|  | /* | 
|  | * (C) Copyright 2009 | 
|  | * Stefano Babic, DENX Software Engineering, sbabic@denx.de. | 
|  | * | 
|  | * (C) Copyright 2008 | 
|  | * Marvell Semiconductor <www.marvell.com> | 
|  | * Written-by: Prafulla Wadaskar <prafulla@marvell.com> | 
|  | * | 
|  | * See file CREDITS for list of people who contributed to this | 
|  | * project. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License as | 
|  | * published by the Free Software Foundation; either version 2 of | 
|  | * the License, or (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | 
|  | * MA 02111-1307 USA | 
|  | */ | 
|  |  | 
|  | /* Required to obtain the getline prototype from stdio.h */ | 
|  | #define _GNU_SOURCE | 
|  |  | 
|  | #include "mkimage.h" | 
|  | #include <image.h> | 
|  | #include "imximage.h" | 
|  |  | 
|  | /* | 
|  | * Supported commands for configuration file | 
|  | */ | 
|  | static table_entry_t imximage_cmds[] = { | 
|  | {CMD_BOOT_FROM,         "BOOT_FROM",            "boot command",	  }, | 
|  | {CMD_DATA,              "DATA",                 "Reg Write Data", }, | 
|  | {CMD_IMAGE_VERSION,     "IMAGE_VERSION",        "image version",  }, | 
|  | {-1,                    "",                     "",	          }, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Supported Boot options for configuration file | 
|  | * this is needed to set the correct flash offset | 
|  | */ | 
|  | static table_entry_t imximage_bootops[] = { | 
|  | {FLASH_OFFSET_SPI,	"spi",		"SPI Flash",	}, | 
|  | {FLASH_OFFSET_NAND,	"nand",		"NAND Flash",	}, | 
|  | {FLASH_OFFSET_SD,	"sd",		"SD Card",	}, | 
|  | {FLASH_OFFSET_ONENAND,	"onenand",	"OneNAND Flash",}, | 
|  | {-1,			"",		"Invalid",	}, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * IMXIMAGE version definition for i.MX chips | 
|  | */ | 
|  | static table_entry_t imximage_versions[] = { | 
|  | {IMXIMAGE_V1,	"",	" (i.MX25/35/51 compatible)", }, | 
|  | {IMXIMAGE_V2,	"",	" (i.MX53 compatible)",       }, | 
|  | {-1,            "",     " (Invalid)",                 }, | 
|  | }; | 
|  |  | 
|  | static struct imx_header imximage_header; | 
|  | static uint32_t imximage_version; | 
|  |  | 
|  | static set_dcd_val_t set_dcd_val; | 
|  | static set_dcd_rst_t set_dcd_rst; | 
|  | static set_imx_hdr_t set_imx_hdr; | 
|  |  | 
|  | static uint32_t get_cfg_value(char *token, char *name,  int linenr) | 
|  | { | 
|  | char *endptr; | 
|  | uint32_t value; | 
|  |  | 
|  | errno = 0; | 
|  | value = strtoul(token, &endptr, 16); | 
|  | if (errno || (token == endptr)) { | 
|  | fprintf(stderr, "Error: %s[%d] - Invalid hex data(%s)\n", | 
|  | name,  linenr, token); | 
|  | exit(EXIT_FAILURE); | 
|  | } | 
|  | return value; | 
|  | } | 
|  |  | 
|  | static uint32_t detect_imximage_version(struct imx_header *imx_hdr) | 
|  | { | 
|  | imx_header_v1_t *hdr_v1 = &imx_hdr->header.hdr_v1; | 
|  | imx_header_v2_t *hdr_v2 = &imx_hdr->header.hdr_v2; | 
|  | flash_header_v1_t *fhdr_v1 = &hdr_v1->fhdr; | 
|  | flash_header_v2_t *fhdr_v2 = &hdr_v2->fhdr; | 
|  |  | 
|  | /* Try to detect V1 */ | 
|  | if ((fhdr_v1->app_code_barker == APP_CODE_BARKER) && | 
|  | (hdr_v1->dcd_table.preamble.barker == DCD_BARKER)) | 
|  | return IMXIMAGE_V1; | 
|  |  | 
|  | /* Try to detect V2 */ | 
|  | if ((fhdr_v2->header.tag == IVT_HEADER_TAG) && | 
|  | (hdr_v2->dcd_table.header.tag == DCD_HEADER_TAG)) | 
|  | return IMXIMAGE_V2; | 
|  |  | 
|  | return IMXIMAGE_VER_INVALID; | 
|  | } | 
|  |  | 
|  | static void err_imximage_version(int version) | 
|  | { | 
|  | fprintf(stderr, | 
|  | "Error: Unsupported imximage version:%d\n", version); | 
|  |  | 
|  | exit(EXIT_FAILURE); | 
|  | } | 
|  |  | 
|  | static void set_dcd_val_v1(struct imx_header *imxhdr, char *name, int lineno, | 
|  | int fld, uint32_t value, uint32_t off) | 
|  | { | 
|  | dcd_v1_t *dcd_v1 = &imxhdr->header.hdr_v1.dcd_table; | 
|  |  | 
|  | switch (fld) { | 
|  | case CFG_REG_SIZE: | 
|  | /* Byte, halfword, word */ | 
|  | if ((value != 1) && (value != 2) && (value != 4)) { | 
|  | fprintf(stderr, "Error: %s[%d] - " | 
|  | "Invalid register size " "(%d)\n", | 
|  | name, lineno, value); | 
|  | exit(EXIT_FAILURE); | 
|  | } | 
|  | dcd_v1->addr_data[off].type = value; | 
|  | break; | 
|  | case CFG_REG_ADDRESS: | 
|  | dcd_v1->addr_data[off].addr = value; | 
|  | break; | 
|  | case CFG_REG_VALUE: | 
|  | dcd_v1->addr_data[off].value = value; | 
|  | break; | 
|  | default: | 
|  | break; | 
|  |  | 
|  | } | 
|  | } | 
|  |  | 
|  | static void set_dcd_val_v2(struct imx_header *imxhdr, char *name, int lineno, | 
|  | int fld, uint32_t value, uint32_t off) | 
|  | { | 
|  | dcd_v2_t *dcd_v2 = &imxhdr->header.hdr_v2.dcd_table; | 
|  |  | 
|  | switch (fld) { | 
|  | case CFG_REG_ADDRESS: | 
|  | dcd_v2->addr_data[off].addr = cpu_to_be32(value); | 
|  | break; | 
|  | case CFG_REG_VALUE: | 
|  | dcd_v2->addr_data[off].value = cpu_to_be32(value); | 
|  | break; | 
|  | default: | 
|  | break; | 
|  |  | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Complete setting up the rest field of DCD of V1 | 
|  | * such as barker code and DCD data length. | 
|  | */ | 
|  | static void set_dcd_rst_v1(struct imx_header *imxhdr, uint32_t dcd_len, | 
|  | char *name, int lineno) | 
|  | { | 
|  | dcd_v1_t *dcd_v1 = &imxhdr->header.hdr_v1.dcd_table; | 
|  |  | 
|  | if (dcd_len > MAX_HW_CFG_SIZE_V1) { | 
|  | fprintf(stderr, "Error: %s[%d] -" | 
|  | "DCD table exceeds maximum size(%d)\n", | 
|  | name, lineno, MAX_HW_CFG_SIZE_V1); | 
|  | exit(EXIT_FAILURE); | 
|  | } | 
|  |  | 
|  | dcd_v1->preamble.barker = DCD_BARKER; | 
|  | dcd_v1->preamble.length = dcd_len * sizeof(dcd_type_addr_data_t); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Complete setting up the reset field of DCD of V2 | 
|  | * such as DCD tag, version, length, etc. | 
|  | */ | 
|  | static void set_dcd_rst_v2(struct imx_header *imxhdr, uint32_t dcd_len, | 
|  | char *name, int lineno) | 
|  | { | 
|  | dcd_v2_t *dcd_v2 = &imxhdr->header.hdr_v2.dcd_table; | 
|  |  | 
|  | if (dcd_len > MAX_HW_CFG_SIZE_V2) { | 
|  | fprintf(stderr, "Error: %s[%d] -" | 
|  | "DCD table exceeds maximum size(%d)\n", | 
|  | name, lineno, MAX_HW_CFG_SIZE_V2); | 
|  | exit(EXIT_FAILURE); | 
|  | } | 
|  |  | 
|  | dcd_v2->header.tag = DCD_HEADER_TAG; | 
|  | dcd_v2->header.length = cpu_to_be16( | 
|  | dcd_len * sizeof(dcd_addr_data_t) + 8); | 
|  | dcd_v2->header.version = DCD_VERSION; | 
|  | dcd_v2->write_dcd_command.tag = DCD_COMMAND_TAG; | 
|  | dcd_v2->write_dcd_command.length = cpu_to_be16( | 
|  | dcd_len * sizeof(dcd_addr_data_t) + 4); | 
|  | dcd_v2->write_dcd_command.param = DCD_COMMAND_PARAM; | 
|  | } | 
|  |  | 
|  | static void set_imx_hdr_v1(struct imx_header *imxhdr, uint32_t dcd_len, | 
|  | struct stat *sbuf, | 
|  | struct mkimage_params *params) | 
|  | { | 
|  | imx_header_v1_t *hdr_v1 = &imxhdr->header.hdr_v1; | 
|  | flash_header_v1_t *fhdr_v1 = &hdr_v1->fhdr; | 
|  | dcd_v1_t *dcd_v1 = &hdr_v1->dcd_table; | 
|  | uint32_t base_offset; | 
|  |  | 
|  | /* Set default offset */ | 
|  | imxhdr->flash_offset = FLASH_OFFSET_STANDARD; | 
|  |  | 
|  | /* Set magic number */ | 
|  | fhdr_v1->app_code_barker = APP_CODE_BARKER; | 
|  |  | 
|  | fhdr_v1->app_dest_ptr = params->addr; | 
|  | fhdr_v1->app_dest_ptr = params->ep - imxhdr->flash_offset - | 
|  | sizeof(struct imx_header); | 
|  | fhdr_v1->app_code_jump_vector = params->ep; | 
|  |  | 
|  | base_offset = fhdr_v1->app_dest_ptr + imxhdr->flash_offset ; | 
|  | fhdr_v1->dcd_ptr_ptr = | 
|  | (uint32_t) (offsetof(flash_header_v1_t, dcd_ptr) - | 
|  | offsetof(flash_header_v1_t, app_code_jump_vector) + | 
|  | base_offset); | 
|  |  | 
|  | fhdr_v1->dcd_ptr = base_offset + | 
|  | offsetof(imx_header_v1_t, dcd_table); | 
|  |  | 
|  | /* The external flash header must be at the end of the DCD table */ | 
|  | dcd_v1->addr_data[dcd_len].type = sbuf->st_size + | 
|  | imxhdr->flash_offset + | 
|  | sizeof(struct imx_header); | 
|  |  | 
|  | /* Security feature are not supported */ | 
|  | fhdr_v1->app_code_csf = 0; | 
|  | fhdr_v1->super_root_key = 0; | 
|  | } | 
|  |  | 
|  | static void set_imx_hdr_v2(struct imx_header *imxhdr, uint32_t dcd_len, | 
|  | struct stat *sbuf, | 
|  | struct mkimage_params *params) | 
|  | { | 
|  | imx_header_v2_t *hdr_v2 = &imxhdr->header.hdr_v2; | 
|  | flash_header_v2_t *fhdr_v2 = &hdr_v2->fhdr; | 
|  |  | 
|  | /* Set default offset */ | 
|  | imxhdr->flash_offset = FLASH_OFFSET_STANDARD; | 
|  |  | 
|  | /* Set magic number */ | 
|  | fhdr_v2->header.tag = IVT_HEADER_TAG; /* 0xD1 */ | 
|  | fhdr_v2->header.length = cpu_to_be16(sizeof(flash_header_v2_t)); | 
|  | fhdr_v2->header.version = IVT_VERSION; /* 0x40 */ | 
|  |  | 
|  | fhdr_v2->entry = params->ep; | 
|  | fhdr_v2->reserved1 = fhdr_v2->reserved2 = 0; | 
|  | fhdr_v2->self = params->ep - sizeof(struct imx_header); | 
|  |  | 
|  | fhdr_v2->dcd_ptr = fhdr_v2->self + | 
|  | offsetof(imx_header_v2_t, dcd_table); | 
|  |  | 
|  | fhdr_v2->boot_data_ptr = fhdr_v2->self + | 
|  | offsetof(imx_header_v2_t, boot_data); | 
|  |  | 
|  | hdr_v2->boot_data.start = fhdr_v2->self - imxhdr->flash_offset; | 
|  | hdr_v2->boot_data.size = sbuf->st_size + | 
|  | imxhdr->flash_offset + | 
|  | sizeof(struct imx_header); | 
|  |  | 
|  | /* Security feature are not supported */ | 
|  | fhdr_v2->csf = 0; | 
|  | } | 
|  |  | 
|  | static void set_hdr_func(struct imx_header *imxhdr) | 
|  | { | 
|  | switch (imximage_version) { | 
|  | case IMXIMAGE_V1: | 
|  | set_dcd_val = set_dcd_val_v1; | 
|  | set_dcd_rst = set_dcd_rst_v1; | 
|  | set_imx_hdr = set_imx_hdr_v1; | 
|  | break; | 
|  | case IMXIMAGE_V2: | 
|  | set_dcd_val = set_dcd_val_v2; | 
|  | set_dcd_rst = set_dcd_rst_v2; | 
|  | set_imx_hdr = set_imx_hdr_v2; | 
|  | break; | 
|  | default: | 
|  | err_imximage_version(imximage_version); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void print_hdr_v1(struct imx_header *imx_hdr) | 
|  | { | 
|  | imx_header_v1_t *hdr_v1 = &imx_hdr->header.hdr_v1; | 
|  | flash_header_v1_t *fhdr_v1 = &hdr_v1->fhdr; | 
|  | dcd_v1_t *dcd_v1 = &hdr_v1->dcd_table; | 
|  | uint32_t size, length, ver; | 
|  |  | 
|  | size = dcd_v1->preamble.length; | 
|  | if (size > (MAX_HW_CFG_SIZE_V1 * sizeof(dcd_type_addr_data_t))) { | 
|  | fprintf(stderr, | 
|  | "Error: Image corrupt DCD size %d exceed maximum %d\n", | 
|  | (uint32_t)(size / sizeof(dcd_type_addr_data_t)), | 
|  | MAX_HW_CFG_SIZE_V1); | 
|  | exit(EXIT_FAILURE); | 
|  | } | 
|  |  | 
|  | length = dcd_v1->preamble.length / sizeof(dcd_type_addr_data_t); | 
|  | ver = detect_imximage_version(imx_hdr); | 
|  |  | 
|  | printf("Image Type:   Freescale IMX Boot Image\n"); | 
|  | printf("Image Ver:    %x", ver); | 
|  | printf("%s\n", get_table_entry_name(imximage_versions, NULL, ver)); | 
|  | printf("Data Size:    "); | 
|  | genimg_print_size(dcd_v1->addr_data[length].type); | 
|  | printf("Load Address: %08x\n", (uint32_t)fhdr_v1->app_dest_ptr); | 
|  | printf("Entry Point:  %08x\n", (uint32_t)fhdr_v1->app_code_jump_vector); | 
|  | } | 
|  |  | 
|  | static void print_hdr_v2(struct imx_header *imx_hdr) | 
|  | { | 
|  | imx_header_v2_t *hdr_v2 = &imx_hdr->header.hdr_v2; | 
|  | flash_header_v2_t *fhdr_v2 = &hdr_v2->fhdr; | 
|  | dcd_v2_t *dcd_v2 = &hdr_v2->dcd_table; | 
|  | uint32_t size, version; | 
|  |  | 
|  | size = be16_to_cpu(dcd_v2->header.length) - 8; | 
|  | if (size > (MAX_HW_CFG_SIZE_V2 * sizeof(dcd_addr_data_t))) { | 
|  | fprintf(stderr, | 
|  | "Error: Image corrupt DCD size %d exceed maximum %d\n", | 
|  | (uint32_t)(size / sizeof(dcd_addr_data_t)), | 
|  | MAX_HW_CFG_SIZE_V2); | 
|  | exit(EXIT_FAILURE); | 
|  | } | 
|  |  | 
|  | version = detect_imximage_version(imx_hdr); | 
|  |  | 
|  | printf("Image Type:   Freescale IMX Boot Image\n"); | 
|  | printf("Image Ver:    %x", version); | 
|  | printf("%s\n", get_table_entry_name(imximage_versions, NULL, version)); | 
|  | printf("Data Size:    "); | 
|  | genimg_print_size(hdr_v2->boot_data.size); | 
|  | printf("Load Address: %08x\n", (uint32_t)fhdr_v2->boot_data_ptr); | 
|  | printf("Entry Point:  %08x\n", (uint32_t)fhdr_v2->entry); | 
|  | } | 
|  |  | 
|  | static void parse_cfg_cmd(struct imx_header *imxhdr, int32_t cmd, char *token, | 
|  | char *name, int lineno, int fld, int dcd_len) | 
|  | { | 
|  | int value; | 
|  | static int cmd_ver_first = ~0; | 
|  |  | 
|  | switch (cmd) { | 
|  | case CMD_IMAGE_VERSION: | 
|  | imximage_version = get_cfg_value(token, name, lineno); | 
|  | if (cmd_ver_first == 0) { | 
|  | fprintf(stderr, "Error: %s[%d] - IMAGE_VERSION " | 
|  | "command need be the first before other " | 
|  | "valid command in the file\n", name, lineno); | 
|  | exit(EXIT_FAILURE); | 
|  | } | 
|  | cmd_ver_first = 1; | 
|  | set_hdr_func(imxhdr); | 
|  | break; | 
|  | case CMD_BOOT_FROM: | 
|  | imxhdr->flash_offset = get_table_entry_id(imximage_bootops, | 
|  | "imximage boot option", token); | 
|  | if (imxhdr->flash_offset == -1) { | 
|  | fprintf(stderr, "Error: %s[%d] -Invalid boot device" | 
|  | "(%s)\n", name, lineno, token); | 
|  | exit(EXIT_FAILURE); | 
|  | } | 
|  | if (unlikely(cmd_ver_first != 1)) | 
|  | cmd_ver_first = 0; | 
|  | break; | 
|  | case CMD_DATA: | 
|  | value = get_cfg_value(token, name, lineno); | 
|  | (*set_dcd_val)(imxhdr, name, lineno, fld, value, dcd_len); | 
|  | if (unlikely(cmd_ver_first != 1)) | 
|  | cmd_ver_first = 0; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void parse_cfg_fld(struct imx_header *imxhdr, int32_t *cmd, | 
|  | char *token, char *name, int lineno, int fld, int *dcd_len) | 
|  | { | 
|  | int value; | 
|  |  | 
|  | switch (fld) { | 
|  | case CFG_COMMAND: | 
|  | *cmd = get_table_entry_id(imximage_cmds, | 
|  | "imximage commands", token); | 
|  | if (*cmd < 0) { | 
|  | fprintf(stderr, "Error: %s[%d] - Invalid command" | 
|  | "(%s)\n", name, lineno, token); | 
|  | exit(EXIT_FAILURE); | 
|  | } | 
|  | break; | 
|  | case CFG_REG_SIZE: | 
|  | parse_cfg_cmd(imxhdr, *cmd, token, name, lineno, fld, *dcd_len); | 
|  | break; | 
|  | case CFG_REG_ADDRESS: | 
|  | case CFG_REG_VALUE: | 
|  | if (*cmd != CMD_DATA) | 
|  | return; | 
|  |  | 
|  | value = get_cfg_value(token, name, lineno); | 
|  | (*set_dcd_val)(imxhdr, name, lineno, fld, value, *dcd_len); | 
|  |  | 
|  | if (fld == CFG_REG_VALUE) | 
|  | (*dcd_len)++; | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | } | 
|  | static uint32_t parse_cfg_file(struct imx_header *imxhdr, char *name) | 
|  | { | 
|  | FILE *fd = NULL; | 
|  | char *line = NULL; | 
|  | char *token, *saveptr1, *saveptr2; | 
|  | int lineno = 0; | 
|  | int fld; | 
|  | size_t len; | 
|  | int dcd_len = 0; | 
|  | int32_t cmd; | 
|  |  | 
|  | fd = fopen(name, "r"); | 
|  | if (fd == 0) { | 
|  | fprintf(stderr, "Error: %s - Can't open DCD file\n", name); | 
|  | exit(EXIT_FAILURE); | 
|  | } | 
|  |  | 
|  | /* Very simple parsing, line starting with # are comments | 
|  | * and are dropped | 
|  | */ | 
|  | while ((getline(&line, &len, fd)) > 0) { | 
|  | lineno++; | 
|  |  | 
|  | token = strtok_r(line, "\r\n", &saveptr1); | 
|  | if (token == NULL) | 
|  | continue; | 
|  |  | 
|  | /* Check inside the single line */ | 
|  | for (fld = CFG_COMMAND, cmd = CMD_INVALID, | 
|  | line = token; ; line = NULL, fld++) { | 
|  | token = strtok_r(line, " \t", &saveptr2); | 
|  | if (token == NULL) | 
|  | break; | 
|  |  | 
|  | /* Drop all text starting with '#' as comments */ | 
|  | if (token[0] == '#') | 
|  | break; | 
|  |  | 
|  | parse_cfg_fld(imxhdr, &cmd, token, name, | 
|  | lineno, fld, &dcd_len); | 
|  | } | 
|  |  | 
|  | } | 
|  |  | 
|  | (*set_dcd_rst)(imxhdr, dcd_len, name, lineno); | 
|  | fclose(fd); | 
|  |  | 
|  | return dcd_len; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int imximage_check_image_types(uint8_t type) | 
|  | { | 
|  | if (type == IH_TYPE_IMXIMAGE) | 
|  | return EXIT_SUCCESS; | 
|  | else | 
|  | return EXIT_FAILURE; | 
|  | } | 
|  |  | 
|  | static int imximage_verify_header(unsigned char *ptr, int image_size, | 
|  | struct mkimage_params *params) | 
|  | { | 
|  | struct imx_header *imx_hdr = (struct imx_header *) ptr; | 
|  |  | 
|  | if (detect_imximage_version(imx_hdr) == IMXIMAGE_VER_INVALID) | 
|  | return -FDT_ERR_BADSTRUCTURE; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void imximage_print_header(const void *ptr) | 
|  | { | 
|  | struct imx_header *imx_hdr = (struct imx_header *) ptr; | 
|  | uint32_t version = detect_imximage_version(imx_hdr); | 
|  |  | 
|  | switch (version) { | 
|  | case IMXIMAGE_V1: | 
|  | print_hdr_v1(imx_hdr); | 
|  | break; | 
|  | case IMXIMAGE_V2: | 
|  | print_hdr_v2(imx_hdr); | 
|  | break; | 
|  | default: | 
|  | err_imximage_version(version); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void imximage_set_header(void *ptr, struct stat *sbuf, int ifd, | 
|  | struct mkimage_params *params) | 
|  | { | 
|  | struct imx_header *imxhdr = (struct imx_header *)ptr; | 
|  | uint32_t dcd_len; | 
|  |  | 
|  | /* | 
|  | * In order to not change the old imx cfg file | 
|  | * by adding VERSION command into it, here need | 
|  | * set up function ptr group to V1 by default. | 
|  | */ | 
|  | imximage_version = IMXIMAGE_V1; | 
|  | set_hdr_func(imxhdr); | 
|  |  | 
|  | /* Parse dcd configuration file */ | 
|  | dcd_len = parse_cfg_file(imxhdr, params->imagename); | 
|  |  | 
|  | /* Set the imx header */ | 
|  | (*set_imx_hdr)(imxhdr, dcd_len, sbuf, params); | 
|  | } | 
|  |  | 
|  | int imximage_check_params(struct mkimage_params *params) | 
|  | { | 
|  | if (!params) | 
|  | return CFG_INVALID; | 
|  | if (!strlen(params->imagename)) { | 
|  | fprintf(stderr, "Error: %s - Configuration file not specified, " | 
|  | "it is needed for imximage generation\n", | 
|  | params->cmdname); | 
|  | return CFG_INVALID; | 
|  | } | 
|  | /* | 
|  | * Check parameters: | 
|  | * XIP is not allowed and verify that incompatible | 
|  | * parameters are not sent at the same time | 
|  | * For example, if list is required a data image must not be provided | 
|  | */ | 
|  | return	(params->dflag && (params->fflag || params->lflag)) || | 
|  | (params->fflag && (params->dflag || params->lflag)) || | 
|  | (params->lflag && (params->dflag || params->fflag)) || | 
|  | (params->xflag) || !(strlen(params->imagename)); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * imximage parameters | 
|  | */ | 
|  | static struct image_type_params imximage_params = { | 
|  | .name		= "Freescale i.MX 5x Boot Image support", | 
|  | .header_size	= sizeof(struct imx_header), | 
|  | .hdr		= (void *)&imximage_header, | 
|  | .check_image_type = imximage_check_image_types, | 
|  | .verify_header	= imximage_verify_header, | 
|  | .print_header	= imximage_print_header, | 
|  | .set_header	= imximage_set_header, | 
|  | .check_params	= imximage_check_params, | 
|  | }; | 
|  |  | 
|  | void init_imx_image_type(void) | 
|  | { | 
|  | mkimage_register(&imximage_params); | 
|  | } |