| /* | 
 |  * (C) Copyright 2007 | 
 |  * Michael Schwingen, michael@schwingen.org | 
 |  * | 
 |  * hardware register definitions for the AcTux-3 board. | 
 |  * | 
 |  * See file CREDITS for list of people who contributed to this | 
 |  * project. | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or | 
 |  * modify it under the terms of the GNU General Public License as | 
 |  * published by the Free Software Foundation; either version 2 of | 
 |  * the License, or (at your option) any later version. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | 
 |  * GNU General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program; if not, write to the Free Software | 
 |  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | 
 |  * MA 02111-1307 USA | 
 |  */ | 
 |  | 
 | #ifndef _ACTUX3_HW_H | 
 | #define _ACTUX3_HW_H | 
 |  | 
 | /* 0 = LED off,1 = ON */ | 
 | #define ACTUX3_LED1_RT(a)	writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 0) | 
 | #define ACTUX3_LED1_GN(a)	writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 1) | 
 | #define ACTUX3_LED2_RT(a)	writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 2) | 
 | #define ACTUX3_LED2_GN(a)	writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 3) | 
 | #define ACTUX3_LED3_RT(a)	writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 4) | 
 | #define ACTUX3_LED3_GN(a)	writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 5) | 
 | #define ACTUX3_LED4_GN(a)	writeb((a)^1, IXP425_EXP_BUS_CS7_BASE_PHYS + 6) | 
 | #define ACTUX3_LED5_RT(a)	writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 7) | 
 |  | 
 | #define ACTUX3_DBG_PORT		IXP425_EXP_BUS_CS5_BASE_PHYS | 
 | #define ACTUX3_BOARDREL		(readb(IXP425_EXP_BUS_CS6_BASE_PHYS) & 0x0F) | 
 | #define ACTUX3_OPTION		(readb(IXP425_EXP_BUS_CS6_BASE_PHYS) & 0xF0) | 
 |  | 
 | /* GPIO settings */ | 
 | #define CONFIG_SYS_GPIO_DBGINT			0 | 
 | #define CONFIG_SYS_GPIO_ETHINT			1 | 
 | #define CONFIG_SYS_GPIO_ETHRST			2	/* Out */ | 
 | #define CONFIG_SYS_GPIO_LED5_GN		3	/* Out */ | 
 | #define CONFIG_SYS_GPIO_LED6_RT		4	/* Out */ | 
 | #define CONFIG_SYS_GPIO_LED6_GN		5	/* Out */ | 
 | #define CONFIG_SYS_GPIO_DSR			6	/* Out */ | 
 | #define CONFIG_SYS_GPIO_DCD			7	/* Out */ | 
 | #define CONFIG_SYS_GPIO_DBGJUMPER		9 | 
 | #define CONFIG_SYS_GPIO_BUTTON1		10 | 
 | #define CONFIG_SYS_GPIO_DBGSENSE		11 | 
 | #define CONFIG_SYS_GPIO_DTR			12 | 
 | #define CONFIG_SYS_GPIO_IORST			13	/* Out */ | 
 | #define CONFIG_SYS_GPIO_PCI_CLK		14	/* Out */ | 
 | #define CONFIG_SYS_GPIO_EXTBUS_CLK		15	/* Out */ | 
 |  | 
 | #endif |