|  | /* | 
|  | * (C) Copyright 2003-2004 | 
|  | * Gary Jennejohn, DENX Software Engineering, gj@denx.de. | 
|  | * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com | 
|  | * | 
|  | * See file CREDITS for list of people who contributed to this | 
|  | * project. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License as | 
|  | * published by the Free Software Foundation; either version 2 of | 
|  | * the License, or (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | 
|  | * MA 02111-1307 USA | 
|  | */ | 
|  |  | 
|  | #include <common.h> | 
|  |  | 
|  | #include <command.h> | 
|  | #include <image.h> | 
|  | #include <asm/byteorder.h> | 
|  | #if defined(CONFIG_NAND_LEGACY) | 
|  | #include <linux/mtd/nand_legacy.h> | 
|  | #endif | 
|  | #include <fat.h> | 
|  | #include <part.h> | 
|  |  | 
|  | #include "auto_update.h" | 
|  |  | 
|  | #ifdef CONFIG_AUTO_UPDATE | 
|  |  | 
|  | #if !defined(CONFIG_CMD_FAT) | 
|  | #error "must define CONFIG_CMD_FAT" | 
|  | #endif | 
|  |  | 
|  | extern au_image_t au_image[]; | 
|  | extern int N_AU_IMAGES; | 
|  |  | 
|  | /* where to load files into memory */ | 
|  | #define LOAD_ADDR ((unsigned char *)0x100000) | 
|  | #define MAX_LOADSZ 0x1c00000 | 
|  |  | 
|  | /* externals */ | 
|  | extern int fat_register_device(block_dev_desc_t *, int); | 
|  | extern int file_fat_detectfs(void); | 
|  | extern long file_fat_read(const char *, void *, unsigned long); | 
|  | long do_fat_read (const char *filename, void *buffer, | 
|  | unsigned long maxsize, int dols); | 
|  | extern int flash_sect_erase(ulong, ulong); | 
|  | extern int flash_sect_protect (int, ulong, ulong); | 
|  | extern int flash_write (char *, ulong, ulong); | 
|  |  | 
|  | #if defined(CONFIG_CMD_NAND) && defined(CONFIG_NAND_LEGACY) | 
|  | /* references to names in cmd_nand.c */ | 
|  | #define NANDRW_READ	0x01 | 
|  | #define NANDRW_WRITE	0x00 | 
|  | #define NANDRW_JFFS2	0x02 | 
|  | #define NANDRW_JFFS2_SKIP	0x04 | 
|  | extern struct nand_chip nand_dev_desc[]; | 
|  | extern int nand_legacy_rw(struct nand_chip* nand, int cmd, | 
|  | size_t start, size_t len, | 
|  | size_t * retlen, u_char * buf); | 
|  | extern int nand_legacy_erase(struct nand_chip* nand, size_t ofs, | 
|  | size_t len, int clean); | 
|  | #endif | 
|  |  | 
|  | extern block_dev_desc_t ide_dev_desc[CFG_IDE_MAXDEVICE]; | 
|  |  | 
|  | int au_check_cksum_valid(int i, long nbytes) | 
|  | { | 
|  | image_header_t *hdr; | 
|  |  | 
|  | hdr = (image_header_t *)LOAD_ADDR; | 
|  | #if defined(CONFIG_FIT) | 
|  | if (genimg_get_format ((void *)hdr) != IMAGE_FORMAT_LEGACY) { | 
|  | puts ("Non legacy image format not supported\n"); | 
|  | return -1; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | if ((au_image[i].type == AU_FIRMWARE) && | 
|  | (au_image[i].size != image_get_data_size (hdr))) { | 
|  | printf ("Image %s has wrong size\n", au_image[i].name); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | if (nbytes != (image_get_image_size (hdr))) { | 
|  | printf ("Image %s bad total SIZE\n", au_image[i].name); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | /* check the data CRC */ | 
|  | if (!image_check_dcrc (hdr)) { | 
|  | printf ("Image %s bad data checksum\n", au_image[i].name); | 
|  | return -1; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int au_check_header_valid(int i, long nbytes) | 
|  | { | 
|  | image_header_t *hdr; | 
|  | unsigned long checksum; | 
|  |  | 
|  | hdr = (image_header_t *)LOAD_ADDR; | 
|  | #if defined(CONFIG_FIT) | 
|  | if (genimg_get_format ((void *)hdr) != IMAGE_FORMAT_LEGACY) { | 
|  | puts ("Non legacy image format not supported\n"); | 
|  | return -1; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* check the easy ones first */ | 
|  | if (nbytes < image_get_header_size ()) { | 
|  | printf ("Image %s bad header SIZE\n", au_image[i].name); | 
|  | return -1; | 
|  | } | 
|  | if (!image_check_magic (hdr) || !image_check_arch (hdr, IH_ARCH_PPC)) { | 
|  | printf ("Image %s bad MAGIC or ARCH\n", au_image[i].name); | 
|  | return -1; | 
|  | } | 
|  | if (!image_check_hcrc (hdr)) { | 
|  | printf ("Image %s bad header checksum\n", au_image[i].name); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | /* check the type - could do this all in one gigantic if() */ | 
|  | if (((au_image[i].type & AU_TYPEMASK) == AU_FIRMWARE) && | 
|  | !image_check_type (hdr, IH_TYPE_FIRMWARE)) { | 
|  | printf ("Image %s wrong type\n", au_image[i].name); | 
|  | return -1; | 
|  | } | 
|  | if (((au_image[i].type & AU_TYPEMASK) == AU_SCRIPT) && | 
|  | !image_check_type (hdr, IH_TYPE_SCRIPT)) { | 
|  | printf ("Image %s wrong type\n", au_image[i].name); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | /* recycle checksum */ | 
|  | checksum = image_get_data_size (hdr); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int au_do_update(int i, long sz) | 
|  | { | 
|  | image_header_t *hdr; | 
|  | char *addr; | 
|  | long start, end; | 
|  | int off, rc; | 
|  | uint nbytes; | 
|  | int k; | 
|  | #if defined(CONFIG_CMD_NAND) && defined(CONFIG_NAND_LEGACY) | 
|  | int total; | 
|  | #endif | 
|  |  | 
|  | hdr = (image_header_t *)LOAD_ADDR; | 
|  | #if defined(CONFIG_FIT) | 
|  | if (genimg_get_format ((void *)hdr) != IMAGE_FORMAT_LEGACY) { | 
|  | puts ("Non legacy image format not supported\n"); | 
|  | return -1; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | switch (au_image[i].type & AU_TYPEMASK) { | 
|  | case AU_SCRIPT: | 
|  | printf("Executing script %s\n", au_image[i].name); | 
|  |  | 
|  | /* execute a script */ | 
|  | if (image_check_type (hdr, IH_TYPE_SCRIPT)) { | 
|  | addr = (char *)((char *)hdr + image_get_header_size ()); | 
|  | /* stick a NULL at the end of the script, otherwise */ | 
|  | /* parse_string_outer() runs off the end. */ | 
|  | addr[image_get_data_size (hdr)] = 0; | 
|  | addr += 8; | 
|  |  | 
|  | /* | 
|  | * Replace cr/lf with ; | 
|  | */ | 
|  | k = 0; | 
|  | while (addr[k] != 0) { | 
|  | if ((addr[k] == 10) || (addr[k] == 13)) { | 
|  | addr[k] = ';'; | 
|  | } | 
|  | k++; | 
|  | } | 
|  |  | 
|  | run_command(addr, 0); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | break; | 
|  |  | 
|  | case AU_FIRMWARE: | 
|  | case AU_NOR: | 
|  | case AU_NAND: | 
|  | start = au_image[i].start; | 
|  | end = au_image[i].start + au_image[i].size - 1; | 
|  |  | 
|  | /* | 
|  | * do not update firmware when image is already in flash. | 
|  | */ | 
|  | if (au_image[i].type == AU_FIRMWARE) { | 
|  | char *orig = (char*)start; | 
|  | char *new  = (char *)((char *)hdr + | 
|  | image_get_header_size ()); | 
|  | nbytes = image_get_data_size (hdr); | 
|  |  | 
|  | while (--nbytes) { | 
|  | if (*orig++ != *new++) { | 
|  | break; | 
|  | } | 
|  | } | 
|  | if (!nbytes) { | 
|  | printf ("Skipping firmware update - " | 
|  | "images are identical\n"); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* unprotect the address range */ | 
|  | if (((au_image[i].type & AU_FLAGMASK) == AU_PROTECT) || | 
|  | (au_image[i].type == AU_FIRMWARE)) { | 
|  | flash_sect_protect (0, start, end); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * erase the address range. | 
|  | */ | 
|  | if (au_image[i].type != AU_NAND) { | 
|  | printf ("Updating NOR FLASH with image %s\n", | 
|  | au_image[i].name); | 
|  | debug ("flash_sect_erase(%lx, %lx);\n", start, end); | 
|  | flash_sect_erase (start, end); | 
|  | } else { | 
|  | #if defined(CONFIG_CMD_NAND) && defined(CONFIG_NAND_LEGACY) | 
|  | printf ("Updating NAND FLASH with image %s\n", | 
|  | au_image[i].name); | 
|  | debug ("nand_legacy_erase(%lx, %lx);\n", start, end); | 
|  | rc = nand_legacy_erase (nand_dev_desc, start, | 
|  | end - start + 1, 0); | 
|  | debug ("nand_legacy_erase returned %x\n", rc); | 
|  | #endif | 
|  | } | 
|  |  | 
|  | udelay(10000); | 
|  |  | 
|  | /* strip the header - except for the kernel and ramdisk */ | 
|  | if (au_image[i].type != AU_FIRMWARE) { | 
|  | addr = (char *)hdr; | 
|  | off = image_get_header_size (); | 
|  | nbytes = image_get_image_size (hdr); | 
|  | } else { | 
|  | addr = (char *)((char *)hdr + image_get_header_size ()); | 
|  | off = 0; | 
|  | nbytes = image_get_data_size (hdr); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * copy the data from RAM to FLASH | 
|  | */ | 
|  | if (au_image[i].type != AU_NAND) { | 
|  | debug ("flash_write(%p, %lx, %x)\n", | 
|  | addr, start, nbytes); | 
|  | rc = flash_write ((char *)addr, start, | 
|  | (nbytes + 1) & ~1); | 
|  | } else { | 
|  | #if defined(CONFIG_CMD_NAND) && defined(CONFIG_NAND_LEGACY) | 
|  | debug ("nand_legacy_rw(%p, %lx, %x)\n", | 
|  | addr, start, nbytes); | 
|  | rc = nand_legacy_rw (nand_dev_desc, | 
|  | NANDRW_WRITE | NANDRW_JFFS2, | 
|  | start, nbytes, (size_t *)&total, | 
|  | (uchar *)addr); | 
|  | debug ("nand_legacy_rw: ret=%x total=%d nbytes=%d\n", | 
|  | rc, total, nbytes); | 
|  | #else | 
|  | rc = -1; | 
|  | #endif | 
|  | } | 
|  | if (rc != 0) { | 
|  | printf ("Flashing failed due to error %d\n", rc); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * check the dcrc of the copy | 
|  | */ | 
|  | if (au_image[i].type != AU_NAND) { | 
|  | rc = crc32 (0, (uchar *)(start + off), | 
|  | image_get_data_size (hdr)); | 
|  | } else { | 
|  | #if defined(CONFIG_CMD_NAND) && defined(CONFIG_NAND_LEGACY) | 
|  | rc = nand_legacy_rw (nand_dev_desc, | 
|  | NANDRW_READ | NANDRW_JFFS2 | | 
|  | NANDRW_JFFS2_SKIP, | 
|  | start, nbytes, (size_t *)&total, | 
|  | (uchar *)addr); | 
|  | rc = crc32 (0, (uchar *)(addr + off), | 
|  | image_get_data_size (hdr)); | 
|  | #endif | 
|  | } | 
|  | if (rc != image_get_dcrc (hdr)) { | 
|  | printf ("Image %s Bad Data Checksum After COPY\n", | 
|  | au_image[i].name); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | /* protect the address range */ | 
|  | /* this assumes that ONLY the firmware is protected! */ | 
|  | if (((au_image[i].type & AU_FLAGMASK) == AU_PROTECT) || | 
|  | (au_image[i].type == AU_FIRMWARE)) { | 
|  | flash_sect_protect (1, start, end); | 
|  | } | 
|  |  | 
|  | break; | 
|  |  | 
|  | default: | 
|  | printf("Wrong image type selected!\n"); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void process_macros (const char *input, char *output) | 
|  | { | 
|  | char c, prev; | 
|  | const char *varname_start = NULL; | 
|  | int inputcnt  = strlen (input); | 
|  | int outputcnt = CFG_CBSIZE; | 
|  | int state = 0;	/* 0 = waiting for '$'	*/ | 
|  | /* 1 = waiting for '(' or '{' */ | 
|  | /* 2 = waiting for ')' or '}' */ | 
|  | /* 3 = waiting for '''  */ | 
|  | #ifdef DEBUG_PARSER | 
|  | char *output_start = output; | 
|  |  | 
|  | printf ("[PROCESS_MACROS] INPUT len %d: \"%s\"\n", | 
|  | strlen(input), input); | 
|  | #endif | 
|  |  | 
|  | prev = '\0';			/* previous character */ | 
|  |  | 
|  | while (inputcnt && outputcnt) { | 
|  | c = *input++; | 
|  | inputcnt--; | 
|  |  | 
|  | if (state != 3) { | 
|  | /* remove one level of escape characters */ | 
|  | if ((c == '\\') && (prev != '\\')) { | 
|  | if (inputcnt-- == 0) | 
|  | break; | 
|  | prev = c; | 
|  | c = *input++; | 
|  | } | 
|  | } | 
|  |  | 
|  | switch (state) { | 
|  | case 0:			/* Waiting for (unescaped) $ */ | 
|  | if ((c == '\'') && (prev != '\\')) { | 
|  | state = 3; | 
|  | break; | 
|  | } | 
|  | if ((c == '$') && (prev != '\\')) { | 
|  | state++; | 
|  | } else { | 
|  | *(output++) = c; | 
|  | outputcnt--; | 
|  | } | 
|  | break; | 
|  | case 1:			/* Waiting for ( */ | 
|  | if (c == '(' || c == '{') { | 
|  | state++; | 
|  | varname_start = input; | 
|  | } else { | 
|  | state = 0; | 
|  | *(output++) = '$'; | 
|  | outputcnt--; | 
|  |  | 
|  | if (outputcnt) { | 
|  | *(output++) = c; | 
|  | outputcnt--; | 
|  | } | 
|  | } | 
|  | break; | 
|  | case 2:			/* Waiting for )	*/ | 
|  | if (c == ')' || c == '}') { | 
|  | int i; | 
|  | char envname[CFG_CBSIZE], *envval; | 
|  | /* Varname # of chars */ | 
|  | int envcnt = input - varname_start - 1; | 
|  |  | 
|  | /* Get the varname */ | 
|  | for (i = 0; i < envcnt; i++) { | 
|  | envname[i] = varname_start[i]; | 
|  | } | 
|  | envname[i] = 0; | 
|  |  | 
|  | /* Get its value */ | 
|  | envval = getenv (envname); | 
|  |  | 
|  | /* Copy into the line if it exists */ | 
|  | if (envval != NULL) | 
|  | while ((*envval) && outputcnt) { | 
|  | *(output++) = *(envval++); | 
|  | outputcnt--; | 
|  | } | 
|  | /* Look for another '$' */ | 
|  | state = 0; | 
|  | } | 
|  | break; | 
|  | case 3:			/* Waiting for '	*/ | 
|  | if ((c == '\'') && (prev != '\\')) { | 
|  | state = 0; | 
|  | } else { | 
|  | *(output++) = c; | 
|  | outputcnt--; | 
|  | } | 
|  | break; | 
|  | } | 
|  | prev = c; | 
|  | } | 
|  |  | 
|  | if (outputcnt) | 
|  | *output = 0; | 
|  |  | 
|  | #ifdef DEBUG_PARSER | 
|  | printf ("[PROCESS_MACROS] OUTPUT len %d: \"%s\"\n", | 
|  | strlen (output_start), output_start); | 
|  | #endif | 
|  | } | 
|  |  | 
|  | /* | 
|  | * this is called from board_init() after the hardware has been set up | 
|  | * and is usable. That seems like a good time to do this. | 
|  | * Right now the return value is ignored. | 
|  | */ | 
|  | int do_auto_update(void) | 
|  | { | 
|  | block_dev_desc_t *stor_dev = NULL; | 
|  | long sz; | 
|  | int i, res, cnt, old_ctrlc, got_ctrlc; | 
|  | char buffer[32]; | 
|  | char str[80]; | 
|  | int n; | 
|  |  | 
|  | if  (ide_dev_desc[0].type != DEV_TYPE_UNKNOWN) { | 
|  | stor_dev = get_dev ("ide", 0); | 
|  | if (stor_dev == NULL) { | 
|  | debug ("ide: unknown device\n"); | 
|  | return -1; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (fat_register_device (stor_dev, 1) != 0) { | 
|  | debug ("Unable to register ide disk 0:1\n"); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Check if magic file is present | 
|  | */ | 
|  | if ((n = do_fat_read (AU_MAGIC_FILE, buffer, | 
|  | sizeof(buffer), LS_NO)) <= 0) { | 
|  | debug ("No auto_update magic file (n=%d)\n", n); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_AUTO_UPDATE_SHOW | 
|  | board_auto_update_show (1); | 
|  | #endif | 
|  | puts("\nAutoUpdate Disk detected! Trying to update system...\n"); | 
|  |  | 
|  | /* make sure that we see CTRL-C and save the old state */ | 
|  | old_ctrlc = disable_ctrlc (0); | 
|  |  | 
|  | /* just loop thru all the possible files */ | 
|  | for (i = 0; i < N_AU_IMAGES; i++) { | 
|  | /* | 
|  | * Try to expand the environment var in the fname | 
|  | */ | 
|  | process_macros (au_image[i].name, str); | 
|  | strcpy (au_image[i].name, str); | 
|  |  | 
|  | printf("Reading %s ...", au_image[i].name); | 
|  | /* just read the header */ | 
|  | sz = do_fat_read (au_image[i].name, LOAD_ADDR, | 
|  | image_get_header_size (), LS_NO); | 
|  | debug ("read %s sz %ld hdr %d\n", | 
|  | au_image[i].name, sz, image_get_header_size ()); | 
|  | if (sz <= 0 || sz < image_get_header_size ()) { | 
|  | puts(" not found\n"); | 
|  | continue; | 
|  | } | 
|  | if (au_check_header_valid (i, sz) < 0) { | 
|  | puts(" header not valid\n"); | 
|  | continue; | 
|  | } | 
|  | sz = do_fat_read (au_image[i].name, LOAD_ADDR, | 
|  | MAX_LOADSZ, LS_NO); | 
|  | debug ("read %s sz %ld hdr %d\n", | 
|  | au_image[i].name, sz, image_get_header_size ()); | 
|  | if (sz <= 0 || sz <= image_get_header_size ()) { | 
|  | puts(" not found\n"); | 
|  | continue; | 
|  | } | 
|  | if (au_check_cksum_valid (i, sz) < 0) { | 
|  | puts(" checksum not valid\n"); | 
|  | continue; | 
|  | } | 
|  | puts(" done\n"); | 
|  |  | 
|  | do { | 
|  | res = au_do_update (i, sz); | 
|  | /* let the user break out of the loop */ | 
|  | if (ctrlc() || had_ctrlc ()) { | 
|  | clear_ctrlc (); | 
|  | if (res < 0) | 
|  | got_ctrlc = 1; | 
|  | break; | 
|  | } | 
|  | cnt++; | 
|  | } while (res < 0); | 
|  | } | 
|  |  | 
|  | /* restore the old state */ | 
|  | disable_ctrlc (old_ctrlc); | 
|  |  | 
|  | puts("AutoUpdate finished\n\n"); | 
|  | #ifdef CONFIG_AUTO_UPDATE_SHOW | 
|  | board_auto_update_show (0); | 
|  | #endif | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int auto_update(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) | 
|  | { | 
|  | do_auto_update(); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | U_BOOT_CMD( | 
|  | autoupd,	1,	1,	auto_update, | 
|  | "autoupd - Automatically update images\n", | 
|  | NULL | 
|  | ); | 
|  | #endif /* CONFIG_AUTO_UPDATE */ |