blob: ac12f303a3befa4f751c9e25decf4991f950bbcf [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2016 Stefan Roese <sr@denx.de>
* Copyright (C) 2016 George McCollister <george.mccollister@gmail.com>
*/
#include <common.h>
#include <asm/fsp/fsp_support.h>
/* ALC262 Verb Table - 10EC0262 */
static const u32 verb_table_data13[] = {
/* Pin Complex (NID 0x11) */
0x01171cf0,
0x01171d11,
0x01171e11,
0x01171f41,
/* Pin Complex (NID 0x12) */
0x01271cf0,
0x01271d11,
0x01271e11,
0x01271f41,
/* Pin Complex (NID 0x14) */
0x01471c10,
0x01471d40,
0x01471e01,
0x01471f01,
/* Pin Complex (NID 0x15) */
0x01571cf0,
0x01571d11,
0x01571e11,
0x01571f41,
/* Pin Complex (NID 0x16) */
0x01671cf0,
0x01671d11,
0x01671e11,
0x01671f41,
/* Pin Complex (NID 0x18) */
0x01871c20,
0x01871d98,
0x01871ea1,
0x01871f01,
/* Pin Complex (NID 0x19) */
0x01971c21,
0x01971d98,
0x01971ea1,
0x01971f02,
/* Pin Complex (NID 0x1A) */
0x01a71c2f,
0x01a71d30,
0x01a71e81,
0x01a71f01,
/* Pin Complex */
0x01b71c1f,
0x01b71d40,
0x01b71e21,
0x01b71f02,
/* Pin Complex */
0x01c71cf0,
0x01c71d11,
0x01c71e11,
0x01c71f41,
/* Pin Complex */
0x01d71c01,
0x01d71dc6,
0x01d71e14,
0x01d71f40,
/* Pin Complex */
0x01e71cf0,
0x01e71d11,
0x01e71e11,
0x01e71f41,
/* Pin Complex */
0x01f71cf0,
0x01f71d11,
0x01f71e11,
0x01f71f41,
};
/*
* This needs to be in ROM since if we put it in CAR, FSP init loses it when
* it drops CAR.
*
* VerbTable: (RealTek ALC262)
* Revision ID = 0xFF, support all steps
* Codec Verb Table For AZALIA
* Codec Address: CAd value (0/1/2)
* Codec Vendor: 0x10EC0262
*/
static const struct azalia_verb_table azalia_verb_table[] = {
{
{
0x10ec0262,
0x0000,
0xff,
0x01,
0x000b,
0x0002,
},
verb_table_data13
}
};
static const struct azalia_config azalia_config = {
.pme_enable = 1,
.docking_supported = 1,
.docking_attached = 0,
.hdmi_codec_enable = 1,
.azalia_v_ci_enable = 1,
.rsvdbits = 0,
.verb_table_num = 1,
.verb_table = azalia_verb_table,
.reset_wait_timer_ms = 300
};
void update_fsp_azalia_configs(const struct azalia_config **azalia)
{
*azalia = &azalia_config;
}
int board_early_init_f(void)
{
/*
* The FSP enables the BayTrail internal legacy UART (again).
* Disable it again, so that the one on the EC can be used.
*/
setup_internal_uart(0);
return 0;
}