| /* |
| * DP83848 ethernet Physical layer |
| * |
| * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> |
| * |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| |
| /* National Semiconductor PHYSICAL LAYER TRANSCEIVER DP83848 */ |
| |
| #define DP83848_CTL_REG 0x0 /* Basic Mode Control Reg */ |
| #define DP83848_STAT_REG 0x1 /* Basic Mode Status Reg */ |
| #define DP83848_PHYID1_REG 0x2 /* PHY Idendifier Reg 1 */ |
| #define DP83848_PHYID2_REG 0x3 /* PHY Idendifier Reg 2 */ |
| #define DP83848_ANA_REG 0x4 /* Auto_Neg Advt Reg */ |
| #define DP83848_ANLPA_REG 0x5 /* Auto_neg Link Partner Ability Reg */ |
| #define DP83848_ANE_REG 0x6 /* Auto-neg Expansion Reg */ |
| #define DP83848_PHY_STAT_REG 0x10 /* PHY Status Register */ |
| #define DP83848_PHY_INTR_CTRL_REG 0x11 /* PHY Interrupt Control Register */ |
| #define DP83848_PHY_CTRL_REG 0x19 /* PHY Status Register */ |
| |
| /*--Bit definitions: DP83848_CTL_REG */ |
| #define DP83848_RESET (1 << 15) /* 1= S/W Reset */ |
| #define DP83848_LOOPBACK (1 << 14) /* 1=loopback Enabled */ |
| #define DP83848_SPEED_SELECT (1 << 13) |
| #define DP83848_AUTONEG (1 << 12) |
| #define DP83848_POWER_DOWN (1 << 11) |
| #define DP83848_ISOLATE (1 << 10) |
| #define DP83848_RESTART_AUTONEG (1 << 9) |
| #define DP83848_DUPLEX_MODE (1 << 8) |
| #define DP83848_COLLISION_TEST (1 << 7) |
| |
| /*--Bit definitions: DP83848_STAT_REG */ |
| #define DP83848_100BASE_T4 (1 << 15) |
| #define DP83848_100BASE_TX_FD (1 << 14) |
| #define DP83848_100BASE_TX_HD (1 << 13) |
| #define DP83848_10BASE_T_FD (1 << 12) |
| #define DP83848_10BASE_T_HD (1 << 11) |
| #define DP83848_MF_PREAMB_SUPPR (1 << 6) |
| #define DP83848_AUTONEG_COMP (1 << 5) |
| #define DP83848_RMT_FAULT (1 << 4) |
| #define DP83848_AUTONEG_ABILITY (1 << 3) |
| #define DP83848_LINK_STATUS (1 << 2) |
| #define DP83848_JABBER_DETECT (1 << 1) |
| #define DP83848_EXTEND_CAPAB (1 << 0) |
| |
| /*--definitions: DP83848_PHYID1 */ |
| #define DP83848_PHYID1_OUI 0x2000 |
| #define DP83848_PHYID2_OUI 0x5c90 |
| |
| /*--Bit definitions: DP83848_ANAR, DP83848_ANLPAR */ |
| #define DP83848_NP (1 << 15) |
| #define DP83848_ACK (1 << 14) |
| #define DP83848_RF (1 << 13) |
| #define DP83848_PAUSE (1 << 10) |
| #define DP83848_T4 (1 << 9) |
| #define DP83848_TX_FDX (1 << 8) |
| #define DP83848_TX_HDX (1 << 7) |
| #define DP83848_10_FDX (1 << 6) |
| #define DP83848_10_HDX (1 << 5) |
| #define DP83848_AN_IEEE_802_3 0x0001 |
| |
| /*--Bit definitions: DP83848_ANER */ |
| #define DP83848_PDF (1 << 4) |
| #define DP83848_LP_NP_ABLE (1 << 3) |
| #define DP83848_NP_ABLE (1 << 2) |
| #define DP83848_PAGE_RX (1 << 1) |
| #define DP83848_LP_AN_ABLE (1 << 0) |
| |
| /*--Bit definitions: DP83848_PHY_STAT */ |
| #define DP83848_RX_ERR_LATCH (1 << 13) |
| #define DP83848_POLARITY_STAT (1 << 12) |
| #define DP83848_FALSE_CAR_SENSE (1 << 11) |
| #define DP83848_SIG_DETECT (1 << 10) |
| #define DP83848_DESCRAM_LOCK (1 << 9) |
| #define DP83848_PAGE_RCV (1 << 8) |
| #define DP83848_PHY_RMT_FAULT (1 << 6) |
| #define DP83848_JABBER (1 << 5) |
| #define DP83848_AUTONEG_COMPLETE (1 << 4) |
| #define DP83848_LOOPBACK_STAT (1 << 3) |
| #define DP83848_DUPLEX (1 << 2) |
| #define DP83848_SPEED (1 << 1) |
| #define DP83848_LINK (1 << 0) |
