include/configs/ap325rxa.h - u-boot - Git at Google

 /*
  * Configuation settings for the Renesas Solutions AP-325RXA board
  *
  * Copyright (C) 2008 Renesas Solutions Corp.
  * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 #ifndef __AP325RXA_H
 #define __AP325RXA_H

 #undef DEBUG
 #define CONFIG_SH		1
 #define CONFIG_SH4		1
 #define CONFIG_CPU_SH7723	1
 #define CONFIG_AP325RXA	1

 #define CONFIG_CMD_LOADB
 #define CONFIG_CMD_LOADS
 #define CONFIG_CMD_FLASH
 #define CONFIG_CMD_MEMORY
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_SDRAM
 #define CONFIG_CMD_SAVEENV
 #define CONFIG_CMD_IDE
 #define CONFIG_CMD_EXT2
 #define CONFIG_DOS_PARTITION

 #define CONFIG_BAUDRATE		38400
 #define CONFIG_BOOTDELAY	3
 #define CONFIG_BOOTARGS		"console=ttySC2,38400"

 #define CONFIG_VERSION_VARIABLE
 #undef  CONFIG_SHOW_BOOT_PROGRESS

 /* SMC9118 */
 #define CONFIG_NET_MULTI
 #define CONFIG_SMC911X 1
 #define CONFIG_SMC911X_32_BIT 1
 #define CONFIG_SMC911X_BASE 0xB6080000

 /* MEMORY */
 #define AP325RXA_SDRAM_BASE		(0x88000000)
 #define AP325RXA_FLASH_BASE_1		(0xA0000000)
 #define AP325RXA_FLASH_BANK_SIZE	(128 * 1024 * 1024)

 /* undef to save memory	*/
 #define CONFIG_SYS_LONGHELP
 /* Monitor Command Prompt */
 #define CONFIG_SYS_PROMPT		"=> "
 /* Buffer size for input from the Console */
 #define CONFIG_SYS_CBSIZE		256
 /* Buffer size for Console output */
 #define CONFIG_SYS_PBSIZE		256
 /* max args accepted for monitor commands */
 #define CONFIG_SYS_MAXARGS		16
 /* Buffer size for Boot Arguments passed to kernel */
 #define CONFIG_SYS_BARGSIZE	512
 /* List of legal baudrate settings for this board */
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 38400 }

 /* SCIF */
 #define CONFIG_SCIF_CONSOLE 1
 #define CONFIG_SCIF_A		1 /* SH7723 has SCIF and SCIFA */
 #define CONFIG_CONS_SCIF5	1

 /* Suppress display of console information at boot */
 #undef  CONFIG_SYS_CONSOLE_INFO_QUIET
 #undef  CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 #undef  CONFIG_SYS_CONSOLE_ENV_OVERWRITE

 #define CONFIG_SYS_MEMTEST_START	(AP325RXA_SDRAM_BASE)
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024))

 /* Enable alternate, more extensive, memory test */
 #undef  CONFIG_SYS_ALT_MEMTEST
 /* Scratch address used by the alternate memory test */
 #undef  CONFIG_SYS_MEMTEST_SCRATCH

 /* Enable temporary baudrate change while serial download */
 #undef  CONFIG_SYS_LOADS_BAUD_CHANGE

 #define CONFIG_SYS_SDRAM_BASE	(AP325RXA_SDRAM_BASE)
 /* maybe more, but if so u-boot doesn't know about it... */
 #define CONFIG_SYS_SDRAM_SIZE	(128 * 1024 * 1024)
 /* default load address for scripts ?!? */
 #define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_SDRAM_BASE + 16 * 1024 * 1024)

 /* Address of u-boot image in Flash (NOT run time address in SDRAM) ?!? */
 #define CONFIG_SYS_MONITOR_BASE	(AP325RXA_FLASH_BASE_1)
 /* Monitor size */
 #define CONFIG_SYS_MONITOR_LEN	(128 * 1024)
 /* Size of DRAM reserved for malloc() use */
 #define CONFIG_SYS_MALLOC_LEN	(256 * 1024)
 /* size in bytes reserved for initial data */
 #define CONFIG_SYS_GBL_DATA_SIZE	(256)
 #define CONFIG_SYS_BOOTMAPSZ	(8 * 1024 * 1024)

 /* FLASH */
 #define CONFIG_FLASH_CFI_DRIVER 1
 #define CONFIG_SYS_FLASH_CFI
 #undef  CONFIG_SYS_FLASH_QUIET_TEST
 /* print 'E' for empty sector on flinfo */
 #define CONFIG_SYS_FLASH_EMPTY_INFO
 /* Physical start address of Flash memory */
 #define CONFIG_SYS_FLASH_BASE	(AP325RXA_FLASH_BASE_1)
 /* Max number of sectors on each Flash chip */
 #define CONFIG_SYS_MAX_FLASH_SECT	512

 /*
  * IDE support
  */
 #define CONFIG_IDE_RESET	1
 #define CONFIG_SYS_PIO_MODE		1
 #define CONFIG_SYS_IDE_MAXBUS		1	/* IDE bus */
 #define CONFIG_SYS_IDE_MAXDEVICE	1
 #define CONFIG_SYS_ATA_BASE_ADDR	0xB4180000
 #define CONFIG_SYS_ATA_STRIDE		2	/* 1bit shift */
 #define CONFIG_SYS_ATA_DATA_OFFSET	0x200	/* data reg offset */
 #define CONFIG_SYS_ATA_REG_OFFSET	0x200	/* reg offset */
 #define CONFIG_SYS_ATA_ALT_OFFSET	0x210	/* alternate register offset */

 /* if you use all NOR Flash , you change dip-switch. Please see Manual. */
 #define CONFIG_SYS_MAX_FLASH_BANKS	1
 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE + (0 * AP325RXA_FLASH_BANK_SIZE)}

 /* Timeout for Flash erase operations (in ms) */
 #define CONFIG_SYS_FLASH_ERASE_TOUT	(3 * 1000)
 /* Timeout for Flash write operations (in ms) */
 #define CONFIG_SYS_FLASH_WRITE_TOUT	(3 * 1000)
 /* Timeout for Flash set sector lock bit operations (in ms) */
 #define CONFIG_SYS_FLASH_LOCK_TOUT	(3 * 1000)
 /* Timeout for Flash clear lock bit operations (in ms) */
 #define CONFIG_SYS_FLASH_UNLOCK_TOUT	(3 * 1000)

 /*
  * Use hardware flash sectors protection instead
  * of U-Boot software protection
  */
 #undef  CONFIG_SYS_FLASH_PROTECTION
 #undef  CONFIG_SYS_DIRECT_FLASH_TFTP

 /* ENV setting */
 #define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_OVERWRITE	1
 #define CONFIG_ENV_SECT_SIZE	(128 * 1024)
 #define CONFIG_ENV_SIZE		(CONFIG_ENV_SECT_SIZE)
 #define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
 /* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */
 #define CONFIG_ENV_OFFSET		(CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
 #define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SECT_SIZE)

 /* Board Clock */
 #define CONFIG_SYS_CLK_FREQ	33333333
 #define CONFIG_SYS_TMU_CLK_DIV		(4)	/* 4 (default), 16, 64, 256 or 1024 */
 #define CONFIG_SYS_HZ		1000

 #endif	/* __AP325RXA_H */
	/*
	* Configuation settings for the Renesas Solutions AP-325RXA board
	*
	* Copyright (C) 2008 Renesas Solutions Corp.
	* Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	#ifndef __AP325RXA_H
	#define __AP325RXA_H

	#undef DEBUG
	#define CONFIG_SH 1
	#define CONFIG_SH4 1
	#define CONFIG_CPU_SH7723 1
	#define CONFIG_AP325RXA 1

	#define CONFIG_CMD_LOADB
	#define CONFIG_CMD_LOADS
	#define CONFIG_CMD_FLASH
	#define CONFIG_CMD_MEMORY
	#define CONFIG_CMD_NET
	#define CONFIG_CMD_PING
	#define CONFIG_CMD_NFS
	#define CONFIG_CMD_SDRAM
	#define CONFIG_CMD_SAVEENV
	#define CONFIG_CMD_IDE
	#define CONFIG_CMD_EXT2
	#define CONFIG_DOS_PARTITION

	#define CONFIG_BAUDRATE 38400
	#define CONFIG_BOOTDELAY 3
	#define CONFIG_BOOTARGS "console=ttySC2,38400"

	#define CONFIG_VERSION_VARIABLE
	#undef CONFIG_SHOW_BOOT_PROGRESS

	/* SMC9118 */
	#define CONFIG_NET_MULTI
	#define CONFIG_SMC911X 1
	#define CONFIG_SMC911X_32_BIT 1
	#define CONFIG_SMC911X_BASE 0xB6080000

	/* MEMORY */
	#define AP325RXA_SDRAM_BASE (0x88000000)
	#define AP325RXA_FLASH_BASE_1 (0xA0000000)
	#define AP325RXA_FLASH_BANK_SIZE (128 * 1024 * 1024)

	/* undef to save memory */
	#define CONFIG_SYS_LONGHELP
	/* Monitor Command Prompt */
	#define CONFIG_SYS_PROMPT "=> "
	/* Buffer size for input from the Console */
	#define CONFIG_SYS_CBSIZE 256
	/* Buffer size for Console output */
	#define CONFIG_SYS_PBSIZE 256
	/* max args accepted for monitor commands */
	#define CONFIG_SYS_MAXARGS 16
	/* Buffer size for Boot Arguments passed to kernel */
	#define CONFIG_SYS_BARGSIZE 512
	/* List of legal baudrate settings for this board */
	#define CONFIG_SYS_BAUDRATE_TABLE { 38400 }

	/* SCIF */
	#define CONFIG_SCIF_CONSOLE 1
	#define CONFIG_SCIF_A 1 /* SH7723 has SCIF and SCIFA */
	#define CONFIG_CONS_SCIF5 1

	/* Suppress display of console information at boot */
	#undef CONFIG_SYS_CONSOLE_INFO_QUIET
	#undef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
	#undef CONFIG_SYS_CONSOLE_ENV_OVERWRITE

	#define CONFIG_SYS_MEMTEST_START (AP325RXA_SDRAM_BASE)
	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024))

	/* Enable alternate, more extensive, memory test */
	#undef CONFIG_SYS_ALT_MEMTEST
	/* Scratch address used by the alternate memory test */
	#undef CONFIG_SYS_MEMTEST_SCRATCH

	/* Enable temporary baudrate change while serial download */
	#undef CONFIG_SYS_LOADS_BAUD_CHANGE

	#define CONFIG_SYS_SDRAM_BASE (AP325RXA_SDRAM_BASE)
	/* maybe more, but if so u-boot doesn't know about it... */
	#define CONFIG_SYS_SDRAM_SIZE (128 * 1024 * 1024)
	/* default load address for scripts ?!? */
	#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 16 * 1024 * 1024)

	/* Address of u-boot image in Flash (NOT run time address in SDRAM) ?!? */
	#define CONFIG_SYS_MONITOR_BASE (AP325RXA_FLASH_BASE_1)
	/* Monitor size */
	#define CONFIG_SYS_MONITOR_LEN (128 * 1024)
	/* Size of DRAM reserved for malloc() use */
	#define CONFIG_SYS_MALLOC_LEN (256 * 1024)
	/* size in bytes reserved for initial data */
	#define CONFIG_SYS_GBL_DATA_SIZE (256)
	#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024)

	/* FLASH */
	#define CONFIG_FLASH_CFI_DRIVER 1
	#define CONFIG_SYS_FLASH_CFI
	#undef CONFIG_SYS_FLASH_QUIET_TEST
	/* print 'E' for empty sector on flinfo */
	#define CONFIG_SYS_FLASH_EMPTY_INFO
	/* Physical start address of Flash memory */
	#define CONFIG_SYS_FLASH_BASE (AP325RXA_FLASH_BASE_1)
	/* Max number of sectors on each Flash chip */
	#define CONFIG_SYS_MAX_FLASH_SECT 512

	/*
	* IDE support
	*/
	#define CONFIG_IDE_RESET 1
	#define CONFIG_SYS_PIO_MODE 1
	#define CONFIG_SYS_IDE_MAXBUS 1 /* IDE bus */
	#define CONFIG_SYS_IDE_MAXDEVICE 1
	#define CONFIG_SYS_ATA_BASE_ADDR 0xB4180000
	#define CONFIG_SYS_ATA_STRIDE 2 /* 1bit shift */
	#define CONFIG_SYS_ATA_DATA_OFFSET 0x200 /* data reg offset */
	#define CONFIG_SYS_ATA_REG_OFFSET 0x200 /* reg offset */
	#define CONFIG_SYS_ATA_ALT_OFFSET 0x210 /* alternate register offset */

	/* if you use all NOR Flash , you change dip-switch. Please see Manual. */
	#define CONFIG_SYS_MAX_FLASH_BANKS 1
	#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE + (0 * AP325RXA_FLASH_BANK_SIZE)}

	/* Timeout for Flash erase operations (in ms) */
	#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * 1000)
	/* Timeout for Flash write operations (in ms) */
	#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * 1000)
	/* Timeout for Flash set sector lock bit operations (in ms) */
	#define CONFIG_SYS_FLASH_LOCK_TOUT (3 * 1000)
	/* Timeout for Flash clear lock bit operations (in ms) */
	#define CONFIG_SYS_FLASH_UNLOCK_TOUT (3 * 1000)

	/*
	* Use hardware flash sectors protection instead
	* of U-Boot software protection
	*/
	#undef CONFIG_SYS_FLASH_PROTECTION
	#undef CONFIG_SYS_DIRECT_FLASH_TFTP

	/* ENV setting */
	#define CONFIG_ENV_IS_IN_FLASH
	#define CONFIG_ENV_OVERWRITE 1
	#define CONFIG_ENV_SECT_SIZE (128 * 1024)
	#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE)
	#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
	/* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */
	#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
	#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE)

	/* Board Clock */
	#define CONFIG_SYS_CLK_FREQ 33333333
	#define CONFIG_SYS_TMU_CLK_DIV (4) /* 4 (default), 16, 64, 256 or 1024 */
	#define CONFIG_SYS_HZ 1000

	#endif /* __AP325RXA_H */