| Sandbox pmic |
| |
| This device uses two drivers: |
| - drivers/power/pmic/sandbox.c (for parent device) |
| - drivers/power/regulator/sandbox.c (for child regulators) |
| |
| This file describes the binding info for the PMIC driver. |
| |
| To bind the regulators, please read the regulator binding info: |
| - doc/device-tree-bindings/regulator/sandbox.txt |
| |
| Required PMIC node properties: |
| - compatible: "sandbox,pmic" |
| - reg = 0x40 |
| |
| Required PMIC's "emul" subnode, with property: |
| - compatible: "sandbox,i2c-pmic" |
| |
| With the above properties, the pmic device can be used for read/write only. |
| To bind each regulator, the optional regulator subnodes should exists. |
| |
| Optional subnodes: |
| - ldo/buck subnodes of each device's regulator (see regulator binding info) |
| |
| Example: |
| |
| sandbox_pmic { |
| compatible = "sandbox,pmic"; |
| reg = <0x40>; |
| |
| /* Mandatory for I/O */ |
| emul { |
| compatible = "sandbox,i2c-pmic"; |
| }; |
| }; |
