| #include <common.h> |
| #include <command.h> |
| #include <asm/arch/tsensor.h> |
| |
| static int do_read_temp(cmd_tbl_t *cmdtp, int flag1, int argc, char * const argv[]) |
| { |
| printf("read temp\n"); |
| return temp_read_entry(); |
| } |
| |
| static int do_temp_triming(cmd_tbl_t *cmdtp, int flag1, int argc, char * const argv[]) |
| { |
| int ret = -1; |
| int ver, temp_base; |
| |
| if (argc <3) { |
| printf("too little args for temp triming!!\n"); |
| return CMD_RET_USAGE; |
| } |
| |
| temp_base = simple_strtoul(argv[1], NULL, 10); |
| printf("set base temperature: %d\n", temp_base); |
| |
| ver = simple_strtoul(argv[2], NULL, 16); |
| ret = temp_trim_entry(temp_base, ver); |
| if (!ret) |
| printf("temperature triming error %x\n", ret); |
| return ret; |
| } |
| |
| static int do_boot_cooling(cmd_tbl_t *cmdtp, int flag1, int argc, char * const argv[]) |
| { |
| return temp_cooling_entry(); |
| } |
| |
| U_BOOT_CMD( |
| boot_cooling, 5, 0, do_boot_cooling, |
| "cpu temp-system", |
| "boot_cooling pos" |
| ); |
| |
| U_BOOT_CMD( |
| read_temp, 5, 0, do_read_temp, |
| "cpu temp-system", |
| "read_temp pos" |
| ); |
| |
| static char temp_trim_help_text[] = |
| "temp_triming x [ver]\n" |
| " - for manual trimming chip\n" |
| " - x: [decimal]the temperature of the chip surface\n" |
| " - [ver]: [decimal]only for New thermal sensor\n" |
| " BBT: OPS socket board, which can change chips\n" |
| " online: reference boards witch chip mounted\n" |
| " AXG or TXHD:\n" |
| " 5 (0101)b: BBT, thermal0\n" |
| " 6 (0110)b: BBT, thermal1\n" |
| " 7 (0111)b: BBT, thermal01\n" |
| " d (1101)b: online, thermal0\n" |
| " e (1110)b: online, thermal1\n" |
| " f (1111)b: online, thermal01\n" |
| " G12A or G12B:\n" |
| " 88 (10001000)b: BBT-SW, thermal1 thermal2, valid thermal cali data\n" |
| " 89 (10001001)b: BBT-OPS, thermal1 thermal2, valid thermal cali data\n" |
| " 8b (10001001)b: SLT, thermal1 thermal2, valid thermal cali data\n" |
| " TL1:\n" |
| " 8c (10001001)b: BBT-SW, thermal1 ~ 3, valid thermal cali data\n" |
| " 8d (10001001)b: BBT-OPS, thermal1 ~ 3, valid thermal cali data\n" |
| " 8f (10001001)b: SLT, thermal1 ~ 3, valid thermal cali data\n"; |
| |
| U_BOOT_CMD( |
| temp_triming, 5, 1, do_temp_triming, |
| "cpu temp-system", |
| temp_trim_help_text |
| ); |
| |