| /* | 
 |  * (C) Copyright 2004 | 
 |  * Elmeg Communications Systems GmbH, Juergen Selent (j.selent@elmeg.de) | 
 |  * | 
 |  * Support for the Elmeg VoVPN Gateway Module | 
 |  * ------------------------------------------ | 
 |  * This is a signle bank flashdriver for INTEL 28F320J3, 28F640J3 | 
 |  * and 28F128J3A flashs working in 8 Bit mode. | 
 |  * | 
 |  * Most of this code is taken from existing u-boot source code. | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or | 
 |  * modify it under the terms of the GNU General Public License as | 
 |  * published by the Free Software Foundation; either version 2 of | 
 |  * the License, or (at your option) any later version. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program; if not, write to the Free Software | 
 |  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | 
 |  * MA 02111-1307 USA | 
 |  */ | 
 |  | 
 | #include <common.h> | 
 |  | 
 | flash_info_t				flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; | 
 |  | 
 | #define FLASH_CMD_READ_ID		0x90 | 
 | #define FLASH_CMD_READ_STATUS		0x70 | 
 | #define FLASH_CMD_RESET			0xff | 
 | #define FLASH_CMD_BLOCK_ERASE		0x20 | 
 | #define FLASH_CMD_ERASE_CONFIRM		0xd0 | 
 | #define FLASH_CMD_CLEAR_STATUS		0x50 | 
 | #define FLASH_CMD_SUSPEND_ERASE		0xb0 | 
 | #define FLASH_CMD_WRITE			0x40 | 
 | #define FLASH_CMD_WRITE_BUFF		0xe8 | 
 | #define FLASH_CMD_PROG_RESUME		0xd0 | 
 | #define FLASH_CMD_PROTECT		0x60 | 
 | #define FLASH_CMD_PROTECT_SET		0x01 | 
 | #define FLASH_CMD_PROTECT_CLEAR		0xd0 | 
 | #define FLASH_STATUS_DONE		0x80 | 
 |  | 
 | #define FLASH_WRITE_BUFFER_SIZE		32 | 
 |  | 
 | #ifdef CONFIG_SYS_FLASH_16BIT | 
 | #define FLASH_WORD_SIZE			unsigned short | 
 | #define FLASH_ID_MASK			0xffff | 
 | #define FLASH_CMD_ADDR_SHIFT		0 | 
 | #else | 
 | #define FLASH_WORD_SIZE			unsigned char | 
 | #define FLASH_ID_MASK			0xff | 
 | /* A0 is not used in either 8x or 16x for READ ID */ | 
 | #define FLASH_CMD_ADDR_SHIFT		1 | 
 | #endif | 
 |  | 
 |  | 
 | static unsigned long | 
 | flash_get(volatile FLASH_WORD_SIZE *addr, flash_info_t *info) | 
 | { | 
 | 	volatile FLASH_WORD_SIZE *p; | 
 | 	FLASH_WORD_SIZE value; | 
 | 	int i; | 
 |  | 
 | 	addr[0] = FLASH_CMD_READ_ID; | 
 |  | 
 | 	/* manufactor */ | 
 | 	value = addr[0 << FLASH_CMD_ADDR_SHIFT]; | 
 | 	switch (value) { | 
 | 	case (INTEL_MANUFACT & FLASH_ID_MASK): | 
 | 		info->flash_id = FLASH_MAN_INTEL; | 
 | 		break; | 
 | 	default: | 
 | 		info->flash_id = FLASH_UNKNOWN; | 
 | 		info->sector_count = 0; | 
 | 		info->size = 0; | 
 | 		*addr = FLASH_CMD_RESET; | 
 | 		return (0); | 
 |  | 
 | 	} | 
 |  | 
 | 	/* device */ | 
 | 	value = addr[1 << FLASH_CMD_ADDR_SHIFT]; | 
 | 	switch (value) { | 
 | 	case (INTEL_ID_28F320J3A & FLASH_ID_MASK): | 
 | 		info->flash_id += FLASH_28F320J3A; | 
 | 		info->sector_count = 32; | 
 | 		info->size = 0x00400000; | 
 | 		break; | 
 | 	case (INTEL_ID_28F640J3A & FLASH_ID_MASK): | 
 | 		info->flash_id += FLASH_28F640J3A; | 
 | 		info->sector_count = 64; | 
 | 		info->size = 0x00800000; | 
 | 		break; | 
 | 	case (INTEL_ID_28F128J3A & FLASH_ID_MASK): | 
 | 		info->flash_id += FLASH_28F128J3A; | 
 | 		info->sector_count = 128; | 
 | 		info->size = 0x01000000; | 
 | 		break; | 
 | 	default: | 
 | 		info->flash_id = FLASH_UNKNOWN; | 
 | 		info->sector_count = 0; | 
 | 		info->size = 0; | 
 | 		*addr = FLASH_CMD_RESET; | 
 | 		return (0); | 
 | 	} | 
 |  | 
 | 	/* setup sectors */ | 
 | 	for (i = 0; i < info->sector_count; i++) { | 
 | 		info->start[i] = (unsigned long)addr + (i * info->size/info->sector_count); | 
 | 	} | 
 |  | 
 | 	/* check protected sectors */ | 
 | 	for (i = 0; i < info->sector_count; i++) { | 
 | 		p = (volatile FLASH_WORD_SIZE *)(info->start[i]); | 
 | 		info->protect[i] = p[2 << FLASH_CMD_ADDR_SHIFT] & 1; | 
 | 	} | 
 |  | 
 | 	/* reset bank */ | 
 | 	*addr = FLASH_CMD_RESET; | 
 | 	return (info->size); | 
 | } | 
 |  | 
 | unsigned long | 
 | flash_init(void) | 
 | { | 
 | 	unsigned long	size; | 
 | 	int		i; | 
 |  | 
 | 	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) { | 
 | 		flash_info[i].flash_id = FLASH_UNKNOWN; | 
 | 	} | 
 | 	size = flash_get((volatile FLASH_WORD_SIZE *)CONFIG_SYS_FLASH_BASE, &flash_info[0]); | 
 | 	if (flash_info[0].flash_id == FLASH_UNKNOWN) { | 
 | 		printf ("## Unknown FLASH Size=0x%08lx\n", size); | 
 | 		return (0); | 
 | 	} | 
 |  | 
 | 	/* always protect 1 sector containing the HRCW */ | 
 | 	flash_protect(FLAG_PROTECT_SET, | 
 | 		      flash_info[0].start[0], | 
 | 		      flash_info[0].start[1] - 1, | 
 | 		      &flash_info[0]); | 
 |  | 
 | #if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE | 
 | 	flash_protect(FLAG_PROTECT_SET, | 
 | 		      CONFIG_SYS_MONITOR_FLASH, | 
 | 		      CONFIG_SYS_MONITOR_FLASH+CONFIG_SYS_MONITOR_LEN-1, | 
 | 		      &flash_info[0]); | 
 | #endif | 
 | #ifdef	CONFIG_ENV_IS_IN_FLASH | 
 | 	flash_protect(FLAG_PROTECT_SET, | 
 | 		      CONFIG_ENV_ADDR, | 
 | 		      CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1, | 
 | 		      &flash_info[0]); | 
 | #endif | 
 | 	return (size); | 
 | } | 
 |  | 
 | void | 
 | flash_print_info(flash_info_t *info) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	if (info->flash_id == FLASH_UNKNOWN) { | 
 | 		printf ("missing or unknown FLASH type\n"); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	switch (info->flash_id & FLASH_VENDMASK) { | 
 | 	case FLASH_MAN_INTEL:	printf ("INTEL ");		break; | 
 | 	default:		printf ("Unknown Vendor ");	break; | 
 | 	} | 
 |  | 
 | 	switch (info->flash_id & FLASH_TYPEMASK) { | 
 | 	case FLASH_28F320J3A:	printf ("28F320JA3 (32 Mbit)\n"); | 
 | 				break; | 
 | 	case FLASH_28F640J3A:	printf ("28F640JA3 (64 Mbit)\n"); | 
 | 				break; | 
 | 	case FLASH_28F128J3A:	printf ("28F128JA3 (128 Mbit)\n"); | 
 | 				break; | 
 | 	default:		printf ("Unknown Chip Type"); | 
 | 				break; | 
 | 	} | 
 |  | 
 | 	printf ("  Size: %ld MB in %d Sectors\n", | 
 | 		info->size >> 20, info->sector_count); | 
 |  | 
 | 	printf ("  Sector Start Addresses:"); | 
 | 	for (i=0; i<info->sector_count; ++i) { | 
 | 		if ((i % 5) == 0) | 
 | 			printf ("\n   "); | 
 | 		printf (" %08lX%s", | 
 | 			info->start[i], | 
 | 			info->protect[i] ? " (RO)" : "     " | 
 | 		); | 
 | 	} | 
 | 	printf ("\n"); | 
 | } | 
 |  | 
 | int | 
 | flash_erase(flash_info_t *info, int s_first, int s_last) | 
 | { | 
 | 	unsigned long start, now, last; | 
 | 	int flag, prot, sect; | 
 | 	volatile FLASH_WORD_SIZE *addr; | 
 | 	FLASH_WORD_SIZE status; | 
 |  | 
 | 	if ((s_first < 0) || (s_first > s_last)) { | 
 | 		if (info->flash_id == FLASH_UNKNOWN) { | 
 | 			printf ("- missing\n"); | 
 | 		} else { | 
 | 			printf ("- no sectors to erase\n"); | 
 | 		} | 
 | 		return (1); | 
 | 	} | 
 |  | 
 | 	if (info->flash_id == FLASH_UNKNOWN) { | 
 | 		printf ("Cannot erase unknown flash - aborted\n"); | 
 | 		return (1); | 
 | 	} | 
 |  | 
 | 	prot = 0; | 
 | 	for (sect=s_first; sect<=s_last; ++sect) { | 
 | 		if (info->protect[sect]) { | 
 | 			prot++; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (prot) { | 
 | 		printf ("- Warning: %d protected sectors will not be erased!\n", prot); | 
 | 	} else { | 
 | 		printf ("\n"); | 
 | 	} | 
 |  | 
 | 	start = get_timer (0); | 
 | 	last  = start; | 
 |  | 
 | 	for (sect = s_first; sect<=s_last; sect++) { | 
 | 		if (info->protect[sect]) { | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		addr = (volatile FLASH_WORD_SIZE *)(info->start[sect]); | 
 | 		/* Disable interrupts which might cause a timeout here */ | 
 | 		flag = disable_interrupts(); | 
 |  | 
 | #ifdef DEBUG | 
 | 		printf("Erase sector %d at start addr 0x%08X", sect, (unsigned int)info->start[sect]); | 
 | #endif | 
 |  | 
 | 		*addr = FLASH_CMD_CLEAR_STATUS; | 
 | 		*addr = FLASH_CMD_BLOCK_ERASE; | 
 | 		*addr = FLASH_CMD_ERASE_CONFIRM; | 
 |  | 
 | 		/* re-enable interrupts if necessary */ | 
 | 		if (flag) { | 
 | 			enable_interrupts(); | 
 | 		} | 
 |  | 
 | 		/* wait at least 80us - let's wait 1 ms */ | 
 | 		udelay (1000); | 
 |  | 
 | 		while (((status = *addr) & FLASH_STATUS_DONE) != FLASH_STATUS_DONE) { | 
 | 			if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { | 
 | 				printf("Flash erase timeout at address %lx\n", info->start[sect]); | 
 | 				*addr = FLASH_CMD_SUSPEND_ERASE; | 
 | 				*addr = FLASH_CMD_RESET; | 
 | 				return (1); | 
 | 			} | 
 |  | 
 | 			/* show that we're waiting */ | 
 | 			if ((now - last) > 1000) {	/* every second */ | 
 | 				putc ('.'); | 
 | 				last = now; | 
 | 			} | 
 | 		} | 
 | 		*addr = FLASH_CMD_RESET; | 
 | 	} | 
 | 	printf (" done\n"); | 
 | 	return (0); | 
 | } | 
 |  | 
 | static int | 
 | write_buff2( volatile FLASH_WORD_SIZE *dst, | 
 | 	     volatile FLASH_WORD_SIZE *src, | 
 | 	     unsigned long cnt ) | 
 | { | 
 | 	unsigned long start; | 
 | 	FLASH_WORD_SIZE status; | 
 | 	int flag, i; | 
 |  | 
 | 	start = get_timer (0); | 
 | 	while (1) { | 
 | 		/* Disable interrupts which might cause a timeout here */ | 
 | 		flag = disable_interrupts(); | 
 | 		dst[0] = FLASH_CMD_WRITE_BUFF; | 
 | 		if ((status = *dst) & FLASH_STATUS_DONE) { | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		/* re-enable interrupts if necessary */ | 
 | 		if (flag) { | 
 | 			enable_interrupts(); | 
 | 		} | 
 |  | 
 | 		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { | 
 | 			return (-1); | 
 | 		} | 
 | 	} | 
 | 	dst[0] = (FLASH_WORD_SIZE)(cnt - 1); | 
 | 	for (i=0; i<cnt; i++) { | 
 | 		dst[i] = src[i]; | 
 | 	} | 
 | 	dst[0] = FLASH_CMD_PROG_RESUME; | 
 |  | 
 | 	if (flag) { | 
 | 		enable_interrupts(); | 
 | 	} | 
 |  | 
 | 	return( 0 ); | 
 | } | 
 |  | 
 | static int | 
 | poll_status( volatile FLASH_WORD_SIZE *addr ) | 
 | { | 
 | 	unsigned long start; | 
 |  | 
 | 	start = get_timer (0); | 
 | 	/* wait for error or finish */ | 
 | 	while (1) { | 
 | 		if (*addr == FLASH_STATUS_DONE) { | 
 | 			if (*addr == FLASH_STATUS_DONE) { | 
 | 				break; | 
 | 			} | 
 | 		} | 
 | 		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { | 
 | 			*addr = FLASH_CMD_RESET; | 
 | 			return (-1); | 
 | 		} | 
 | 	} | 
 | 	*addr = FLASH_CMD_RESET; | 
 | 	return (0); | 
 | } | 
 |  | 
 | /* | 
 |  * write_buff return values: | 
 |  * 0 - OK | 
 |  * 1 - write timeout | 
 |  * 2 - Flash not erased | 
 |  * 4 - Flash not identified | 
 |  */ | 
 | int | 
 | write_buff(flash_info_t *info, uchar *src, ulong udst, ulong cnt) | 
 | { | 
 | 	volatile FLASH_WORD_SIZE *addr, *dst; | 
 | 	unsigned long bcnt; | 
 | 	int flag, i; | 
 |  | 
 | 	if (info->flash_id == FLASH_UNKNOWN) { | 
 | 		return (4); | 
 | 	} | 
 |  | 
 | 	addr = (volatile FLASH_WORD_SIZE *)(info->start[0]); | 
 | 	dst = (volatile FLASH_WORD_SIZE *) udst; | 
 |  | 
 | #ifdef CONFIG_SYS_FLASH_16BIT | 
 | #error NYI | 
 | #else | 
 | 	while (cnt > 0) { | 
 | 		/* Check if buffer write is possible */ | 
 | 		if (cnt > 1 && (((unsigned long)dst & (FLASH_WRITE_BUFFER_SIZE - 1)) == 0)) { | 
 | 			bcnt = cnt > FLASH_WRITE_BUFFER_SIZE ? FLASH_WRITE_BUFFER_SIZE : cnt; | 
 | 			/* Check if Flash is (sufficiently) erased */ | 
 | 			for (i=0; i<bcnt; i++) { | 
 | 				if ((dst[i] & src[i]) != src[i]) { | 
 | 					return (2); | 
 | 				} | 
 | 			} | 
 | 			if (write_buff2( dst,src,bcnt ) != 0) { | 
 | 				addr[0] = FLASH_CMD_READ_STATUS; | 
 | 			} | 
 | 			if (poll_status( dst ) != 0) { | 
 | 				return (1); | 
 | 			} | 
 | 			cnt -= bcnt; | 
 | 			dst += bcnt; | 
 | 			src += bcnt; | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		/* Check if Flash is (sufficiently) erased */ | 
 | 		if ((*dst & *src) != *src) { | 
 | 			return (2); | 
 | 		} | 
 |  | 
 | 		/* Disable interrupts which might cause a timeout here */ | 
 | 		flag = disable_interrupts(); | 
 | 		addr[0] = FLASH_CMD_ERASE_CONFIRM; | 
 | 		addr[0] = FLASH_CMD_WRITE; | 
 | 		*dst++ = *src++; | 
 | 		/* re-enable interrupts if necessary */ | 
 | 		if (flag) { | 
 | 			enable_interrupts(); | 
 | 		} | 
 |  | 
 | 		if (poll_status( dst ) != 0) { | 
 | 			return (1); | 
 | 		} | 
 | 		cnt --; | 
 | 	} | 
 | #endif | 
 | 	return (0); | 
 | } | 
 |  | 
 | int | 
 | flash_real_protect(flash_info_t *info, long sector, int prot) | 
 | { | 
 | 	volatile FLASH_WORD_SIZE *addr; | 
 | 	unsigned long start; | 
 |  | 
 | 	addr = (volatile FLASH_WORD_SIZE *)(info->start[sector]); | 
 | 	*addr = FLASH_CMD_CLEAR_STATUS; | 
 | 	*addr = FLASH_CMD_PROTECT; | 
 |  | 
 | 	if(prot) { | 
 | 		*addr = FLASH_CMD_PROTECT_SET; | 
 | 	} else { | 
 | 		*addr = FLASH_CMD_PROTECT_CLEAR; | 
 | 	} | 
 |  | 
 | 	/* wait for error or finish */ | 
 | 	start = get_timer (0); | 
 | 	while(!(addr[0] & FLASH_STATUS_DONE)){ | 
 | 		if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { | 
 | 			printf("Flash protect timeout at address %lx\n",  info->start[sector]); | 
 | 			addr[0] = FLASH_CMD_RESET; | 
 | 			return (1); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* Set software protect flag */ | 
 | 	info->protect[sector] = prot; | 
 | 	*addr = FLASH_CMD_RESET; | 
 | 	return (0); | 
 | } |