|  |  | 
|  | U-Boot MARUBUN MR-SHPC-01 PCMCIA controller driver | 
|  | Last update 21/11/2007 by Nobuhiro Iwamatsu | 
|  |  | 
|  | ======================================================================================== | 
|  |  | 
|  | 0. What's this? | 
|  | This driver supports MARUBUN MR-SHPC-01. | 
|  | url: http://www.marubun.co.jp/product/semicon/devices/qgc18e0000002n2z.html | 
|  | (Sorry Japanese only.) | 
|  |  | 
|  | This chip is used with SuperH well, and adopted by the | 
|  | reference board. | 
|  | ex. * MS7750SE01 | 
|  | * MS7722SE01 | 
|  | * other | 
|  |  | 
|  | This chip doesn't support CardBus. | 
|  |  | 
|  | 1. base source code | 
|  | The code is based on sources from the Linux kernel | 
|  | ( arch/sh/kernel/cf-enabler.c ). | 
|  |  | 
|  | 2. How to use | 
|  | The options you have to specify in the config file are (with the | 
|  | value for my board as an example): | 
|  |  | 
|  | * CONFIG_MARUBUN_PCCARD | 
|  | If you want to use this device driver, should define CONFIG_MARUBUN_PCCARD. | 
|  | ex.	#define CONFIG_MARUBUN_PCCARD | 
|  |  | 
|  | * CONFIG_PCMCIA_SLOT_A | 
|  | Most devices have only one slot. You should define CONFIG_PCMCIA_SLOT_A . | 
|  | ex.	#define CONFIG_PCMCIA_SLOT_A    1 | 
|  |  | 
|  | * CONFIG_SYS_MARUBUN_MRSHPC | 
|  | This is MR-SHPC-01 PCMCIA controler base address. | 
|  | You should do the setting matched to your environment. | 
|  | ex.  #define CONFIG_SYS_MARUBUN_MRSHPC 0xb03fffe0 | 
|  | ( for MS7722SE01 environment ) | 
|  |  | 
|  | * CONFIG_SYS_MARUBUN_MW1 | 
|  | This is MR-SHPC-01 memory window base address. | 
|  | You should do the setting matched to your environment. | 
|  | ex. #define CONFIG_SYS_MARUBUN_MW1 0xb0400000 | 
|  | ( for MS7722SE01 environment ) | 
|  |  | 
|  | * CONFIG_SYS_MARUBUN_MW1 | 
|  | This is MR-SHPC-01 attribute window base address. | 
|  | You should do the setting matched to your environment. | 
|  | ex. #define CONFIG_SYS_MARUBUN_MW2 0xb0500000 | 
|  | ( for MS7722SE01 environment ) | 
|  |  | 
|  | * CONFIG_SYS_MARUBUN_MW1 | 
|  | This is MR-SHPC-01 I/O window base address. | 
|  | You should do the setting matched to your environment. | 
|  | ex. #define CONFIG_SYS_MARUBUN_IO  0xb0600000 | 
|  | ( for MS7722SE01 environment ) | 
|  |  | 
|  | 3. Other | 
|  | * Check Compact Flash only. | 
|  | * Maybe, NE2000 compatible NIC is sure to move. | 
|  |  | 
|  | Copyright (c) 2007 | 
|  | Nobuhiro Iwamatsu <iwamatsu@nigaur.org> |