| /* |
| * (C) Copyright 2003 |
| * Martin Winistoerfer, martinwinistoerfer@gmx.ch. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| /* |
| * File: mpc5xx.h |
| * |
| * Discription: mpc5xx specific definitions |
| * |
| */ |
| |
| #ifndef __MPC5XX_H__ |
| #define __MPC5XX_H__ |
| |
| |
| /*----------------------------------------------------------------------- |
| * Exception offsets (PowerPC standard) |
| */ |
| #define EXC_OFF_SYS_RESET 0x0100 /* System reset */ |
| #define _START_OFFSET EXC_OFF_SYS_RESET |
| |
| /*----------------------------------------------------------------------- |
| * ISB bit in IMMR to set internal memory map |
| */ |
| |
| #define CFG_ISB ((CFG_IMMR / 0x00400000) << 1) |
| |
| /*----------------------------------------------------------------------- |
| * SYPCR - System Protection Control Register |
| */ |
| #define SYPCR_SWTC 0xffff0000 /* Software Watchdog Timer Count */ |
| #define SYPCR_BMT 0x0000ff00 /* Bus Monitor Timing */ |
| #define SYPCR_BME 0x00000080 /* Bus Monitor Enable */ |
| #define SYPCR_SWF 0x00000008 /* Software Watchdog Freeze */ |
| #define SYPCR_SWE 0x00000004 /* Software Watchdog Enable */ |
| #define SYPCR_SWRI 0x00000002 /* Software Watchdog Reset/Int Select */ |
| #define SYPCR_SWP 0x00000001 /* Software Watchdog Prescale */ |
| |
| /*----------------------------------------------------------------------- |
| * SIUMCR - SIU Module Configuration Register |
| */ |
| #define SIUMCR_EARB 0x80000000 /* External Arbitration */ |
| #define SIUMCR_EARP0 0x00000000 /* External Arbi. Request priority 0 */ |
| #define SIUMCR_EARP1 0x10000000 /* External Arbi. Request priority 1 */ |
| #define SIUMCR_EARP2 0x20000000 /* External Arbi. Request priority 2 */ |
| #define SIUMCR_EARP3 0x30000000 /* External Arbi. Request priority 3 */ |
| #define SIUMCR_EARP4 0x40000000 /* External Arbi. Request priority 4 */ |
| #define SIUMCR_EARP5 0x50000000 /* External Arbi. Request priority 5 */ |
| #define SIUMCR_EARP6 0x60000000 /* External Arbi. Request priority 6 */ |
| #define SIUMCR_EARP7 0x70000000 /* External Arbi. Request priority 7 */ |
| #define SIUMCR_DSHW 0x00800000 /* Data Showcycles */ |
| #define SIUMCR_DBGC00 0x00000000 /* Debug pins configuration */ |
| #define SIUMCR_DBGC01 0x00200000 /* - " - */ |
| #define SIUMCR_DBGC10 0x00400000 /* - " - */ |
| #define SIUMCR_DBGC11 0x00600000 /* - " - */ |
| #define SIUMCR_DBPC00 0x00000000 /* Debug Port pins Config. */ |
| #define SIUMCR_DBPC01 0x00080000 /* - " - */ |
| #define SIUMCR_DBPC10 0x00100000 /* - " - */ |
| #define SIUMCR_DBPC11 0x00180000 /* - " - */ |
| #define SIUMCR_GPC00 0x00000000 /* General Pins Config */ |
| #define SIUMCR_GPC01 0x00020000 /* General Pins Config */ |
| #define SIUMCR_GPC10 0x00040000 /* General Pins Config */ |
| #define SIUMCR_GPC11 0x00060000 /* General Pins Config */ |
| #define SIUMCR_DLK 0x00010000 /* Debug Register Lock */ |
| #define SIUMCR_SC00 0x00000000 /* Multi Chip 32 bit */ |
| #define SIUMCR_SC01 0x00004000 /* Muilt Chip 16 bit */ |
| #define SIUMCR_SC10 0x00004000 /* Single adress show */ |
| #define SIUMCR_SC11 0x00006000 /* Single adress */ |
| #define SIUMCR_RCTX 0x00001000 /* Data Parity pins Config. */ |
| #define SIUMCR_MLRC00 0x00000000 /* Multi Level Reserva. Ctrl */ |
| #define SIUMCR_MLRC01 0x00000400 /* - " - */ |
| #define SIUMCR_MLRC10 0x00000800 /* - " - */ |
| #define SIUMCR_MLRC11 0x00000c00 /* - " - */ |
| #define SIUMCR_MTSC 0x00000100 /* Memory transfer */ |
| |
| /*----------------------------------------------------------------------- |
| * TBSCR - Time Base Status and Control Register |
| */ |
| #define TBSCR_REFA ((ushort)0x0080) /* Reference Interrupt Status A */ |
| #define TBSCR_REFB ((ushort)0x0040) /* Reference Interrupt Status B */ |
| #define TBSCR_TBF ((ushort)0x0002) /* Time Base stops while FREEZE */ |
| |
| /*----------------------------------------------------------------------- |
| * PISCR - Periodic Interrupt Status and Control Register |
| */ |
| #define PISCR_PITF ((ushort)0x0002) /* PIT stops when FREEZE */ |
| #define PISCR_PS 0x0080 /* Periodic Interrupt Status */ |
| |
| /*----------------------------------------------------------------------- |
| * PLPRCR - PLL, Low-Power, and Reset Control Register |
| */ |
| #define PLPRCR_MF_MSK 0xfff00000 /* MF mask */ |
| #define PLPRCR_DIVF_MSK 0x0000001f /* DIVF mask */ |
| #define PLPRCR_CSRC_MSK 0x00000400 /* CSRC mask */ |
| #define PLPRCR_MF_SHIFT 0x00000014 /* Multiplication factor shift value */ |
| #define PLPRCR_DIVF_0 0x00000000 /* Division factor 0 */ |
| #define PLPRCR_MF_9 0x00900000 /* Mulitipliaction factor 9 */ |
| #define PLPRCR_TEXPS 0x00004000 /* TEXP Status */ |
| #define PLPRCR_TMIST 0x00001000 /* Timers Interrupt Status */ |
| #define PLPRCR_CSR 0x00000080 /* CheskStop Reset value */ |
| #define PLPRCR_SPLSS 0x00008000 /* SPLL Lock Status Sticky bit */ |
| |
| /*----------------------------------------------------------------------- |
| * SCCR - System Clock and reset Control Register |
| */ |
| #define SCCR_DFNL_MSK 0x00000070 /* DFNL mask */ |
| #define SCCR_DFNH_MSK 0x00000007 /* DFNH mask */ |
| #define SCCR_DFNL_SHIFT 0x0000004 /* DFNL shift value */ |
| #define SCCR_RTSEL 0x00100000 /* RTC circuit input source select */ |
| #define SCCR_EBDF00 0x00000000 /* Division factor 1. CLKOUT is GCLK2 */ |
| #define SCCR_EBDF11 0x00060000 /* reserved */ |
| #define SCCR_TBS 0x02000000 /* Time Base Source */ |
| #define SCCR_RTDIV 0x01000000 /* RTC Clock Divide */ |
| #define SCCR_COM00 0x00000000 /* full strength CLKOUT output buffer */ |
| #define SCCR_COM01 0x20000000 /* half strength CLKOUT output buffer */ |
| #define SCCR_DFNL000 0x00000000 /* Division by 2 (default = minimum) */ |
| #define SCCR_DFNH000 0x00000000 /* Division by 1 (default = minimum) */ |
| |
| /*----------------------------------------------------------------------- |
| * MC - Memory Controller |
| */ |
| #define BR_V 0x00000001 /* Bank valid */ |
| #define BR_BI 0x00000002 /* Burst inhibit */ |
| #define BR_PS_8 0x00000400 /* 8 bit port size */ |
| #define BR_PS_16 0x00000800 /* 16 bit port size */ |
| #define BR_PS_32 0x00000000 /* 32 bit port size */ |
| #define BR_LBDIR 0x00000008 /* Late burst data in progess */ |
| #define BR_SETA 0x00000004 /* External Data Acknowledge */ |
| #define OR_SCY_3 0x00000030 /* 3 clock cycles wait states */ |
| #define OR_SCY_1 0x00000000 /* 1 clock cycle wait state */ |
| #define OR_SCY_8 0x00000080 /* 8 clock cycles wait states */ |
| #define OR_TRLX 0x00000001 /* Timing relaxed */ |
| #define OR_BSCY 0x00000060 /* Burst beats length in clocks */ |
| #define OR_ACS_10 0x00000600 /* Adress to chip-select setup */ |
| #define OR_CSNT 0x00000800 /* Chip-select negotation time */ |
| #define OR_ETHR 0x00000100 /* Extended hold time on read */ |
| #define OR_ADDR_MK_FF 0xFF000000 |
| #define OR_ADDR_MK_FFFF 0xFFFF0000 |
| |
| /*----------------------------------------------------------------------- |
| * UMCR - UIMB Module Configuration Register |
| */ |
| #define UMCR_FSPEED 0x00000000 /* Full speed. Opposit of UMCR_HSPEED */ |
| #define UMCR_HSPEED 0x10000000 /* Half speed */ |
| |
| /*----------------------------------------------------------------------- |
| * ICTRL - I-Bus Support Control Register |
| */ |
| #define ICTRL_ISCT_SER_7 0x00000007 /* All indirect change of flow */ |
| |
| |
| #define NR_IRQS 0 /* Place this later in a separate file */ |
| |
| /*----------------------------------------------------------------------- |
| * SCI - Serial communication interface |
| */ |
| |
| #define SCI_TDRE 0x0100 /* Transmit data register empty */ |
| #define SCI_TE 0x0008 /* Transmitter enabled */ |
| #define SCI_RE 0x0004 /* Receiver enabled */ |
| #define SCI_RDRF 0x0040 /* Receive data register full */ |
| #define SCI_PE 0x0400 /* Parity enable */ |
| #define SCI_SCXBR_MK 0x1fff /* Baudrate mask */ |
| #define SCI_SCXDR_MK 0x00ff /* Data register mask */ |
| #define SCI_M_11 0x0200 /* Frame size is 11 bit */ |
| #define SCI_M_10 0x0000 /* Frame size is 10 bit */ |
| #define SCI_PORT_1 ((int)1) /* Place this later somewhere better */ |
| #define SCI_PORT_2 ((int)2) |
| |
| #endif /* __MPC5XX_H__ */ |
