blob: 11ca08d1a0b94f09104b1397e8a1697da5ec7ad0 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright 2008 Freescale Semiconductor, Inc.
*/
#include <common.h>
#include <fsl_ddr_sdram.h>
#include <fsl_ddr_dimm_params.h>
struct board_specific_parameters {
u32 n_ranks;
u32 datarate_mhz_high;
u32 clk_adjust;
u32 cpo;
u32 write_data_delay;
u32 force_2t;
};
/*
* This table contains all valid speeds we want to override with board
* specific parameters. datarate_mhz_high values need to be in ascending order
* for each n_ranks group.
*
* For DDR2 DIMM, all combinations of clk_adjust and write_data_delay have been
* tested. For RDIMM, clk_adjust = 4 and write_data_delay = 3 is optimized for
* all clocks from 400MT/s to 800MT/s, verified with Kingston KVR800D2D8P6/2G.
* For UDIMM, clk_adjust = 8 and write_delay = 5 is optimized for all clocks
* from 400MT/s to 800MT/s, verified with Micron MT18HTF25672AY-800E1.
*
* CPO value doesn't matter if workaround for errata 111 and 134 enabled.
*/
static const struct board_specific_parameters udimm0[] = {
/*
* memory controller 0
* num| hi| clk| cpo|wrdata|2T
* ranks| mhz|adjst| | delay|
*/
{2, 333, 8, 7, 5, 0},
{2, 400, 8, 9, 5, 0},
{2, 549, 8, 11, 5, 0},
{2, 680, 8, 10, 5, 0},
{2, 850, 8, 12, 5, 1},
{1, 333, 6, 7, 3, 0},
{1, 400, 6, 9, 3, 0},
{1, 549, 6, 11, 3, 0},
{1, 680, 1, 10, 5, 0},
{1, 850, 1, 12, 5, 0},
{}
};
static const struct board_specific_parameters udimm1[] = {
/*
* memory controller 1
* num| hi| clk| cpo|wrdata|2T
* ranks| mhz|adjst| | delay|
*/
{2, 333, 8, 7, 5, 0},
{2, 400, 8, 9, 5, 0},
{2, 549, 8, 11, 5, 0},
{2, 680, 8, 11, 5, 0},
{2, 850, 8, 13, 5, 1},
{1, 333, 6, 7, 3, 0},
{1, 400, 6, 9, 3, 0},
{1, 549, 6, 11, 3, 0},
{1, 680, 1, 11, 6, 0},
{1, 850, 1, 13, 6, 0},
{}
};
static const struct board_specific_parameters *udimms[] = {
udimm0,
udimm1,
};
static const struct board_specific_parameters rdimm0[] = {
/*
* memory controller 0
* num| hi| clk| cpo|wrdata|2T
* ranks| mhz|adjst| | delay|
*/
{2, 333, 4, 7, 3, 0},
{2, 400, 4, 9, 3, 0},
{2, 549, 4, 11, 3, 0},
{2, 680, 4, 10, 3, 0},
{2, 850, 4, 12, 3, 1},
{}
};
static const struct board_specific_parameters rdimm1[] = {
/*
* memory controller 1
* num| hi| clk| cpo|wrdata|2T
* ranks| mhz|adjst| | delay|
*/
{2, 333, 4, 7, 3, 0},
{2, 400, 4, 9, 3, 0},
{2, 549, 4, 11, 3, 0},
{2, 680, 4, 11, 3, 0},
{2, 850, 4, 13, 3, 1},
{}
};
static const struct board_specific_parameters *rdimms[] = {
rdimm0,
rdimm1,
};
void fsl_ddr_board_options(memctl_options_t *popts,
dimm_params_t *pdimm,
unsigned int ctrl_num)
{
const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
ulong ddr_freq;
if (ctrl_num > 1) {
printf("Wrong parameter for controller number %d", ctrl_num);
return;
}
if (!pdimm->n_ranks)
return;
if (popts->registered_dimm_en)
pbsp = rdimms[ctrl_num];
else
pbsp = udimms[ctrl_num];
/* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr
* freqency and n_banks specified in board_specific_parameters table.
*/
ddr_freq = get_ddr_freq(0) / 1000000;
while (pbsp->datarate_mhz_high) {
if (pbsp->n_ranks == pdimm->n_ranks) {
if (ddr_freq <= pbsp->datarate_mhz_high) {
popts->clk_adjust = pbsp->clk_adjust;
popts->cpo_override = pbsp->cpo;
popts->write_data_delay =
pbsp->write_data_delay;
popts->twot_en = pbsp->force_2t;
goto found;
}
pbsp_highest = pbsp;
}
pbsp++;
}
if (pbsp_highest) {
printf("Error: board specific timing not found "
"for data rate %lu MT/s!\n"
"Trying to use the highest speed (%u) parameters\n",
ddr_freq, pbsp_highest->datarate_mhz_high);
popts->clk_adjust = pbsp->clk_adjust;
popts->cpo_override = pbsp->cpo;
popts->write_data_delay = pbsp->write_data_delay;
popts->twot_en = pbsp->force_2t;
} else {
panic("DIMM is not supported by this board");
}
found:
/*
* Factors to consider for half-strength driver enable:
* - number of DIMMs installed
*/
popts->half_strength_driver_enable = 0;
}