include/configs/mx51evk.h - u-boot - Git at Google


            
            /*

            
             * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>

            
             *

            
             * (C) Copyright 2009 Freescale Semiconductor, Inc.

            
             *

            
             * Configuration settings for the MX51EVK Board

            
             *

            
             * SPDX-License-Identifier:	GPL-2.0+

            
             */


            #ifndef __CONFIG_H

            
            #define __CONFIG_H


             /* High Level Configuration Options */


            #define CONFIG_MX51	/* in a mx51 */


            #define CONFIG_DISPLAY_CPUINFO

            
            #define CONFIG_DISPLAY_BOARDINFO


            #define CONFIG_SYS_TEXT_BASE	0x97800000


            #include <asm/arch/imx-regs.h>


            #define CONFIG_CMDLINE_TAG			/* enable passing of ATAGs */

            
            #define CONFIG_SETUP_MEMORY_TAGS

            
            #define CONFIG_INITRD_TAG

            
            #define CONFIG_REVISION_TAG

            
            #define CONFIG_SYS_GENERIC_BOARD


            #define CONFIG_OF_LIBFDT


            #define CONFIG_MACH_TYPE	MACH_TYPE_MX51_BABBAGE

            
            /*

            
             * Size of malloc() pool

            
             */

            
            #define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)


            #define CONFIG_BOARD_LATE_INIT


            /*

            
             * Hardware drivers

            
             */

            
            #define CONFIG_FSL_IIM

            
            #define CONFIG_CMD_FUSE


            #define CONFIG_MXC_UART

            
            #define CONFIG_MXC_UART_BASE	UART1_BASE

            
            #define CONFIG_MXC_GPIO


            /*

            
             * SPI Configs

            
             * */

            
            #define CONFIG_CMD_SPI


            #define CONFIG_MXC_SPI


            /* PMIC Controller */

            
            #define CONFIG_POWER

            
            #define CONFIG_POWER_SPI

            
            #define CONFIG_POWER_FSL

            
            #define CONFIG_FSL_PMIC_BUS	0

            
            #define CONFIG_FSL_PMIC_CS	0

            
            #define CONFIG_FSL_PMIC_CLK	2500000

            
            #define CONFIG_FSL_PMIC_MODE	(SPI_MODE_0 | SPI_CS_HIGH)

            
            #define CONFIG_FSL_PMIC_BITLEN	32

            
            #define CONFIG_RTC_MC13XXX


            /*

            
             * MMC Configs

            
             * */

            
            #define CONFIG_FSL_ESDHC

            
            #define CONFIG_SYS_FSL_ESDHC_ADDR	MMC_SDHC1_BASE_ADDR

            
            #define CONFIG_SYS_FSL_ESDHC_NUM	2


            #define CONFIG_MMC


            #define CONFIG_CMD_MMC

            
            #define CONFIG_GENERIC_MMC

            
            #define CONFIG_CMD_FAT

            
            #define CONFIG_DOS_PARTITION


            /*

            
             * Eth Configs

            
             */

            
            #define CONFIG_MII


            #define CONFIG_FEC_MXC

            
            #define IMX_FEC_BASE	FEC_BASE_ADDR

            
            #define CONFIG_FEC_MXC_PHYADDR	0x1F


            #define CONFIG_CMD_PING

            
            #define CONFIG_CMD_DHCP

            
            #define CONFIG_CMD_MII

            
            #define CONFIG_CMD_NET


            /* USB Configs */

            
            #define CONFIG_CMD_USB

            
            #define CONFIG_CMD_FAT

            
            #define CONFIG_USB_EHCI

            
            #define CONFIG_USB_EHCI_MX5

            
            #define CONFIG_USB_STORAGE

            
            #define CONFIG_USB_HOST_ETHER

            
            #define CONFIG_USB_ETHER_ASIX

            
            #define CONFIG_USB_ETHER_SMSC95XX

            
            #define CONFIG_MXC_USB_PORT	1

            
            #define CONFIG_MXC_USB_PORTSC	PORT_PTS_ULPI

            
            #define CONFIG_MXC_USB_FLAGS	MXC_EHCI_POWER_PINS_ENABLED


            /* Framebuffer and LCD */

            
            #define CONFIG_PREBOOT

            
            #define CONFIG_VIDEO

            
            #define CONFIG_VIDEO_IPUV3

            
            #define CONFIG_CFB_CONSOLE

            
            #define CONFIG_VGA_AS_SINGLE_DEVICE

            
            #define CONFIG_SYS_CONSOLE_IS_IN_ENV

            
            #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE

            
            #define CONFIG_VIDEO_BMP_RLE8

            
            #define CONFIG_SPLASH_SCREEN

            
            #define CONFIG_BMP_16BPP

            
            #define CONFIG_VIDEO_LOGO

            
            #define CONFIG_IPUV3_CLK	133000000


            /* allow to overwrite serial and ethaddr */

            
            #define CONFIG_ENV_OVERWRITE

            
            #define CONFIG_CONS_INDEX		1

            
            #define CONFIG_BAUDRATE			115200


            /***********************************************************

            
             * Command definition

            
             ***********************************************************/


            #include <config_cmd_default.h>

            
            #define CONFIG_CMD_BOOTZ

            
            #undef CONFIG_CMD_IMLS


            #define CONFIG_CMD_DATE


            #define CONFIG_BOOTDELAY	1


            #define CONFIG_ETHPRIME		"FEC0"


            #define CONFIG_LOADADDR		0x92000000	/* loadaddr env var */


            #define CONFIG_EXTRA_ENV_SETTINGS \

            
            	"script=boot.scr\0" \

            
            	"image=zImage\0" \

            
            	"fdt_file=imx51-babbage.dtb\0" \

            
            	"fdt_addr=0x91000000\0" \

            
            	"boot_fdt=try\0" \

            
            	"ip_dyn=yes\0" \

            
            	"mmcdev=0\0" \

            
            	"mmcpart=1\0" \

            
            	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \

            
            	"mmcargs=setenv bootargs console=ttymxc0,${baudrate} " \

            
            		"root=${mmcroot}\0" \

            
            	"loadbootscript=" \

            
            		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \

            
            	"bootscript=echo Running bootscript from mmc ...; " \

            
            		"source\0" \

            
            	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \

            
            	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \

            
            	"mmcboot=echo Booting from mmc ...; " \

            
            		"run mmcargs; " \

            
            		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \

            
            			"if run loadfdt; then " \

            
            				"bootz ${loadaddr} - ${fdt_addr}; " \

            
            			"else " \

            
            				"if test ${boot_fdt} = try; then " \

            
            					"bootz; " \

            
            				"else " \

            
            					"echo WARN: Cannot load the DT; " \

            
            				"fi; " \

            
            			"fi; " \

            
            		"else " \

            
            			"bootz; " \

            
            		"fi;\0" \

            
            	"netargs=setenv bootargs console=ttymxc0,${baudrate} " \

            
            		"root=/dev/nfs " \

            
            		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \

            
            	"netboot=echo Booting from net ...; " \

            
            		"run netargs; " \

            
            		"if test ${ip_dyn} = yes; then " \

            
            			"setenv get_cmd dhcp; " \

            
            		"else " \

            
            			"setenv get_cmd tftp; " \

            
            		"fi; " \

            
            		"${get_cmd} ${image}; " \

            
            		"if test ${boot_fdt} = yes ||  test ${boot_fdt} = try; then " \

            
            			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \

            
            				"bootz ${loadaddr} - ${fdt_addr}; " \

            
            			"else " \

            
            				"if test ${boot_fdt} = try; then " \

            
            					"bootz; " \

            
            				"else " \

            
            					"echo ERROR: Cannot load the DT; " \

            
            					"exit; " \

            
            				"fi; " \

            
            			"fi; " \

            
            		"else " \

            
            			"bootz; " \

            
            		"fi;\0"


            #define CONFIG_BOOTCOMMAND \

            
            	"mmc dev ${mmcdev}; if mmc rescan; then " \

            
            		"if run loadbootscript; then " \

            
            			"run bootscript; " \

            
            		"else " \

            
            			"if run loadimage; then " \

            
            				"run mmcboot; " \

            
            			"else run netboot; " \

            
            			"fi; " \

            
            		"fi; " \

            
            	"else run netboot; fi"


            #define CONFIG_ARP_TIMEOUT	200UL


            /*

            
             * Miscellaneous configurable options

            
             */

            
            #define CONFIG_SYS_LONGHELP		/* undef to save memory */

            
            #define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */

            
            #define CONFIG_AUTO_COMPLETE

            
            #define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */

            
            /* Print Buffer Size */

            
            #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)

            
            #define CONFIG_SYS_MAXARGS	16	/* max number of command args */

            
            #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */


            #define CONFIG_SYS_MEMTEST_START       0x90000000

            
            #define CONFIG_SYS_MEMTEST_END         0x90010000


            #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR


            #define CONFIG_CMDLINE_EDITING


            /*-----------------------------------------------------------------------

            
             * Physical Memory Map

            
             */

            
            #define CONFIG_NR_DRAM_BANKS	1

            
            #define PHYS_SDRAM_1		CSD0_BASE_ADDR

            
            #define PHYS_SDRAM_1_SIZE	(512 * 1024 * 1024)


            #define CONFIG_SYS_SDRAM_BASE		(PHYS_SDRAM_1)

            
            #define CONFIG_SYS_INIT_RAM_ADDR	(IRAM_BASE_ADDR)

            
            #define CONFIG_SYS_INIT_RAM_SIZE	(IRAM_SIZE)


            #define CONFIG_BOARD_EARLY_INIT_F


            #define CONFIG_SYS_INIT_SP_OFFSET \

            
            	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)

            
            #define CONFIG_SYS_INIT_SP_ADDR \

            
            	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)


            #define CONFIG_SYS_DDR_CLKSEL	0

            
            #define CONFIG_SYS_CLKTL_CBCDR	0x59E35100

            
            #define CONFIG_SYS_MAIN_PWR_ON


            /*-----------------------------------------------------------------------

            
             * FLASH and environment organization

            
             */

            
            #define CONFIG_SYS_NO_FLASH


            #define CONFIG_ENV_OFFSET      (6 * 64 * 1024)

            
            #define CONFIG_ENV_SIZE        (8 * 1024)

            
            #define CONFIG_ENV_IS_IN_MMC

            
            #define CONFIG_SYS_MMC_ENV_DEV 0


            #endif
	/*
	* Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
	*
	* (C) Copyright 2009 Freescale Semiconductor, Inc.
	*
	* Configuration settings for the MX51EVK Board
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	/* High Level Configuration Options */

	#define CONFIG_MX51 /* in a mx51 */

	#define CONFIG_DISPLAY_CPUINFO
	#define CONFIG_DISPLAY_BOARDINFO

	#define CONFIG_SYS_TEXT_BASE 0x97800000

	#include <asm/arch/imx-regs.h>

	#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
	#define CONFIG_SETUP_MEMORY_TAGS
	#define CONFIG_INITRD_TAG
	#define CONFIG_REVISION_TAG
	#define CONFIG_SYS_GENERIC_BOARD

	#define CONFIG_OF_LIBFDT

	#define CONFIG_MACH_TYPE MACH_TYPE_MX51_BABBAGE
	/*
	* Size of malloc() pool
	*/
	#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)

	#define CONFIG_BOARD_LATE_INIT

	/*
	* Hardware drivers
	*/
	#define CONFIG_FSL_IIM
	#define CONFIG_CMD_FUSE

	#define CONFIG_MXC_UART
	#define CONFIG_MXC_UART_BASE UART1_BASE
	#define CONFIG_MXC_GPIO

	/*
	* SPI Configs
	* */
	#define CONFIG_CMD_SPI

	#define CONFIG_MXC_SPI

	/* PMIC Controller */
	#define CONFIG_POWER
	#define CONFIG_POWER_SPI
	#define CONFIG_POWER_FSL
	#define CONFIG_FSL_PMIC_BUS 0
	#define CONFIG_FSL_PMIC_CS 0
	#define CONFIG_FSL_PMIC_CLK 2500000
	#define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 \| SPI_CS_HIGH)
	#define CONFIG_FSL_PMIC_BITLEN 32
	#define CONFIG_RTC_MC13XXX

	/*
	* MMC Configs
	* */
	#define CONFIG_FSL_ESDHC
	#define CONFIG_SYS_FSL_ESDHC_ADDR MMC_SDHC1_BASE_ADDR
	#define CONFIG_SYS_FSL_ESDHC_NUM 2

	#define CONFIG_MMC

	#define CONFIG_CMD_MMC
	#define CONFIG_GENERIC_MMC
	#define CONFIG_CMD_FAT
	#define CONFIG_DOS_PARTITION

	/*
	* Eth Configs
	*/
	#define CONFIG_MII

	#define CONFIG_FEC_MXC
	#define IMX_FEC_BASE FEC_BASE_ADDR
	#define CONFIG_FEC_MXC_PHYADDR 0x1F

	#define CONFIG_CMD_PING
	#define CONFIG_CMD_DHCP
	#define CONFIG_CMD_MII
	#define CONFIG_CMD_NET

	/* USB Configs */
	#define CONFIG_CMD_USB
	#define CONFIG_CMD_FAT
	#define CONFIG_USB_EHCI
	#define CONFIG_USB_EHCI_MX5
	#define CONFIG_USB_STORAGE
	#define CONFIG_USB_HOST_ETHER
	#define CONFIG_USB_ETHER_ASIX
	#define CONFIG_USB_ETHER_SMSC95XX
	#define CONFIG_MXC_USB_PORT 1
	#define CONFIG_MXC_USB_PORTSC PORT_PTS_ULPI
	#define CONFIG_MXC_USB_FLAGS MXC_EHCI_POWER_PINS_ENABLED

	/* Framebuffer and LCD */
	#define CONFIG_PREBOOT
	#define CONFIG_VIDEO
	#define CONFIG_VIDEO_IPUV3
	#define CONFIG_CFB_CONSOLE
	#define CONFIG_VGA_AS_SINGLE_DEVICE
	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
	#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
	#define CONFIG_VIDEO_BMP_RLE8
	#define CONFIG_SPLASH_SCREEN
	#define CONFIG_BMP_16BPP
	#define CONFIG_VIDEO_LOGO
	#define CONFIG_IPUV3_CLK 133000000

	/* allow to overwrite serial and ethaddr */
	#define CONFIG_ENV_OVERWRITE
	#define CONFIG_CONS_INDEX 1
	#define CONFIG_BAUDRATE 115200

	/***********************************************************
	* Command definition
	***********************************************************/

	#include <config_cmd_default.h>
	#define CONFIG_CMD_BOOTZ
	#undef CONFIG_CMD_IMLS

	#define CONFIG_CMD_DATE

	#define CONFIG_BOOTDELAY 1

	#define CONFIG_ETHPRIME "FEC0"

	#define CONFIG_LOADADDR 0x92000000 /* loadaddr env var */

	#define CONFIG_EXTRA_ENV_SETTINGS \
	"script=boot.scr\0" \
	"image=zImage\0" \
	"fdt_file=imx51-babbage.dtb\0" \
	"fdt_addr=0x91000000\0" \
	"boot_fdt=try\0" \
	"ip_dyn=yes\0" \
	"mmcdev=0\0" \
	"mmcpart=1\0" \
	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
	"mmcargs=setenv bootargs console=ttymxc0,${baudrate} " \
	"root=${mmcroot}\0" \
	"loadbootscript=" \
	"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
	"source\0" \
	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	"mmcboot=echo Booting from mmc ...; " \
	"run mmcargs; " \
	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	"if run loadfdt; then " \
	"bootz ${loadaddr} - ${fdt_addr}; " \
	"else " \
	"if test ${boot_fdt} = try; then " \
	"bootz; " \
	"else " \
	"echo WARN: Cannot load the DT; " \
	"fi; " \
	"fi; " \
	"else " \
	"bootz; " \
	"fi;\0" \
	"netargs=setenv bootargs console=ttymxc0,${baudrate} " \
	"root=/dev/nfs " \
	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	"netboot=echo Booting from net ...; " \
	"run netargs; " \
	"if test ${ip_dyn} = yes; then " \
	"setenv get_cmd dhcp; " \
	"else " \
	"setenv get_cmd tftp; " \
	"fi; " \
	"${get_cmd} ${image}; " \
	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
	"bootz ${loadaddr} - ${fdt_addr}; " \
	"else " \
	"if test ${boot_fdt} = try; then " \
	"bootz; " \
	"else " \
	"echo ERROR: Cannot load the DT; " \
	"exit; " \
	"fi; " \
	"fi; " \
	"else " \
	"bootz; " \
	"fi;\0"

	#define CONFIG_BOOTCOMMAND \
	"mmc dev ${mmcdev}; if mmc rescan; then " \
	"if run loadbootscript; then " \
	"run bootscript; " \
	"else " \
	"if run loadimage; then " \
	"run mmcboot; " \
	"else run netboot; " \
	"fi; " \
	"fi; " \
	"else run netboot; fi"

	#define CONFIG_ARP_TIMEOUT 200UL

	/*
	* Miscellaneous configurable options
	*/
	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
	#define CONFIG_AUTO_COMPLETE
	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	/* Print Buffer Size */
	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

	#define CONFIG_SYS_MEMTEST_START 0x90000000
	#define CONFIG_SYS_MEMTEST_END 0x90010000

	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR

	#define CONFIG_CMDLINE_EDITING

	/*-----------------------------------------------------------------------
	* Physical Memory Map
	*/
	#define CONFIG_NR_DRAM_BANKS 1
	#define PHYS_SDRAM_1 CSD0_BASE_ADDR
	#define PHYS_SDRAM_1_SIZE (512 * 1024 * 1024)

	#define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1)
	#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR)
	#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE)

	#define CONFIG_BOARD_EARLY_INIT_F

	#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

	#define CONFIG_SYS_DDR_CLKSEL 0
	#define CONFIG_SYS_CLKTL_CBCDR 0x59E35100
	#define CONFIG_SYS_MAIN_PWR_ON

	/*-----------------------------------------------------------------------
	* FLASH and environment organization
	*/
	#define CONFIG_SYS_NO_FLASH

	#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
	#define CONFIG_ENV_SIZE (8 * 1024)
	#define CONFIG_ENV_IS_IN_MMC
	#define CONFIG_SYS_MMC_ENV_DEV 0

	#endif