| /* | |
| * (C) Copyright 2008 Semihalf | |
| * | |
| * Written by: Rafal Czubak <rcz@semihalf.com> | |
| * Bartlomiej Sieka <tur@semihalf.com> | |
| * | |
| * See file CREDITS for list of people who contributed to this | |
| * project. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation; either version 2 of | |
| * the License, or (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
| * MA 02111-1307 USA | |
| * | |
| */ | |
| #include <common.h> | |
| #if !(defined(CONFIG_FIT) && defined(CONFIG_OF_LIBFDT)) | |
| #error "CONFIG_FIT and CONFIG_OF_LIBFDT are required for auto-update feature" | |
| #endif | |
| #if defined(CONFIG_SYS_NO_FLASH) | |
| #error "CONFIG_SYS_NO_FLASH defined, but FLASH is required for auto-update feature" | |
| #endif | |
| #include <command.h> | |
| #include <flash.h> | |
| #include <net.h> | |
| #include <malloc.h> | |
| /* env variable holding the location of the update file */ | |
| #define UPDATE_FILE_ENV "updatefile" | |
| /* set configuration defaults if needed */ | |
| #ifndef CONFIG_UPDATE_LOAD_ADDR | |
| #define CONFIG_UPDATE_LOAD_ADDR 0x100000 | |
| #endif | |
| #ifndef CONFIG_UPDATE_TFTP_MSEC_MAX | |
| #define CONFIG_UPDATE_TFTP_MSEC_MAX 100 | |
| #endif | |
| #ifndef CONFIG_UPDATE_TFTP_CNT_MAX | |
| #define CONFIG_UPDATE_TFTP_CNT_MAX 0 | |
| #endif | |
| extern ulong TftpRRQTimeoutMSecs; | |
| extern int TftpRRQTimeoutCountMax; | |
| extern flash_info_t flash_info[]; | |
| extern ulong load_addr; | |
| static uchar *saved_prot_info; | |
| static int update_load(char *filename, ulong msec_max, int cnt_max, ulong addr) | |
| { | |
| int size, rv; | |
| ulong saved_timeout_msecs; | |
| int saved_timeout_count; | |
| char *saved_netretry, *saved_bootfile; | |
| rv = 0; | |
| /* save used globals and env variable */ | |
| saved_timeout_msecs = TftpRRQTimeoutMSecs; | |
| saved_timeout_count = TftpRRQTimeoutCountMax; | |
| saved_netretry = strdup(getenv("netretry")); | |
| saved_bootfile = strdup(BootFile); | |
| /* set timeouts for auto-update */ | |
| TftpRRQTimeoutMSecs = msec_max; | |
| TftpRRQTimeoutCountMax = cnt_max; | |
| /* we don't want to retry the connection if errors occur */ | |
| setenv("netretry", "no"); | |
| /* download the update file */ | |
| load_addr = addr; | |
| copy_filename(BootFile, filename, sizeof(BootFile)); | |
| size = NetLoop(TFTP); | |
| if (size < 0) | |
| rv = 1; | |
| else if (size > 0) | |
| flush_cache(addr, size); | |
| /* restore changed globals and env variable */ | |
| TftpRRQTimeoutMSecs = saved_timeout_msecs; | |
| TftpRRQTimeoutCountMax = saved_timeout_count; | |
| setenv("netretry", saved_netretry); | |
| if (saved_netretry != NULL) | |
| free(saved_netretry); | |
| if (saved_bootfile != NULL) { | |
| copy_filename(BootFile, saved_bootfile, sizeof(BootFile)); | |
| free(saved_bootfile); | |
| } | |
| return rv; | |
| } | |
| static int update_flash_protect(int prot, ulong addr_first, ulong addr_last) | |
| { | |
| uchar *sp_info_ptr; | |
| ulong s; | |
| int i, bank, cnt; | |
| flash_info_t *info; | |
| sp_info_ptr = NULL; | |
| if (prot == 0) { | |
| saved_prot_info = | |
| calloc(CONFIG_SYS_MAX_FLASH_BANKS * CONFIG_SYS_MAX_FLASH_SECT, 1); | |
| if (!saved_prot_info) | |
| return 1; | |
| } | |
| for (bank = 0; bank < CONFIG_SYS_MAX_FLASH_BANKS; ++bank) { | |
| cnt = 0; | |
| info = &flash_info[bank]; | |
| /* Nothing to do if the bank doesn't exist */ | |
| if (info->sector_count == 0) | |
| return 0; | |
| /* Point to current bank protection information */ | |
| sp_info_ptr = saved_prot_info + (bank * CONFIG_SYS_MAX_FLASH_SECT); | |
| /* | |
| * Adjust addr_first or addr_last if we are on bank boundary. | |
| * Address space between banks must be continuous for other | |
| * flash functions (like flash_sect_erase or flash_write) to | |
| * succeed. Banks must also be numbered in correct order, | |
| * according to increasing addresses. | |
| */ | |
| if (addr_last > info->start[0] + info->size - 1) | |
| addr_last = info->start[0] + info->size - 1; | |
| if (addr_first < info->start[0]) | |
| addr_first = info->start[0]; | |
| for (i = 0; i < info->sector_count; i++) { | |
| /* Save current information about protected sectors */ | |
| if (prot == 0) { | |
| s = info->start[i]; | |
| if ((s >= addr_first) && (s <= addr_last)) | |
| sp_info_ptr[i] = info->protect[i]; | |
| } | |
| /* Protect/unprotect sectors */ | |
| if (sp_info_ptr[i] == 1) { | |
| #if defined(CONFIG_SYS_FLASH_PROTECTION) | |
| if (flash_real_protect(info, i, prot)) | |
| return 1; | |
| #else | |
| info->protect[i] = prot; | |
| #endif | |
| cnt++; | |
| } | |
| } | |
| if (cnt) { | |
| printf("%sProtected %d sectors\n", | |
| prot ? "": "Un-", cnt); | |
| } | |
| } | |
| if((prot == 1) && saved_prot_info) | |
| free(saved_prot_info); | |
| return 0; | |
| } | |
| static int update_flash(ulong addr_source, ulong addr_first, ulong size) | |
| { | |
| ulong addr_last = addr_first + size - 1; | |
| /* round last address to the sector boundary */ | |
| if (flash_sect_roundb(&addr_last) > 0) | |
| return 1; | |
| if (addr_first >= addr_last) { | |
| printf("Error: end address exceeds addressing space\n"); | |
| return 1; | |
| } | |
| /* remove protection on processed sectors */ | |
| if (update_flash_protect(0, addr_first, addr_last) > 0) { | |
| printf("Error: could not unprotect flash sectors\n"); | |
| return 1; | |
| } | |
| printf("Erasing 0x%08lx - 0x%08lx", addr_first, addr_last); | |
| if (flash_sect_erase(addr_first, addr_last) > 0) { | |
| printf("Error: could not erase flash\n"); | |
| return 1; | |
| } | |
| printf("Copying to flash..."); | |
| if (flash_write((char *)addr_source, addr_first, size) > 0) { | |
| printf("Error: could not copy to flash\n"); | |
| return 1; | |
| } | |
| printf("done\n"); | |
| /* enable protection on processed sectors */ | |
| if (update_flash_protect(1, addr_first, addr_last) > 0) { | |
| printf("Error: could not protect flash sectors\n"); | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| static int update_fit_getparams(const void *fit, int noffset, ulong *addr, | |
| ulong *fladdr, ulong *size) | |
| { | |
| const void *data; | |
| if (fit_image_get_data(fit, noffset, &data, (size_t *)size)) | |
| return 1; | |
| if (fit_image_get_load(fit, noffset, (ulong *)fladdr)) | |
| return 1; | |
| *addr = (ulong)data; | |
| return 0; | |
| } | |
| void update_tftp(void) | |
| { | |
| char *filename, *env_addr; | |
| int images_noffset, ndepth, noffset; | |
| ulong update_addr, update_fladdr, update_size; | |
| ulong addr; | |
| void *fit; | |
| printf("Auto-update from TFTP: "); | |
| /* get the file name of the update file */ | |
| filename = getenv(UPDATE_FILE_ENV); | |
| if (filename == NULL) { | |
| printf("failed, env. variable '%s' not found\n", | |
| UPDATE_FILE_ENV); | |
| return; | |
| } | |
| printf("trying update file '%s'\n", filename); | |
| /* get load address of downloaded update file */ | |
| if ((env_addr = getenv("loadaddr")) != NULL) | |
| addr = simple_strtoul(env_addr, NULL, 16); | |
| else | |
| addr = CONFIG_UPDATE_LOAD_ADDR; | |
| if (update_load(filename, CONFIG_UPDATE_TFTP_MSEC_MAX, | |
| CONFIG_UPDATE_TFTP_CNT_MAX, addr)) { | |
| printf("Can't load update file, aborting auto-update\n"); | |
| return; | |
| } | |
| fit = (void *)addr; | |
| if (!fit_check_format((void *)fit)) { | |
| printf("Bad FIT format of the update file, aborting " | |
| "auto-update\n"); | |
| return; | |
| } | |
| /* process updates */ | |
| images_noffset = fdt_path_offset(fit, FIT_IMAGES_PATH); | |
| ndepth = 0; | |
| noffset = fdt_next_node(fit, images_noffset, &ndepth); | |
| while (noffset >= 0 && ndepth > 0) { | |
| if (ndepth != 1) | |
| goto next_node; | |
| printf("Processing update '%s' :", | |
| fit_get_name(fit, noffset, NULL)); | |
| if (!fit_image_check_hashes(fit, noffset)) { | |
| printf("Error: invalid update hash, aborting\n"); | |
| goto next_node; | |
| } | |
| printf("\n"); | |
| if (update_fit_getparams(fit, noffset, &update_addr, | |
| &update_fladdr, &update_size)) { | |
| printf("Error: can't get update parameteres, " | |
| "aborting\n"); | |
| goto next_node; | |
| } | |
| if (update_flash(update_addr, update_fladdr, update_size)) { | |
| printf("Error: can't flash update, aborting\n"); | |
| goto next_node; | |
| } | |
| next_node: | |
| noffset = fdt_next_node(fit, noffset, &ndepth); | |
| } | |
| return; | |
| } |