| /* | |
| * (C) Copyright 2003, Psyent Corporation <www.psyent.com> | |
| * Scott McNutt <smcnutt@psyent.com> | |
| * | |
| * See file CREDITS for list of people who contributed to this | |
| * project. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation; either version 2 of | |
| * the License, or (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
| * MA 02111-1307 USA | |
| */ | |
| #include <common.h> | |
| #if defined(CONFIG_NIOS_ASMI) | |
| #include <command.h> | |
| #include <nios-io.h> | |
| #if !defined(CFG_NIOS_ASMIBASE) | |
| #error "*** CFG_NIOS_ASMIBASE not defined ***" | |
| #endif | |
| /*-----------------------------------------------------------------------*/ | |
| #define SHORT_HELP\ | |
| "asmi - read/write Cyclone ASMI configuration device.\n" | |
| #define LONG_HELP\ | |
| "\n"\ | |
| "asmi erase start [end]\n"\ | |
| " - erase sector start or sectors start through end.\n"\ | |
| "asmi info\n"\ | |
| " - display ASMI device information.\n"\ | |
| "asmi protect on | off\n"\ | |
| " - turn device protection on or off.\n"\ | |
| "asmi read addr offset count\n"\ | |
| " - read count bytes from offset to addr.\n"\ | |
| "asmi write addr offset count\n"\ | |
| " - write count bytes to offset from addr.\n"\ | |
| "asmi verify addr offset count\n"\ | |
| " - verify count bytes at offset from addr.\n" | |
| /*-----------------------------------------------------------------------*/ | |
| /* Operation codes for serial configuration devices | |
| */ | |
| #define ASMI_WRITE_ENA 0x06 /* Write enable */ | |
| #define ASMI_WRITE_DIS 0x04 /* Write disable */ | |
| #define ASMI_READ_STAT 0x05 /* Read status */ | |
| #define ASMI_READ_BYTES 0x03 /* Read bytes */ | |
| #define ASMI_READ_ID 0xab /* Read silicon id */ | |
| #define ASMI_WRITE_STAT 0x01 /* Write status */ | |
| #define ASMI_WRITE_BYTES 0x02 /* Write bytes */ | |
| #define ASMI_ERASE_BULK 0xc7 /* Erase entire device */ | |
| #define ASMI_ERASE_SECT 0xd8 /* Erase sector */ | |
| /* Device status register bits | |
| */ | |
| #define ASMI_STATUS_WIP (1<<0) /* Write in progress */ | |
| #define ASMI_STATUS_WEL (1<<1) /* Write enable latch */ | |
| static nios_asmi_t *asmi = (nios_asmi_t *)CFG_NIOS_ASMIBASE; | |
| /*********************************************************************** | |
| * Device access | |
| ***********************************************************************/ | |
| static void asmi_cs (int assert) | |
| { | |
| if (assert) { | |
| asmi->control |= NIOS_ASMI_SSO; | |
| } else { | |
| /* Let all bits shift out */ | |
| while ((asmi->status & NIOS_ASMI_TMT) == 0) | |
| ; | |
| asmi->control &= ~NIOS_ASMI_SSO; | |
| } | |
| } | |
| static void asmi_tx (unsigned char c) | |
| { | |
| while ((asmi->status & NIOS_ASMI_TRDY) == 0) | |
| ; | |
| asmi->txdata = c; | |
| } | |
| static int asmi_rx (void) | |
| { | |
| while ((asmi->status & NIOS_ASMI_RRDY) == 0) | |
| ; | |
| return (asmi->rxdata); | |
| } | |
| static unsigned char bitrev[] = { | |
| 0x00, 0x08, 0x04, 0x0c, 0x02, 0x0a, 0x06, 0x0e, | |
| 0x01, 0x09, 0x05, 0x0d, 0x03, 0x0b, 0x07, 0x0f | |
| }; | |
| static unsigned char asmi_bitrev( unsigned char c ) | |
| { | |
| unsigned char val; | |
| val = bitrev[c>>4]; | |
| val |= bitrev[c & 0x0f]<<4; | |
| return (val); | |
| } | |
| static void asmi_rcv (unsigned char *dst, int len) | |
| { | |
| while (len--) { | |
| asmi_tx (0); | |
| *dst++ = asmi_rx (); | |
| } | |
| } | |
| static void asmi_rrcv (unsigned char *dst, int len) | |
| { | |
| while (len--) { | |
| asmi_tx (0); | |
| *dst++ = asmi_bitrev (asmi_rx ()); | |
| } | |
| } | |
| static void asmi_snd (unsigned char *src, int len) | |
| { | |
| while (len--) { | |
| asmi_tx (*src++); | |
| asmi_rx (); | |
| } | |
| } | |
| static void asmi_rsnd (unsigned char *src, int len) | |
| { | |
| while (len--) { | |
| asmi_tx (asmi_bitrev (*src++)); | |
| asmi_rx (); | |
| } | |
| } | |
| static void asmi_wr_enable (void) | |
| { | |
| asmi_cs (1); | |
| asmi_tx (ASMI_WRITE_ENA); | |
| asmi_rx (); | |
| asmi_cs (0); | |
| } | |
| static unsigned char asmi_status_rd (void) | |
| { | |
| unsigned char status; | |
| asmi_cs (1); | |
| asmi_tx (ASMI_READ_STAT); | |
| asmi_rx (); | |
| asmi_tx (0); | |
| status = asmi_rx (); | |
| asmi_cs (0); | |
| return (status); | |
| } | |
| static void asmi_status_wr (unsigned char status) | |
| { | |
| asmi_wr_enable (); | |
| asmi_cs (1); | |
| asmi_tx (ASMI_WRITE_STAT); | |
| asmi_rx (); | |
| asmi_tx (status); | |
| asmi_rx (); | |
| asmi_cs (0); | |
| return; | |
| } | |
| /*********************************************************************** | |
| * Device information | |
| ***********************************************************************/ | |
| typedef struct asmi_devinfo_t { | |
| const char *name; /* Device name */ | |
| unsigned char id; /* Device silicon id */ | |
| unsigned char size; /* Total size log2(bytes)*/ | |
| unsigned char num_sects; /* Number of sectors */ | |
| unsigned char sz_sect; /* Sector size log2(bytes) */ | |
| unsigned char sz_page; /* Page size log2(bytes) */ | |
| unsigned char prot_mask; /* Protection mask */ | |
| }asmi_devinfo_t; | |
| static struct asmi_devinfo_t devinfo[] = { | |
| { "EPCS1 ", 0x10, 17, 4, 15, 8, 0x0c }, | |
| { "EPCS4 ", 0x12, 19, 8, 16, 8, 0x1c }, | |
| { 0, 0, 0, 0, 0, 0 } | |
| }; | |
| static asmi_devinfo_t *asmi_dev_find (void) | |
| { | |
| unsigned char buf[4]; | |
| unsigned char id; | |
| int i; | |
| struct asmi_devinfo_t *dev = NULL; | |
| /* Read silicon id requires 3 "dummy bytes" before it's put | |
| * on the wire. | |
| */ | |
| buf[0] = ASMI_READ_ID; | |
| buf[1] = 0; | |
| buf[2] = 0; | |
| buf[3] = 0; | |
| asmi_cs (1); | |
| asmi_snd (buf,4); | |
| asmi_rcv (buf,1); | |
| asmi_cs (0); | |
| id = buf[0]; | |
| /* Find the info struct */ | |
| i = 0; | |
| while (devinfo[i].name) { | |
| if (id == devinfo[i].id) { | |
| dev = &devinfo[i]; | |
| break; | |
| } | |
| i++; | |
| } | |
| return (dev); | |
| } | |
| /*********************************************************************** | |
| * Misc Utilities | |
| ***********************************************************************/ | |
| static unsigned asmi_cfgsz (void) | |
| { | |
| unsigned sz = 0; | |
| unsigned char buf[128]; | |
| unsigned char *p; | |
| /* Read in the first 128 bytes of the device */ | |
| buf[0] = ASMI_READ_BYTES; | |
| buf[1] = 0; | |
| buf[2] = 0; | |
| buf[3] = 0; | |
| asmi_cs (1); | |
| asmi_snd (buf,4); | |
| asmi_rrcv (buf, sizeof(buf)); | |
| asmi_cs (0); | |
| /* Search for the starting 0x6a which is followed by the | |
| * 4-byte 'register' and 4-byte bit-count. | |
| */ | |
| p = buf; | |
| while (p < buf + sizeof(buf)-8) { | |
| if ( *p == 0x6a ) { | |
| /* Point to bit count and extract */ | |
| p += 5; | |
| sz = *p++; | |
| sz |= *p++ << 8; | |
| sz |= *p++ << 16; | |
| sz |= *p++ << 24; | |
| /* Convert to byte count */ | |
| sz += 7; | |
| sz >>= 3; | |
| } else if (*p == 0xff) { | |
| /* 0xff is ok ... just skip */ | |
| p++; | |
| continue; | |
| } else { | |
| /* Not 0xff or 0x6a ... something's not | |
| * right ... report 'unknown' (sz=0). | |
| */ | |
| break; | |
| } | |
| } | |
| return (sz); | |
| } | |
| static int asmi_erase (unsigned start, unsigned end) | |
| { | |
| unsigned off, sectsz; | |
| unsigned char buf[4]; | |
| struct asmi_devinfo_t *dev = asmi_dev_find (); | |
| if (!dev || (start>end)) | |
| return (-1); | |
| /* Erase the requested sectors. An address is required | |
| * that lies within the requested sector -- we'll just | |
| * use the first address in the sector. | |
| */ | |
| printf ("asmi erasing sector %d ", start); | |
| if (start != end) | |
| printf ("to %d ", end); | |
| sectsz = (1 << dev->sz_sect); | |
| while (start <= end) { | |
| off = start * sectsz; | |
| start++; | |
| buf[0] = ASMI_ERASE_SECT; | |
| buf[1] = off >> 16; | |
| buf[2] = off >> 8; | |
| buf[3] = off; | |
| asmi_wr_enable (); | |
| asmi_cs (1); | |
| asmi_snd (buf,4); | |
| asmi_cs (0); | |
| printf ("."); /* Some user feedback */ | |
| /* Wait for erase to complete */ | |
| while (asmi_status_rd() & ASMI_STATUS_WIP) | |
| ; | |
| } | |
| printf (" done.\n"); | |
| return (0); | |
| } | |
| static int asmi_read (ulong addr, ulong off, ulong cnt) | |
| { | |
| unsigned char buf[4]; | |
| buf[0] = ASMI_READ_BYTES; | |
| buf[1] = off >> 16; | |
| buf[2] = off >> 8; | |
| buf[3] = off; | |
| asmi_cs (1); | |
| asmi_snd (buf,4); | |
| asmi_rrcv ((unsigned char *)addr, cnt); | |
| asmi_cs (0); | |
| return (0); | |
| } | |
| static | |
| int asmi_write (ulong addr, ulong off, ulong cnt) | |
| { | |
| ulong wrcnt; | |
| unsigned pgsz; | |
| unsigned char buf[4]; | |
| struct asmi_devinfo_t *dev = asmi_dev_find (); | |
| if (!dev) | |
| return (-1); | |
| pgsz = (1<<dev->sz_page); | |
| while (cnt) { | |
| if (off % pgsz) | |
| wrcnt = pgsz - (off % pgsz); | |
| else | |
| wrcnt = pgsz; | |
| wrcnt = (wrcnt > cnt) ? cnt : wrcnt; | |
| buf[0] = ASMI_WRITE_BYTES; | |
| buf[1] = off >> 16; | |
| buf[2] = off >> 8; | |
| buf[3] = off; | |
| asmi_wr_enable (); | |
| asmi_cs (1); | |
| asmi_snd (buf,4); | |
| asmi_rsnd ((unsigned char *)addr, wrcnt); | |
| asmi_cs (0); | |
| /* Wait for write to complete */ | |
| while (asmi_status_rd() & ASMI_STATUS_WIP) | |
| ; | |
| cnt -= wrcnt; | |
| off += wrcnt; | |
| addr += wrcnt; | |
| } | |
| return (0); | |
| } | |
| static | |
| int asmi_verify (ulong addr, ulong off, ulong cnt, ulong *err) | |
| { | |
| ulong rdcnt; | |
| unsigned char buf[256]; | |
| unsigned char *start,*end; | |
| int i; | |
| start = end = (unsigned char *)addr; | |
| while (cnt) { | |
| rdcnt = (cnt>sizeof(buf)) ? sizeof(buf) : cnt; | |
| asmi_read ((ulong)buf, off, rdcnt); | |
| for (i=0; i<rdcnt; i++) { | |
| if (*end != buf[i]) { | |
| *err = end - start; | |
| return(-1); | |
| } | |
| end++; | |
| } | |
| cnt -= rdcnt; | |
| off += rdcnt; | |
| } | |
| return (0); | |
| } | |
| static int asmi_sect_erased (int sect, unsigned *offset, | |
| struct asmi_devinfo_t *dev) | |
| { | |
| unsigned char buf[128]; | |
| unsigned off, end; | |
| unsigned sectsz; | |
| int i; | |
| sectsz = (1 << dev->sz_sect); | |
| off = sectsz * sect; | |
| end = off + sectsz; | |
| while (off < end) { | |
| asmi_read ((ulong)buf, off, sizeof(buf)); | |
| for (i=0; i < sizeof(buf); i++) { | |
| if (buf[i] != 0xff) { | |
| *offset = off + i; | |
| return (0); | |
| } | |
| } | |
| off += sizeof(buf); | |
| } | |
| return (1); | |
| } | |
| /*********************************************************************** | |
| * Commands | |
| ***********************************************************************/ | |
| static | |
| void do_asmi_info (struct asmi_devinfo_t *dev, int argc, char *argv[]) | |
| { | |
| int i; | |
| unsigned char stat; | |
| unsigned tmp; | |
| int erased; | |
| /* Basic device info */ | |
| printf ("%s: %d kbytes (%d sectors x %d kbytes," | |
| " %d bytes/page)\n", | |
| dev->name, 1 << (dev->size-10), | |
| dev->num_sects, 1 << (dev->sz_sect-10), | |
| 1 << dev->sz_page ); | |
| /* Status -- for now protection is all-or-nothing */ | |
| stat = asmi_status_rd(); | |
| printf ("status: 0x%02x (WIP:%d, WEL:%d, PROT:%s)\n", | |
| stat, | |
| (stat & ASMI_STATUS_WIP) ? 1 : 0, | |
| (stat & ASMI_STATUS_WEL) ? 1 : 0, | |
| (stat & dev->prot_mask) ? "on" : "off" ); | |
| /* Configuration */ | |
| tmp = asmi_cfgsz (); | |
| if (tmp) { | |
| printf ("config: 0x%06x (%d) bytes\n", tmp, tmp ); | |
| } else { | |
| printf ("config: unknown\n" ); | |
| } | |
| /* Sector info */ | |
| for (i=0; i<dev->num_sects; i++) { | |
| erased = asmi_sect_erased (i, &tmp, dev); | |
| printf (" %d: %06x ", | |
| i, i*(1<<dev->sz_sect) ); | |
| if (erased) | |
| printf ("erased\n"); | |
| else | |
| printf ("data @ 0x%06x\n", tmp); | |
| } | |
| return; | |
| } | |
| static | |
| void do_asmi_erase (struct asmi_devinfo_t *dev, int argc, char *argv[]) | |
| { | |
| unsigned start,end; | |
| if ((argc < 3) || (argc > 4)) { | |
| printf ("USAGE: asmi erase sect [end]\n"); | |
| return; | |
| } | |
| if ((asmi_status_rd() & dev->prot_mask) != 0) { | |
| printf ( "asmi: device protected.\n"); | |
| return; | |
| } | |
| start = simple_strtoul (argv[2], NULL, 10); | |
| if (argc > 3) | |
| end = simple_strtoul (argv[3], NULL, 10); | |
| else | |
| end = start; | |
| if ((start >= dev->num_sects) || (start > end)) { | |
| printf ("asmi: invalid sector range: [%d:%d]\n", | |
| start, end ); | |
| return; | |
| } | |
| asmi_erase (start, end); | |
| return; | |
| } | |
| static | |
| void do_asmi_protect (struct asmi_devinfo_t *dev, int argc, char *argv[]) | |
| { | |
| unsigned char stat; | |
| /* For now protection is all-or-nothing to keep things | |
| * simple. The protection bits don't map in a linear | |
| * fashion ... and we would rather protect the bottom | |
| * of the device since it contains the config data and | |
| * leave the top unprotected for app use. But unfortunately | |
| * protection works from top-to-bottom so it does | |
| * really help very much from a software app point-of-view. | |
| */ | |
| if (argc < 3) { | |
| printf ("USAGE: asmi protect on | off\n"); | |
| return; | |
| } | |
| if (!dev) | |
| return; | |
| /* Protection on/off is just a matter of setting/clearing | |
| * all protection bits in the status register. | |
| */ | |
| stat = asmi_status_rd (); | |
| if (strcmp ("on", argv[2]) == 0) { | |
| stat |= dev->prot_mask; | |
| } else if (strcmp ("off", argv[2]) == 0 ) { | |
| stat &= ~dev->prot_mask; | |
| } else { | |
| printf ("asmi: unknown protection: %s\n", argv[2]); | |
| return; | |
| } | |
| asmi_status_wr (stat); | |
| return; | |
| } | |
| static | |
| void do_asmi_read (struct asmi_devinfo_t *dev, int argc, char *argv[]) | |
| { | |
| ulong addr,off,cnt; | |
| ulong sz; | |
| if (argc < 5) { | |
| printf ("USAGE: asmi read addr offset count\n"); | |
| return; | |
| } | |
| sz = 1 << dev->size; | |
| addr = simple_strtoul (argv[2], NULL, 16); | |
| off = simple_strtoul (argv[3], NULL, 16); | |
| cnt = simple_strtoul (argv[4], NULL, 16); | |
| if (off > sz) { | |
| printf ("offset is greater than device size" | |
| "... aborting.\n"); | |
| return; | |
| } | |
| if ((off + cnt) > sz) { | |
| printf ("request exceeds device size" | |
| "... truncating.\n"); | |
| cnt = sz - off; | |
| } | |
| printf ("asmi: read %08lx <- %06lx (0x%lx bytes)\n", | |
| addr, off, cnt); | |
| asmi_read (addr, off, cnt); | |
| return; | |
| } | |
| static | |
| void do_asmi_write (struct asmi_devinfo_t *dev, int argc, char *argv[]) | |
| { | |
| ulong addr,off,cnt; | |
| ulong sz; | |
| ulong err; | |
| if (argc < 5) { | |
| printf ("USAGE: asmi write addr offset count\n"); | |
| return; | |
| } | |
| if ((asmi_status_rd() & dev->prot_mask) != 0) { | |
| printf ( "asmi: device protected.\n"); | |
| return; | |
| } | |
| sz = 1 << dev->size; | |
| addr = simple_strtoul (argv[2], NULL, 16); | |
| off = simple_strtoul (argv[3], NULL, 16); | |
| cnt = simple_strtoul (argv[4], NULL, 16); | |
| if (off > sz) { | |
| printf ("offset is greater than device size" | |
| "... aborting.\n"); | |
| return; | |
| } | |
| if ((off + cnt) > sz) { | |
| printf ("request exceeds device size" | |
| "... truncating.\n"); | |
| cnt = sz - off; | |
| } | |
| printf ("asmi: write %08lx -> %06lx (0x%lx bytes)\n", | |
| addr, off, cnt); | |
| asmi_write (addr, off, cnt); | |
| if (asmi_verify (addr, off, cnt, &err) != 0) | |
| printf ("asmi: write error at offset %06lx\n", err); | |
| return; | |
| } | |
| static | |
| void do_asmi_verify (struct asmi_devinfo_t *dev, int argc, char *argv[]) | |
| { | |
| ulong addr,off,cnt; | |
| ulong sz; | |
| ulong err; | |
| if (argc < 5) { | |
| printf ("USAGE: asmi verify addr offset count\n"); | |
| return; | |
| } | |
| sz = 1 << dev->size; | |
| addr = simple_strtoul (argv[2], NULL, 16); | |
| off = simple_strtoul (argv[3], NULL, 16); | |
| cnt = simple_strtoul (argv[4], NULL, 16); | |
| if (off > sz) { | |
| printf ("offset is greater than device size" | |
| "... aborting.\n"); | |
| return; | |
| } | |
| if ((off + cnt) > sz) { | |
| printf ("request exceeds device size" | |
| "... truncating.\n"); | |
| cnt = sz - off; | |
| } | |
| printf ("asmi: verify %08lx -> %06lx (0x%lx bytes)\n", | |
| addr, off, cnt); | |
| if (asmi_verify (addr, off, cnt, &err) != 0) | |
| printf ("asmi: verify error at offset %06lx\n", err); | |
| return; | |
| } | |
| /*-----------------------------------------------------------------------*/ | |
| int do_asmi (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) | |
| { | |
| int len; | |
| struct asmi_devinfo_t *dev = asmi_dev_find (); | |
| if (argc < 2) { | |
| printf ("Usage:%s", LONG_HELP); | |
| return (0); | |
| } | |
| if (!dev) { | |
| printf ("asmi: device not found.\n"); | |
| return (0); | |
| } | |
| len = strlen (argv[1]); | |
| if (strncmp ("info", argv[1], len) == 0) { | |
| do_asmi_info ( dev, argc, argv); | |
| } else if (strncmp ("erase", argv[1], len) == 0) { | |
| do_asmi_erase (dev, argc, argv); | |
| } else if (strncmp ("protect", argv[1], len) == 0) { | |
| do_asmi_protect (dev, argc, argv); | |
| } else if (strncmp ("read", argv[1], len) == 0) { | |
| do_asmi_read (dev, argc, argv); | |
| } else if (strncmp ("write", argv[1], len) == 0) { | |
| do_asmi_write (dev, argc, argv); | |
| } else if (strncmp ("verify", argv[1], len) == 0) { | |
| do_asmi_verify (dev, argc, argv); | |
| } else { | |
| printf ("asmi: unknown operation: %s\n", argv[1]); | |
| } | |
| return (0); | |
| } | |
| /*-----------------------------------------------------------------------*/ | |
| U_BOOT_CMD( asmi, 5, 0, do_asmi, SHORT_HELP, LONG_HELP ); | |
| #endif /* CONFIG_NIOS_ASMI */ |