| /* | |
| * Copyright 2004,2007,2008 Freescale Semiconductor, Inc. | |
| * (C) Copyright 2002, 2003 Motorola Inc. | |
| * Xianghua Xiao (X.Xiao@motorola.com) | |
| * | |
| * (C) Copyright 2000 | |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. | |
| * | |
| * See file CREDITS for list of people who contributed to this | |
| * project. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation; either version 2 of | |
| * the License, or (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
| * MA 02111-1307 USA | |
| */ | |
| #include <config.h> | |
| #include <common.h> | |
| #include <asm/io.h> | |
| #include <asm/fsl_dma.h> | |
| /* Controller can only transfer 2^26 - 1 bytes at a time */ | |
| #define FSL_DMA_MAX_SIZE (0x3ffffff) | |
| #if defined(CONFIG_MPC83xx) | |
| #define FSL_DMA_MR_DEFAULT (FSL_DMA_MR_CTM_DIRECT | FSL_DMA_MR_DMSEN) | |
| #else | |
| #define FSL_DMA_MR_DEFAULT (FSL_DMA_MR_BWC_DIS | FSL_DMA_MR_CTM_DIRECT) | |
| #endif | |
| #if defined(CONFIG_MPC83xx) | |
| dma83xx_t *dma_base = (void *)(CONFIG_SYS_MPC83xx_DMA_ADDR); | |
| #elif defined(CONFIG_MPC85xx) | |
| ccsr_dma_t *dma_base = (void *)(CONFIG_SYS_MPC85xx_DMA_ADDR); | |
| #elif defined(CONFIG_MPC86xx) | |
| ccsr_dma_t *dma_base = (void *)(CONFIG_SYS_MPC86xx_DMA_ADDR); | |
| #else | |
| #error "Freescale DMA engine not supported on your processor" | |
| #endif | |
| static void dma_sync(void) | |
| { | |
| #if defined(CONFIG_MPC85xx) | |
| asm("sync; isync; msync"); | |
| #elif defined(CONFIG_MPC86xx) | |
| asm("sync; isync"); | |
| #endif | |
| } | |
| static void out_dma32(volatile unsigned *addr, int val) | |
| { | |
| #if defined(CONFIG_MPC83xx) | |
| out_le32(addr, val); | |
| #else | |
| out_be32(addr, val); | |
| #endif | |
| } | |
| static uint in_dma32(volatile unsigned *addr) | |
| { | |
| #if defined(CONFIG_MPC83xx) | |
| return in_le32(addr); | |
| #else | |
| return in_be32(addr); | |
| #endif | |
| } | |
| static uint dma_check(void) { | |
| volatile fsl_dma_t *dma = &dma_base->dma[0]; | |
| uint status; | |
| /* While the channel is busy, spin */ | |
| do { | |
| status = in_dma32(&dma->sr); | |
| } while (status & FSL_DMA_SR_CB); | |
| /* clear MR[CS] channel start bit */ | |
| out_dma32(&dma->mr, in_dma32(&dma->mr) & ~FSL_DMA_MR_CS); | |
| dma_sync(); | |
| if (status != 0) | |
| printf ("DMA Error: status = %x\n", status); | |
| return status; | |
| } | |
| #if !defined(CONFIG_MPC83xx) | |
| void dma_init(void) { | |
| volatile fsl_dma_t *dma = &dma_base->dma[0]; | |
| out_dma32(&dma->satr, FSL_DMA_SATR_SREAD_SNOOP); | |
| out_dma32(&dma->datr, FSL_DMA_DATR_DWRITE_SNOOP); | |
| out_dma32(&dma->sr, 0xffffffff); /* clear any errors */ | |
| dma_sync(); | |
| } | |
| #endif | |
| int dmacpy(phys_addr_t dest, phys_addr_t src, phys_size_t count) { | |
| volatile fsl_dma_t *dma = &dma_base->dma[0]; | |
| uint xfer_size; | |
| while (count) { | |
| xfer_size = MIN(FSL_DMA_MAX_SIZE, count); | |
| out_dma32(&dma->dar, (u32) (dest & 0xFFFFFFFF)); | |
| out_dma32(&dma->sar, (u32) (src & 0xFFFFFFFF)); | |
| #if !defined(CONFIG_MPC83xx) | |
| out_dma32(&dma->satr, | |
| in_dma32(&dma->satr) | (u32)((u64)src >> 32)); | |
| out_dma32(&dma->datr, | |
| in_dma32(&dma->datr) | (u32)((u64)dest >> 32)); | |
| #endif | |
| out_dma32(&dma->bcr, xfer_size); | |
| dma_sync(); | |
| /* Prepare mode register */ | |
| out_dma32(&dma->mr, FSL_DMA_MR_DEFAULT); | |
| dma_sync(); | |
| /* Start the transfer */ | |
| out_dma32(&dma->mr, FSL_DMA_MR_DEFAULT | FSL_DMA_MR_CS); | |
| count -= xfer_size; | |
| src += xfer_size; | |
| dest += xfer_size; | |
| dma_sync(); | |
| if (dma_check()) | |
| return -1; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * 85xx/86xx use dma to initialize SDRAM when !CONFIG_ECC_INIT_VIA_DDRCONTROLLER | |
| * while 83xx uses dma to initialize SDRAM when CONFIG_DDR_ECC_INIT_VIA_DMA | |
| */ | |
| #if ((!defined CONFIG_MPC83xx && defined(CONFIG_DDR_ECC) && \ | |
| !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)) || \ | |
| (defined(CONFIG_MPC83xx) && defined(CONFIG_DDR_ECC_INIT_VIA_DMA))) | |
| void dma_meminit(uint val, uint size) | |
| { | |
| uint *p = 0; | |
| uint i = 0; | |
| for (*p = 0; p < (uint *)(8 * 1024); p++) { | |
| if (((uint)p & 0x1f) == 0) | |
| ppcDcbz((ulong)p); | |
| *p = (uint)CONFIG_MEM_INIT_VALUE; | |
| if (((uint)p & 0x1c) == 0x1c) | |
| ppcDcbf((ulong)p); | |
| } | |
| dmacpy(0x002000, 0, 0x002000); /* 8K */ | |
| dmacpy(0x004000, 0, 0x004000); /* 16K */ | |
| dmacpy(0x008000, 0, 0x008000); /* 32K */ | |
| dmacpy(0x010000, 0, 0x010000); /* 64K */ | |
| dmacpy(0x020000, 0, 0x020000); /* 128K */ | |
| dmacpy(0x040000, 0, 0x040000); /* 256K */ | |
| dmacpy(0x080000, 0, 0x080000); /* 512K */ | |
| dmacpy(0x100000, 0, 0x100000); /* 1M */ | |
| dmacpy(0x200000, 0, 0x200000); /* 2M */ | |
| dmacpy(0x400000, 0, 0x400000); /* 4M */ | |
| for (i = 1; i < size / 0x800000; i++) | |
| dmacpy((0x800000 * i), 0, 0x800000); | |
| } | |
| #endif |