| #ifndef __HW_S3C4510_H | |
| #define __HW_S3C4510_H | |
| /* | |
| * Copyright (c) 2004 Cucy Systems (http://www.cucy.com) | |
| * Curt Brune <curt@cucy.com> | |
| * | |
| * See file CREDITS for list of people who contributed to this | |
| * project. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation; either version 2 of | |
| * the License, or (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
| * MA 02111-1307 USA | |
| * | |
| * Description: Samsung S3C4510B register layout | |
| */ | |
| /*------------------------------------------------------------------------ | |
| * ASIC Address Definition | |
| *----------------------------------------------------------------------*/ | |
| /* L1 8KB on chip SRAM base address */ | |
| #define SRAM_BASE (0x03fe0000) | |
| /* Special Register Start Address After System Reset */ | |
| #define REG_BASE (0x03ff0000) | |
| #define SPSTR (REG_BASE) | |
| /* *********************** */ | |
| /* System Manager Register */ | |
| /* *********************** */ | |
| #define REG_SYSCFG (REG_BASE+0x0000) | |
| #define REG_CLKCON (REG_BASE+0x3000) | |
| #define REG_EXTACON0 (REG_BASE+0x3008) | |
| #define REG_EXTACON1 (REG_BASE+0x300c) | |
| #define REG_EXTDBWTH (REG_BASE+0x3010) | |
| #define REG_ROMCON0 (REG_BASE+0x3014) | |
| #define REG_ROMCON1 (REG_BASE+0x3018) | |
| #define REG_ROMCON2 (REG_BASE+0x301c) | |
| #define REG_ROMCON3 (REG_BASE+0x3020) | |
| #define REG_ROMCON4 (REG_BASE+0x3024) | |
| #define REG_ROMCON5 (REG_BASE+0x3028) | |
| #define REG_DRAMCON0 (REG_BASE+0x302c) | |
| #define REG_DRAMCON1 (REG_BASE+0x3030) | |
| #define REG_DRAMCON2 (REG_BASE+0x3034) | |
| #define REG_DRAMCON3 (REG_BASE+0x3038) | |
| #define REG_REFEXTCON (REG_BASE+0x303c) | |
| /* *********************** */ | |
| /* Ethernet BDMA Register */ | |
| /* *********************** */ | |
| #define REG_BDMATXCON (REG_BASE+0x9000) | |
| #define REG_BDMARXCON (REG_BASE+0x9004) | |
| #define REG_BDMATXPTR (REG_BASE+0x9008) | |
| #define REG_BDMARXPTR (REG_BASE+0x900c) | |
| #define REG_BDMARXLSZ (REG_BASE+0x9010) | |
| #define REG_BDMASTAT (REG_BASE+0x9014) | |
| /* Content Address Memory */ | |
| #define REG_CAM_BASE (REG_BASE+0x9100) | |
| #define REG_BDMATXBUF (REG_BASE+0x9200) | |
| #define REG_BDMARXBUF (REG_BASE+0x9800) | |
| /* *********************** */ | |
| /* Ethernet MAC Register */ | |
| /* *********************** */ | |
| #define REG_MACCON (REG_BASE+0xa000) | |
| #define REG_CAMCON (REG_BASE+0xa004) | |
| #define REG_MACTXCON (REG_BASE+0xa008) | |
| #define REG_MACTXSTAT (REG_BASE+0xa00c) | |
| #define REG_MACRXCON (REG_BASE+0xa010) | |
| #define REG_MACRXSTAT (REG_BASE+0xa014) | |
| #define REG_STADATA (REG_BASE+0xa018) | |
| #define REG_STACON (REG_BASE+0xa01c) | |
| #define REG_CAMEN (REG_BASE+0xa028) | |
| #define REG_EMISSCNT (REG_BASE+0xa03c) | |
| #define REG_EPZCNT (REG_BASE+0xa040) | |
| #define REG_ERMPZCNT (REG_BASE+0xa044) | |
| #define REG_ETXSTAT (REG_BASE+0x9040) | |
| #define REG_MACRXDESTR (REG_BASE+0xa064) | |
| #define REG_MACRXSTATEM (REG_BASE+0xa090) | |
| #define REG_MACRXFIFO (REG_BASE+0xa200) | |
| /********************/ | |
| /* I2C Bus Register */ | |
| /********************/ | |
| #define REG_I2C_CON (REG_BASE+0xf000) | |
| #define REG_I2C_BUF (REG_BASE+0xf004) | |
| #define REG_I2C_PS (REG_BASE+0xf008) | |
| #define REG_I2C_COUNT (REG_BASE+0xf00c) | |
| /********************/ | |
| /* GDMA 0 */ | |
| /********************/ | |
| #define REG_GDMACON0 (REG_BASE+0xb000) | |
| #define REG_GDMA0_RUN_ENABLE (REG_BASE+0xb020) | |
| #define REG_GDMASRC0 (REG_BASE+0xb004) | |
| #define REG_GDMADST0 (REG_BASE+0xb008) | |
| #define REG_GDMACNT0 (REG_BASE+0xb00c) | |
| /********************/ | |
| /* GDMA 1 */ | |
| /********************/ | |
| #define REG_GDMACON1 (REG_BASE+0xc000) | |
| #define REG_GDMA1_RUN_ENABLE (REG_BASE+0xc020) | |
| #define REG_GDMASRC1 (REG_BASE+0xc004) | |
| #define REG_GDMADST1 (REG_BASE+0xc008) | |
| #define REG_GDMACNT1 (REG_BASE+0xc00c) | |
| /********************/ | |
| /* UART 0 */ | |
| /********************/ | |
| #define UART0_BASE (REG_BASE+0xd000) | |
| #define REG_UART0_LCON (REG_BASE+0xd000) | |
| #define REG_UART0_CTRL (REG_BASE+0xd004) | |
| #define REG_UART0_STAT (REG_BASE+0xd008) | |
| #define REG_UART0_TXB (REG_BASE+0xd00c) | |
| #define REG_UART0_RXB (REG_BASE+0xd010) | |
| #define REG_UART0_BAUD_DIV (REG_BASE+0xd014) | |
| #define REG_UART0_BAUD_CNT (REG_BASE+0xd018) | |
| #define REG_UART0_BAUD_CLK (REG_BASE+0xd01C) | |
| /********************/ | |
| /* UART 1 */ | |
| /********************/ | |
| #define UART1_BASE (REG_BASE+0xe000) | |
| #define REG_UART1_LCON (REG_BASE+0xe000) | |
| #define REG_UART1_CTRL (REG_BASE+0xe004) | |
| #define REG_UART1_STAT (REG_BASE+0xe008) | |
| #define REG_UART1_TXB (REG_BASE+0xe00c) | |
| #define REG_UART1_RXB (REG_BASE+0xe010) | |
| #define REG_UART1_BAUD_DIV (REG_BASE+0xe014) | |
| #define REG_UART1_BAUD_CNT (REG_BASE+0xe018) | |
| #define REG_UART1_BAUD_CLK (REG_BASE+0xe01C) | |
| /********************/ | |
| /* Timer Register */ | |
| /********************/ | |
| #define REG_TMOD (REG_BASE+0x6000) | |
| #define REG_TDATA0 (REG_BASE+0x6004) | |
| #define REG_TDATA1 (REG_BASE+0x6008) | |
| #define REG_TCNT0 (REG_BASE+0x600c) | |
| #define REG_TCNT1 (REG_BASE+0x6010) | |
| /**********************/ | |
| /* I/O Port Interface */ | |
| /**********************/ | |
| #define REG_IOPMODE (REG_BASE+0x5000) | |
| #define REG_IOPCON (REG_BASE+0x5004) | |
| #define REG_IOPDATA (REG_BASE+0x5008) | |
| /*********************************/ | |
| /* Interrupt Controller Register */ | |
| /*********************************/ | |
| #define REG_INTMODE (REG_BASE+0x4000) | |
| #define REG_INTPEND (REG_BASE+0x4004) | |
| #define REG_INTMASK (REG_BASE+0x4008) | |
| #define REG_INTPRI0 (REG_BASE+0x400c) | |
| #define REG_INTPRI1 (REG_BASE+0x4010) | |
| #define REG_INTPRI2 (REG_BASE+0x4014) | |
| #define REG_INTPRI3 (REG_BASE+0x4018) | |
| #define REG_INTPRI4 (REG_BASE+0x401c) | |
| #define REG_INTPRI5 (REG_BASE+0x4020) | |
| #define REG_INTOFFSET (REG_BASE+0x4024) | |
| #define REG_INTPNDPRI (REG_BASE+0x4028) | |
| #define REG_INTPNDTST (REG_BASE+0x402C) | |
| /*********************************/ | |
| /* CACHE CONTROL MASKS */ | |
| /*********************************/ | |
| #define CACHE_STALL (0x00000001) | |
| #define CACHE_ENABLE (0x00000002) | |
| #define CACHE_WRITE_BUFF (0x00000004) | |
| #define CACHE_MODE (0x00000030) | |
| #define CACHE_MODE_00 (0x00000000) | |
| #define CACHE_MODE_01 (0x00000010) | |
| #define CACHE_MODE_10 (0x00000020) | |
| /*********************************/ | |
| /* CACHE RAM BASE ADDRESSES */ | |
| /*********************************/ | |
| #define CACHE_SET0_RAM (0x10000000) | |
| #define CACHE_SET1_RAM (0x10800000) | |
| #define CACHE_TAG_RAM (0x11000000) | |
| /*********************************/ | |
| /* CACHE_DISABLE MASK */ | |
| /*********************************/ | |
| #define CACHE_DISABLE_MASK (0x04000000) | |
| #define GET_REG(reg) (*((volatile u32 *)(reg))) | |
| #define PUT_REG(reg, val) (*((volatile u32 *)(reg)) = ((u32)(val))) | |
| #define SET_REG(reg, mask) (PUT_REG((reg), GET_REG((reg)) | mask)) | |
| #define CLR_REG(reg, mask) (PUT_REG((reg), GET_REG((reg)) & ~mask)) | |
| #define PUT_U16(reg, val) (*((volatile u16 *)(reg)) = ((u16)(val))) | |
| #define PUT__U8(reg, val) (*((volatile u8 *)(reg)) = (( u8)((val)&0xFF))) | |
| #define GET__U8(reg) (*((volatile u8 *)(reg))) | |
| #define PUT_LED(val) (PUT_REG(REG_IOPDATA, (~val)&0xFF)) | |
| #define GET_LED() ((~GET_REG( REG_IOPDATA)) & 0xFF) | |
| #define SET_LED(val) { u32 led = GET_LED(); led |= 1 << (val); PUT_LED( led); } | |
| #define CLR_LED(val) { u32 led = GET_LED(); led &= ~(1 << (val)); PUT_LED( led); } | |
| /***********************************/ | |
| /* CLOCK CONSTANTS -- 50 MHz Clock */ | |
| /***********************************/ | |
| #define CLK_FREQ_MHZ (50) | |
| #define t_data_us(t) ((t)*CLK_FREQ_MHZ-1) /* t is time tick,unit[us] */ | |
| #define t_data_ms(t) (t_data_us((t)*1000)) /* t is time tick,unit[ms] */ | |
| /*********************************************************/ | |
| /* TIMER MODE REGISTER */ | |
| /*********************************************************/ | |
| #define TM0_RUN 0x01 /* Timer 0 enable */ | |
| #define TM0_TOGGLE 0x02 /* 0, interval mode */ | |
| #define TM0_OUT_1 0x04 /* Timer 0 Initial TOUT0 value */ | |
| #define TM1_RUN 0x08 /* Timer 1 enable */ | |
| #define TM1_TOGGLE 0x10 /* 0, interval mode */ | |
| #define TM1_OUT_1 0x20 /* Timer 0 Initial TOUT0 value */ | |
| /*********************************/ | |
| /* INTERRUPT SOURCES */ | |
| /*********************************/ | |
| #define INT_EXTINT0 0 | |
| #define INT_EXTINT1 1 | |
| #define INT_EXTINT2 2 | |
| #define INT_EXTINT3 3 | |
| #define INT_UARTTX0 4 | |
| #define INT_UARTRX0 5 | |
| #define INT_UARTTX1 6 | |
| #define INT_UARTRX1 7 | |
| #define INT_GDMA0 8 | |
| #define INT_GDMA1 9 | |
| #define INT_TIMER0 10 | |
| #define INT_TIMER1 11 | |
| #define INT_HDLCTXA 12 | |
| #define INT_HDLCRXA 13 | |
| #define INT_HDLCTXB 14 | |
| #define INT_HDLCRXB 15 | |
| #define INT_BDMATX 16 | |
| #define INT_BDMARX 17 | |
| #define INT_MACTX 18 | |
| #define INT_MACRX 19 | |
| #define INT_IIC 20 | |
| #define INT_GLOBAL 21 | |
| #define N_IRQS (21) | |
| #ifndef __ASSEMBLER__ | |
| struct _irq_handler { | |
| void *m_data; | |
| void (*m_func)( void *data); | |
| }; | |
| extern struct _irq_handler IRQ_HANDLER[]; | |
| #endif | |
| #endif /* __S3C4510_h */ |