|  | /* | 
|  | * (C) Copyright 2001 | 
|  | * Wolfgang Denk, DENX Software Engineering, wd@denx.de. | 
|  | * | 
|  | * SPDX-License-Identifier:	GPL-2.0+ | 
|  | */ | 
|  |  | 
|  | #include <common.h> | 
|  | #include <command.h> | 
|  | #include <ide.h> | 
|  | #include <malloc.h> | 
|  | #include <part.h> | 
|  |  | 
|  | #undef	PART_DEBUG | 
|  |  | 
|  | #ifdef	PART_DEBUG | 
|  | #define	PRINTF(fmt,args...)	printf (fmt ,##args) | 
|  | #else | 
|  | #define PRINTF(fmt,args...) | 
|  | #endif | 
|  |  | 
|  | struct block_drvr { | 
|  | char *name; | 
|  | block_dev_desc_t* (*get_dev)(int dev); | 
|  | }; | 
|  |  | 
|  | static const struct block_drvr block_drvr[] = { | 
|  | #if defined(CONFIG_CMD_IDE) | 
|  | { .name = "ide", .get_dev = ide_get_dev, }, | 
|  | #endif | 
|  | #if defined(CONFIG_CMD_SATA) | 
|  | {.name = "sata", .get_dev = sata_get_dev, }, | 
|  | #endif | 
|  | #if defined(CONFIG_CMD_SCSI) | 
|  | { .name = "scsi", .get_dev = scsi_get_dev, }, | 
|  | #endif | 
|  | #if defined(CONFIG_CMD_USB) && defined(CONFIG_USB_STORAGE) | 
|  | { .name = "usb", .get_dev = usb_stor_get_dev, }, | 
|  | #endif | 
|  | #if defined(CONFIG_MMC) | 
|  | { .name = "mmc", .get_dev = mmc_get_dev, }, | 
|  | #endif | 
|  | #if defined(CONFIG_SYSTEMACE) | 
|  | { .name = "ace", .get_dev = systemace_get_dev, }, | 
|  | #endif | 
|  | { }, | 
|  | }; | 
|  |  | 
|  | DECLARE_GLOBAL_DATA_PTR; | 
|  |  | 
|  | #ifdef HAVE_BLOCK_DEVICE | 
|  | block_dev_desc_t *get_dev(const char *ifname, int dev) | 
|  | { | 
|  | const struct block_drvr *drvr = block_drvr; | 
|  | block_dev_desc_t* (*reloc_get_dev)(int dev); | 
|  | char *name; | 
|  |  | 
|  | if (!ifname) | 
|  | return NULL; | 
|  |  | 
|  | name = drvr->name; | 
|  | #ifdef CONFIG_NEEDS_MANUAL_RELOC | 
|  | name += gd->reloc_off; | 
|  | #endif | 
|  | while (drvr->name) { | 
|  | name = drvr->name; | 
|  | reloc_get_dev = drvr->get_dev; | 
|  | #ifdef CONFIG_NEEDS_MANUAL_RELOC | 
|  | name += gd->reloc_off; | 
|  | reloc_get_dev += gd->reloc_off; | 
|  | #endif | 
|  | if (strncmp(ifname, name, strlen(name)) == 0) | 
|  | return reloc_get_dev(dev); | 
|  | drvr++; | 
|  | } | 
|  | return NULL; | 
|  | } | 
|  | #else | 
|  | block_dev_desc_t *get_dev(const char *ifname, int dev) | 
|  | { | 
|  | return NULL; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | #ifdef HAVE_BLOCK_DEVICE | 
|  |  | 
|  | /* ------------------------------------------------------------------------- */ | 
|  | /* | 
|  | * reports device info to the user | 
|  | */ | 
|  |  | 
|  | #ifdef CONFIG_LBA48 | 
|  | typedef uint64_t lba512_t; | 
|  | #else | 
|  | typedef lbaint_t lba512_t; | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * Overflowless variant of (block_count * mul_by / div_by) | 
|  | * when div_by > mul_by | 
|  | */ | 
|  | static lba512_t lba512_muldiv (lba512_t block_count, lba512_t mul_by, lba512_t div_by) | 
|  | { | 
|  | lba512_t bc_quot, bc_rem; | 
|  |  | 
|  | /* x * m / d == x / d * m + (x % d) * m / d */ | 
|  | bc_quot = block_count / div_by; | 
|  | bc_rem  = block_count - div_by * bc_quot; | 
|  | return bc_quot * mul_by + (bc_rem * mul_by) / div_by; | 
|  | } | 
|  |  | 
|  | void dev_print (block_dev_desc_t *dev_desc) | 
|  | { | 
|  | lba512_t lba512; /* number of blocks if 512bytes block size */ | 
|  |  | 
|  | if (dev_desc->type == DEV_TYPE_UNKNOWN) { | 
|  | puts ("not available\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | switch (dev_desc->if_type) { | 
|  | case IF_TYPE_SCSI: | 
|  | printf ("(%d:%d) Vendor: %s Prod.: %s Rev: %s\n", | 
|  | dev_desc->target,dev_desc->lun, | 
|  | dev_desc->vendor, | 
|  | dev_desc->product, | 
|  | dev_desc->revision); | 
|  | break; | 
|  | case IF_TYPE_ATAPI: | 
|  | case IF_TYPE_IDE: | 
|  | case IF_TYPE_SATA: | 
|  | printf ("Model: %s Firm: %s Ser#: %s\n", | 
|  | dev_desc->vendor, | 
|  | dev_desc->revision, | 
|  | dev_desc->product); | 
|  | break; | 
|  | case IF_TYPE_SD: | 
|  | case IF_TYPE_MMC: | 
|  | case IF_TYPE_USB: | 
|  | printf ("Vendor: %s Rev: %s Prod: %s\n", | 
|  | dev_desc->vendor, | 
|  | dev_desc->revision, | 
|  | dev_desc->product); | 
|  | break; | 
|  | case IF_TYPE_DOC: | 
|  | puts("device type DOC\n"); | 
|  | return; | 
|  | case IF_TYPE_UNKNOWN: | 
|  | puts("device type unknown\n"); | 
|  | return; | 
|  | default: | 
|  | printf("Unhandled device type: %i\n", dev_desc->if_type); | 
|  | return; | 
|  | } | 
|  | puts ("            Type: "); | 
|  | if (dev_desc->removable) | 
|  | puts ("Removable "); | 
|  | switch (dev_desc->type & 0x1F) { | 
|  | case DEV_TYPE_HARDDISK: | 
|  | puts ("Hard Disk"); | 
|  | break; | 
|  | case DEV_TYPE_CDROM: | 
|  | puts ("CD ROM"); | 
|  | break; | 
|  | case DEV_TYPE_OPDISK: | 
|  | puts ("Optical Device"); | 
|  | break; | 
|  | case DEV_TYPE_TAPE: | 
|  | puts ("Tape"); | 
|  | break; | 
|  | default: | 
|  | printf ("# %02X #", dev_desc->type & 0x1F); | 
|  | break; | 
|  | } | 
|  | puts ("\n"); | 
|  | if (dev_desc->lba > 0L && dev_desc->blksz > 0L) { | 
|  | ulong mb, mb_quot, mb_rem, gb, gb_quot, gb_rem; | 
|  | lbaint_t lba; | 
|  |  | 
|  | lba = dev_desc->lba; | 
|  |  | 
|  | lba512 = (lba * (dev_desc->blksz/512)); | 
|  | /* round to 1 digit */ | 
|  | mb = lba512_muldiv(lba512, 10, 2048);	/* 2048 = (1024 * 1024) / 512 MB */ | 
|  |  | 
|  | mb_quot	= mb / 10; | 
|  | mb_rem	= mb - (10 * mb_quot); | 
|  |  | 
|  | gb = mb / 1024; | 
|  | gb_quot	= gb / 10; | 
|  | gb_rem	= gb - (10 * gb_quot); | 
|  | #ifdef CONFIG_LBA48 | 
|  | if (dev_desc->lba48) | 
|  | printf ("            Supports 48-bit addressing\n"); | 
|  | #endif | 
|  | #if defined(CONFIG_SYS_64BIT_LBA) | 
|  | printf ("            Capacity: %ld.%ld MB = %ld.%ld GB (%Ld x %ld)\n", | 
|  | mb_quot, mb_rem, | 
|  | gb_quot, gb_rem, | 
|  | lba, | 
|  | dev_desc->blksz); | 
|  | #else | 
|  | printf ("            Capacity: %ld.%ld MB = %ld.%ld GB (%ld x %ld)\n", | 
|  | mb_quot, mb_rem, | 
|  | gb_quot, gb_rem, | 
|  | (ulong)lba, | 
|  | dev_desc->blksz); | 
|  | #endif | 
|  | } else { | 
|  | puts ("            Capacity: not available\n"); | 
|  | } | 
|  | } | 
|  | #endif | 
|  |  | 
|  | #ifdef HAVE_BLOCK_DEVICE | 
|  |  | 
|  | void init_part (block_dev_desc_t * dev_desc) | 
|  | { | 
|  | #ifdef CONFIG_ISO_PARTITION | 
|  | if (test_part_iso(dev_desc) == 0) { | 
|  | dev_desc->part_type = PART_TYPE_ISO; | 
|  | return; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | #ifdef CONFIG_MAC_PARTITION | 
|  | if (test_part_mac(dev_desc) == 0) { | 
|  | dev_desc->part_type = PART_TYPE_MAC; | 
|  | return; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* must be placed before DOS partition detection */ | 
|  | #ifdef CONFIG_EFI_PARTITION | 
|  | if (test_part_efi(dev_desc) == 0) { | 
|  | dev_desc->part_type = PART_TYPE_EFI; | 
|  | return; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | #ifdef CONFIG_DOS_PARTITION | 
|  | if (test_part_dos(dev_desc) == 0) { | 
|  | dev_desc->part_type = PART_TYPE_DOS; | 
|  | return; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | #ifdef CONFIG_AMIGA_PARTITION | 
|  | if (test_part_amiga(dev_desc) == 0) { | 
|  | dev_desc->part_type = PART_TYPE_AMIGA; | 
|  | return; | 
|  | } | 
|  | #endif | 
|  | dev_desc->part_type = PART_TYPE_UNKNOWN; | 
|  | } | 
|  |  | 
|  |  | 
|  | #if defined(CONFIG_MAC_PARTITION) || \ | 
|  | defined(CONFIG_DOS_PARTITION) || \ | 
|  | defined(CONFIG_ISO_PARTITION) || \ | 
|  | defined(CONFIG_AMIGA_PARTITION) || \ | 
|  | defined(CONFIG_EFI_PARTITION) | 
|  |  | 
|  | static void print_part_header (const char *type, block_dev_desc_t * dev_desc) | 
|  | { | 
|  | puts ("\nPartition Map for "); | 
|  | switch (dev_desc->if_type) { | 
|  | case IF_TYPE_IDE: | 
|  | puts ("IDE"); | 
|  | break; | 
|  | case IF_TYPE_SATA: | 
|  | puts ("SATA"); | 
|  | break; | 
|  | case IF_TYPE_SCSI: | 
|  | puts ("SCSI"); | 
|  | break; | 
|  | case IF_TYPE_ATAPI: | 
|  | puts ("ATAPI"); | 
|  | break; | 
|  | case IF_TYPE_USB: | 
|  | puts ("USB"); | 
|  | break; | 
|  | case IF_TYPE_DOC: | 
|  | puts ("DOC"); | 
|  | break; | 
|  | case IF_TYPE_MMC: | 
|  | puts ("MMC"); | 
|  | break; | 
|  | default: | 
|  | puts ("UNKNOWN"); | 
|  | break; | 
|  | } | 
|  | printf (" device %d  --   Partition Type: %s\n\n", | 
|  | dev_desc->dev, type); | 
|  | } | 
|  |  | 
|  | #endif /* any CONFIG_..._PARTITION */ | 
|  |  | 
|  | void print_part (block_dev_desc_t * dev_desc) | 
|  | { | 
|  |  | 
|  | switch (dev_desc->part_type) { | 
|  | #ifdef CONFIG_MAC_PARTITION | 
|  | case PART_TYPE_MAC: | 
|  | PRINTF ("## Testing for valid MAC partition ##\n"); | 
|  | print_part_header ("MAC", dev_desc); | 
|  | print_part_mac (dev_desc); | 
|  | return; | 
|  | #endif | 
|  | #ifdef CONFIG_DOS_PARTITION | 
|  | case PART_TYPE_DOS: | 
|  | PRINTF ("## Testing for valid DOS partition ##\n"); | 
|  | print_part_header ("DOS", dev_desc); | 
|  | print_part_dos (dev_desc); | 
|  | return; | 
|  | #endif | 
|  |  | 
|  | #ifdef CONFIG_ISO_PARTITION | 
|  | case PART_TYPE_ISO: | 
|  | PRINTF ("## Testing for valid ISO Boot partition ##\n"); | 
|  | print_part_header ("ISO", dev_desc); | 
|  | print_part_iso (dev_desc); | 
|  | return; | 
|  | #endif | 
|  |  | 
|  | #ifdef CONFIG_AMIGA_PARTITION | 
|  | case PART_TYPE_AMIGA: | 
|  | PRINTF ("## Testing for a valid Amiga partition ##\n"); | 
|  | print_part_header ("AMIGA", dev_desc); | 
|  | print_part_amiga (dev_desc); | 
|  | return; | 
|  | #endif | 
|  |  | 
|  | #ifdef CONFIG_EFI_PARTITION | 
|  | case PART_TYPE_EFI: | 
|  | PRINTF ("## Testing for valid EFI partition ##\n"); | 
|  | print_part_header ("EFI", dev_desc); | 
|  | print_part_efi (dev_desc); | 
|  | return; | 
|  | #endif | 
|  | } | 
|  | puts ("## Unknown partition table\n"); | 
|  | } | 
|  |  | 
|  | #endif /* HAVE_BLOCK_DEVICE */ | 
|  |  | 
|  | int get_partition_info(block_dev_desc_t *dev_desc, int part | 
|  | , disk_partition_t *info) | 
|  | { | 
|  | #ifdef HAVE_BLOCK_DEVICE | 
|  |  | 
|  | #ifdef CONFIG_PARTITION_UUIDS | 
|  | /* The common case is no UUID support */ | 
|  | info->uuid[0] = 0; | 
|  | #endif | 
|  |  | 
|  | switch (dev_desc->part_type) { | 
|  | #ifdef CONFIG_MAC_PARTITION | 
|  | case PART_TYPE_MAC: | 
|  | if (get_partition_info_mac(dev_desc, part, info) == 0) { | 
|  | PRINTF("## Valid MAC partition found ##\n"); | 
|  | return 0; | 
|  | } | 
|  | break; | 
|  | #endif | 
|  |  | 
|  | #ifdef CONFIG_DOS_PARTITION | 
|  | case PART_TYPE_DOS: | 
|  | if (get_partition_info_dos(dev_desc, part, info) == 0) { | 
|  | PRINTF("## Valid DOS partition found ##\n"); | 
|  | return 0; | 
|  | } | 
|  | break; | 
|  | #endif | 
|  |  | 
|  | #ifdef CONFIG_ISO_PARTITION | 
|  | case PART_TYPE_ISO: | 
|  | if (get_partition_info_iso(dev_desc, part, info) == 0) { | 
|  | PRINTF("## Valid ISO boot partition found ##\n"); | 
|  | return 0; | 
|  | } | 
|  | break; | 
|  | #endif | 
|  |  | 
|  | #ifdef CONFIG_AMIGA_PARTITION | 
|  | case PART_TYPE_AMIGA: | 
|  | if (get_partition_info_amiga(dev_desc, part, info) == 0) { | 
|  | PRINTF("## Valid Amiga partition found ##\n"); | 
|  | return 0; | 
|  | } | 
|  | break; | 
|  | #endif | 
|  |  | 
|  | #ifdef CONFIG_EFI_PARTITION | 
|  | case PART_TYPE_EFI: | 
|  | if (get_partition_info_efi(dev_desc, part, info) == 0) { | 
|  | PRINTF("## Valid EFI partition found ##\n"); | 
|  | return 0; | 
|  | } | 
|  | break; | 
|  | #endif | 
|  | default: | 
|  | break; | 
|  | } | 
|  | #endif /* HAVE_BLOCK_DEVICE */ | 
|  |  | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | int get_device(const char *ifname, const char *dev_str, | 
|  | block_dev_desc_t **dev_desc) | 
|  | { | 
|  | char *ep; | 
|  | int dev; | 
|  |  | 
|  | dev = simple_strtoul(dev_str, &ep, 16); | 
|  | if (*ep) { | 
|  | printf("** Bad device specification %s %s **\n", | 
|  | ifname, dev_str); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | *dev_desc = get_dev(ifname, dev); | 
|  | if (!(*dev_desc) || ((*dev_desc)->type == DEV_TYPE_UNKNOWN)) { | 
|  | printf("** Bad device %s %s **\n", ifname, dev_str); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | return dev; | 
|  | } | 
|  |  | 
|  | #define PART_UNSPECIFIED -2 | 
|  | #define PART_AUTO -1 | 
|  | #define MAX_SEARCH_PARTITIONS 16 | 
|  | int get_device_and_partition(const char *ifname, const char *dev_part_str, | 
|  | block_dev_desc_t **dev_desc, | 
|  | disk_partition_t *info, int allow_whole_dev) | 
|  | { | 
|  | int ret = -1; | 
|  | const char *part_str; | 
|  | char *dup_str = NULL; | 
|  | const char *dev_str; | 
|  | int dev; | 
|  | char *ep; | 
|  | int p; | 
|  | int part; | 
|  | disk_partition_t tmpinfo; | 
|  |  | 
|  | /* | 
|  | * For now, we have a special case for sandbox, since there is no | 
|  | * real block device support. | 
|  | */ | 
|  | if (0 == strcmp(ifname, "host")) { | 
|  | *dev_desc = NULL; | 
|  | info->start = info->size =  info->blksz = 0; | 
|  | info->bootable = 0; | 
|  | strcpy((char *)info->type, BOOT_PART_TYPE); | 
|  | strcpy((char *)info->name, "Sandbox host"); | 
|  | #ifdef CONFIG_PARTITION_UUIDS | 
|  | info->uuid[0] = 0; | 
|  | #endif | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* If no dev_part_str, use bootdevice environment variable */ | 
|  | if (!dev_part_str || !strlen(dev_part_str) || | 
|  | !strcmp(dev_part_str, "-")) | 
|  | dev_part_str = getenv("bootdevice"); | 
|  |  | 
|  | /* If still no dev_part_str, it's an error */ | 
|  | if (!dev_part_str) { | 
|  | printf("** No device specified **\n"); | 
|  | goto cleanup; | 
|  | } | 
|  |  | 
|  | /* Separate device and partition ID specification */ | 
|  | part_str = strchr(dev_part_str, ':'); | 
|  | if (part_str) { | 
|  | dup_str = strdup(dev_part_str); | 
|  | dup_str[part_str - dev_part_str] = 0; | 
|  | dev_str = dup_str; | 
|  | part_str++; | 
|  | } else { | 
|  | dev_str = dev_part_str; | 
|  | } | 
|  |  | 
|  | /* Look up the device */ | 
|  | dev = get_device(ifname, dev_str, dev_desc); | 
|  | if (dev < 0) | 
|  | goto cleanup; | 
|  |  | 
|  | /* Convert partition ID string to number */ | 
|  | if (!part_str || !*part_str) { | 
|  | part = PART_UNSPECIFIED; | 
|  | } else if (!strcmp(part_str, "auto")) { | 
|  | part = PART_AUTO; | 
|  | } else { | 
|  | /* Something specified -> use exactly that */ | 
|  | part = (int)simple_strtoul(part_str, &ep, 16); | 
|  | /* | 
|  | * Less than whole string converted, | 
|  | * or request for whole device, but caller requires partition. | 
|  | */ | 
|  | if (*ep || (part == 0 && !allow_whole_dev)) { | 
|  | printf("** Bad partition specification %s %s **\n", | 
|  | ifname, dev_part_str); | 
|  | goto cleanup; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * No partition table on device, | 
|  | * or user requested partition 0 (entire device). | 
|  | */ | 
|  | if (((*dev_desc)->part_type == PART_TYPE_UNKNOWN) || | 
|  | (part == 0)) { | 
|  | if (!(*dev_desc)->lba) { | 
|  | printf("** Bad device size - %s %s **\n", ifname, | 
|  | dev_str); | 
|  | goto cleanup; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If user specified a partition ID other than 0, | 
|  | * or the calling command only accepts partitions, | 
|  | * it's an error. | 
|  | */ | 
|  | if ((part > 0) || (!allow_whole_dev)) { | 
|  | printf("** No partition table - %s %s **\n", ifname, | 
|  | dev_str); | 
|  | goto cleanup; | 
|  | } | 
|  |  | 
|  | (*dev_desc)->log2blksz = LOG2((*dev_desc)->blksz); | 
|  |  | 
|  | info->start = 0; | 
|  | info->size = (*dev_desc)->lba; | 
|  | info->blksz = (*dev_desc)->blksz; | 
|  | info->bootable = 0; | 
|  | strcpy((char *)info->type, BOOT_PART_TYPE); | 
|  | strcpy((char *)info->name, "Whole Disk"); | 
|  | #ifdef CONFIG_PARTITION_UUIDS | 
|  | info->uuid[0] = 0; | 
|  | #endif | 
|  |  | 
|  | ret = 0; | 
|  | goto cleanup; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Now there's known to be a partition table, | 
|  | * not specifying a partition means to pick partition 1. | 
|  | */ | 
|  | if (part == PART_UNSPECIFIED) | 
|  | part = 1; | 
|  |  | 
|  | /* | 
|  | * If user didn't specify a partition number, or did specify something | 
|  | * other than "auto", use that partition number directly. | 
|  | */ | 
|  | if (part != PART_AUTO) { | 
|  | ret = get_partition_info(*dev_desc, part, info); | 
|  | if (ret) { | 
|  | printf("** Invalid partition %d **\n", part); | 
|  | goto cleanup; | 
|  | } | 
|  | } else { | 
|  | /* | 
|  | * Find the first bootable partition. | 
|  | * If none are bootable, fall back to the first valid partition. | 
|  | */ | 
|  | part = 0; | 
|  | for (p = 1; p <= MAX_SEARCH_PARTITIONS; p++) { | 
|  | ret = get_partition_info(*dev_desc, p, info); | 
|  | if (ret) | 
|  | continue; | 
|  |  | 
|  | /* | 
|  | * First valid partition, or new better partition? | 
|  | * If so, save partition ID. | 
|  | */ | 
|  | if (!part || info->bootable) | 
|  | part = p; | 
|  |  | 
|  | /* Best possible partition? Stop searching. */ | 
|  | if (info->bootable) | 
|  | break; | 
|  |  | 
|  | /* | 
|  | * We now need to search further for best possible. | 
|  | * If we what we just queried was the best so far, | 
|  | * save the info since we over-write it next loop. | 
|  | */ | 
|  | if (part == p) | 
|  | tmpinfo = *info; | 
|  | } | 
|  | /* If we found any acceptable partition */ | 
|  | if (part) { | 
|  | /* | 
|  | * If we searched all possible partition IDs, | 
|  | * return the first valid partition we found. | 
|  | */ | 
|  | if (p == MAX_SEARCH_PARTITIONS + 1) | 
|  | *info = tmpinfo; | 
|  | } else { | 
|  | printf("** No valid partitions found **\n"); | 
|  | ret = -1; | 
|  | goto cleanup; | 
|  | } | 
|  | } | 
|  | if (strncmp((char *)info->type, BOOT_PART_TYPE, sizeof(info->type)) != 0) { | 
|  | printf("** Invalid partition type \"%.32s\"" | 
|  | " (expect \"" BOOT_PART_TYPE "\")\n", | 
|  | info->type); | 
|  | ret  = -1; | 
|  | goto cleanup; | 
|  | } | 
|  |  | 
|  | (*dev_desc)->log2blksz = LOG2((*dev_desc)->blksz); | 
|  |  | 
|  | ret = part; | 
|  | goto cleanup; | 
|  |  | 
|  | cleanup: | 
|  | free(dup_str); | 
|  | return ret; | 
|  | } |