|  | /* | 
|  | * (C) Copyright 2006 | 
|  | * Heiko Schocher, hs@denx.de | 
|  | * Based on ACE1XK.c | 
|  | * | 
|  | * See file CREDITS for list of people who contributed to this | 
|  | * project. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License as | 
|  | * published by the Free Software Foundation; either version 2 of | 
|  | * the License, or (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | 
|  | * MA 02111-1307 USA | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <common.h>		/* core U-Boot definitions */ | 
|  | #include <altera.h> | 
|  | #include <ACEX1K.h>		/* ACEX device family */ | 
|  |  | 
|  | #if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ALTERA) && defined(CONFIG_FPGA_CYCLON2) | 
|  |  | 
|  | /* Define FPGA_DEBUG to get debug printf's */ | 
|  | #ifdef	FPGA_DEBUG | 
|  | #define PRINTF(fmt,args...)	printf (fmt ,##args) | 
|  | #else | 
|  | #define PRINTF(fmt,args...) | 
|  | #endif | 
|  |  | 
|  | /* Note: The assumption is that we cannot possibly run fast enough to | 
|  | * overrun the device (the Slave Parallel mode can free run at 50MHz). | 
|  | * If there is a need to operate slower, define CONFIG_FPGA_DELAY in | 
|  | * the board config file to slow things down. | 
|  | */ | 
|  | #ifndef CONFIG_FPGA_DELAY | 
|  | #define CONFIG_FPGA_DELAY() | 
|  | #endif | 
|  |  | 
|  | #ifndef CFG_FPGA_WAIT | 
|  | #define CFG_FPGA_WAIT CFG_HZ/10		/* 100 ms */ | 
|  | #endif | 
|  |  | 
|  | static int CYC2_ps_load( Altera_desc *desc, void *buf, size_t bsize ); | 
|  | static int CYC2_ps_dump( Altera_desc *desc, void *buf, size_t bsize ); | 
|  | /* static int CYC2_ps_info( Altera_desc *desc ); */ | 
|  | static int CYC2_ps_reloc( Altera_desc *desc, ulong reloc_offset ); | 
|  |  | 
|  | /* ------------------------------------------------------------------------- */ | 
|  | /* CYCLON2 Generic Implementation */ | 
|  | int CYC2_load (Altera_desc * desc, void *buf, size_t bsize) | 
|  | { | 
|  | int ret_val = FPGA_FAIL; | 
|  |  | 
|  | switch (desc->iface) { | 
|  | case passive_serial: | 
|  | PRINTF ("%s: Launching Passive Serial Loader\n", __FUNCTION__); | 
|  | ret_val = CYC2_ps_load (desc, buf, bsize); | 
|  | break; | 
|  |  | 
|  | /* Add new interface types here */ | 
|  |  | 
|  | default: | 
|  | printf ("%s: Unsupported interface type, %d\n", | 
|  | __FUNCTION__, desc->iface); | 
|  | } | 
|  |  | 
|  | return ret_val; | 
|  | } | 
|  |  | 
|  | int CYC2_dump (Altera_desc * desc, void *buf, size_t bsize) | 
|  | { | 
|  | int ret_val = FPGA_FAIL; | 
|  |  | 
|  | switch (desc->iface) { | 
|  | case passive_serial: | 
|  | PRINTF ("%s: Launching Passive Serial Dump\n", __FUNCTION__); | 
|  | ret_val = CYC2_ps_dump (desc, buf, bsize); | 
|  | break; | 
|  |  | 
|  | /* Add new interface types here */ | 
|  |  | 
|  | default: | 
|  | printf ("%s: Unsupported interface type, %d\n", | 
|  | __FUNCTION__, desc->iface); | 
|  | } | 
|  |  | 
|  | return ret_val; | 
|  | } | 
|  |  | 
|  | int CYC2_info( Altera_desc *desc ) | 
|  | { | 
|  | return FPGA_SUCCESS; | 
|  | } | 
|  |  | 
|  | int CYC2_reloc (Altera_desc * desc, ulong reloc_offset) | 
|  | { | 
|  | int ret_val = FPGA_FAIL;	/* assume a failure */ | 
|  |  | 
|  | if (desc->family != Altera_CYC2) { | 
|  | printf ("%s: Unsupported family type, %d\n", | 
|  | __FUNCTION__, desc->family); | 
|  | return FPGA_FAIL; | 
|  | } else | 
|  | switch (desc->iface) { | 
|  | case passive_serial: | 
|  | ret_val = CYC2_ps_reloc (desc, reloc_offset); | 
|  | break; | 
|  |  | 
|  | /* Add new interface types here */ | 
|  |  | 
|  | default: | 
|  | printf ("%s: Unsupported interface type, %d\n", | 
|  | __FUNCTION__, desc->iface); | 
|  | } | 
|  |  | 
|  | return ret_val; | 
|  | } | 
|  |  | 
|  | /* ------------------------------------------------------------------------- */ | 
|  | /* CYCLON2 Passive Serial Generic Implementation                                  */ | 
|  | static int CYC2_ps_load (Altera_desc * desc, void *buf, size_t bsize) | 
|  | { | 
|  | int ret_val = FPGA_FAIL;	/* assume the worst */ | 
|  | Altera_CYC2_Passive_Serial_fns *fn = desc->iface_fns; | 
|  | int	ret = 0; | 
|  |  | 
|  | PRINTF ("%s: start with interface functions @ 0x%p\n", | 
|  | __FUNCTION__, fn); | 
|  |  | 
|  | if (fn) { | 
|  | int cookie = desc->cookie;	/* make a local copy */ | 
|  | unsigned long ts;		/* timestamp */ | 
|  |  | 
|  | PRINTF ("%s: Function Table:\n" | 
|  | "ptr:\t0x%p\n" | 
|  | "struct: 0x%p\n" | 
|  | "config:\t0x%p\n" | 
|  | "status:\t0x%p\n" | 
|  | "write:\t0x%p\n" | 
|  | "done:\t0x%p\n\n", | 
|  | __FUNCTION__, &fn, fn, fn->config, fn->status, | 
|  | fn->write, fn->done); | 
|  | #ifdef CFG_FPGA_PROG_FEEDBACK | 
|  | printf ("Loading FPGA Device %d...", cookie); | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * Run the pre configuration function if there is one. | 
|  | */ | 
|  | if (*fn->pre) { | 
|  | (*fn->pre) (cookie); | 
|  | } | 
|  |  | 
|  | /* Establish the initial state */ | 
|  | (*fn->config) (TRUE, TRUE, cookie);	/* Assert nCONFIG */ | 
|  |  | 
|  | udelay(2);		/* T_cfg > 2us	*/ | 
|  |  | 
|  | /* Wait for nSTATUS to be asserted */ | 
|  | ts = get_timer (0);		/* get current time */ | 
|  | do { | 
|  | CONFIG_FPGA_DELAY (); | 
|  | if (get_timer (ts) > CFG_FPGA_WAIT) {	/* check the time */ | 
|  | puts ("** Timeout waiting for STATUS to go high.\n"); | 
|  | (*fn->abort) (cookie); | 
|  | return FPGA_FAIL; | 
|  | } | 
|  | } while (!(*fn->status) (cookie)); | 
|  |  | 
|  | /* Get ready for the burn */ | 
|  | CONFIG_FPGA_DELAY (); | 
|  |  | 
|  | ret = (*fn->write) (buf, bsize, TRUE, cookie); | 
|  | if (ret) { | 
|  | puts ("** Write failed.\n"); | 
|  | (*fn->abort) (cookie); | 
|  | return FPGA_FAIL; | 
|  | } | 
|  | #ifdef CFG_FPGA_PROG_FEEDBACK | 
|  | puts(" OK? ..."); | 
|  | #endif | 
|  |  | 
|  | CONFIG_FPGA_DELAY (); | 
|  |  | 
|  | #ifdef CFG_FPGA_PROG_FEEDBACK | 
|  | putc (' ');			/* terminate the dotted line */ | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * Checking FPGA's CONF_DONE signal - correctly booted ? | 
|  | */ | 
|  |  | 
|  | if ( ! (*fn->done) (cookie) ) { | 
|  | puts ("** Booting failed! CONF_DONE is still deasserted.\n"); | 
|  | (*fn->abort) (cookie); | 
|  | return (FPGA_FAIL); | 
|  | } | 
|  | #ifdef CFG_FPGA_PROG_FEEDBACK | 
|  | puts(" OK\n"); | 
|  | #endif | 
|  |  | 
|  | ret_val = FPGA_SUCCESS; | 
|  |  | 
|  | #ifdef CFG_FPGA_PROG_FEEDBACK | 
|  | if (ret_val == FPGA_SUCCESS) { | 
|  | puts ("Done.\n"); | 
|  | } | 
|  | else { | 
|  | puts ("Fail.\n"); | 
|  | } | 
|  | #endif | 
|  | (*fn->post) (cookie); | 
|  |  | 
|  | } else { | 
|  | printf ("%s: NULL Interface function table!\n", __FUNCTION__); | 
|  | } | 
|  |  | 
|  | return ret_val; | 
|  | } | 
|  |  | 
|  | static int CYC2_ps_dump (Altera_desc * desc, void *buf, size_t bsize) | 
|  | { | 
|  | /* Readback is only available through the Slave Parallel and         */ | 
|  | /* boundary-scan interfaces.                                         */ | 
|  | printf ("%s: Passive Serial Dumping is unavailable\n", | 
|  | __FUNCTION__); | 
|  | return FPGA_FAIL; | 
|  | } | 
|  |  | 
|  | static int CYC2_ps_reloc (Altera_desc * desc, ulong reloc_offset) | 
|  | { | 
|  | int ret_val = FPGA_FAIL;	/* assume the worst */ | 
|  | Altera_CYC2_Passive_Serial_fns *fn_r, *fn = | 
|  | (Altera_CYC2_Passive_Serial_fns *) (desc->iface_fns); | 
|  |  | 
|  | if (fn) { | 
|  | ulong addr; | 
|  |  | 
|  | /* Get the relocated table address */ | 
|  | addr = (ulong) fn + reloc_offset; | 
|  | fn_r = (Altera_CYC2_Passive_Serial_fns *) addr; | 
|  |  | 
|  | if (!fn_r->relocated) { | 
|  |  | 
|  | if (memcmp (fn_r, fn, | 
|  | sizeof (Altera_CYC2_Passive_Serial_fns)) | 
|  | == 0) { | 
|  | /* good copy of the table, fix the descriptor pointer */ | 
|  | desc->iface_fns = fn_r; | 
|  | } else { | 
|  | PRINTF ("%s: Invalid function table at 0x%p\n", | 
|  | __FUNCTION__, fn_r); | 
|  | return FPGA_FAIL; | 
|  | } | 
|  |  | 
|  | PRINTF ("%s: Relocating descriptor at 0x%p\n", __FUNCTION__, | 
|  | desc); | 
|  |  | 
|  | addr = (ulong) (fn->pre) + reloc_offset; | 
|  | fn_r->pre = (Altera_pre_fn) addr; | 
|  |  | 
|  | addr = (ulong) (fn->config) + reloc_offset; | 
|  | fn_r->config = (Altera_config_fn) addr; | 
|  |  | 
|  | addr = (ulong) (fn->status) + reloc_offset; | 
|  | fn_r->status = (Altera_status_fn) addr; | 
|  |  | 
|  | addr = (ulong) (fn->done) + reloc_offset; | 
|  | fn_r->done = (Altera_done_fn) addr; | 
|  |  | 
|  | addr = (ulong) (fn->write) + reloc_offset; | 
|  | fn_r->write = (Altera_write_fn) addr; | 
|  |  | 
|  | addr = (ulong) (fn->abort) + reloc_offset; | 
|  | fn_r->abort = (Altera_abort_fn) addr; | 
|  |  | 
|  | addr = (ulong) (fn->post) + reloc_offset; | 
|  | fn_r->post = (Altera_post_fn) addr; | 
|  |  | 
|  | fn_r->relocated = TRUE; | 
|  |  | 
|  | } else { | 
|  | /* this table has already been moved */ | 
|  | /* XXX - should check to see if the descriptor is correct */ | 
|  | desc->iface_fns = fn_r; | 
|  | } | 
|  |  | 
|  | ret_val = FPGA_SUCCESS; | 
|  | } else { | 
|  | printf ("%s: NULL Interface function table!\n", __FUNCTION__); | 
|  | } | 
|  |  | 
|  | return ret_val; | 
|  | } | 
|  |  | 
|  | #endif /* CONFIG_FPGA && CONFIG_FPGA_ALTERA && CONFIG_FPGA_CYCLON2 */ |