout */ | |
| if (get_timer(start) > 3) { | |
| printf(" done failed to come high.\n"); | |
| log_warn(ERR_XDONE1); | |
| /* Reset FPGA */ | |
| grego &= ~GPIO_XCV_PROG; /* PROG line low */ | |
| out32(PPC405GP_GPIO0_OR, grego); | |
| goto done; | |
| } | |
| } | |
| printf("\n FPGA load succeeded\n"); | |
| retval = 0; /* Program OK */ | |
| done: | |
| return retval; | |
| } | |
| /* FPGA image is stored in flash */ | |
| extern flash_info_t flash_info[]; | |
| int init_fpga(void) | |
| { | |
| unsigned int i,j,ptr; /* General purpose */ | |
| unsigned char bufchar; /* General purpose character */ | |
| unsigned char *buf; /* Start of image pointer */ | |
| unsigned long len; /* Length of image */ | |
| unsigned char *fn_buf; /* Start of filename string */ | |
| unsigned int fn_len; /* Length of filename string */ | |
| unsigned char *xcv_buf; /* Pointer to start of image */ | |
| unsigned long xcv_len; /* Length of image */ | |
| unsigned long crc; /* 30bit crc in image */ | |
| unsigned long calc_crc; /* Calc'd 30bit crc */ | |
| int retval = -1; | |
| /* Tell the world what we are doing */ | |
| printf("FPGA: "); | |
| /* | |
| * Get address of first sector where the FPGA | |
| * image is stored. | |
| */ | |
| buf = (unsigned char *)flash_info[1].start[0]; | |
| /* | |
| * Get the stored image's CRC & length. | |
| */ | |
| crc = *(unsigned long *)(buf+4); /* CRC is first long word */ | |
| len = *(unsigned long *)(buf+8); /* Image len is next long */ | |
| /* Pedantic */ | |
| if ((len < 0x133A4) || (len > 0x80000)) | |
| goto bad_image; | |
| /* | |
| * Get the file name pointer and length. | |
| */ | |
| fn_len = (*(unsigned short *)(buf+12) & 0xff); /* filename length | |
| is next short */ | |
| fn_buf = buf + 14; | |
| /* | |
| * Get the FPGA image pointer and length length. | |
| */ | |
| xcv_buf = fn_buf + fn_len; /* pointer to fpga image */ | |
| xcv_len = len - 14 - fn_len; /* fpga image length */ | |
| /* Check for uninitialized FLASH */ | |
| if ((strncmp((char *)buf, "w7o", 3)!=0) || (len > 0x0007ffffL) || (len == 0)) | |
| goto bad_image; | |
| /* | |
| * Calculate and Check the image's CRC. | |
| */ | |
| calc_crc = crc32(0, xcv_buf, xcv_len); | |
| if (crc != calc_crc) { | |
| printf("\nfailed - bad CRC\n"); | |
| goto done; | |
| } | |
| /* Output the file name */ | |
| printf("file name : "); | |
| for (i=0;i<fn_len;i++) { | |
| bufchar = fn_buf[+i]; | |
| if (bufchar<' ' || bufchar>'~') bufchar = '.'; | |
| putc(bufchar); | |
| } | |
| /* | |
| * find rest of display data | |
| */ | |
| ptr = 15; /* Offset to ncd filename | |
| length in fpga image */ | |
| j = xcv_buf[ptr]; /* Get len of ncd filename */ | |
| if (j > 32) goto bad_image; | |
| ptr = ptr + j + 3; /* skip ncd filename string + | |
| 3 bytes more bytes */ | |
| /* | |
| * output target device string | |
| */ | |
| j = xcv_buf[ptr++] - 1; /* len of targ str less term */ | |
| if (j > 32) goto bad_image; | |
| printf("\n target : "); | |
| for (i = 0; i < j; i++) { | |
| bufchar = (xcv_buf[ptr++]); | |
| if (bufchar<' ' || bufchar>'~') bufchar = '.'; | |
| putc(bufchar); | |
| } | |
| /* | |
| * output compilation date string and time string | |
| */ | |
| ptr += 3; /* skip 2 bytes */ | |
| printf("\n synth time : "); | |
| j = (xcv_buf[ptr++] - 1); /* len of date str less term */ | |
| if (j > 32) goto bad_image; | |
| for (i = 0; i < j; i++) { | |
| bufchar = (xcv_buf[ptr++]); | |
| if (bufchar<' ' || bufchar>'~') bufchar = '.'; | |
| putc(bufchar); | |
| } | |
| ptr += 3; /* Skip 2 bytes */ | |
| printf(" - "); | |
| j = (xcv_buf[ptr++] - 1); /* slen = targ dev str len */ | |
| if (j > 32) goto bad_image; | |
| for (i = 0; i < j; i++) { | |
| bufchar = (xcv_buf[ptr++]); | |
| if (bufchar<' ' || bufchar>'~') bufchar = '.'; | |
| putc(bufchar); | |
| } | |
| /* | |
| * output crc and length strings | |
| */ | |
| printf("\n len & crc : 0x%lx 0x%lx", len, crc); | |
| /* | |
| * Program the FPGA. | |
| */ | |
| retval = fpgaDownload((unsigned char*)xcv_buf, xcv_len, | |
| (unsigned short *)0xfd000000L); | |
| return retval; | |
| bad_image: | |
| printf("\n BAD FPGA image format @ %lx\n", flash_info[1].start[0]); | |
| log_warn(ERR_XIMAGE); | |
| done: | |
| return retval; | |
| } | |
| void test_fpga(unsigned short *daddr) | |
| { | |
| int i; | |
| volatile unsigned short *ndest = daddr; | |
| for (i = 0; i < CONFIG_NUM_FPGAS; i++) { | |
| #if defined(CONFIG_W7OLMG) | |
| ndest[0x7e] = 0x55aa; | |
| if (ndest[0x7e] != 0x55aa) | |
| log_warn(ERR_XRW1 + i); | |
| ndest[0x7e] = 0xaa55; | |
| if (ndest[0x7e] != 0xaa55) | |
| log_warn(ERR_XRW1 + i); | |
| ndest[0x7e] = 0xc318; | |
| if (ndest[0x7e] != 0xc318) | |
| log_warn(ERR_XRW1 + i); | |
| #elif defined(CONFIG_W7OLMC) | |
| ndest[0x800] = 0x55aa; | |
| ndest[0x801] = 0xaa55; | |
| ndest[0x802] = 0xc318; | |
| ndest[0x4800] = 0x55aa; | |
| ndest[0x4801] = 0xaa55; | |
| ndest[0x4802] = 0xc318; | |
| if ((ndest[0x800] != 0x55aa) || | |
| (ndest[0x801] != 0xaa55) || | |
| (ndest[0x802] != 0xc318)) | |
| log_warn(ERR_XRW1 + (2 * i)); /* Auto gen error code */ | |
| if ((ndest[0x4800] != 0x55aa) || | |
| (ndest[0x4801] != 0xaa55) || | |
| (ndest[0x4802] != 0xc318)) | |
| log_warn(ERR_XRW2 + (2 * i)); /* Auto gen error code */ | |
| #else | |
| # error "Unknown W7O board configuration" | |
| #endif | |
| } | |
| printf(" FPGA ready\n"); | |
| return; | |
| } |