| /* |
| * (C) Copyright 2003 |
| * Gerry Hamel, geh@ti.com, Texas Instruments |
| * |
| * (C) Copyright 2006 |
| * Bryan O'Donoghue, bodonoghue@codehermit.ie, CodeHermit |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| */ |
| |
| #ifndef __USB_TTY_H__ |
| #define __USB_TTY_H__ |
| |
| #include <usbdevice.h> |
| #if defined(CONFIG_PPC) |
| #include <usb/mpc8xx_udc.h> |
| #elif defined(CONFIG_OMAP1510) |
| #include <usb/omap1510_udc.h> |
| #elif defined(CONFIG_MUSB_UDC) |
| #include <usb/musb_udc.h> |
| #elif defined(CONFIG_PXA27X) |
| #include <usb/pxa27x_udc.h> |
| #elif defined(CONFIG_SPEAR3XX) || defined(CONFIG_SPEAR600) |
| #include <usb/spr_udc.h> |
| #endif |
| |
| #include <version_autogenerated.h> |
| |
| /* If no VendorID/ProductID is defined in config.h, pretend to be Linux |
| * DO NOT Reuse this Vendor/Product setup with protocol incompatible devices */ |
| |
| #ifndef CONFIG_USBD_VENDORID |
| #define CONFIG_USBD_VENDORID 0x0525 /* Linux/NetChip */ |
| #endif |
| #ifndef CONFIG_USBD_PRODUCTID_GSERIAL |
| #define CONFIG_USBD_PRODUCTID_GSERIAL 0xa4a6 /* gserial */ |
| #endif |
| #ifndef CONFIG_USBD_PRODUCTID_CDCACM |
| #define CONFIG_USBD_PRODUCTID_CDCACM 0xa4a7 /* CDC ACM */ |
| #endif |
| #ifndef CONFIG_USBD_MANUFACTURER |
| #define CONFIG_USBD_MANUFACTURER "Das U-Boot" |
| #endif |
| #ifndef CONFIG_USBD_PRODUCT_NAME |
| #define CONFIG_USBD_PRODUCT_NAME U_BOOT_VERSION |
| #endif |
| |
| #ifndef CONFIG_USBD_CONFIGURATION_STR |
| #define CONFIG_USBD_CONFIGURATION_STR "TTY via USB" |
| #endif |
| |
| #define CONFIG_USBD_SERIAL_OUT_ENDPOINT UDC_OUT_ENDPOINT |
| #define CONFIG_USBD_SERIAL_OUT_PKTSIZE UDC_OUT_PACKET_SIZE |
| #define CONFIG_USBD_SERIAL_IN_ENDPOINT UDC_IN_ENDPOINT |
| #define CONFIG_USBD_SERIAL_IN_PKTSIZE UDC_IN_PACKET_SIZE |
| #define CONFIG_USBD_SERIAL_INT_ENDPOINT UDC_INT_ENDPOINT |
| #define CONFIG_USBD_SERIAL_INT_PKTSIZE UDC_INT_PACKET_SIZE |
| #define CONFIG_USBD_SERIAL_BULK_PKTSIZE UDC_BULK_PACKET_SIZE |
| |
| #define USBTTY_DEVICE_CLASS COMMUNICATIONS_DEVICE_CLASS |
| |
| #define USBTTY_BCD_DEVICE 0x00 |
| #define USBTTY_MAXPOWER 0x00 |
| |
| #define STR_LANG 0x00 |
| #define STR_MANUFACTURER 0x01 |
| #define STR_PRODUCT 0x02 |
| #define STR_SERIAL 0x03 |
| #define STR_CONFIG 0x04 |
| #define STR_DATA_INTERFACE 0x05 |
| #define STR_CTRL_INTERFACE 0x06 |
| #define STR_COUNT 0x07 |
| |
| #endif |
