| /* |
| * (C) Copyright 2008-2009 |
| * BuS Elektronik GmbH & Co. KG <www.bus-elektronik.de> |
| * Jens Scharsig <esw@bus-elektronik.de> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| U-Boot vcxk video controller driver |
| ====================================== |
| |
| By defining CONFIG_VIDEO_VCXK this driver can be used with VC2K, VC4K and |
| VC8K devices on following boards: |
| |
| board | ARCH | Vendor |
| ----------------------------------------------------------------------- |
| EB+CPU5282-T1 | MCF5282 | BuS Elektronik GmbH & Co. KG |
| EB+MCF-EVB123 | MCF5282 | BuS Elektronik GmbH & Co. KG |
| EB+CPUx9K2 | AT91RM9200 | BuS Elektronik GmbH & Co. KG |
| ZLSA | AT91RM9200 | Ruf Telematik AG |
| |
| Driver configuration |
| -------------------- |
| |
| The driver needs some defines to describe the target hardware: |
| |
| CONFIG_SYS_VCXK_BASE |
| |
| base address of VCxK hardware memory |
| |
| CONFIG_SYS_VCXK_DEFAULT_LINEALIGN |
| |
| defines the physical alignment of a pixel row |
| |
| CONFIG_SYS_VCXK_DOUBLEBUFFERED |
| |
| some boards that use vcxk prevent read from framebuffer memory. |
| define this option to enable double buffering (needs 16KiB RAM) |
| |
| CONFIG_SYS_VCXK_<xxxx>_PIN |
| |
| defines the number of the I/O line PIN in the port |
| valid values for <xxxx> are: |
| |
| ACKNOWLEDGE |
| describes the acknowledge line from vcxk hardware |
| |
| ENABLE |
| describes the enable line to vcxk hardware |
| |
| INVERT |
| describes the invert line to vcxk hardware |
| |
| RESET |
| describes the reset line to vcxk hardware |
| |
| REQUEST |
| describes the request line to vcxk hardware |
| |
| CONFIG_SYS_VCXK_<xxxx>_PORT |
| |
| defines the I/O port which is connected with the line |
| for valid values for <xxxx> see CONFIG_SYS_VCXK_<xxxx>_PIN |
| |
| CONFIG_SYS_VCXK_<xxxx>_DDR |
| |
| defines the register which configures the direction |
| for valid values for <xxxx> see CONFIG_SYS_VCXK_<xxxx>_PIN |
