|  | /* | 
|  | * | 
|  | * (C) Copyright 2000-2003 | 
|  | * Wolfgang Denk, DENX Software Engineering, wd@denx.de. | 
|  | * | 
|  | * Copyright (C) 2004-2009 Freescale Semiconductor, Inc. | 
|  | * TsiChung Liew (Tsi-Chung.Liew@freescale.com) | 
|  | * | 
|  | * See file CREDITS for list of people who contributed to this | 
|  | * project. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License as | 
|  | * published by the Free Software Foundation; either version 2 of | 
|  | * the License, or (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | 
|  | * MA 02111-1307 USA | 
|  | */ | 
|  |  | 
|  | #include <common.h> | 
|  | #include <spi.h> | 
|  | #include <malloc.h> | 
|  | #include <asm/immap.h> | 
|  |  | 
|  | struct cf_spi_slave { | 
|  | struct spi_slave slave; | 
|  | uint baudrate; | 
|  | int charbit; | 
|  | }; | 
|  |  | 
|  | int cfspi_xfer(struct spi_slave *slave, uint bitlen, const void *dout, | 
|  | void *din, ulong flags); | 
|  | struct spi_slave *cfspi_setup_slave(struct cf_spi_slave *cfslave, uint mode); | 
|  | void cfspi_init(void); | 
|  | void cfspi_tx(u32 ctrl, u16 data); | 
|  | u16 cfspi_rx(void); | 
|  |  | 
|  | extern void cfspi_port_conf(void); | 
|  | extern int cfspi_claim_bus(uint bus, uint cs); | 
|  | extern void cfspi_release_bus(uint bus, uint cs); | 
|  |  | 
|  | DECLARE_GLOBAL_DATA_PTR; | 
|  |  | 
|  | #ifndef CONFIG_SPI_IDLE_VAL | 
|  | #if defined(CONFIG_SPI_MMC) | 
|  | #define CONFIG_SPI_IDLE_VAL	0xFFFF | 
|  | #else | 
|  | #define CONFIG_SPI_IDLE_VAL	0x0 | 
|  | #endif | 
|  | #endif | 
|  |  | 
|  | #if defined(CONFIG_CF_DSPI) | 
|  | /* DSPI specific mode */ | 
|  | #define SPI_MODE_MOD	0x00200000 | 
|  | #define SPI_DBLRATE	0x00100000 | 
|  |  | 
|  | void cfspi_init(void) | 
|  | { | 
|  | volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI; | 
|  |  | 
|  | cfspi_port_conf();	/* port configuration */ | 
|  |  | 
|  | dspi->mcr = DSPI_MCR_MSTR | DSPI_MCR_CSIS7 | DSPI_MCR_CSIS6 | | 
|  | DSPI_MCR_CSIS5 | DSPI_MCR_CSIS4 | DSPI_MCR_CSIS3 | | 
|  | DSPI_MCR_CSIS2 | DSPI_MCR_CSIS1 | DSPI_MCR_CSIS0 | | 
|  | DSPI_MCR_CRXF | DSPI_MCR_CTXF; | 
|  |  | 
|  | /* Default setting in platform configuration */ | 
|  | #ifdef CONFIG_SYS_DSPI_CTAR0 | 
|  | dspi->ctar[0] = CONFIG_SYS_DSPI_CTAR0; | 
|  | #endif | 
|  | #ifdef CONFIG_SYS_DSPI_CTAR1 | 
|  | dspi->ctar[1] = CONFIG_SYS_DSPI_CTAR1; | 
|  | #endif | 
|  | #ifdef CONFIG_SYS_DSPI_CTAR2 | 
|  | dspi->ctar[2] = CONFIG_SYS_DSPI_CTAR2; | 
|  | #endif | 
|  | #ifdef CONFIG_SYS_DSPI_CTAR3 | 
|  | dspi->ctar[3] = CONFIG_SYS_DSPI_CTAR3; | 
|  | #endif | 
|  | #ifdef CONFIG_SYS_DSPI_CTAR4 | 
|  | dspi->ctar[4] = CONFIG_SYS_DSPI_CTAR4; | 
|  | #endif | 
|  | #ifdef CONFIG_SYS_DSPI_CTAR5 | 
|  | dspi->ctar[5] = CONFIG_SYS_DSPI_CTAR5; | 
|  | #endif | 
|  | #ifdef CONFIG_SYS_DSPI_CTAR6 | 
|  | dspi->ctar[6] = CONFIG_SYS_DSPI_CTAR6; | 
|  | #endif | 
|  | #ifdef CONFIG_SYS_DSPI_CTAR7 | 
|  | dspi->ctar[7] = CONFIG_SYS_DSPI_CTAR7; | 
|  | #endif | 
|  | } | 
|  |  | 
|  | void cfspi_tx(u32 ctrl, u16 data) | 
|  | { | 
|  | volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI; | 
|  |  | 
|  | while ((dspi->sr & 0x0000F000) >= 4) ; | 
|  |  | 
|  | dspi->tfr = (ctrl | data); | 
|  | } | 
|  |  | 
|  | u16 cfspi_rx(void) | 
|  | { | 
|  | volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI; | 
|  |  | 
|  | while ((dspi->sr & 0x000000F0) == 0) ; | 
|  |  | 
|  | return (dspi->rfr & 0xFFFF); | 
|  | } | 
|  |  | 
|  | int cfspi_xfer(struct spi_slave *slave, uint bitlen, const void *dout, | 
|  | void *din, ulong flags) | 
|  | { | 
|  | struct cf_spi_slave *cfslave = (struct cf_spi_slave *)slave; | 
|  | u16 *spi_rd16 = NULL, *spi_wr16 = NULL; | 
|  | u8 *spi_rd = NULL, *spi_wr = NULL; | 
|  | static u32 ctrl = 0; | 
|  | uint len = bitlen >> 3; | 
|  |  | 
|  | if (cfslave->charbit == 16) { | 
|  | bitlen >>= 1; | 
|  | spi_wr16 = (u16 *) dout; | 
|  | spi_rd16 = (u16 *) din; | 
|  | } else { | 
|  | spi_wr = (u8 *) dout; | 
|  | spi_rd = (u8 *) din; | 
|  | } | 
|  |  | 
|  | if ((flags & SPI_XFER_BEGIN) == SPI_XFER_BEGIN) | 
|  | ctrl |= DSPI_TFR_CONT; | 
|  |  | 
|  | ctrl = (ctrl & 0xFF000000) | ((1 << slave->cs) << 16); | 
|  |  | 
|  | if (len > 1) { | 
|  | int tmp_len = len - 1; | 
|  | while (tmp_len--) { | 
|  | if (dout != NULL) { | 
|  | if (cfslave->charbit == 16) | 
|  | cfspi_tx(ctrl, *spi_wr16++); | 
|  | else | 
|  | cfspi_tx(ctrl, *spi_wr++); | 
|  | cfspi_rx(); | 
|  | } | 
|  |  | 
|  | if (din != NULL) { | 
|  | cfspi_tx(ctrl, CONFIG_SPI_IDLE_VAL); | 
|  | if (cfslave->charbit == 16) | 
|  | *spi_rd16++ = cfspi_rx(); | 
|  | else | 
|  | *spi_rd++ = cfspi_rx(); | 
|  | } | 
|  | } | 
|  |  | 
|  | len = 1;	/* remaining byte */ | 
|  | } | 
|  |  | 
|  | if ((flags & SPI_XFER_END) == SPI_XFER_END) | 
|  | ctrl &= ~DSPI_TFR_CONT; | 
|  |  | 
|  | if (len) { | 
|  | if (dout != NULL) { | 
|  | if (cfslave->charbit == 16) | 
|  | cfspi_tx(ctrl, *spi_wr16); | 
|  | else | 
|  | cfspi_tx(ctrl, *spi_wr); | 
|  | cfspi_rx(); | 
|  | } | 
|  |  | 
|  | if (din != NULL) { | 
|  | cfspi_tx(ctrl, CONFIG_SPI_IDLE_VAL); | 
|  | if (cfslave->charbit == 16) | 
|  | *spi_rd16 = cfspi_rx(); | 
|  | else | 
|  | *spi_rd = cfspi_rx(); | 
|  | } | 
|  | } else { | 
|  | /* dummy read */ | 
|  | cfspi_tx(ctrl, CONFIG_SPI_IDLE_VAL); | 
|  | cfspi_rx(); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | struct spi_slave *cfspi_setup_slave(struct cf_spi_slave *cfslave, uint mode) | 
|  | { | 
|  | /* | 
|  | * bit definition for mode: | 
|  | * bit 31 - 28: Transfer size 3 to 16 bits | 
|  | *     27 - 26: PCS to SCK delay prescaler | 
|  | *     25 - 24: After SCK delay prescaler | 
|  | *     23 - 22: Delay after transfer prescaler | 
|  | *     21     : Allow overwrite for bit 31-22 and bit 20-8 | 
|  | *     20     : Double baud rate | 
|  | *     19 - 16: PCS to SCK delay scaler | 
|  | *     15 - 12: After SCK delay scaler | 
|  | *     11 -  8: Delay after transfer scaler | 
|  | *      7 -  0: SPI_CPHA, SPI_CPOL, SPI_LSB_FIRST | 
|  | */ | 
|  | volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI; | 
|  | int prescaler[] = { 2, 3, 5, 7 }; | 
|  | int scaler[] = { | 
|  | 2, 4, 6, 8, | 
|  | 16, 32, 64, 128, | 
|  | 256, 512, 1024, 2048, | 
|  | 4096, 8192, 16384, 32768 | 
|  | }; | 
|  | int i, j, pbrcnt, brcnt, diff, tmp, dbr = 0; | 
|  | int best_i, best_j, bestmatch = 0x7FFFFFFF, baud_speed; | 
|  | u32 bus_setup = 0; | 
|  |  | 
|  | tmp = (prescaler[3] * scaler[15]); | 
|  | /* Maximum and minimum baudrate it can handle */ | 
|  | if ((cfslave->baudrate > (gd->bus_clk >> 1)) || | 
|  | (cfslave->baudrate < (gd->bus_clk / tmp))) { | 
|  | printf("Exceed baudrate limitation: Max %d - Min %d\n", | 
|  | (int)(gd->bus_clk >> 1), (int)(gd->bus_clk / tmp)); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /* Activate Double Baud when it exceed 1/4 the bus clk */ | 
|  | if ((CONFIG_SYS_DSPI_CTAR0 & DSPI_CTAR_DBR) || | 
|  | (cfslave->baudrate > (gd->bus_clk / (prescaler[0] * scaler[0])))) { | 
|  | bus_setup |= DSPI_CTAR_DBR; | 
|  | dbr = 1; | 
|  | } | 
|  |  | 
|  | if (mode & SPI_CPOL) | 
|  | bus_setup |= DSPI_CTAR_CPOL; | 
|  | if (mode & SPI_CPHA) | 
|  | bus_setup |= DSPI_CTAR_CPHA; | 
|  | if (mode & SPI_LSB_FIRST) | 
|  | bus_setup |= DSPI_CTAR_LSBFE; | 
|  |  | 
|  | /* Overwrite default value set in platform configuration file */ | 
|  | if (mode & SPI_MODE_MOD) { | 
|  |  | 
|  | if ((mode & 0xF0000000) == 0) | 
|  | bus_setup |= | 
|  | dspi->ctar[cfslave->slave.bus] & 0x78000000; | 
|  | else | 
|  | bus_setup |= ((mode & 0xF0000000) >> 1); | 
|  |  | 
|  | /* | 
|  | * Check to see if it is enabled by default in platform | 
|  | * config, or manual setting passed by mode parameter | 
|  | */ | 
|  | if (mode & SPI_DBLRATE) { | 
|  | bus_setup |= DSPI_CTAR_DBR; | 
|  | dbr = 1; | 
|  | } | 
|  | bus_setup |= (mode & 0x0FC00000) >> 4;	/* PSCSCK, PASC, PDT */ | 
|  | bus_setup |= (mode & 0x000FFF00) >> 4;	/* CSSCK, ASC, DT */ | 
|  | } else | 
|  | bus_setup |= (dspi->ctar[cfslave->slave.bus] & 0x78FCFFF0); | 
|  |  | 
|  | cfslave->charbit = | 
|  | ((dspi->ctar[cfslave->slave.bus] & 0x78000000) == | 
|  | 0x78000000) ? 16 : 8; | 
|  |  | 
|  | pbrcnt = sizeof(prescaler) / sizeof(int); | 
|  | brcnt = sizeof(scaler) / sizeof(int); | 
|  |  | 
|  | /* baudrate calculation - to closer value, may not be exact match */ | 
|  | for (best_i = 0, best_j = 0, i = 0; i < pbrcnt; i++) { | 
|  | baud_speed = gd->bus_clk / prescaler[i]; | 
|  | for (j = 0; j < brcnt; j++) { | 
|  | tmp = (baud_speed / scaler[j]) * (1 + dbr); | 
|  |  | 
|  | if (tmp > cfslave->baudrate) | 
|  | diff = tmp - cfslave->baudrate; | 
|  | else | 
|  | diff = cfslave->baudrate - tmp; | 
|  |  | 
|  | if (diff < bestmatch) { | 
|  | bestmatch = diff; | 
|  | best_i = i; | 
|  | best_j = j; | 
|  | } | 
|  | } | 
|  | } | 
|  | bus_setup |= (DSPI_CTAR_PBR(best_i) | DSPI_CTAR_BR(best_j)); | 
|  | dspi->ctar[cfslave->slave.bus] = bus_setup; | 
|  |  | 
|  | return &cfslave->slave; | 
|  | } | 
|  | #endif				/* CONFIG_CF_DSPI */ | 
|  |  | 
|  | #ifdef CONFIG_CF_QSPI | 
|  | /* 52xx, 53xx */ | 
|  | #endif				/* CONFIG_CF_QSPI */ | 
|  |  | 
|  | #ifdef CONFIG_CMD_SPI | 
|  | int spi_cs_is_valid(unsigned int bus, unsigned int cs) | 
|  | { | 
|  | if (((cs >= 0) && (cs < 8)) && ((bus >= 0) && (bus < 8))) | 
|  | return 1; | 
|  | else | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void spi_init_f(void) | 
|  | { | 
|  | } | 
|  |  | 
|  | void spi_init_r(void) | 
|  | { | 
|  | } | 
|  |  | 
|  | void spi_init(void) | 
|  | { | 
|  | cfspi_init(); | 
|  | } | 
|  |  | 
|  | struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, | 
|  | unsigned int max_hz, unsigned int mode) | 
|  | { | 
|  | struct cf_spi_slave *cfslave; | 
|  |  | 
|  | if (!spi_cs_is_valid(bus, cs)) | 
|  | return NULL; | 
|  |  | 
|  | cfslave = malloc(sizeof(struct cf_spi_slave)); | 
|  | if (!cfslave) | 
|  | return NULL; | 
|  |  | 
|  | cfslave->slave.bus = bus; | 
|  | cfslave->slave.cs = cs; | 
|  | cfslave->baudrate = max_hz; | 
|  |  | 
|  | /* specific setup */ | 
|  | return cfspi_setup_slave(cfslave, mode); | 
|  | } | 
|  |  | 
|  | void spi_free_slave(struct spi_slave *slave) | 
|  | { | 
|  | free(slave); | 
|  | } | 
|  |  | 
|  | int spi_claim_bus(struct spi_slave *slave) | 
|  | { | 
|  | return cfspi_claim_bus(slave->bus, slave->cs); | 
|  | } | 
|  |  | 
|  | void spi_release_bus(struct spi_slave *slave) | 
|  | { | 
|  | cfspi_release_bus(slave->bus, slave->cs); | 
|  | } | 
|  |  | 
|  | int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, | 
|  | void *din, unsigned long flags) | 
|  | { | 
|  | return cfspi_xfer(slave, bitlen, dout, din, flags); | 
|  | } | 
|  | #endif				/* CONFIG_CMD_SPI */ |