| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * efi_selftest_devicepath |
| * |
| * Copyright (c) 2017 Heinrich Schuchardt <xypron.glpk@gmx.de> |
| * |
| * This unit test checks the following protocol services: |
| * DevicePathToText |
| */ |
| |
| #include <efi_selftest.h> |
| |
| static struct efi_boot_services *boottime; |
| |
| static efi_handle_t handle1; |
| static efi_handle_t handle2; |
| static efi_handle_t handle3; |
| |
| struct interface { |
| void (EFIAPI * inc)(void); |
| } interface; |
| |
| static efi_guid_t guid_device_path = DEVICE_PATH_GUID; |
| |
| static efi_guid_t guid_device_path_to_text_protocol = |
| EFI_DEVICE_PATH_TO_TEXT_PROTOCOL_GUID; |
| |
| static efi_guid_t guid_protocol = |
| EFI_GUID(0xdbca4c98, 0x6cb0, 0x694d, |
| 0x08, 0x72, 0x81, 0x9c, 0x65, 0x0c, 0xbb, 0x7d); |
| |
| static efi_guid_t guid_vendor1 = |
| EFI_GUID(0xdbca4c98, 0x6cb0, 0x694d, |
| 0x08, 0x72, 0x81, 0x9c, 0x65, 0x0c, 0xbb, 0xb1); |
| |
| static efi_guid_t guid_vendor2 = |
| EFI_GUID(0xdbca4c98, 0x6cb0, 0x694d, |
| 0x08, 0x72, 0x81, 0x9c, 0x65, 0x0c, 0xbb, 0xa2); |
| |
| static efi_guid_t guid_vendor3 = |
| EFI_GUID(0xdbca4c98, 0x6cb0, 0x694d, |
| 0x08, 0x72, 0x81, 0x9c, 0x65, 0x0c, 0xbb, 0xc3); |
| |
| static u8 *dp1; |
| static u8 *dp2; |
| static u8 *dp3; |
| |
| struct efi_device_path_to_text_protocol *device_path_to_text; |
| |
| /* |
| * Setup unit test. |
| * |
| * Create three handles. Install a new protocol on two of them and |
| * provide device paths. |
| * |
| * handle1 |
| * guid interface |
| * handle2 |
| * guid interface |
| * handle3 |
| * |
| * @handle: handle of the loaded image |
| * @systable: system table |
| */ |
| static int setup(const efi_handle_t img_handle, |
| const struct efi_system_table *systable) |
| { |
| struct efi_device_path_vendor vendor_node; |
| struct efi_device_path end_node; |
| efi_status_t ret; |
| |
| boottime = systable->boottime; |
| |
| ret = boottime->locate_protocol(&guid_device_path_to_text_protocol, |
| NULL, (void **)&device_path_to_text); |
| if (ret != EFI_SUCCESS) { |
| device_path_to_text = NULL; |
| efi_st_error( |
| "Device path to text protocol is not available.\n"); |
| return EFI_ST_FAILURE; |
| } |
| |
| ret = boottime->allocate_pool(EFI_LOADER_DATA, |
| sizeof(struct efi_device_path_vendor) + |
| sizeof(struct efi_device_path), |
| (void **)&dp1); |
| if (ret != EFI_SUCCESS) |
| goto out_of_memory; |
| |
| ret = boottime->allocate_pool(EFI_LOADER_DATA, 2 * |
| sizeof(struct efi_device_path_vendor) + |
| sizeof(struct efi_device_path), |
| (void **)&dp2); |
| if (ret != EFI_SUCCESS) |
| goto out_of_memory; |
| |
| ret = boottime->allocate_pool(EFI_LOADER_DATA, 3 * |
| sizeof(struct efi_device_path_vendor) + |
| sizeof(struct efi_device_path), |
| (void **)&dp3); |
| if (ret != EFI_SUCCESS) |
| goto out_of_memory; |
| |
| vendor_node.dp.type = DEVICE_PATH_TYPE_HARDWARE_DEVICE; |
| vendor_node.dp.sub_type = DEVICE_PATH_SUB_TYPE_VENDOR; |
| vendor_node.dp.length = sizeof(struct efi_device_path_vendor); |
| |
| boottime->copy_mem(&vendor_node.guid, &guid_vendor1, |
| sizeof(efi_guid_t)); |
| boottime->copy_mem(dp1, &vendor_node, |
| sizeof(struct efi_device_path_vendor)); |
| boottime->copy_mem(dp2, &vendor_node, |
| sizeof(struct efi_device_path_vendor)); |
| boottime->copy_mem(dp3, &vendor_node, |
| sizeof(struct efi_device_path_vendor)); |
| |
| boottime->copy_mem(&vendor_node.guid, &guid_vendor2, |
| sizeof(efi_guid_t)); |
| boottime->copy_mem(dp2 + sizeof(struct efi_device_path_vendor), |
| &vendor_node, sizeof(struct efi_device_path_vendor)); |
| boottime->copy_mem(dp3 + sizeof(struct efi_device_path_vendor), |
| &vendor_node, sizeof(struct efi_device_path_vendor)); |
| |
| boottime->copy_mem(&vendor_node.guid, &guid_vendor3, |
| sizeof(efi_guid_t)); |
| boottime->copy_mem(dp3 + 2 * sizeof(struct efi_device_path_vendor), |
| &vendor_node, sizeof(struct efi_device_path_vendor)); |
| |
| end_node.type = DEVICE_PATH_TYPE_END; |
| end_node.sub_type = DEVICE_PATH_SUB_TYPE_END; |
| end_node.length = sizeof(struct efi_device_path); |
| boottime->copy_mem(dp1 + sizeof(struct efi_device_path_vendor), |
| &end_node, sizeof(struct efi_device_path)); |
| boottime->copy_mem(dp2 + 2 * sizeof(struct efi_device_path_vendor), |
| &end_node, sizeof(struct efi_device_path)); |
| boottime->copy_mem(dp3 + 3 * sizeof(struct efi_device_path_vendor), |
| &end_node, sizeof(struct efi_device_path)); |
| |
| ret = boottime->install_protocol_interface(&handle1, |
| &guid_device_path, |
| EFI_NATIVE_INTERFACE, |
| dp1); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("InstallProtocolInterface failed\n"); |
| return EFI_ST_FAILURE; |
| } |
| ret = boottime->install_protocol_interface(&handle1, |
| &guid_protocol, |
| EFI_NATIVE_INTERFACE, |
| &interface); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("InstallProtocolInterface failed\n"); |
| return EFI_ST_FAILURE; |
| } |
| ret = boottime->install_protocol_interface(&handle2, |
| &guid_device_path, |
| EFI_NATIVE_INTERFACE, |
| dp2); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("InstallProtocolInterface failed\n"); |
| return EFI_ST_FAILURE; |
| } |
| ret = boottime->install_protocol_interface(&handle2, |
| &guid_protocol, |
| EFI_NATIVE_INTERFACE, |
| &interface); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("InstallProtocolInterface failed\n"); |
| return EFI_ST_FAILURE; |
| } |
| ret = boottime->install_protocol_interface(&handle3, |
| &guid_device_path, |
| EFI_NATIVE_INTERFACE, |
| dp3); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("InstallProtocolInterface failed\n"); |
| return EFI_ST_FAILURE; |
| } |
| return EFI_ST_SUCCESS; |
| |
| out_of_memory: |
| efi_st_error("Out of memory\n"); |
| return EFI_ST_FAILURE; |
| } |
| |
| /* |
| * Tear down unit test. |
| * |
| */ |
| static int teardown(void) |
| { |
| efi_status_t ret; |
| |
| ret = boottime->uninstall_protocol_interface(handle1, |
| &guid_device_path, |
| dp1); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("UninstallProtocolInterface failed\n"); |
| return EFI_ST_FAILURE; |
| } |
| ret = boottime->uninstall_protocol_interface(handle1, |
| &guid_protocol, |
| &interface); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("UninstallProtocolInterface failed\n"); |
| return EFI_ST_FAILURE; |
| } |
| ret = boottime->uninstall_protocol_interface(handle2, |
| &guid_device_path, |
| dp2); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("UninstallProtocolInterface failed\n"); |
| return EFI_ST_FAILURE; |
| } |
| ret = boottime->uninstall_protocol_interface(handle2, |
| &guid_protocol, |
| &interface); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("UninstallProtocolInterface failed\n"); |
| return EFI_ST_FAILURE; |
| } |
| ret = boottime->uninstall_protocol_interface(handle3, |
| &guid_device_path, |
| dp3); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("UninstallProtocolInterface failed\n"); |
| return EFI_ST_FAILURE; |
| } |
| if (dp1) { |
| ret = boottime->free_pool(dp1); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("FreePool failed\n"); |
| return EFI_ST_FAILURE; |
| } |
| } |
| if (dp2) { |
| ret = boottime->free_pool(dp2); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("FreePool failed\n"); |
| return EFI_ST_FAILURE; |
| } |
| } |
| if (dp3) { |
| ret = boottime->free_pool(dp3); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("FreePool failed\n"); |
| return EFI_ST_FAILURE; |
| } |
| } |
| return EFI_ST_SUCCESS; |
| } |
| |
| /* |
| * Execute unit test. |
| * |
| */ |
| static int execute(void) |
| { |
| struct efi_device_path *remaining_dp; |
| void *handle; |
| /* |
| * This device path node ends with the letter 't' of 'u-boot'. |
| * The following '.bin' does not belong to the node but is |
| * helps to test the correct truncation. |
| */ |
| struct { |
| struct efi_device_path dp; |
| u16 text[12]; |
| } __packed dp_node = { |
| { DEVICE_PATH_TYPE_MEDIA_DEVICE, |
| DEVICE_PATH_SUB_TYPE_FILE_PATH, |
| sizeof(struct efi_device_path) + 12}, |
| L"u-boot.bin", |
| }; |
| u16 *string; |
| efi_status_t ret; |
| efi_uintn_t i, no_handles; |
| efi_handle_t *handles; |
| struct efi_device_path *dp; |
| |
| /* Display all available device paths */ |
| ret = boottime->locate_handle_buffer(BY_PROTOCOL, |
| &guid_device_path, |
| NULL, &no_handles, &handles); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("Cannot retrieve device path protocols.\n"); |
| return EFI_ST_FAILURE; |
| } |
| |
| efi_st_printf("Installed device path protocols:\n"); |
| for (i = 0; i < no_handles; ++i) { |
| ret = boottime->open_protocol(handles[i], &guid_device_path, |
| (void **)&dp, NULL, NULL, |
| EFI_OPEN_PROTOCOL_GET_PROTOCOL); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("Cannot open device path protocol.\n"); |
| return EFI_ST_FAILURE; |
| } |
| string = device_path_to_text->convert_device_path_to_text( |
| dp, true, false); |
| if (!string) { |
| efi_st_error("ConvertDevicePathToText failed\n"); |
| return EFI_ST_FAILURE; |
| } |
| efi_st_printf("%ps\n", string); |
| ret = boottime->free_pool(string); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("FreePool failed\n"); |
| return EFI_ST_FAILURE; |
| } |
| /* |
| * CloseProtocol cannot be called without agent handle. |
| * There is no need to close the device path protocol. |
| */ |
| } |
| ret = boottime->free_pool(handles); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("FreePool failed\n"); |
| return EFI_ST_FAILURE; |
| } |
| |
| /* Test ConvertDevicePathToText */ |
| string = device_path_to_text->convert_device_path_to_text( |
| (struct efi_device_path *)dp2, true, false); |
| if (!string) { |
| efi_st_error("ConvertDevicePathToText failed\n"); |
| return EFI_ST_FAILURE; |
| } |
| if (efi_st_strcmp_16_8( |
| string, |
| "/VenHw(dbca4c98-6cb0-694d-0872-819c650cbbb1)/VenHw(dbca4c98-6cb0-694d-0872-819c650cbba2)") |
| ) { |
| efi_st_printf("dp2: %ps\n", string); |
| efi_st_error("Incorrect text from ConvertDevicePathToText\n"); |
| return EFI_ST_FAILURE; |
| } |
| ret = boottime->free_pool(string); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("FreePool failed\n"); |
| return EFI_ST_FAILURE; |
| } |
| |
| /* Test ConvertDeviceNodeToText */ |
| string = device_path_to_text->convert_device_node_to_text( |
| (struct efi_device_path *)&dp_node, true, false); |
| if (!string) { |
| efi_st_error("ConvertDeviceNodeToText failed\n"); |
| return EFI_ST_FAILURE; |
| } |
| if (efi_st_strcmp_16_8(string, "u-boot")) { |
| efi_st_printf("dp_node: %ps\n", string); |
| efi_st_error( |
| "Incorrect conversion by ConvertDeviceNodeToText\n"); |
| return EFI_ST_FAILURE; |
| } |
| ret = boottime->free_pool(string); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("FreePool failed\n"); |
| return EFI_ST_FAILURE; |
| } |
| |
| /* Test LocateDevicePath */ |
| remaining_dp = (struct efi_device_path *)dp3; |
| ret = boottime->locate_device_path(&guid_protocol, &remaining_dp, |
| &handle); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("LocateDevicePath failed\n"); |
| return EFI_ST_FAILURE; |
| } |
| if (handle != handle2) { |
| efi_st_error("LocateDevicePath returned wrong handle\n"); |
| return EFI_ST_FAILURE; |
| } |
| string = device_path_to_text->convert_device_path_to_text(remaining_dp, |
| true, false); |
| if (!string) { |
| efi_st_error("ConvertDevicePathToText failed\n"); |
| return EFI_ST_FAILURE; |
| } |
| if (efi_st_strcmp_16_8(string, |
| "/VenHw(dbca4c98-6cb0-694d-0872-819c650cbbc3)") |
| ) { |
| efi_st_printf("remaining device path: %ps\n", string); |
| efi_st_error("LocateDevicePath: wrong remaining device path\n"); |
| return EFI_ST_FAILURE; |
| } |
| ret = boottime->free_pool(string); |
| if (ret != EFI_SUCCESS) { |
| efi_st_error("FreePool failed\n"); |
| return EFI_ST_FAILURE; |
| } |
| |
| return EFI_ST_SUCCESS; |
| } |
| |
| EFI_UNIT_TEST(devicepath) = { |
| .name = "device path", |
| .phase = EFI_EXECUTE_BEFORE_BOOTTIME_EXIT, |
| .setup = setup, |
| .execute = execute, |
| .teardown = teardown, |
| }; |