| /* | |
| * Copyright (c) 2016, Fuzhou Rockchip Electronics Co., Ltd | |
| * Author: Zain Wang <zain.wang@rock-chips.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms and conditions of the GNU General Public License, | |
| * version 2, as published by the Free Software Foundation. | |
| * | |
| * Some ideas are from chrome ec and fairchild GPL fusb302 driver. | |
| */ | |
| #ifndef FUSB302_H | |
| #define FUSB302_H | |
| #include <fdtdec.h> | |
| #define FUSB_VCONN_SUPPORT | |
| /* TODO: more modes would be added here later on */ | |
| #define FUSB_HAVE_DRP | |
| #define FUSB_DT_GPIO_INTN "fairchild,int_n" | |
| #define FUSB_DT_GPIO_VBUS_5V "fairchild,vbus5v" | |
| #define FUSB_DT_GPIO_VBUS_OTHER "fairchild,vbusOther" | |
| #define FUSB30X_I2C_DRIVER_NAME "fusb302" | |
| #define FUSB30X_I2C_DEVICETREE_NAME "fairchild,fusb302" | |
| /* FUSB300 Register Addresses */ | |
| #define FUSB_REG_DEVICEID 0x01 | |
| #define FUSB_REG_SWITCHES0 0x02 | |
| #define FUSB_REG_SWITCHES1 0x03 | |
| #define FUSB_REG_MEASURE 0x04 | |
| #define FUSB_REG_SLICE 0x05 | |
| #define FUSB_REG_CONTROL0 0x06 | |
| #define FUSB_REG_CONTROL1 0x07 | |
| #define FUSB_REG_CONTROL2 0x08 | |
| #define FUSB_REG_CONTROL3 0x09 | |
| #define FUSB_REG_MASK 0x0A | |
| #define FUSB_REG_POWER 0x0B | |
| #define FUSB_REG_RESET 0x0C | |
| #define FUSB_REG_OCPREG 0x0D | |
| #define FUSB_REG_MASKA 0x0E | |
| #define FUSB_REG_MASKB 0x0F | |
| #define FUSB_REG_CONTROL4 0x10 | |
| #define FUSB_REG_STATUS0A 0x3C | |
| #define FUSB_REG_STATUS1A 0x3D | |
| #define FUSB_REG_INTERRUPTA 0x3E | |
| #define FUSB_REG_INTERRUPTB 0x3F | |
| #define FUSB_REG_STATUS0 0x40 | |
| #define FUSB_REG_STATUS1 0x41 | |
| #define FUSB_REG_INTERRUPT 0x42 | |
| #define FUSB_REG_FIFO 0x43 | |
| enum connection_state { | |
| disabled = 0, | |
| error_recovery, | |
| unattached, | |
| attach_wait_sink, | |
| attach_wait_source, | |
| attached_source, | |
| attached_sink, | |
| policy_src_startup, | |
| policy_src_send_caps, | |
| policy_src_discovery, | |
| policy_src_negotiate_cap, | |
| policy_src_cap_response, | |
| policy_src_transition_supply, | |
| policy_src_transition_default, | |
| policy_src_ready, | |
| policy_src_get_sink_caps, | |
| policy_src_send_softrst, | |
| policy_src_send_hardrst, | |
| policy_snk_startup, | |
| policy_snk_discovery, | |
| policy_snk_wait_caps, | |
| policy_snk_evaluate_caps, | |
| policy_snk_select_cap, | |
| policy_snk_transition_sink, | |
| policy_snk_ready, | |
| policy_snk_send_softrst, | |
| policy_snk_send_hardrst, | |
| policy_snk_transition_default, | |
| }; | |
| enum tcpm_rp_value { | |
| TYPEC_RP_USB = 0, | |
| TYPEC_RP_1A5 = 1, | |
| TYPEC_RP_3A0 = 2, | |
| TYPEC_RP_RESERVED = 3, | |
| }; | |
| #define SBF(s, v) ((s) << (v)) | |
| #define SWITCHES0_PDWN1 SBF(1, 0) | |
| #define SWITCHES0_PDWN2 SBF(1, 1) | |
| #define SWITCHES0_MEAS_CC1 SBF(1, 2) | |
| #define SWITCHES0_MEAS_CC2 SBF(1, 3) | |
| #define SWITCHES0_VCONN_CC1 SBF(1, 4) | |
| #define SWITCHES0_VCONN_CC2 SBF(1, 5) | |
| #define SWITCHES0_PU_EN1 SBF(1, 6) | |
| #define SWITCHES0_PU_EN2 SBF(1, 7) | |
| #define SWITCHES1_TXCC1 SBF(1, 0) | |
| #define SWITCHES1_TXCC2 SBF(1, 1) | |
| #define SWITCHES1_AUTO_CRC SBF(1, 2) | |
| #define SWITCHES1_DATAROLE SBF(1, 4) | |
| #define SWITCHES1_SPECREV SBF(3, 5) | |
| #define SWITCHES1_POWERROLE SBF(1, 7) | |
| #define MEASURE_MDAC SBF(0x3f, 0) | |
| #define MEASURE_VBUS SBF(1, 6) | |
| #define SLICE_SDAC SBF(0x3f, 0) | |
| #define SLICE_SDAC_HYS SBF(3, 6) | |
| #define CONTROL0_TX_START SBF(1, 0) | |
| #define CONTROL0_AUTO_PRE SBF(1, 1) | |
| #define CONTROL0_HOST_CUR SBF(3, 2) | |
| #define CONTROL0_HOST_CUR_USB SBF(1, 2) | |
| #define CONTROL0_HOST_CUR_1A5 SBF(2, 2) | |
| #define CONTROL0_HOST_CUR_3A0 SBF(3, 2) | |
| #define CONTROL0_INT_MASK SBF(1, 5) | |
| #define CONTROL0_TX_FLUSH SBF(1, 6) | |
| #define CONTROL1_ENSOP1 SBF(1, 0) | |
| #define CONTROL1_ENSOP2 SBF(1, 1) | |
| #define CONTROL1_RX_FLUSH SBF(1, 2) | |
| #define CONTROL1_BIST_MODE2 SBF(1, 4) | |
| #define CONTROL1_ENSOP1DB SBF(1, 5) | |
| #define CONTROL1_ENSOP2DB SBF(1, 6) | |
| #define CONTROL2_TOGGLE SBF(1, 0) | |
| #define CONTROL2_MODE SBF(3, 1) | |
| #define CONTROL2_WAKE_EN SBF(1, 3) | |
| #define CONTROL2_TOG_RD_ONLY SBF(1, 5) | |
| #define CONTROL2_TOG_SAVE_PWR1 SBF(1, 6) | |
| #define CONTROL2_TOG_SAVE_PWR2 SBF(1, 7) | |
| #define CONTROL3_AUTO_RETRY SBF(1, 0) | |
| #define CONTROL3_N_RETRIES SBF(3, 1) | |
| #define CONTROL3_AUTO_SOFTRESET SBF(1, 3) | |
| #define CONTROL3_AUTO_HARDRESET SBF(1, 4) | |
| #define CONTROL3_SEND_HARDRESET SBF(1, 6) | |
| #define MASK_M_BC_LVL SBF(1, 0) | |
| #define MASK_M_COLLISION SBF(1, 1) | |
| #define MASK_M_WAKE SBF(1, 2) | |
| #define MASK_M_ALERT SBF(1, 3) | |
| #define MASK_M_CRC_CHK SBF(1, 4) | |
| #define MASK_M_COMP_CHNG SBF(1, 5) | |
| #define MASK_M_ACTIVITY SBF(1, 6) | |
| #define MASK_M_VBUSOK SBF(1, 7) | |
| #define POWER_PWR SBF(0xf, 0) | |
| #define RESET_SW_RESET SBF(1, 0) | |
| #define RESET_PD_RESET SBF(1, 1) | |
| #define MASKA_M_HARDRST SBF(1, 0) | |
| #define MASKA_M_SOFTRST SBF(1, 1) | |
| #define MASKA_M_TXSENT SBF(1, 2) | |
| #define MASKA_M_HARDSENT SBF(1, 3) | |
| #define MASKA_M_RETRYFAIL SBF(1, 4) | |
| #define MASKA_M_SOFTFAIL SBF(1, 5) | |
| #define MASKA_M_TOGDONE SBF(1, 6) | |
| #define MASKA_M_OCP_TEMP SBF(1, 7) | |
| #define MASKB_M_GCRCSEND SBF(1, 0) | |
| #define CONTROL4_TOG_USRC_EXIT SBF(1, 0) | |
| #define MDAC_1P6V 0x26 | |
| #define STATUS0A_HARDRST SBF(1, 0) | |
| #define STATUS0A_SOFTRST SBF(1, 1) | |
| #define STATUS0A_POWER23 SBF(3, 2) | |
| #define STATUS0A_RETRYFAIL SBF(1, 4) | |
| #define STATUS0A_SOFTFAIL SBF(1, 5) | |
| #define STATUS0A_TOGDONE SBF(1, 6) | |
| #define STATUS0A_M_OCP_TEMP SBF(1, 7) | |
| #define STATUS1A_RXSOP SBF(1, 0) | |
| #define STATUS1A_RXSOP1DB SBF(1, 1) | |
| #define STATUS1A_RXSOP2DB SBF(1, 2) | |
| #define STATUS1A_TOGSS SBF(7, 3) | |
| #define INTERRUPTA_HARDRST SBF(1, 0) | |
| #define INTERRUPTA_SOFTRST SBF(1, 1) | |
| #define INTERRUPTA_TXSENT SBF(1, 2) | |
| #define INTERRUPTA_HARDSENT SBF(1, 3) | |
| #define INTERRUPTA_RETRYFAIL SBF(1, 4) | |
| #define INTERRUPTA_SOFTFAIL SBF(1, 5) | |
| #define INTERRUPTA_TOGDONE SBF(1, 6) | |
| #define INTERRUPTA_OCP_TEMP SBF(1, 7) | |
| #define INTERRUPTB_GCRCSENT SBF(1, 0) | |
| #define STATUS0_BC_LVL SBF(3, 0) | |
| #define STATUS0_WAKE SBF(1, 2) | |
| #define STATUS0_ALERT SBF(1, 3) | |
| #define STATUS0_CRC_CHK SBF(1, 4) | |
| #define STATUS0_COMP SBF(1, 5) | |
| #define STATUS0_ACTIVITY SBF(1, 6) | |
| #define STATUS0_VBUSOK SBF(1, 7) | |
| #define STATUS1_OCP SBF(1, 0) | |
| #define STATUS1_OVRTEMP SBF(1, 1) | |
| #define STATUS1_TX_FULL SBF(1, 2) | |
| #define STATUS1_TX_EMPTY SBF(1, 3) | |
| #define STATUS1_RX_FULL SBF(1, 4) | |
| #define STATUS1_RX_EMPTY SBF(1, 5) | |
| #define STATUS1_RXSOP1 SBF(1, 6) | |
| #define STATUS1_RXSOP2 SBF(1, 7) | |
| #define INTERRUPT_BC_LVL SBF(1, 0) | |
| #define INTERRUPT_COLLISION SBF(1, 1) | |
| #define INTERRUPT_WAKE SBF(1, 2) | |
| #define INTERRUPT_ALERT SBF(1, 3) | |
| #define INTERRUPT_CRC_CHK SBF(1, 4) | |
| #define INTERRUPT_COMP_CHNG SBF(1, 5) | |
| #define INTERRUPT_ACTIVITY SBF(1, 6) | |
| #define INTERRUPT_VBUSOK SBF(1, 7) | |
| #define FUSB_TKN_TXON 0xa1 | |
| #define FUSB_TKN_SYNC1 0x12 | |
| #define FUSB_TKN_SYNC2 0x13 | |
| #define FUSB_TKN_SYNC3 0x1b | |
| #define FUSB_TKN_RST1 0x15 | |
| #define FUSB_TKN_RST2 0x16 | |
| #define FUSB_TKN_PACKSYM 0x80 | |
| #define FUSB_TKN_JAMCRC 0xff | |
| #define FUSB_TKN_EOP 0x14 | |
| #define FUSB_TKN_TXOFF 0xfe | |
| /* USB PD Control Message Types */ | |
| #define CONTROLMESSAGE 0 | |
| #define CMT_GOODCRC 1 | |
| #define CMT_GOTOMIN 2 | |
| #define CMT_ACCEPT 3 | |
| #define CMT_REJECT 4 | |
| #define CMT_PING 5 | |
| #define CMT_PS_RDY 6 | |
| #define CMT_GETSOURCECAP 7 | |
| #define CMT_GETSINKCAP 8 | |
| #define CMT_DR_SWAP 9 | |
| #define CMT_PR_SWAP 10 | |
| #define CMT_VCONN_SWAP 11 | |
| #define CMT_WAIT 12 | |
| #define CMT_SOFTRESET 13 | |
| /* USB PD Data Message Types */ | |
| #define DATAMESSAGE 1 | |
| #define DMT_SOURCECAPABILITIES 1 | |
| #define DMT_REQUEST 2 | |
| #define DMT_BIST 3 | |
| #define DMT_SINKCAPABILITIES 4 | |
| #define DMT_VENDERDEFINED 15 | |
| /* VDM Command Types */ | |
| #define VDM_DISCOVERY_ID 0X01 | |
| #define VDM_DISCOVERY_SVIDS 0X02 | |
| #define VDM_DISCOVERY_MODES 0X03 | |
| #define VDM_ENTER_MODE 0X04 | |
| #define VDM_EXIT_MODE 0X05 | |
| #define VDM_ATTENTION 0X06 | |
| #define VDM_DP_STATUS_UPDATE 0X10 | |
| #define VDM_DP_CONFIG 0X11 | |
| #define VDM_TYPE_INIT 0 | |
| #define VDM_TYPE_ACK 1 | |
| #define VDM_TYPE_NACK 2 | |
| #define VDM_TYPE_BUSY 3 | |
| #define N_DEBOUNCE_CNT (10 - 1) | |
| #define N_CAPS_COUNT 100 | |
| #define N_HARDRESET_COUNT 0 | |
| #define T_NO_RESPONSE 5000 | |
| #define T_SRC_RECOVER 830 | |
| #define T_TYPEC_SEND_SOURCECAP 3 | |
| #define T_SENDER_RESPONSE 30 | |
| #define T_SRC_TRANSITION 30 | |
| #define T_TYPEC_SINK_WAIT_CAP 500 | |
| #define T_PS_TRANSITION 500 | |
| #define T_BMC_TIMEOUT 5 | |
| #define T_PS_HARD_RESET_MAX 35 | |
| #define T_SAFE_0V 650 | |
| #define T_SRC_TURN_ON 275 | |
| #define T_SRC_RECOVER_MAX 1000 | |
| #define T_NO_TRIGGER 500 | |
| #define T_DISABLED 0xffff | |
| #define PD_HEADER_CNT(header) (((header) >> 12) & 7) | |
| #define PD_HEADER_TYPE(header) ((header) & 0xF) | |
| #define PD_HEADER_ID(header) (((header) >> 9) & 7) | |
| #define VDM_HEADER_TYPE(header) (((header) >> 6) & 3) | |
| #define VDMHEAD_CMD_TYPE_MASK (3 << 6) | |
| #define VDMHEAD_CMD_MASK (0x1f << 0) | |
| #define VDMHEAD_STRUCT_TYPE_MASK BIT(15) | |
| #define GET_VDMHEAD_CMD_TYPE(head) ((head & VDMHEAD_CMD_TYPE_MASK) >> 6) | |
| #define GET_VDMHEAD_CMD(head) (head & VDMHEAD_CMD_MASK) | |
| #define GET_VDMHEAD_STRUCT_TYPE(head) ((head & VDMHEAD_STRUCT_TYPE_MASK) >> 15) | |
| #define VDM_IDHEAD_USBVID_MASK (0xffff << 0) | |
| #define VDM_IDHEAD_MODALSUPPORT_MASK BIT(26) | |
| #define VDM_IDHEAD_PRODUCTTYPE (7 << 27) | |
| #define VDM_IDHEAD_USBDEVICE BIT(30) | |
| #define VDM_IDHEAD_USBHOST BIT(30) | |
| #define CAP_POWER_TYPE(PDO) ((PDO >> 30) & 3) | |
| #define CAP_FPDO_VOLTAGE(PDO) ((PDO >> 10) & 0x3ff) | |
| #define CAP_VPDO_VOLTAGE(PDO) ((PDO >> 20) & 0x3ff) | |
| #define CAP_FPDO_CURRENT(PDO) ((PDO >> 0) & 0x3ff) | |
| #define CAP_VPDO_CURRENT(PDO) ((PDO >> 0) & 0x3ff) | |
| enum CC_ORIENTATION { | |
| NONE, | |
| CC1, | |
| CC2, | |
| }; | |
| struct notify_info { | |
| enum CC_ORIENTATION orientation; | |
| /* 0 UFP : 1 DFP */ | |
| bool power_role; | |
| bool data_role; | |
| bool is_cc_connected; | |
| bool is_pd_connected; | |
| bool is_enter_mode; | |
| int pin_assignment_support; | |
| int pin_assignment_def; | |
| bool attention; | |
| }; | |
| enum tx_state { | |
| tx_idle, | |
| tx_busy, | |
| tx_failed, | |
| tx_success | |
| }; | |
| struct PD_CAP_INFO { | |
| u32 peak_current; | |
| u32 specification_revision; | |
| u32 externally_powered; | |
| u32 usb_suspend_support; | |
| u32 usb_communications_cap; | |
| u32 dual_role_power; | |
| u32 data_role_swap; | |
| u32 supply_type; | |
| }; | |
| struct fusb30x_chip { | |
| const char *name; | |
| int node; | |
| bool uboot_charge; | |
| unsigned char bus; | |
| unsigned int addr; | |
| unsigned char *buf; | |
| unsigned char tx_num; | |
| enum connection_state conn_state; | |
| /* 0 UFP : 1 DFP */ | |
| bool power_role; | |
| bool data_role; | |
| bool is_cc_connected; | |
| bool is_pd_connected; | |
| bool is_enter_mode; | |
| int pin_assignment_support; | |
| int pin_assignment_def; | |
| bool attention; | |
| struct PD_CAP_INFO pd_cap_info; | |
| struct fdt_gpio_state gpio_vbus_5v; | |
| struct fdt_gpio_state gpio_discharge; | |
| struct fdt_gpio_state gpio_cc_int; | |
| int gpio_irq; | |
| int timer_state; | |
| int timer_mux; | |
| int port_num; | |
| int work_continue; | |
| int gpio_int_irq; | |
| int enable_irq; | |
| /* | |
| * --------------------------------- | |
| * | role 0x03 << 2, | cc_use 0x03 | | |
| * | src 1 << 2, | cc1 1 | | |
| * | snk 2 << 2, | cc2 2 | | |
| * --------------------------------- | |
| */ | |
| u8 cc_state; | |
| int cc1; | |
| int cc2; | |
| /* 0 cc1 : 1 cc2 */ | |
| bool cc_polarity; | |
| u8 val_tmp; | |
| u8 debounce_cnt; | |
| int sub_state; | |
| int caps_counter; | |
| u32 send_load[7]; | |
| u32 rec_load[7]; | |
| u16 send_head; | |
| u16 rec_head; | |
| int msg_id; | |
| enum tx_state tx_state; | |
| int hardrst_count; | |
| u32 source_power_supply[7]; | |
| /* 50mv unit */ | |
| u32 source_max_current[7]; | |
| /* 10ma uint*/ | |
| int pos_power; | |
| /* | |
| * if PartnerCap[0] == 0xffffffff | |
| * show Partner Device do not support supply | |
| */ | |
| u32 partner_cap[7]; | |
| int n_caps_used; | |
| int vdm_state; | |
| int vdm_substate; | |
| int vdm_send_state; | |
| u32 dp_status; | |
| u16 vdm_svid[12]; | |
| int vdm_svid_num; | |
| u32 vdm_id; | |
| u8 chip_id; | |
| bool vconn_enabled; | |
| int togdone_pullup; | |
| int pd_output_vol; | |
| int pd_output_cur; | |
| int cc_meas_high; | |
| int cc_meas_low; | |
| }; | |
| int fusb302_init(void); | |
| int get_pd_port_num(void); | |
| void typec_discharge(void); | |
| int get_pd_output_val(int *pd_output_vol, int *pd_output_cur); | |
| #endif /* FUSB302_H */ |