|  | /* | 
|  | * (C) Copyright 2003, Psyent Corporation <www.psyent.com> | 
|  | * Scott McNutt <smcnutt@psyent.com> | 
|  | * | 
|  | * See file CREDITS for list of people who contributed to this | 
|  | * project. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License as | 
|  | * published by the Free Software Foundation; either version 2 of | 
|  | * the License, or (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | 
|  | * MA 02111-1307 USA | 
|  | */ | 
|  |  | 
|  | #include <common.h> | 
|  |  | 
|  | #if defined(CONFIG_NIOS_ASMI) | 
|  | #include <command.h> | 
|  | #include <nios-io.h> | 
|  |  | 
|  | #if !defined(CFG_NIOS_ASMIBASE) | 
|  | #error "*** CFG_NIOS_ASMIBASE not defined ***" | 
|  | #endif | 
|  |  | 
|  | /*-----------------------------------------------------------------------*/ | 
|  | #define SHORT_HELP\ | 
|  | "asmi    - read/write Cyclone ASMI configuration device.\n" | 
|  |  | 
|  | #define LONG_HELP\ | 
|  | "\n"\ | 
|  | "asmi erase start [end]\n"\ | 
|  | "    - erase sector start or sectors start through end.\n"\ | 
|  | "asmi info\n"\ | 
|  | "    - display ASMI device information.\n"\ | 
|  | "asmi protect on | off\n"\ | 
|  | "    - turn device protection on or off.\n"\ | 
|  | "asmi read addr offset count\n"\ | 
|  | "    - read count bytes from offset to addr.\n"\ | 
|  | "asmi write addr offset count\n"\ | 
|  | "    - write count bytes to offset from addr.\n"\ | 
|  | "asmi verify addr offset count\n"\ | 
|  | "    - verify count bytes at offset from addr.\n" | 
|  |  | 
|  |  | 
|  | /*-----------------------------------------------------------------------*/ | 
|  | /* Operation codes for serial configuration devices | 
|  | */ | 
|  | #define ASMI_WRITE_ENA		0x06	/* Write enable */ | 
|  | #define ASMI_WRITE_DIS		0x04	/* Write disable */ | 
|  | #define ASMI_READ_STAT		0x05	/* Read status */ | 
|  | #define ASMI_READ_BYTES		0x03	/* Read bytes */ | 
|  | #define ASMI_READ_ID		0xab	/* Read silicon id */ | 
|  | #define ASMI_WRITE_STAT		0x01	/* Write status */ | 
|  | #define ASMI_WRITE_BYTES	0x02	/* Write bytes */ | 
|  | #define ASMI_ERASE_BULK		0xc7	/* Erase entire device */ | 
|  | #define ASMI_ERASE_SECT		0xd8	/* Erase sector */ | 
|  |  | 
|  | /* Device status register bits | 
|  | */ | 
|  | #define ASMI_STATUS_WIP		(1<<0)	/* Write in progress */ | 
|  | #define ASMI_STATUS_WEL		(1<<1)	/* Write enable latch */ | 
|  |  | 
|  | static nios_asmi_t *asmi = (nios_asmi_t *)CFG_NIOS_ASMIBASE; | 
|  |  | 
|  | /*********************************************************************** | 
|  | * Device access | 
|  | ***********************************************************************/ | 
|  | static void asmi_cs (int assert) | 
|  | { | 
|  | if (assert) { | 
|  | asmi->control |= NIOS_ASMI_SSO; | 
|  | } else { | 
|  | /* Let all bits shift out */ | 
|  | while ((asmi->status & NIOS_ASMI_TMT) == 0) | 
|  | ; | 
|  | asmi->control &= ~NIOS_ASMI_SSO; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void asmi_tx (unsigned char c) | 
|  | { | 
|  | while ((asmi->status & NIOS_ASMI_TRDY) == 0) | 
|  | ; | 
|  | asmi->txdata = c; | 
|  | } | 
|  |  | 
|  | static int asmi_rx (void) | 
|  | { | 
|  | while ((asmi->status & NIOS_ASMI_RRDY) == 0) | 
|  | ; | 
|  | return (asmi->rxdata); | 
|  | } | 
|  |  | 
|  | static unsigned char bitrev[] = { | 
|  | 0x00, 0x08, 0x04, 0x0c, 0x02, 0x0a, 0x06, 0x0e, | 
|  | 0x01, 0x09, 0x05, 0x0d, 0x03, 0x0b, 0x07, 0x0f | 
|  | }; | 
|  |  | 
|  | static unsigned char asmi_bitrev( unsigned char c ) | 
|  | { | 
|  | unsigned char val; | 
|  |  | 
|  | val  = bitrev[c>>4]; | 
|  | val |= bitrev[c & 0x0f]<<4; | 
|  | return (val); | 
|  | } | 
|  |  | 
|  | static void asmi_rcv (unsigned char *dst, int len) | 
|  | { | 
|  | while (len--) { | 
|  | asmi_tx (0); | 
|  | *dst++ = asmi_rx (); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void asmi_rrcv (unsigned char *dst, int len) | 
|  | { | 
|  | while (len--) { | 
|  | asmi_tx (0); | 
|  | *dst++ = asmi_bitrev (asmi_rx ()); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void asmi_snd (unsigned char *src, int len) | 
|  | { | 
|  | while (len--) { | 
|  | asmi_tx (*src++); | 
|  | asmi_rx (); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void asmi_rsnd (unsigned char *src, int len) | 
|  | { | 
|  | while (len--) { | 
|  | asmi_tx (asmi_bitrev (*src++)); | 
|  | asmi_rx (); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void asmi_wr_enable (void) | 
|  | { | 
|  | asmi_cs (1); | 
|  | asmi_tx (ASMI_WRITE_ENA); | 
|  | asmi_rx (); | 
|  | asmi_cs (0); | 
|  | } | 
|  |  | 
|  | static unsigned char asmi_status_rd (void) | 
|  | { | 
|  | unsigned char status; | 
|  |  | 
|  | asmi_cs (1); | 
|  | asmi_tx (ASMI_READ_STAT); | 
|  | asmi_rx (); | 
|  | asmi_tx (0); | 
|  | status = asmi_rx (); | 
|  | asmi_cs (0); | 
|  | return (status); | 
|  | } | 
|  |  | 
|  | static void asmi_status_wr (unsigned char status) | 
|  | { | 
|  | asmi_wr_enable (); | 
|  | asmi_cs (1); | 
|  | asmi_tx (ASMI_WRITE_STAT); | 
|  | asmi_rx (); | 
|  | asmi_tx (status); | 
|  | asmi_rx (); | 
|  | asmi_cs (0); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /*********************************************************************** | 
|  | * Device information | 
|  | ***********************************************************************/ | 
|  | typedef struct asmi_devinfo_t { | 
|  | const char	*name;		/* Device name */ | 
|  | unsigned char	id;		/* Device silicon id */ | 
|  | unsigned char	size;		/* Total size log2(bytes)*/ | 
|  | unsigned char	num_sects;	/* Number of sectors */ | 
|  | unsigned char	sz_sect;	/* Sector size log2(bytes) */ | 
|  | unsigned char	sz_page;	/* Page size log2(bytes) */ | 
|  | unsigned char   prot_mask;	/* Protection mask */ | 
|  | }asmi_devinfo_t; | 
|  |  | 
|  | static struct asmi_devinfo_t devinfo[] = { | 
|  | { "EPCS1 ", 0x10, 17, 4, 15, 8, 0x0c }, | 
|  | { "EPCS4 ", 0x12, 19, 8, 16, 8, 0x1c }, | 
|  | { 0, 0, 0, 0, 0, 0 } | 
|  | }; | 
|  |  | 
|  | static asmi_devinfo_t *asmi_dev_find (void) | 
|  | { | 
|  | unsigned char buf[4]; | 
|  | unsigned char id; | 
|  | int i; | 
|  | struct asmi_devinfo_t *dev = NULL; | 
|  |  | 
|  | /* Read silicon id requires 3 "dummy bytes" before it's put | 
|  | * on the wire. | 
|  | */ | 
|  | buf[0] = ASMI_READ_ID; | 
|  | buf[1] = 0; | 
|  | buf[2] = 0; | 
|  | buf[3] = 0; | 
|  |  | 
|  | asmi_cs (1); | 
|  | asmi_snd (buf,4); | 
|  | asmi_rcv (buf,1); | 
|  | asmi_cs (0); | 
|  | id = buf[0]; | 
|  |  | 
|  | /* Find the info struct */ | 
|  | i = 0; | 
|  | while (devinfo[i].name) { | 
|  | if (id == devinfo[i].id) { | 
|  | dev = &devinfo[i]; | 
|  | break; | 
|  | } | 
|  | i++; | 
|  | } | 
|  |  | 
|  | return (dev); | 
|  | } | 
|  |  | 
|  | /*********************************************************************** | 
|  | * Misc Utilities | 
|  | ***********************************************************************/ | 
|  | static unsigned asmi_cfgsz (void) | 
|  | { | 
|  | unsigned sz = 0; | 
|  | unsigned char buf[128]; | 
|  | unsigned char *p; | 
|  |  | 
|  | /* Read in the first 128 bytes of the device */ | 
|  | buf[0] = ASMI_READ_BYTES; | 
|  | buf[1] = 0; | 
|  | buf[2] = 0; | 
|  | buf[3] = 0; | 
|  |  | 
|  | asmi_cs (1); | 
|  | asmi_snd (buf,4); | 
|  | asmi_rrcv (buf, sizeof(buf)); | 
|  | asmi_cs (0); | 
|  |  | 
|  | /* Search for the starting 0x6a which is followed by the | 
|  | * 4-byte 'register' and 4-byte bit-count. | 
|  | */ | 
|  | p = buf; | 
|  | while (p < buf + sizeof(buf)-8) { | 
|  | if ( *p == 0x6a ) { | 
|  | /* Point to bit count and extract */ | 
|  | p += 5; | 
|  | sz = *p++; | 
|  | sz |= *p++ << 8; | 
|  | sz |= *p++ << 16; | 
|  | sz |= *p++ << 24; | 
|  | /* Convert to byte count */ | 
|  | sz += 7; | 
|  | sz >>= 3; | 
|  | } else if (*p == 0xff) { | 
|  | /* 0xff is ok ... just skip */ | 
|  | p++; | 
|  | continue; | 
|  | } else { | 
|  | /* Not 0xff or 0x6a ... something's not | 
|  | * right ... report 'unknown' (sz=0). | 
|  | */ | 
|  | break; | 
|  | } | 
|  | } | 
|  | return (sz); | 
|  | } | 
|  |  | 
|  | static int asmi_erase (unsigned start, unsigned end) | 
|  | { | 
|  | unsigned off, sectsz; | 
|  | unsigned char buf[4]; | 
|  | struct asmi_devinfo_t *dev = asmi_dev_find (); | 
|  |  | 
|  | if (!dev || (start>end)) | 
|  | return (-1); | 
|  |  | 
|  | /* Erase the requested sectors. An address is required | 
|  | * that lies within the requested sector -- we'll just | 
|  | * use the first address in the sector. | 
|  | */ | 
|  | printf ("asmi erasing sector %d ", start); | 
|  | if (start != end) | 
|  | printf ("to %d ", end); | 
|  | sectsz = (1 << dev->sz_sect); | 
|  | while (start <= end) { | 
|  | off = start * sectsz; | 
|  | start++; | 
|  |  | 
|  | buf[0] = ASMI_ERASE_SECT; | 
|  | buf[1] = off >> 16; | 
|  | buf[2] = off >> 8; | 
|  | buf[3] = off; | 
|  |  | 
|  | asmi_wr_enable (); | 
|  | asmi_cs (1); | 
|  | asmi_snd (buf,4); | 
|  | asmi_cs (0); | 
|  |  | 
|  | printf ("."); /* Some user feedback */ | 
|  |  | 
|  | /* Wait for erase to complete */ | 
|  | while (asmi_status_rd() & ASMI_STATUS_WIP) | 
|  | ; | 
|  | } | 
|  | printf (" done.\n"); | 
|  | return (0); | 
|  | } | 
|  |  | 
|  | static int asmi_read (ulong addr, ulong off, ulong cnt) | 
|  | { | 
|  | unsigned char buf[4]; | 
|  |  | 
|  | buf[0] = ASMI_READ_BYTES; | 
|  | buf[1] = off >> 16; | 
|  | buf[2] = off >> 8; | 
|  | buf[3] = off; | 
|  |  | 
|  | asmi_cs (1); | 
|  | asmi_snd (buf,4); | 
|  | asmi_rrcv ((unsigned char *)addr, cnt); | 
|  | asmi_cs (0); | 
|  |  | 
|  | return (0); | 
|  | } | 
|  |  | 
|  | static | 
|  | int asmi_write (ulong addr, ulong off, ulong cnt) | 
|  | { | 
|  | ulong wrcnt; | 
|  | unsigned pgsz; | 
|  | unsigned char buf[4]; | 
|  | struct asmi_devinfo_t *dev = asmi_dev_find (); | 
|  |  | 
|  | if (!dev) | 
|  | return (-1); | 
|  |  | 
|  | pgsz = (1<<dev->sz_page); | 
|  | while (cnt) { | 
|  | if (off % pgsz) | 
|  | wrcnt = pgsz - (off % pgsz); | 
|  | else | 
|  | wrcnt = pgsz; | 
|  | wrcnt = (wrcnt > cnt) ? cnt : wrcnt; | 
|  |  | 
|  | buf[0] = ASMI_WRITE_BYTES; | 
|  | buf[1] = off >> 16; | 
|  | buf[2] = off >> 8; | 
|  | buf[3] = off; | 
|  |  | 
|  | asmi_wr_enable (); | 
|  | asmi_cs (1); | 
|  | asmi_snd (buf,4); | 
|  | asmi_rsnd ((unsigned char *)addr, wrcnt); | 
|  | asmi_cs (0); | 
|  |  | 
|  | /* Wait for write to complete */ | 
|  | while (asmi_status_rd() & ASMI_STATUS_WIP) | 
|  | ; | 
|  |  | 
|  | cnt -= wrcnt; | 
|  | off += wrcnt; | 
|  | addr += wrcnt; | 
|  | } | 
|  |  | 
|  | return (0); | 
|  | } | 
|  |  | 
|  | static | 
|  | int asmi_verify (ulong addr, ulong off, ulong cnt, ulong *err) | 
|  | { | 
|  | ulong rdcnt; | 
|  | unsigned char buf[256]; | 
|  | unsigned char *start,*end; | 
|  | int i; | 
|  |  | 
|  | start = end = (unsigned char *)addr; | 
|  | while (cnt) { | 
|  | rdcnt = (cnt>sizeof(buf)) ? sizeof(buf) : cnt; | 
|  | asmi_read ((ulong)buf, off, rdcnt); | 
|  | for (i=0; i<rdcnt; i++) { | 
|  | if (*end != buf[i]) { | 
|  | *err = end - start; | 
|  | return(-1); | 
|  | } | 
|  | end++; | 
|  | } | 
|  | cnt -= rdcnt; | 
|  | off += rdcnt; | 
|  | } | 
|  | return (0); | 
|  | } | 
|  |  | 
|  | static int asmi_sect_erased (int sect, unsigned *offset, | 
|  | struct asmi_devinfo_t *dev) | 
|  | { | 
|  | unsigned char buf[128]; | 
|  | unsigned off, end; | 
|  | unsigned sectsz; | 
|  | int i; | 
|  |  | 
|  | sectsz = (1 << dev->sz_sect); | 
|  | off = sectsz * sect; | 
|  | end = off + sectsz; | 
|  |  | 
|  | while (off < end) { | 
|  | asmi_read ((ulong)buf, off, sizeof(buf)); | 
|  | for (i=0; i < sizeof(buf); i++) { | 
|  | if (buf[i] != 0xff) { | 
|  | *offset = off + i; | 
|  | return (0); | 
|  | } | 
|  | } | 
|  | off += sizeof(buf); | 
|  | } | 
|  | return (1); | 
|  | } | 
|  |  | 
|  |  | 
|  | /*********************************************************************** | 
|  | * Commands | 
|  | ***********************************************************************/ | 
|  | static | 
|  | void do_asmi_info (struct asmi_devinfo_t *dev, int argc, char *argv[]) | 
|  | { | 
|  | int i; | 
|  | unsigned char stat; | 
|  | unsigned tmp; | 
|  | int erased; | 
|  |  | 
|  | /* Basic device info */ | 
|  | printf ("%s: %d kbytes (%d sectors x %d kbytes," | 
|  | " %d bytes/page)\n", | 
|  | dev->name, 1 << (dev->size-10), | 
|  | dev->num_sects, 1 << (dev->sz_sect-10), | 
|  | 1 << dev->sz_page ); | 
|  |  | 
|  | /* Status -- for now protection is all-or-nothing */ | 
|  | stat = asmi_status_rd(); | 
|  | printf ("status: 0x%02x (WIP:%d, WEL:%d, PROT:%s)\n", | 
|  | stat, | 
|  | (stat & ASMI_STATUS_WIP) ? 1 : 0, | 
|  | (stat & ASMI_STATUS_WEL) ? 1 : 0, | 
|  | (stat & dev->prot_mask) ? "on" : "off" ); | 
|  |  | 
|  | /* Configuration  */ | 
|  | tmp = asmi_cfgsz (); | 
|  | if (tmp) { | 
|  | printf ("config: 0x%06x (%d) bytes\n", tmp, tmp ); | 
|  | } else { | 
|  | printf ("config: unknown\n" ); | 
|  | } | 
|  |  | 
|  | /* Sector info */ | 
|  | for (i=0; i<dev->num_sects; i++) { | 
|  | erased = asmi_sect_erased (i, &tmp, dev); | 
|  | printf ("     %d: %06x ", | 
|  | i, i*(1<<dev->sz_sect) ); | 
|  | if (erased) | 
|  | printf ("erased\n"); | 
|  | else | 
|  | printf ("data @ 0x%06x\n", tmp); | 
|  | } | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | static | 
|  | void do_asmi_erase (struct asmi_devinfo_t *dev, int argc, char *argv[]) | 
|  | { | 
|  | unsigned start,end; | 
|  |  | 
|  | if ((argc < 3) || (argc > 4)) { | 
|  | printf ("USAGE: asmi erase sect [end]\n"); | 
|  | return; | 
|  | } | 
|  | if ((asmi_status_rd() & dev->prot_mask) != 0) { | 
|  | printf ( "asmi: device protected.\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | start = simple_strtoul (argv[2], NULL, 10); | 
|  | if (argc > 3) | 
|  | end = simple_strtoul (argv[3], NULL, 10); | 
|  | else | 
|  | end = start; | 
|  | if ((start >= dev->num_sects) || (start > end)) { | 
|  | printf ("asmi: invalid sector range: [%d:%d]\n", | 
|  | start, end ); | 
|  | return; | 
|  | } | 
|  |  | 
|  | asmi_erase (start, end); | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | static | 
|  | void do_asmi_protect (struct asmi_devinfo_t *dev, int argc, char *argv[]) | 
|  | { | 
|  | unsigned char stat; | 
|  |  | 
|  | /* For now protection is all-or-nothing to keep things | 
|  | * simple. The protection bits don't map in a linear | 
|  | * fashion ... and we would rather protect the bottom | 
|  | * of the device since it contains the config data and | 
|  | * leave the top unprotected for app use. But unfortunately | 
|  | * protection works from top-to-bottom so it does | 
|  | * really help very much from a software app point-of-view. | 
|  | */ | 
|  | if (argc < 3) { | 
|  | printf ("USAGE: asmi protect on | off\n"); | 
|  | return; | 
|  | } | 
|  | if (!dev) | 
|  | return; | 
|  |  | 
|  | /* Protection on/off is just a matter of setting/clearing | 
|  | * all protection bits in the status register. | 
|  | */ | 
|  | stat = asmi_status_rd (); | 
|  | if (strcmp ("on", argv[2]) == 0) { | 
|  | stat |= dev->prot_mask; | 
|  | } else if (strcmp ("off", argv[2]) == 0 ) { | 
|  | stat &= ~dev->prot_mask; | 
|  | } else { | 
|  | printf ("asmi: unknown protection: %s\n", argv[2]); | 
|  | return; | 
|  | } | 
|  | asmi_status_wr (stat); | 
|  | return; | 
|  | } | 
|  |  | 
|  | static | 
|  | void do_asmi_read (struct asmi_devinfo_t *dev, int argc, char *argv[]) | 
|  | { | 
|  | ulong addr,off,cnt; | 
|  | ulong sz; | 
|  |  | 
|  | if (argc < 5) { | 
|  | printf ("USAGE: asmi read addr offset count\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | sz = 1 << dev->size; | 
|  | addr = simple_strtoul (argv[2], NULL, 16); | 
|  | off  = simple_strtoul (argv[3], NULL, 16); | 
|  | cnt  = simple_strtoul (argv[4], NULL, 16); | 
|  | if (off > sz) { | 
|  | printf ("offset is greater than device size" | 
|  | "... aborting.\n"); | 
|  | return; | 
|  | } | 
|  | if ((off + cnt) > sz) { | 
|  | printf ("request exceeds device size" | 
|  | "... truncating.\n"); | 
|  | cnt = sz - off; | 
|  | } | 
|  | printf ("asmi: read %08lx <- %06lx (0x%lx bytes)\n", | 
|  | addr, off, cnt); | 
|  | asmi_read (addr, off, cnt); | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | static | 
|  | void do_asmi_write (struct asmi_devinfo_t *dev, int argc, char *argv[]) | 
|  | { | 
|  | ulong addr,off,cnt; | 
|  | ulong sz; | 
|  | ulong err; | 
|  |  | 
|  | if (argc < 5) { | 
|  | printf ("USAGE: asmi write addr offset count\n"); | 
|  | return; | 
|  | } | 
|  | if ((asmi_status_rd() & dev->prot_mask) != 0) { | 
|  | printf ( "asmi: device protected.\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | sz = 1 << dev->size; | 
|  | addr = simple_strtoul (argv[2], NULL, 16); | 
|  | off  = simple_strtoul (argv[3], NULL, 16); | 
|  | cnt  = simple_strtoul (argv[4], NULL, 16); | 
|  | if (off > sz) { | 
|  | printf ("offset is greater than device size" | 
|  | "... aborting.\n"); | 
|  | return; | 
|  | } | 
|  | if ((off + cnt) > sz) { | 
|  | printf ("request exceeds device size" | 
|  | "... truncating.\n"); | 
|  | cnt = sz - off; | 
|  | } | 
|  | printf ("asmi: write %08lx -> %06lx (0x%lx bytes)\n", | 
|  | addr, off, cnt); | 
|  | asmi_write (addr, off, cnt); | 
|  | if (asmi_verify (addr, off, cnt, &err) != 0) | 
|  | printf ("asmi: write error at offset %06lx\n", err); | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | static | 
|  | void do_asmi_verify (struct asmi_devinfo_t *dev, int argc, char *argv[]) | 
|  | { | 
|  | ulong addr,off,cnt; | 
|  | ulong sz; | 
|  | ulong err; | 
|  |  | 
|  | if (argc < 5) { | 
|  | printf ("USAGE: asmi verify addr offset count\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | sz = 1 << dev->size; | 
|  | addr = simple_strtoul (argv[2], NULL, 16); | 
|  | off  = simple_strtoul (argv[3], NULL, 16); | 
|  | cnt  = simple_strtoul (argv[4], NULL, 16); | 
|  | if (off > sz) { | 
|  | printf ("offset is greater than device size" | 
|  | "... aborting.\n"); | 
|  | return; | 
|  | } | 
|  | if ((off + cnt) > sz) { | 
|  | printf ("request exceeds device size" | 
|  | "... truncating.\n"); | 
|  | cnt = sz - off; | 
|  | } | 
|  | printf ("asmi: verify %08lx -> %06lx (0x%lx bytes)\n", | 
|  | addr, off, cnt); | 
|  | if (asmi_verify (addr, off, cnt, &err) != 0) | 
|  | printf ("asmi: verify error at offset %06lx\n", err); | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | /*-----------------------------------------------------------------------*/ | 
|  | int do_asmi (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) | 
|  | { | 
|  | int len; | 
|  | struct asmi_devinfo_t *dev = asmi_dev_find (); | 
|  |  | 
|  | if (argc < 2) { | 
|  | printf ("Usage:%s", LONG_HELP); | 
|  | return (0); | 
|  | } | 
|  |  | 
|  | if (!dev) { | 
|  | printf ("asmi: device not found.\n"); | 
|  | return (0); | 
|  | } | 
|  |  | 
|  | len = strlen (argv[1]); | 
|  | if (strncmp ("info", argv[1], len) == 0) { | 
|  | do_asmi_info ( dev, argc, argv); | 
|  | } else if (strncmp ("erase", argv[1], len) == 0) { | 
|  | do_asmi_erase (dev, argc, argv); | 
|  | } else if (strncmp ("protect", argv[1], len) == 0) { | 
|  | do_asmi_protect (dev, argc, argv); | 
|  | } else if (strncmp ("read", argv[1], len) == 0) { | 
|  | do_asmi_read (dev, argc, argv); | 
|  | } else if (strncmp ("write", argv[1], len) == 0) { | 
|  | do_asmi_write (dev, argc, argv); | 
|  | } else if (strncmp ("verify", argv[1], len) == 0) { | 
|  | do_asmi_verify (dev, argc, argv); | 
|  | } else { | 
|  | printf ("asmi: unknown operation: %s\n", argv[1]); | 
|  | } | 
|  |  | 
|  | return (0); | 
|  | } | 
|  |  | 
|  | /*-----------------------------------------------------------------------*/ | 
|  |  | 
|  |  | 
|  | U_BOOT_CMD( asmi, 5, 0, do_asmi, SHORT_HELP, LONG_HELP ); | 
|  |  | 
|  | #endif /* CONFIG_NIOS_ASMI */ |