| /* |
| * Copyright (C) 2013 Altera Corporation |
| * |
| * This file is generated by sopc2dts. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| /dts-v1/; |
| |
| / { |
| model = "altr,qsys_ghrd_3c120"; |
| compatible = "altr,qsys_ghrd_3c120"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu: cpu@0x0 { |
| device_type = "cpu"; |
| compatible = "altr,nios2-1.0"; |
| reg = <0x00000000>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| clock-frequency = <125000000>; |
| dcache-line-size = <32>; |
| icache-line-size = <32>; |
| dcache-size = <32768>; |
| icache-size = <32768>; |
| altr,implementation = "fast"; |
| altr,pid-num-bits = <8>; |
| altr,tlb-num-ways = <16>; |
| altr,tlb-num-entries = <128>; |
| altr,tlb-ptr-sz = <7>; |
| altr,has-div = <1>; |
| altr,has-mul = <1>; |
| altr,reset-addr = <0xc2800000>; |
| altr,fast-tlb-miss-addr = <0xc7fff400>; |
| altr,exception-addr = <0xd0000020>; |
| altr,has-initda = <1>; |
| altr,has-mmu = <1>; |
| }; |
| }; |
| |
| memory@0 { |
| device_type = "memory"; |
| reg = <0x10000000 0x08000000>, |
| <0x07fff400 0x00000400>; |
| }; |
| |
| sopc@0 { |
| device_type = "soc"; |
| ranges; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "altr,avalon", "simple-bus"; |
| bus-frequency = <125000000>; |
| |
| pb_cpu_to_io: bridge@0x8000000 { |
| compatible = "simple-bus"; |
| reg = <0x08000000 0x00800000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x00002000 0x08002000 0x00002000>, |
| <0x00004000 0x08004000 0x00000400>, |
| <0x00004400 0x08004400 0x00000040>, |
| <0x00004800 0x08004800 0x00000040>, |
| <0x00004c80 0x08004c80 0x00000020>, |
| <0x00004cc0 0x08004cc0 0x00000010>, |
| <0x00004ce0 0x08004ce0 0x00000010>, |
| <0x00004d00 0x08004d00 0x00000010>, |
| <0x00004d40 0x08004d40 0x00000008>, |
| <0x00004d50 0x08004d50 0x00000008>, |
| <0x00008000 0x08008000 0x00000020>, |
| <0x00400000 0x08400000 0x00000020>; |
| |
| timer_1ms: timer@0x400000 { |
| compatible = "altr,timer-1.0"; |
| reg = <0x00400000 0x00000020>; |
| interrupt-parent = <&cpu>; |
| interrupts = <11>; |
| clock-frequency = <125000000>; |
| }; |
| |
| timer_0: timer@0x8000 { |
| compatible = "altr,timer-1.0"; |
| reg = < 0x00008000 0x00000020 >; |
| interrupt-parent = < &cpu >; |
| interrupts = < 5 >; |
| clock-frequency = < 125000000 >; |
| }; |
| |
| sysid: sysid@0x4d40 { |
| compatible = "altr,sysid-1.0"; |
| reg = <0x00004d40 0x00000008>; |
| }; |
| |
| jtag_uart: serial@0x4d50 { |
| compatible = "altr,juart-1.0"; |
| reg = <0x00004d50 0x00000008>; |
| interrupt-parent = <&cpu>; |
| interrupts = <1>; |
| }; |
| |
| tse_mac: ethernet@0x4000 { |
| compatible = "altr,tse-1.0"; |
| reg = <0x00004000 0x00000400>, |
| <0x00004400 0x00000040>, |
| <0x00004800 0x00000040>, |
| <0x00002000 0x00002000>; |
| reg-names = "control_port", "rx_csr", "tx_csr", "s1"; |
| interrupt-parent = <&cpu>; |
| interrupts = <2 3>; |
| interrupt-names = "rx_irq", "tx_irq"; |
| rx-fifo-depth = <8192>; |
| tx-fifo-depth = <8192>; |
| max-frame-size = <1518>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| phy-mode = "rgmii-id"; |
| phy-handle = <&phy0>; |
| tse_mac_mdio: mdio { |
| compatible = "altr,tse-mdio"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| phy0: ethernet-phy@18 { |
| reg = <18>; |
| device_type = "ethernet-phy"; |
| }; |
| }; |
| }; |
| |
| uart: serial@0x4c80 { |
| compatible = "altr,uart-1.0"; |
| reg = <0x00004c80 0x00000020>; |
| interrupt-parent = <&cpu>; |
| interrupts = <10>; |
| current-speed = <115200>; |
| clock-frequency = <62500000>; |
| }; |
| |
| user_led_pio_8out: gpio@0x4cc0 { |
| compatible = "altr,pio-1.0"; |
| reg = <0x00004cc0 0x00000010>; |
| resetvalue = <255>; |
| altr,gpio-bank-width = <8>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| gpio-bank-name = "led"; |
| }; |
| |
| user_dipsw_pio_8in: gpio@0x4ce0 { |
| compatible = "altr,pio-1.0"; |
| reg = <0x00004ce0 0x00000010>; |
| interrupt-parent = <&cpu>; |
| interrupts = <8>; |
| edge_type = <2>; |
| level_trigger = <0>; |
| resetvalue = <0>; |
| altr,gpio-bank-width = <8>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| gpio-bank-name = "dipsw"; |
| }; |
| |
| user_pb_pio_4in: gpio@0x4d00 { |
| compatible = "altr,pio-1.0"; |
| reg = <0x00004d00 0x00000010>; |
| interrupt-parent = <&cpu>; |
| interrupts = <9>; |
| edge_type = <2>; |
| level_trigger = <0>; |
| resetvalue = <0>; |
| altr,gpio-bank-width = <4>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| gpio-bank-name = "pb"; |
| }; |
| }; |
| |
| cfi_flash_64m: flash@0x0 { |
| compatible = "cfi-flash"; |
| reg = <0x00000000 0x04000000>; |
| bank-width = <2>; |
| device-width = <1>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| partition@800000 { |
| reg = <0x00800000 0x01e00000>; |
| label = "JFFS2 Filesystem"; |
| }; |
| }; |
| }; |
| |
| chosen { |
| bootargs = "debug console=ttyJ0,115200"; |
| stdout-path = &jtag_uart; |
| }; |
| }; |