| /* | |
| * Copyright 2008, Freescale Semiconductor, Inc | |
| * Andy Fleming | |
| * | |
| * Based vaguely on the Linux code | |
| * | |
| * See file CREDITS for list of people who contributed to this | |
| * project. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation; either version 2 of | |
| * the License, or (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
| * MA 02111-1307 USA | |
| */ | |
| #include <config.h> | |
| #include <common.h> | |
| #include <command.h> | |
| #include <mmc.h> | |
| #include <part.h> | |
| #include <malloc.h> | |
| #include <linux/list.h> | |
| #include <div64.h> | |
| /* Set block count limit because of 16 bit register limit on some hardware*/ | |
| #ifndef CONFIG_SYS_MMC_MAX_BLK_COUNT | |
| #define CONFIG_SYS_MMC_MAX_BLK_COUNT 65535 | |
| #endif | |
| static struct list_head mmc_devices; | |
| static int cur_dev_num = -1; | |
| int __board_mmc_getcd(u8 *cd, struct mmc *mmc) { | |
| return -1; | |
| } | |
| int board_mmc_getcd(u8 *cd, struct mmc *mmc)__attribute__((weak, | |
| alias("__board_mmc_getcd"))); | |
| int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) | |
| { | |
| #ifdef CONFIG_MMC_TRACE | |
| int ret; | |
| int i; | |
| u8 *ptr; | |
| printf("CMD_SEND:%d\n", cmd->cmdidx); | |
| printf("\t\tARG\t\t\t 0x%08X\n", cmd->cmdarg); | |
| printf("\t\tFLAG\t\t\t %d\n", cmd->flags); | |
| ret = mmc->send_cmd(mmc, cmd, data); | |
| switch (cmd->resp_type) { | |
| case MMC_RSP_NONE: | |
| printf("\t\tMMC_RSP_NONE\n"); | |
| break; | |
| case MMC_RSP_R1: | |
| printf("\t\tMMC_RSP_R1,5,6,7 \t 0x%08X \n", | |
| cmd->response[0]); | |
| break; | |
| case MMC_RSP_R1b: | |
| printf("\t\tMMC_RSP_R1b\t\t 0x%08X \n", | |
| cmd->response[0]); | |
| break; | |
| case MMC_RSP_R2: | |
| printf("\t\tMMC_RSP_R2\t\t 0x%08X \n", | |
| cmd->response[0]); | |
| printf("\t\t \t\t 0x%08X \n", | |
| cmd->response[1]); | |
| printf("\t\t \t\t 0x%08X \n", | |
| cmd->response[2]); | |
| printf("\t\t \t\t 0x%08X \n", | |
| cmd->response[3]); | |
| printf("\n"); | |
| printf("\t\t\t\t\tDUMPING DATA\n"); | |
| for (i = 0; i < 4; i++) { | |
| int j; | |
| printf("\t\t\t\t\t%03d - ", i*4); | |
| ptr = &cmd->response[i]; | |
| ptr += 3; | |
| for (j = 0; j < 4; j++) | |
| printf("%02X ", *ptr--); | |
| printf("\n"); | |
| } | |
| break; | |
| case MMC_RSP_R3: | |
| printf("\t\tMMC_RSP_R3,4\t\t 0x%08X \n", | |
| cmd->response[0]); | |
| break; | |
| default: | |
| printf("\t\tERROR MMC rsp not supported\n"); | |
| break; | |
| } | |
| return ret; | |
| #else | |
| return mmc->send_cmd(mmc, cmd, data); | |
| #endif | |
| } | |
| int mmc_send_status(struct mmc *mmc, int timeout) | |
| { | |
| struct mmc_cmd cmd; | |
| int err; | |
| #ifdef CONFIG_MMC_TRACE | |
| int status; | |
| #endif | |
| cmd.cmdidx = MMC_CMD_SEND_STATUS; | |
| cmd.resp_type = MMC_RSP_R1; | |
| cmd.cmdarg = 0; | |
| cmd.flags = 0; | |
| do { | |
| err = mmc_send_cmd(mmc, &cmd, NULL); | |
| if (err) | |
| return err; | |
| else if (cmd.response[0] & MMC_STATUS_RDY_FOR_DATA) | |
| break; | |
| udelay(1000); | |
| if (cmd.response[0] & MMC_STATUS_MASK) { | |
| printf("Status Error: 0x%08X\n", cmd.response[0]); | |
| return COMM_ERR; | |
| } | |
| } while (timeout--); | |
| #ifdef CONFIG_MMC_TRACE | |
| status = (cmd.response[0] & MMC_STATUS_CURR_STATE) >> 9; | |
| printf("CURR STATE:%d\n", status); | |
| #endif | |
| if (!timeout) { | |
| printf("Timeout waiting card ready\n"); | |
| return TIMEOUT; | |
| } | |
| return 0; | |
| } | |
| int mmc_set_blocklen(struct mmc *mmc, int len) | |
| { | |
| struct mmc_cmd cmd; | |
| cmd.cmdidx = MMC_CMD_SET_BLOCKLEN; | |
| cmd.resp_type = MMC_RSP_R1; | |
| cmd.cmdarg = len; | |
| cmd.flags = 0; | |
| return mmc_send_cmd(mmc, &cmd, NULL); | |
| } | |
| struct mmc *find_mmc_device(int dev_num) | |
| { | |
| struct mmc *m; | |
| struct list_head *entry; | |
| list_for_each(entry, &mmc_devices) { | |
| m = list_entry(entry, struct mmc, link); | |
| if (m->block_dev.dev == dev_num) | |
| return m; | |
| } | |
| printf("MMC Device %d not found\n", dev_num); | |
| return NULL; | |
| } | |
| static ulong mmc_erase_t(struct mmc *mmc, ulong start, lbaint_t blkcnt) | |
| { | |
| struct mmc_cmd cmd; | |
| ulong end; | |
| int err, start_cmd, end_cmd; | |
| if (mmc->high_capacity) | |
| end = start + blkcnt - 1; | |
| else { | |
| end = (start + blkcnt - 1) * mmc->write_bl_len; | |
| start *= mmc->write_bl_len; | |
| } | |
| if (IS_SD(mmc)) { | |
| start_cmd = SD_CMD_ERASE_WR_BLK_START; | |
| end_cmd = SD_CMD_ERASE_WR_BLK_END; | |
| } else { | |
| start_cmd = MMC_CMD_ERASE_GROUP_START; | |
| end_cmd = MMC_CMD_ERASE_GROUP_END; | |
| } | |
| cmd.cmdidx = start_cmd; | |
| cmd.cmdarg = start; | |
| cmd.resp_type = MMC_RSP_R1; | |
| cmd.flags = 0; | |
| err = mmc_send_cmd(mmc, &cmd, NULL); | |
| if (err) | |
| goto err_out; | |
| cmd.cmdidx = end_cmd; | |
| cmd.cmdarg = end; | |
| err = mmc_send_cmd(mmc, &cmd, NULL); | |
| if (err) | |
| goto err_out; | |
| cmd.cmdidx = MMC_CMD_ERASE; | |
| cmd.cmdarg = SECURE_ERASE; | |
| cmd.resp_type = MMC_RSP_R1b; | |
| err = mmc_send_cmd(mmc, &cmd, NULL); | |
| if (err) | |
| goto err_out; | |
| return 0; | |
| err_out: | |
| puts("mmc erase failed\n"); | |
| return err; | |
| } | |
| static unsigned long | |
| mmc_berase(int dev_num, unsigned long start, lbaint_t blkcnt) | |
| { | |
| int err = 0; | |
| struct mmc *mmc = find_mmc_device(dev_num); | |
| lbaint_t blk = 0, blk_r = 0; | |
| if (!mmc) | |
| return -1; | |
| if ((start % mmc->erase_grp_size) || (blkcnt % mmc->erase_grp_size)) | |
| printf("\n\nCaution! Your devices Erase group is 0x%x\n" | |
| "The erase range would be change to 0x%lx~0x%lx\n\n", | |
| mmc->erase_grp_size, start & ~(mmc->erase_grp_size - 1), | |
| ((start + blkcnt + mmc->erase_grp_size) | |
| & ~(mmc->erase_grp_size - 1)) - 1); | |
| while (blk < blkcnt) { | |
| blk_r = ((blkcnt - blk) > mmc->erase_grp_size) ? | |
| mmc->erase_grp_size : (blkcnt - blk); | |
| err = mmc_erase_t(mmc, start + blk, blk_r); | |
| if (err) | |
| break; | |
| blk += blk_r; | |
| } | |
| return blk; | |
| } | |
| static ulong | |
| mmc_write_blocks(struct mmc *mmc, ulong start, lbaint_t blkcnt, const void*src) | |
| { | |
| struct mmc_cmd cmd; | |
| struct mmc_data data; | |
| int timeout = 1000; | |
| if ((start + blkcnt) > mmc->block_dev.lba) { | |
| printf("MMC: block number 0x%lx exceeds max(0x%lx)\n", | |
| start + blkcnt, mmc->block_dev.lba); | |
| return 0; | |
| } | |
| if (blkcnt > 1) | |
| cmd.cmdidx = MMC_CMD_WRITE_MULTIPLE_BLOCK; | |
| else | |
| cmd.cmdidx = MMC_CMD_WRITE_SINGLE_BLOCK; | |
| if (mmc->high_capacity) | |
| cmd.cmdarg = start; | |
| else | |
| cmd.cmdarg = start * mmc->write_bl_len; | |
| cmd.resp_type = MMC_RSP_R1; | |
| cmd.flags = 0; | |
| data.src = src; | |
| data.blocks = blkcnt; | |
| data.blocksize = mmc->write_bl_len; | |
| data.flags = MMC_DATA_WRITE; | |
| if (mmc_send_cmd(mmc, &cmd, &data)) { | |
| printf("mmc write failed\n"); | |
| return 0; | |
| } | |
| /* SPI multiblock writes terminate using a special | |
| * token, not a STOP_TRANSMISSION request. | |
| */ | |
| if (!mmc_host_is_spi(mmc) && blkcnt > 1) { | |
| cmd.cmdidx = MMC_CMD_STOP_TRANSMISSION; | |
| cmd.cmdarg = 0; | |
| cmd.resp_type = MMC_RSP_R1b; | |
| cmd.flags = 0; | |
| if (mmc_send_cmd(mmc, &cmd, NULL)) { | |
| printf("mmc fail to send stop cmd\n"); | |
| return 0; | |
| } | |
| /* Waiting for the ready status */ | |
| mmc_send_status(mmc, timeout); | |
| } | |
| return blkcnt; | |
| } | |
| static ulong | |
| mmc_bwrite(int dev_num, ulong start, lbaint_t blkcnt, const void*src) | |
| { | |
| lbaint_t cur, blocks_todo = blkcnt; | |
| struct mmc *mmc = find_mmc_device(dev_num); | |
| if (!mmc) | |
| return 0; | |
| if (mmc_set_blocklen(mmc, mmc->write_bl_len)) | |
| return 0; | |
| do { | |
| cur = (blocks_todo > mmc->b_max) ? mmc->b_max : blocks_todo; | |
| if(mmc_write_blocks(mmc, start, cur, src) != cur) | |
| return 0; | |
| blocks_todo -= cur; | |
| start += cur; | |
| src += cur * mmc->write_bl_len; | |
| } while (blocks_todo > 0); | |
| return blkcnt; | |
| } | |
| int mmc_read_blocks(struct mmc *mmc, void *dst, ulong start, lbaint_t blkcnt) | |
| { | |
| struct mmc_cmd cmd; | |
| struct mmc_data data; | |
| int timeout = 1000; | |
| if (blkcnt > 1) | |
| cmd.cmdidx = MMC_CMD_READ_MULTIPLE_BLOCK; | |
| else | |
| cmd.cmdidx = MMC_CMD_READ_SINGLE_BLOCK; | |
| if (mmc->high_capacity) | |
| cmd.cmdarg = start; | |
| else | |
| cmd.cmdarg = start * mmc->read_bl_len; | |
| cmd.resp_type = MMC_RSP_R1; | |
| cmd.flags = 0; | |
| data.dest = dst; | |
| data.blocks = blkcnt; | |
| data.blocksize = mmc->read_bl_len; | |
| data.flags = MMC_DATA_READ; | |
| if (mmc_send_cmd(mmc, &cmd, &data)) | |
| return 0; | |
| if (blkcnt > 1) { | |
| cmd.cmdidx = MMC_CMD_STOP_TRANSMISSION; | |
| cmd.cmdarg = 0; | |
| cmd.resp_type = MMC_RSP_R1b; | |
| cmd.flags = 0; | |
| if (mmc_send_cmd(mmc, &cmd, NULL)) { | |
| printf("mmc fail to send stop cmd\n"); | |
| return 0; | |
| } | |
| /* Waiting for the ready status */ | |
| mmc_send_status(mmc, timeout); | |
| } | |
| return blkcnt; | |
| } | |
| static ulong mmc_bread(int dev_num, ulong start, lbaint_t blkcnt, void *dst) | |
| { | |
| lbaint_t cur, blocks_todo = blkcnt; | |
| if (blkcnt == 0) | |
| return 0; | |
| struct mmc *mmc = find_mmc_device(dev_num); | |
| if (!mmc) | |
| return 0; | |
| if ((start + blkcnt) > mmc->block_dev.lba) { | |
| printf("MMC: block number 0x%lx exceeds max(0x%lx)\n", | |
| start + blkcnt, mmc->block_dev.lba); | |
| return 0; | |
| } | |
| if (mmc_set_blocklen(mmc, mmc->read_bl_len)) | |
| return 0; | |
| do { | |
| cur = (blocks_todo > mmc->b_max) ? mmc->b_max : blocks_todo; | |
| if(mmc_read_blocks(mmc, dst, start, cur) != cur) | |
| return 0; | |
| blocks_todo -= cur; | |
| start += cur; | |
| dst += cur * mmc->read_bl_len; | |
| } while (blocks_todo > 0); | |
| return blkcnt; | |
| } | |
| int mmc_go_idle(struct mmc* mmc) | |
| { | |
| struct mmc_cmd cmd; | |
| int err; | |
| udelay(1000); | |
| cmd.cmdidx = MMC_CMD_GO_IDLE_STATE; | |
| cmd.cmdarg = 0; | |
| cmd.resp_type = MMC_RSP_NONE; | |
| cmd.flags = 0; | |
| err = mmc_send_cmd(mmc, &cmd, NULL); | |
| if (err) | |
| return err; | |
| udelay(2000); | |
| return 0; | |
| } | |
| int | |
| sd_send_op_cond(struct mmc *mmc) | |
| { | |
| int timeout = 1000; | |
| int err; | |
| struct mmc_cmd cmd; | |
| do { | |
| cmd.cmdidx = MMC_CMD_APP_CMD; | |
| cmd.resp_type = MMC_RSP_R1; | |
| cmd.cmdarg = 0; | |
| cmd.flags = 0; | |
| err = mmc_send_cmd(mmc, &cmd, NULL); | |
| if (err) | |
| return err; | |
| cmd.cmdidx = SD_CMD_APP_SEND_OP_COND; | |
| cmd.resp_type = MMC_RSP_R3; | |
| /* | |
| * Most cards do not answer if some reserved bits | |
| * in the ocr are set. However, Some controller | |
| * can set bit 7 (reserved for low voltages), but | |
| * how to manage low voltages SD card is not yet | |
| * specified. | |
| */ | |
| cmd.cmdarg = mmc_host_is_spi(mmc) ? 0 : | |
| (mmc->voltages & 0xff8000); | |
| if (mmc->version == SD_VERSION_2) | |
| cmd.cmdarg |= OCR_HCS; | |
| err = mmc_send_cmd(mmc, &cmd, NULL); | |
| if (err) | |
| return err; | |
| udelay(1000); | |
| } while ((!(cmd.response[0] & OCR_BUSY)) && timeout--); | |
| if (timeout <= 0) | |
| return UNUSABLE_ERR; | |
| if (mmc->version != SD_VERSION_2) | |
| mmc->version = SD_VERSION_1_0; | |
| if (mmc_host_is_spi(mmc)) { /* read OCR for spi */ | |
| cmd.cmdidx = MMC_CMD_SPI_READ_OCR; | |
| cmd.resp_type = MMC_RSP_R3; | |
| cmd.cmdarg = 0; | |
| cmd.flags = 0; | |
| err = mmc_send_cmd(mmc, &cmd, NULL); | |
| if (err) | |
| return err; | |
| } | |
| mmc->ocr = cmd.response[0]; | |
| mmc->high_capacity = ((mmc->ocr & OCR_HCS) == OCR_HCS); | |
| mmc->rca = 0; | |
| return 0; | |
| } | |
| int mmc_send_op_cond(struct mmc *mmc) | |
| { | |
| int timeout = 10000; | |
| struct mmc_cmd cmd; | |
| int err; | |
| /* Some cards seem to need this */ | |
| mmc_go_idle(mmc); | |
| /* Asking to the card its capabilities */ | |
| cmd.cmdidx = MMC_CMD_SEND_OP_COND; | |
| cmd.resp_type = MMC_RSP_R3; | |
| cmd.cmdarg = 0; | |
| cmd.flags = 0; | |
| err = mmc_send_cmd(mmc, &cmd, NULL); | |
| if (err) | |
| return err; | |
| udelay(1000); | |
| do { | |
| cmd.cmdidx = MMC_CMD_SEND_OP_COND; | |
| cmd.resp_type = MMC_RSP_R3; | |
| cmd.cmdarg = (mmc_host_is_spi(mmc) ? 0 : | |
| (mmc->voltages & | |
| (cmd.response[0] & OCR_VOLTAGE_MASK)) | | |
| (cmd.response[0] & OCR_ACCESS_MODE)); | |
| if (mmc->host_caps & MMC_MODE_HC) | |
| cmd.cmdarg |= OCR_HCS; | |
| cmd.flags = 0; | |
| err = mmc_send_cmd(mmc, &cmd, NULL); | |
| if (err) | |
| return err; | |
| udelay(1000); | |
| } while (!(cmd.response[0] & OCR_BUSY) && timeout--); | |
| if (timeout <= 0) | |
| return UNUSABLE_ERR; | |
| if (mmc_host_is_spi(mmc)) { /* read OCR for spi */ | |
| cmd.cmdidx = MMC_CMD_SPI_READ_OCR; | |
| cmd.resp_type = MMC_RSP_R3; | |
| cmd.cmdarg = 0; | |
| cmd.flags = 0; | |
| err = mmc_send_cmd(mmc, &cmd, NULL); | |
| if (err) | |
| return err; | |
| } | |
| mmc->version = MMC_VERSION_UNKNOWN; | |
| mmc->ocr = cmd.response[0]; | |
| mmc->high_capacity = ((mmc->ocr & OCR_HCS) == OCR_HCS); | |
| mmc->rca = 0; | |
| return 0; | |
| } | |
| int mmc_send_ext_csd(struct mmc *mmc, char *ext_csd) | |
| { | |
| struct mmc_cmd cmd; | |
| struct mmc_data data; | |
| int err; | |
| /* Get the Card Status Register */ | |
| cmd.cmdidx = MMC_CMD_SEND_EXT_CSD; | |
| cmd.resp_type = MMC_RSP_R1; | |
| cmd.cmdarg = 0; | |
| cmd.flags = 0; | |
| data.dest = ext_csd; | |
| data.blocks = 1; | |
| data.blocksize = 512; | |
| data.flags = MMC_DATA_READ; | |
| err = mmc_send_cmd(mmc, &cmd, &data); | |
| return err; | |
| } | |
| int mmc_switch(struct mmc *mmc, u8 set, u8 index, u8 value) | |
| { | |
| struct mmc_cmd cmd; | |
| int timeout = 1000; | |
| int ret; | |
| cmd.cmdidx = MMC_CMD_SWITCH; | |
| cmd.resp_type = MMC_RSP_R1b; | |
| cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) | | |
| (index << 16) | | |
| (value << 8); | |
| cmd.flags = 0; | |
| ret = mmc_send_cmd(mmc, &cmd, NULL); | |
| /* Waiting for the ready status */ | |
| mmc_send_status(mmc, timeout); | |
| return ret; | |
| } | |
| int mmc_change_freq(struct mmc *mmc) | |
| { | |
| char ext_csd[512]; | |
| char cardtype; | |
| int err; | |
| mmc->card_caps = 0; | |
| if (mmc_host_is_spi(mmc)) | |
| return 0; | |
| /* Only version 4 supports high-speed */ | |
| if (mmc->version < MMC_VERSION_4) | |
| return 0; | |
| mmc->card_caps |= MMC_MODE_4BIT; | |
| err = mmc_send_ext_csd(mmc, ext_csd); | |
| if (err) | |
| return err; | |
| cardtype = ext_csd[196] & 0xf; | |
| err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_HS_TIMING, 1); | |
| if (err) | |
| return err; | |
| /* Now check to see that it worked */ | |
| err = mmc_send_ext_csd(mmc, ext_csd); | |
| if (err) | |
| return err; | |
| /* No high-speed support */ | |
| if (!ext_csd[185]) | |
| return 0; | |
| /* High Speed is set, there are two types: 52MHz and 26MHz */ | |
| if (cardtype & MMC_HS_52MHZ) | |
| mmc->card_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS; | |
| else | |
| mmc->card_caps |= MMC_MODE_HS; | |
| return 0; | |
| } | |
| int mmc_switch_part(int dev_num, unsigned int part_num) | |
| { | |
| struct mmc *mmc = find_mmc_device(dev_num); | |
| if (!mmc) | |
| return -1; | |
| return mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_PART_CONF, | |
| (mmc->part_config & ~PART_ACCESS_MASK) | |
| | (part_num & PART_ACCESS_MASK)); | |
| } | |
| int sd_switch(struct mmc *mmc, int mode, int group, u8 value, u8 *resp) | |
| { | |
| struct mmc_cmd cmd; | |
| struct mmc_data data; | |
| /* Switch the frequency */ | |
| cmd.cmdidx = SD_CMD_SWITCH_FUNC; | |
| cmd.resp_type = MMC_RSP_R1; | |
| cmd.cmdarg = (mode << 31) | 0xffffff; | |
| cmd.cmdarg &= ~(0xf << (group * 4)); | |
| cmd.cmdarg |= value << (group * 4); | |
| cmd.flags = 0; | |
| data.dest = (char *)resp; | |
| data.blocksize = 64; | |
| data.blocks = 1; | |
| data.flags = MMC_DATA_READ; | |
| return mmc_send_cmd(mmc, &cmd, &data); | |
| } | |
| int sd_change_freq(struct mmc *mmc) | |
| { | |
| int err; | |
| struct mmc_cmd cmd; | |
| uint scr[2]; | |
| uint switch_status[16]; | |
| struct mmc_data data; | |
| int timeout; | |
| mmc->card_caps = 0; | |
| if (mmc_host_is_spi(mmc)) | |
| return 0; | |
| /* Read the SCR to find out if this card supports higher speeds */ | |
| cmd.cmdidx = MMC_CMD_APP_CMD; | |
| cmd.resp_type = MMC_RSP_R1; | |
| cmd.cmdarg = mmc->rca << 16; | |
| cmd.flags = 0; | |
| err = mmc_send_cmd(mmc, &cmd, NULL); | |
| if (err) | |
| return err; | |
| cmd.cmdidx = SD_CMD_APP_SEND_SCR; | |
| cmd.resp_type = MMC_RSP_R1; | |
| cmd.cmdarg = 0; | |
| cmd.flags = 0; | |
| timeout = 3; | |
| retry_scr: | |
| data.dest = (char *)&scr; | |
| data.blocksize = 8; | |
| data.blocks = 1; | |
| data.flags = MMC_DATA_READ; | |
| err = mmc_send_cmd(mmc, &cmd, &data); | |
| if (err) { | |
| if (timeout--) | |
| goto retry_scr; | |
| return err; | |
| } | |
| mmc->scr[0] = __be32_to_cpu(scr[0]); | |
| mmc->scr[1] = __be32_to_cpu(scr[1]); | |
| switch ((mmc->scr[0] >> 24) & 0xf) { | |
| case 0: | |
| mmc->version = SD_VERSION_1_0; | |
| break; | |
| case 1: | |
| mmc->version = SD_VERSION_1_10; | |
| break; | |
| case 2: | |
| mmc->version = SD_VERSION_2; | |
| break; | |
| default: | |
| mmc->version = SD_VERSION_1_0; | |
| break; | |
| } | |
| if (mmc->scr[0] & SD_DATA_4BIT) | |
| mmc->card_caps |= MMC_MODE_4BIT; | |
| /* Version 1.0 doesn't support switching */ | |
| if (mmc->version == SD_VERSION_1_0) | |
| return 0; | |
| timeout = 4; | |
| while (timeout--) { | |
| err = sd_switch(mmc, SD_SWITCH_CHECK, 0, 1, | |
| (u8 *)&switch_status); | |
| if (err) | |
| return err; | |
| /* The high-speed function is busy. Try again */ | |
| if (!(__be32_to_cpu(switch_status[7]) & SD_HIGHSPEED_BUSY)) | |
| break; | |
| } | |
| /* If high-speed isn't supported, we return */ | |
| if (!(__be32_to_cpu(switch_status[3]) & SD_HIGHSPEED_SUPPORTED)) | |
| return 0; | |
| err = sd_switch(mmc, SD_SWITCH_SWITCH, 0, 1, (u8 *)&switch_status); | |
| if (err) | |
| return err; | |
| if ((__be32_to_cpu(switch_status[4]) & 0x0f000000) == 0x01000000) | |
| mmc->card_caps |= MMC_MODE_HS; | |
| return 0; | |
| } | |
| /* frequency bases */ | |
| /* divided by 10 to be nice to platforms without floating point */ | |
| static const int fbase[] = { | |
| 10000, | |
| 100000, | |
| 1000000, | |
| 10000000, | |
| }; | |
| /* Multiplier values for TRAN_SPEED. Multiplied by 10 to be nice | |
| * to platforms without floating point. | |
| */ | |
| static const int multipliers[] = { | |
| 0, /* reserved */ | |
| 10, | |
| 12, | |
| 13, | |
| 15, | |
| 20, | |
| 25, | |
| 30, | |
| 35, | |
| 40, | |
| 45, | |
| 50, | |
| 55, | |
| 60, | |
| 70, | |
| 80, | |
| }; | |
| void mmc_set_ios(struct mmc *mmc) | |
| { | |
| mmc->set_ios(mmc); | |
| } | |
| void mmc_set_clock(struct mmc *mmc, uint clock) | |
| { | |
| if (clock > mmc->f_max) | |
| clock = mmc->f_max; | |
| if (clock < mmc->f_min) | |
| clock = mmc->f_min; | |
| mmc->clock = clock; | |
| mmc_set_ios(mmc); | |
| } | |
| void mmc_set_bus_width(struct mmc *mmc, uint width) | |
| { | |
| mmc->bus_width = width; | |
| mmc_set_ios(mmc); | |
| } | |
| int mmc_startup(struct mmc *mmc) | |
| { | |
| int err; | |
| uint mult, freq; | |
| u64 cmult, csize, capacity; | |
| struct mmc_cmd cmd; | |
| char ext_csd[512]; | |
| int timeout = 1000; | |
| #ifdef CONFIG_MMC_SPI_CRC_ON | |
| if (mmc_host_is_spi(mmc)) { /* enable CRC check for spi */ | |
| cmd.cmdidx = MMC_CMD_SPI_CRC_ON_OFF; | |
| cmd.resp_type = MMC_RSP_R1; | |
| cmd.cmdarg = 1; | |
| cmd.flags = 0; | |
| err = mmc_send_cmd(mmc, &cmd, NULL); | |
| if (err) | |
| return err; | |
| } | |
| #endif | |
| /* Put the Card in Identify Mode */ | |
| cmd.cmdidx = mmc_host_is_spi(mmc) ? MMC_CMD_SEND_CID : | |
| MMC_CMD_ALL_SEND_CID; /* cmd not supported in spi */ | |
| cmd.resp_type = MMC_RSP_R2; | |
| cmd.cmdarg = 0; | |
| cmd.flags = 0; | |
| err = mmc_send_cmd(mmc, &cmd, NULL); | |
| if (err) | |
| return err; | |
| memcpy(mmc->cid, cmd.response, 16); | |
| /* | |
| * For MMC cards, set the Relative Address. | |
| * For SD cards, get the Relatvie Address. | |
| * This also puts the cards into Standby State | |
| */ | |
| if (!mmc_host_is_spi(mmc)) { /* cmd not supported in spi */ | |
| cmd.cmdidx = SD_CMD_SEND_RELATIVE_ADDR; | |
| cmd.cmdarg = mmc->rca << 16; | |
| cmd.resp_type = MMC_RSP_R6; | |
| cmd.flags = 0; | |
| err = mmc_send_cmd(mmc, &cmd, NULL); | |
| if (err) | |
| return err; | |
| if (IS_SD(mmc)) | |
| mmc->rca = (cmd.response[0] >> 16) & 0xffff; | |
| } | |
| /* Get the Card-Specific Data */ | |
| cmd.cmdidx = MMC_CMD_SEND_CSD; | |
| cmd.resp_type = MMC_RSP_R2; | |
| cmd.cmdarg = mmc->rca << 16; | |
| cmd.flags = 0; | |
| err = mmc_send_cmd(mmc, &cmd, NULL); | |
| /* Waiting for the ready status */ | |
| mmc_send_status(mmc, timeout); | |
| if (err) | |
| return err; | |
| mmc->csd[0] = cmd.response[0]; | |
| mmc->csd[1] = cmd.response[1]; | |
| mmc->csd[2] = cmd.response[2]; | |
| mmc->csd[3] = cmd.response[3]; | |
| if (mmc->version == MMC_VERSION_UNKNOWN) { | |
| int version = (cmd.response[0] >> 26) & 0xf; | |
| switch (version) { | |
| case 0: | |
| mmc->version = MMC_VERSION_1_2; | |
| break; | |
| case 1: | |
| mmc->version = MMC_VERSION_1_4; | |
| break; | |
| case 2: | |
| mmc->version = MMC_VERSION_2_2; | |
| break; | |
| case 3: | |
| mmc->version = MMC_VERSION_3; | |
| break; | |
| case 4: | |
| mmc->version = MMC_VERSION_4; | |
| break; | |
| default: | |
| mmc->version = MMC_VERSION_1_2; | |
| break; | |
| } | |
| } | |
| /* divide frequency by 10, since the mults are 10x bigger */ | |
| freq = fbase[(cmd.response[0] & 0x7)]; | |
| mult = multipliers[((cmd.response[0] >> 3) & 0xf)]; | |
| mmc->tran_speed = freq * mult; | |
| mmc->read_bl_len = 1 << ((cmd.response[1] >> 16) & 0xf); | |
| if (IS_SD(mmc)) | |
| mmc->write_bl_len = mmc->read_bl_len; | |
| else | |
| mmc->write_bl_len = 1 << ((cmd.response[3] >> 22) & 0xf); | |
| if (mmc->high_capacity) { | |
| csize = (mmc->csd[1] & 0x3f) << 16 | |
| | (mmc->csd[2] & 0xffff0000) >> 16; | |
| cmult = 8; | |
| } else { | |
| csize = (mmc->csd[1] & 0x3ff) << 2 | |
| | (mmc->csd[2] & 0xc0000000) >> 30; | |
| cmult = (mmc->csd[2] & 0x00038000) >> 15; | |
| } | |
| mmc->capacity = (csize + 1) << (cmult + 2); | |
| mmc->capacity *= mmc->read_bl_len; | |
| if (mmc->read_bl_len > 512) | |
| mmc->read_bl_len = 512; | |
| if (mmc->write_bl_len > 512) | |
| mmc->write_bl_len = 512; | |
| /* Select the card, and put it into Transfer Mode */ | |
| if (!mmc_host_is_spi(mmc)) { /* cmd not supported in spi */ | |
| cmd.cmdidx = MMC_CMD_SELECT_CARD; | |
| cmd.resp_type = MMC_RSP_R1b; | |
| cmd.cmdarg = mmc->rca << 16; | |
| cmd.flags = 0; | |
| err = mmc_send_cmd(mmc, &cmd, NULL); | |
| if (err) | |
| return err; | |
| } | |
| /* | |
| * For SD, its erase group is always one sector | |
| */ | |
| mmc->erase_grp_size = 1; | |
| mmc->part_config = MMCPART_NOAVAILABLE; | |
| if (!IS_SD(mmc) && (mmc->version >= MMC_VERSION_4)) { | |
| /* check ext_csd version and capacity */ | |
| err = mmc_send_ext_csd(mmc, ext_csd); | |
| if (!err & (ext_csd[192] >= 2)) { | |
| /* | |
| * According to the JEDEC Standard, the value of | |
| * ext_csd's capacity is valid if the value is more | |
| * than 2GB | |
| */ | |
| capacity = ext_csd[212] << 0 | ext_csd[213] << 8 | | |
| ext_csd[214] << 16 | ext_csd[215] << 24; | |
| capacity *= 512; | |
| if ((capacity >> 20) > 2 * 1024) | |
| mmc->capacity = capacity; | |
| } | |
| /* | |
| * Check whether GROUP_DEF is set, if yes, read out | |
| * group size from ext_csd directly, or calculate | |
| * the group size from the csd value. | |
| */ | |
| if (ext_csd[175]) | |
| mmc->erase_grp_size = ext_csd[224] * 512 * 1024; | |
| else { | |
| int erase_gsz, erase_gmul; | |
| erase_gsz = (mmc->csd[2] & 0x00007c00) >> 10; | |
| erase_gmul = (mmc->csd[2] & 0x000003e0) >> 5; | |
| mmc->erase_grp_size = (erase_gsz + 1) | |
| * (erase_gmul + 1); | |
| } | |
| /* store the partition info of emmc */ | |
| if (ext_csd[160] & PART_SUPPORT) | |
| mmc->part_config = ext_csd[179]; | |
| } | |
| if (IS_SD(mmc)) | |
| err = sd_change_freq(mmc); | |
| else | |
| err = mmc_change_freq(mmc); | |
| if (err) | |
| return err; | |
| /* Restrict card's capabilities by what the host can do */ | |
| mmc->card_caps &= mmc->host_caps; | |
| if (IS_SD(mmc)) { | |
| if (mmc->card_caps & MMC_MODE_4BIT) { | |
| cmd.cmdidx = MMC_CMD_APP_CMD; | |
| cmd.resp_type = MMC_RSP_R1; | |
| cmd.cmdarg = mmc->rca << 16; | |
| cmd.flags = 0; | |
| err = mmc_send_cmd(mmc, &cmd, NULL); | |
| if (err) | |
| return err; | |
| cmd.cmdidx = SD_CMD_APP_SET_BUS_WIDTH; | |
| cmd.resp_type = MMC_RSP_R1; | |
| cmd.cmdarg = 2; | |
| cmd.flags = 0; | |
| err = mmc_send_cmd(mmc, &cmd, NULL); | |
| if (err) | |
| return err; | |
| mmc_set_bus_width(mmc, 4); | |
| } | |
| if (mmc->card_caps & MMC_MODE_HS) | |
| mmc_set_clock(mmc, 50000000); | |
| else | |
| mmc_set_clock(mmc, 25000000); | |
| } else { | |
| if (mmc->card_caps & MMC_MODE_4BIT) { | |
| /* Set the card to use 4 bit*/ | |
| err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, | |
| EXT_CSD_BUS_WIDTH, | |
| EXT_CSD_BUS_WIDTH_4); | |
| if (err) | |
| return err; | |
| mmc_set_bus_width(mmc, 4); | |
| } else if (mmc->card_caps & MMC_MODE_8BIT) { | |
| /* Set the card to use 8 bit*/ | |
| err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, | |
| EXT_CSD_BUS_WIDTH, | |
| EXT_CSD_BUS_WIDTH_8); | |
| if (err) | |
| return err; | |
| mmc_set_bus_width(mmc, 8); | |
| } | |
| if (mmc->card_caps & MMC_MODE_HS) { | |
| if (mmc->card_caps & MMC_MODE_HS_52MHz) | |
| mmc_set_clock(mmc, 52000000); | |
| else | |
| mmc_set_clock(mmc, 26000000); | |
| } else | |
| mmc_set_clock(mmc, 20000000); | |
| } | |
| /* fill in device description */ | |
| mmc->block_dev.lun = 0; | |
| mmc->block_dev.type = 0; | |
| mmc->block_dev.blksz = mmc->read_bl_len; | |
| mmc->block_dev.lba = lldiv(mmc->capacity, mmc->read_bl_len); | |
| sprintf(mmc->block_dev.vendor, "Man %06x Snr %08x", mmc->cid[0] >> 8, | |
| (mmc->cid[2] << 8) | (mmc->cid[3] >> 24)); | |
| sprintf(mmc->block_dev.product, "%c%c%c%c%c", mmc->cid[0] & 0xff, | |
| (mmc->cid[1] >> 24), (mmc->cid[1] >> 16) & 0xff, | |
| (mmc->cid[1] >> 8) & 0xff, mmc->cid[1] & 0xff); | |
| sprintf(mmc->block_dev.revision, "%d.%d", mmc->cid[2] >> 28, | |
| (mmc->cid[2] >> 24) & 0xf); | |
| init_part(&mmc->block_dev); | |
| return 0; | |
| } | |
| int mmc_send_if_cond(struct mmc *mmc) | |
| { | |
| struct mmc_cmd cmd; | |
| int err; | |
| cmd.cmdidx = SD_CMD_SEND_IF_COND; | |
| /* We set the bit if the host supports voltages between 2.7 and 3.6 V */ | |
| cmd.cmdarg = ((mmc->voltages & 0xff8000) != 0) << 8 | 0xaa; | |
| cmd.resp_type = MMC_RSP_R7; | |
| cmd.flags = 0; | |
| err = mmc_send_cmd(mmc, &cmd, NULL); | |
| if (err) | |
| return err; | |
| if ((cmd.response[0] & 0xff) != 0xaa) | |
| return UNUSABLE_ERR; | |
| else | |
| mmc->version = SD_VERSION_2; | |
| return 0; | |
| } | |
| int mmc_register(struct mmc *mmc) | |
| { | |
| /* Setup the universal parts of the block interface just once */ | |
| mmc->block_dev.if_type = IF_TYPE_MMC; | |
| mmc->block_dev.dev = cur_dev_num++; | |
| mmc->block_dev.removable = 1; | |
| mmc->block_dev.block_read = mmc_bread; | |
| mmc->block_dev.block_write = mmc_bwrite; | |
| mmc->block_dev.block_erase = mmc_berase; | |
| if (!mmc->b_max) | |
| mmc->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT; | |
| INIT_LIST_HEAD (&mmc->link); | |
| list_add_tail (&mmc->link, &mmc_devices); | |
| return 0; | |
| } | |
| #ifdef CONFIG_PARTITIONS | |
| block_dev_desc_t *mmc_get_dev(int dev) | |
| { | |
| struct mmc *mmc = find_mmc_device(dev); | |
| return mmc ? &mmc->block_dev : NULL; | |
| } | |
| #endif | |
| int mmc_init(struct mmc *mmc) | |
| { | |
| int err; | |
| if (mmc->has_init) | |
| return 0; | |
| err = mmc->init(mmc); | |
| if (err) | |
| return err; | |
| mmc_set_bus_width(mmc, 1); | |
| mmc_set_clock(mmc, 1); | |
| /* Reset the Card */ | |
| err = mmc_go_idle(mmc); | |
| if (err) | |
| return err; | |
| /* The internal partition reset to user partition(0) at every CMD0*/ | |
| mmc->part_num = 0; | |
| /* Test for SD version 2 */ | |
| err = mmc_send_if_cond(mmc); | |
| /* Now try to get the SD card's operating condition */ | |
| err = sd_send_op_cond(mmc); | |
| /* If the command timed out, we check for an MMC card */ | |
| if (err == TIMEOUT) { | |
| err = mmc_send_op_cond(mmc); | |
| if (err) { | |
| printf("Card did not respond to voltage select!\n"); | |
| return UNUSABLE_ERR; | |
| } | |
| } | |
| err = mmc_startup(mmc); | |
| if (err) | |
| mmc->has_init = 0; | |
| else | |
| mmc->has_init = 1; | |
| return err; | |
| } | |
| /* | |
| * CPU and board-specific MMC initializations. Aliased function | |
| * signals caller to move on | |
| */ | |
| static int __def_mmc_init(bd_t *bis) | |
| { | |
| return -1; | |
| } | |
| int cpu_mmc_init(bd_t *bis) __attribute__((weak, alias("__def_mmc_init"))); | |
| int board_mmc_init(bd_t *bis) __attribute__((weak, alias("__def_mmc_init"))); | |
| void print_mmc_devices(char separator) | |
| { | |
| struct mmc *m; | |
| struct list_head *entry; | |
| list_for_each(entry, &mmc_devices) { | |
| m = list_entry(entry, struct mmc, link); | |
| printf("%s: %d", m->name, m->block_dev.dev); | |
| if (entry->next != &mmc_devices) | |
| printf("%c ", separator); | |
| } | |
| printf("\n"); | |
| } | |
| int get_mmc_num(void) | |
| { | |
| return cur_dev_num; | |
| } | |
| int mmc_initialize(bd_t *bis) | |
| { | |
| INIT_LIST_HEAD (&mmc_devices); | |
| cur_dev_num = 0; | |
| if (board_mmc_init(bis) < 0) | |
| cpu_mmc_init(bis); | |
| print_mmc_devices(','); | |
| return 0; | |
| } |