include/configs/ep82xxm.h - u-boot - Git at Google


            
            /*

            
             * Copyright (C) 2006 Embedded Planet, LLC.

            
             *

            
             * U-Boot configuration for Embedded Planet EP82xxM boards.

            
             *

            
             * See file CREDITS for list of people who contributed to this

            
             * project.

            
             *

            
             * This program is free software; you can redistribute it and/or

            
             * modify it under the terms of the GNU General Public License as

            
             * published by the Free Software Foundation; either version 2 of

            
             * the License, or (at your option) any later version.

            
             *

            
             * This program is distributed in the hope that it will be useful,

            
             * but WITHOUT ANY WARRANTY; without even the implied warranty of

            
             * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the

            
             * GNU General Public License for more details.

            
             *

            
             * You should have received a copy of the GNU General Public License

            
             * along with this program; if not, write to the Free Software

            
             * Foundation, Inc., 59 Temple Place, Suite 330, Boston,

            
             * MA 02111-1307 USA

            
             */


            #ifndef __CONFIG_H

            
            #define __CONFIG_H


            #define CONFIG_MPC8260

            
            #define CPU_ID_STR		"MPC8270"


            #define CONFIG_EP82XXM	/* Embedded Planet EP82xxM H 1.0 board */

            
            			/* 256MB SDRAM / 64MB FLASH */


            #define CONFIG_BOARD_EARLY_INIT_F 1	/* Call board_early_init_f */


            /* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */

            
            #define CONFIG_ENV_OVERWRITE


            /*

            
             * Select serial console configuration

            
             *

            
             * If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then

            
             * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4

            
             * for SCC).

            
             */

            
            #define	CONFIG_CONS_ON_SMC		/* Console is on SMC         */

            
            #undef  CONFIG_CONS_ON_SCC		/* It's not on SCC           */

            
            #undef	CONFIG_CONS_NONE		/* It's not on external UART */

            
            #define CONFIG_CONS_INDEX	1	/* SMC1 is used for console  */


            #define CONFIG_SYS_BCSR		0xFA000000


            /*

            
             * Select ethernet configuration

            
             *

            
             * If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected,

            
             * then CONFIG_ETHER_INDEX must be set to the channel number (1-4 for

            
             * SCC, 1-3 for FCC)

            
             *

            
             * If CONFIG_ETHER_NONE is defined, then either the ethernet routines

            
             * must be defined elsewhere (as for the console), or CONFIG_CMD_NET

            
             * must be unset.

            
             */

            
            #undef	CONFIG_ETHER_ON_SCC		/* Ethernet is not on SCC */

            
            #define CONFIG_ETHER_ON_FCC		/* Ethernet is on FCC     */

            
            #undef	CONFIG_ETHER_NONE		/* No external Ethernet   */


            #define CONFIG_NET_MULTI


            #define CONFIG_ETHER_ON_FCC2

            
            #define CONFIG_ETHER_ON_FCC3


            #define CONFIG_SYS_CMXFCR_MASK3	(CMXFCR_FC3 | CMXFCR_RF3CS_MSK | CMXFCR_TF3CS_MSK)

            
            #define CONFIG_SYS_CMXFCR_VALUE3	(CMXFCR_RF3CS_CLK15 | CMXFCR_TF3CS_CLK16)

            
            #define CONFIG_SYS_CMXFCR_MASK2	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)

            
            #define CONFIG_SYS_CMXFCR_VALUE2	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)


            #define CONFIG_SYS_CPMFCR_RAMTYPE	0

            
            #define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)


            #define CONFIG_MII			/* MII PHY management        */

            
            #define CONFIG_BITBANGMII		/* Bit-banged MDIO interface */


            /*

            
             * GPIO pins used for bit-banged MII communications

            
             */

            
            #define MDIO_PORT		0	/* Not used - implemented in BCSR */

            
            #define MDIO_ACTIVE		(*(vu_char *)(CONFIG_SYS_BCSR + 8) &= 0xFB)

            
            #define MDIO_TRISTATE		(*(vu_char *)(CONFIG_SYS_BCSR + 8) |= 0x04)

            
            #define MDIO_READ		(*(vu_char *)(CONFIG_SYS_BCSR + 8) & 1)


            #define MDIO(bit)		if(bit) *(vu_char *)(CONFIG_SYS_BCSR + 8) |= 0x01; \

            
            				else	*(vu_char *)(CONFIG_SYS_BCSR + 8) &= 0xFE


            #define MDC(bit)		if(bit) *(vu_char *)(CONFIG_SYS_BCSR + 8) |= 0x02; \

            
            				else	*(vu_char *)(CONFIG_SYS_BCSR + 8) &= 0xFD


            #define MIIDELAY		udelay(1)


            #ifndef CONFIG_8260_CLKIN

            
            #define CONFIG_8260_CLKIN	66000000 /* in Hz */

            
            #endif


            #define CONFIG_BAUDRATE		115200


            #define CONFIG_SYS_VXWORKS_MAC_PTR 0x4300 /* Pass Ethernet MAC to VxWorks */


            /*

            
             * BOOTP options

            
             */

            
            #define CONFIG_BOOTP_BOOTFILESIZE

            
            #define CONFIG_BOOTP_BOOTPATH

            
            #define CONFIG_BOOTP_GATEWAY

            
            #define CONFIG_BOOTP_HOSTNAME


            /*

            
             * Command line configuration.

            
             */

            
            #include <config_cmd_default.h>


            #define CONFIG_CMD_DHCP

            
            #define CONFIG_CMD_ECHO

            
            #define CONFIG_CMD_I2C

            
            #define CONFIG_CMD_IMMAP

            
            #define CONFIG_CMD_MII

            
            #define CONFIG_CMD_PING

            
            #define CONFIG_CMD_DATE

            
            #define CONFIG_CMD_DTT

            
            #define CONFIG_CMD_EEPROM

            
            #define CONFIG_CMD_PCI

            
            #define CONFIG_CMD_DIAG


            #define CONFIG_ETHADDR		00:10:EC:00:88:65

            
            #define CONFIG_HAS_ETH1

            
            #define CONFIG_ETH1ADDR		00:10:EC:80:88:65

            
            #define CONFIG_IPADDR		10.0.0.245

            
            #define CONFIG_HOSTNAME		EP82xxM

            
            #define CONFIG_SERVERIP		10.0.0.26

            
            #define CONFIG_GATEWAYIP	10.0.0.1

            
            #define CONFIG_NETMASK		255.255.255.0

            
            #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */

            
            #define CONFIG_ENV_IN_OWN_SECT	1

            
            #define CONFIG_AUTO_COMPLETE	1

            
            #define	CONFIG_EXTRA_ENV_SETTINGS	"ethprime=FCC3 ETHERNET"


            #if defined(CONFIG_CMD_KGDB)

            
            #undef	CONFIG_KGDB_ON_SMC		/* define if kgdb on SMC */

            
            #define CONFIG_KGDB_ON_SCC		/* define if kgdb on SCC */

            
            #undef	CONFIG_KGDB_NONE		/* define if kgdb on something else */

            
            #define CONFIG_KGDB_INDEX	1	/* which serial channel for kgdb */

            
            #define CONFIG_KGDB_BAUDRATE	115200	/* speed to run kgdb serial port at */

            
            #endif


            #define CONFIG_BZIP2	/* include support for bzip2 compressed images */

            
            #undef	CONFIG_WATCHDOG			/* disable platform specific watchdog */


            /*

            
             * Miscellaneous configurable options

            
             */

            
            #define CONFIG_SYS_HUSH_PARSER

            
            #define CONFIG_SYS_PROMPT_HUSH_PS2	"> "

            
            #define CONFIG_SYS_LONGHELP			/* undef to save memory	    */

            
            #define CONFIG_SYS_PROMPT		"ep82xxm=> "	/* Monitor Command Prompt   */

            
            #if defined(CONFIG_CMD_KGDB)

            
            #define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */

            
            #else

            
            #define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */

            
            #endif

            
            #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size  */

            
            #define CONFIG_SYS_MAXARGS		16		/* max number of command args */

            
            #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size  */


            #define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */

            
            #define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/


            #define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */


            #define CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks */


            #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }


            /*-----------------------------------------------------------------------

            
             * Environment

            
             *----------------------------------------------------------------------*/

            
            /*

            
             * Define here the location of the environment variables (FLASH or EEPROM).

            
             * Note: DENX encourages to use redundant environment in FLASH.

            
             */

            
            #if 1

            
            #define CONFIG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/

            
            #else

            
            #define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars	*/

            
            #endif


            /*-----------------------------------------------------------------------

            
             * FLASH related

            
             *----------------------------------------------------------------------*/

            
            #define CONFIG_SYS_FLASH_BASE		0xFC000000

            
            #define CONFIG_SYS_FLASH_CFI

            
            #define CONFIG_FLASH_CFI_DRIVER

            
            #define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of flash banks	*/

            
            #define CONFIG_SYS_MAX_FLASH_SECT	512	/* max num of sects on one chip */

            
            #define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector in flinfo */


            #ifdef CONFIG_ENV_IS_IN_FLASH

            
            #define CONFIG_ENV_SECT_SIZE	0x20000

            
            #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)

            
            #endif /* CONFIG_ENV_IS_IN_FLASH */


            /*-----------------------------------------------------------------------

            
             * I2C

            
             *----------------------------------------------------------------------*/

            
            /* EEPROM Configuration */

            
            #define CONFIG_SYS_EEPROM_SIZE	0x1000

            
            #define CONFIG_SYS_I2C_EEPROM_ADDR	0x54

            
            #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1

            
            #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3

            
            #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10


            #ifdef CONFIG_ENV_IS_IN_EEPROM

            
            #define CONFIG_ENV_SIZE		0x200	    /* Size of Environment vars */

            
            #define CONFIG_ENV_OFFSET		0x0

            
            #endif /* CONFIG_ENV_IS_IN_EEPROM */


            /* RTC Configuration */

            
            #define CONFIG_RTC_M41T11	1	/* uses a M41T81 */

            
            #define CONFIG_SYS_I2C_RTC_ADDR	0x68

            
            #define CONFIG_M41T11_BASE_YEAR	1900


            /* I2C SYSMON (LM75) */

            
            #define CONFIG_DTT_LM75		1

            
            #define CONFIG_DTT_SENSORS	{0}

            
            #define CONFIG_SYS_DTT_MAX_TEMP	70

            
            #define CONFIG_SYS_DTT_LOW_TEMP	-30

            
            #define	CONFIG_SYS_DTT_HYSTERESIS	3


            /*-----------------------------------------------------------------------

            
             * NVRAM Configuration

            
             *-----------------------------------------------------------------------

            
             */

            
            #define CONFIG_SYS_NVRAM_BASE_ADDR	0xFA080000

            
            #define CONFIG_SYS_NVRAM_SIZE		(128*1024)-16


            /*-----------------------------------------------------------------------

            
             * PCI stuff

            
             *-----------------------------------------------------------------------

            
             */

            
            /* General PCI */

            
            #define CONFIG_PCI			/* include pci support	        */

            
            #define CONFIG_PCI_PNP			/* do pci plug-and-play   */

            
            #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup  */

            
            #define CONFIG_PCI_BOOTDELAY	0


            /* PCI Memory map (if different from default map */

            
            #define CONFIG_SYS_PCI_SLV_MEM_LOCAL	CONFIG_SYS_SDRAM_BASE		/* Local base */

            
            #define CONFIG_SYS_PCI_SLV_MEM_BUS		0x00000000	/* PCI base */

            
            #define CONFIG_SYS_PICMR0_MASK_ATTRIB	(PICMR_MASK_512MB | PICMR_ENABLE | \

            
            				 PICMR_PREFETCH_EN)


            /*

            
             * These are the windows that allow the CPU to access PCI address space.

            
             * All three PCI master windows, which allow the CPU to access PCI

            
             * prefetch, non prefetch, and IO space (see below), must all fit within

            
             * these windows.

            
             */


            /*

            
             * Master window that allows the CPU to access PCI Memory (prefetch).

            
             * This window will be setup with the second set of Outbound ATU registers

            
             * in the bridge.

            
             */


            #define CONFIG_SYS_PCI_MSTR_MEM_LOCAL	0x80000000          /* Local base */

            
            #define CONFIG_SYS_PCI_MSTR_MEM_BUS	0x80000000          /* PCI base   */

            
            #define	CONFIG_SYS_CPU_PCI_MEM_START	PCI_MSTR_MEM_LOCAL

            
            #define CONFIG_SYS_PCI_MSTR_MEM_SIZE	0x20000000          /* 512MB */

            
            #define CONFIG_SYS_POCMR0_MASK_ATTRIB	(POCMR_MASK_512MB | POCMR_ENABLE | POCMR_PREFETCH_EN)


            /*

            
             * Master window that allows the CPU to access PCI Memory (non-prefetch).

            
             * This window will be setup with the second set of Outbound ATU registers

            
             * in the bridge.

            
             */


            #define CONFIG_SYS_PCI_MSTR_MEMIO_LOCAL    0xA0000000          /* Local base */

            
            #define CONFIG_SYS_PCI_MSTR_MEMIO_BUS      0xA0000000          /* PCI base   */

            
            #define CONFIG_SYS_CPU_PCI_MEMIO_START     PCI_MSTR_MEMIO_LOCAL

            
            #define CONFIG_SYS_PCI_MSTR_MEMIO_SIZE     0x20000000          /* 512MB */

            
            #define CONFIG_SYS_POCMR1_MASK_ATTRIB      (POCMR_MASK_512MB | POCMR_ENABLE)


            /*

            
             * Master window that allows the CPU to access PCI IO space.

            
             * This window will be setup with the first set of Outbound ATU registers

            
             * in the bridge.

            
             */


            #define CONFIG_SYS_PCI_MSTR_IO_LOCAL       0xF6000000          /* Local base */

            
            #define CONFIG_SYS_PCI_MSTR_IO_BUS         0x00000000          /* PCI base   */

            
            #define CONFIG_SYS_CPU_PCI_IO_START        PCI_MSTR_IO_LOCAL

            
            #define CONFIG_SYS_PCI_MSTR_IO_SIZE        0x02000000          /* 64MB */

            
            #define CONFIG_SYS_POCMR2_MASK_ATTRIB      (POCMR_MASK_32MB | POCMR_ENABLE | POCMR_PCI_IO)


            /* PCIBR0 - for PCI IO*/

            
            #define CONFIG_SYS_PCI_MSTR0_LOCAL		CONFIG_SYS_PCI_MSTR_IO_LOCAL		/* Local base */

            
            #define CONFIG_SYS_PCIMSK0_MASK		~(CONFIG_SYS_PCI_MSTR_IO_SIZE - 1U)	/* Size of window */

            
            /* PCIBR1 - prefetch and non-prefetch regions joined together */

            
            #define CONFIG_SYS_PCI_MSTR1_LOCAL		CONFIG_SYS_PCI_MSTR_MEM_LOCAL

            
            #define CONFIG_SYS_PCIMSK1_MASK		~(CONFIG_SYS_PCI_MSTR_MEM_SIZE + CONFIG_SYS_PCI_MSTR_MEMIO_SIZE - 1U)


            #define	CONFIG_SYS_DIRECT_FLASH_TFTP


            #if defined(CONFIG_CMD_JFFS2)

            
            #define CONFIG_SYS_JFFS2_FIRST_BANK	0

            
            #define CONFIG_SYS_JFFS2_NUM_BANKS	CONFIG_SYS_MAX_FLASH_BANKS

            
            #define CONFIG_SYS_JFFS2_FIRST_SECTOR  0

            
            #define CONFIG_SYS_JFFS2_LAST_SECTOR   62

            
            #define CONFIG_SYS_JFFS2_SORT_FRAGMENTS

            
            #define CONFIG_SYS_JFFS_CUSTOM_PART

            
            #endif


            #if defined(CONFIG_CMD_I2C)

            
            #define CONFIG_HARD_I2C		1	/* To enable I2C support	*/

            
            #define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed			*/

            
            #define CONFIG_SYS_I2C_SLAVE		0x7F	/* I2C slave address		*/

            
            #endif


            #define CONFIG_SYS_MONITOR_BASE	TEXT_BASE

            
            #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)

            
            #define CONFIG_SYS_RAMBOOT

            
            #endif


            #define CONFIG_SYS_MONITOR_LEN		(512 << 10)	/* Reserve 256KB for Monitor */


            #define CONFIG_SYS_DEFAULT_IMMR	0x00010000

            
            #define CONFIG_SYS_IMMR		0xF0000000


            #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR

            
            #define CONFIG_SYS_INIT_RAM_END	0x2000	/* End of used area in DPRAM	*/

            
            #define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */

            
            #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)

            
            #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET


            /* Hard reset configuration word */

            
            #define CONFIG_SYS_HRCW_MASTER		0 /*0x1C800641*/  /* Not used - provided by CPLD */

            
            /* No slaves */

            
            #define CONFIG_SYS_HRCW_SLAVE1		0

            
            #define CONFIG_SYS_HRCW_SLAVE2		0

            
            #define CONFIG_SYS_HRCW_SLAVE3		0

            
            #define CONFIG_SYS_HRCW_SLAVE4		0

            
            #define CONFIG_SYS_HRCW_SLAVE5		0

            
            #define CONFIG_SYS_HRCW_SLAVE6		0

            
            #define CONFIG_SYS_HRCW_SLAVE7		0


            #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */

            
            #define BOOTFLAG_WARM		0x02	/* Software reboot                  */


            #define CONFIG_SYS_MALLOC_LEN		(4096 << 10)	/* Reserve 4 MB for malloc()	*/

            
            #define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */


            #define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8260 CPUs */

            
            #if defined(CONFIG_CMD_KGDB)

            
            #define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */

            
            #endif


            #define CONFIG_SYS_HID0_INIT		0

            
            #define CONFIG_SYS_HID0_FINAL		0


            #define CONFIG_SYS_HID2		0


            #define CONFIG_SYS_SIUMCR		0x02610000

            
            #define CONFIG_SYS_SYPCR		0xFFFF0689

            
            #define CONFIG_SYS_BCR			0x8080E000

            
            #define CONFIG_SYS_SCCR		0x00000001


            #define CONFIG_SYS_RMR			0

            
            #define CONFIG_SYS_TMCNTSC		0x000000C3

            
            #define CONFIG_SYS_PISCR		0x00000083

            
            #define CONFIG_SYS_RCCR		0


            #define CONFIG_SYS_MPTPR		0x0A00

            
            #define CONFIG_SYS_PSDMR		0xC432246E

            
            #define CONFIG_SYS_PSRT		0x32


            #define CONFIG_SYS_SDRAM_BASE		0x00000000

            
            #define CONFIG_SYS_SDRAM_BR		(CONFIG_SYS_SDRAM_BASE | 0x00000041)

            
            #define CONFIG_SYS_SDRAM_OR		0xF0002900


            #define CONFIG_SYS_BR0_PRELIM		(CONFIG_SYS_FLASH_BASE | 0x00001801)

            
            #define CONFIG_SYS_OR0_PRELIM		0xFC000882

            
            #define CONFIG_SYS_BR4_PRELIM		(CONFIG_SYS_BCSR | 0x00001001)

            
            #define CONFIG_SYS_OR4_PRELIM		0xFFF00050


            #define CONFIG_SYS_RESET_ADDRESS	0xFFF00100


            #endif /* __CONFIG_H */
	/*
	* Copyright (C) 2006 Embedded Planet, LLC.
	*
	* U-Boot configuration for Embedded Planet EP82xxM boards.
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	#define CONFIG_MPC8260
	#define CPU_ID_STR "MPC8270"

	#define CONFIG_EP82XXM /* Embedded Planet EP82xxM H 1.0 board */
	/* 256MB SDRAM / 64MB FLASH */

	#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */

	/* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */
	#define CONFIG_ENV_OVERWRITE

	/*
	* Select serial console configuration
	*
	* If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
	* CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
	* for SCC).
	*/
	#define CONFIG_CONS_ON_SMC /* Console is on SMC */
	#undef CONFIG_CONS_ON_SCC /* It's not on SCC */
	#undef CONFIG_CONS_NONE /* It's not on external UART */
	#define CONFIG_CONS_INDEX 1 /* SMC1 is used for console */

	#define CONFIG_SYS_BCSR 0xFA000000

	/*
	* Select ethernet configuration
	*
	* If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected,
	* then CONFIG_ETHER_INDEX must be set to the channel number (1-4 for
	* SCC, 1-3 for FCC)
	*
	* If CONFIG_ETHER_NONE is defined, then either the ethernet routines
	* must be defined elsewhere (as for the console), or CONFIG_CMD_NET
	* must be unset.
	*/
	#undef CONFIG_ETHER_ON_SCC /* Ethernet is not on SCC */
	#define CONFIG_ETHER_ON_FCC /* Ethernet is on FCC */
	#undef CONFIG_ETHER_NONE /* No external Ethernet */

	#define CONFIG_NET_MULTI

	#define CONFIG_ETHER_ON_FCC2
	#define CONFIG_ETHER_ON_FCC3

	#define CONFIG_SYS_CMXFCR_MASK3 (CMXFCR_FC3 \| CMXFCR_RF3CS_MSK \| CMXFCR_TF3CS_MSK)
	#define CONFIG_SYS_CMXFCR_VALUE3 (CMXFCR_RF3CS_CLK15 \| CMXFCR_TF3CS_CLK16)
	#define CONFIG_SYS_CMXFCR_MASK2 (CMXFCR_FC2 \| CMXFCR_RF2CS_MSK \| CMXFCR_TF2CS_MSK)
	#define CONFIG_SYS_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK13 \| CMXFCR_TF2CS_CLK14)

	#define CONFIG_SYS_CPMFCR_RAMTYPE 0
	#define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE \| FCC_PSMR_LPB)

	#define CONFIG_MII /* MII PHY management */
	#define CONFIG_BITBANGMII /* Bit-banged MDIO interface */

	/*
	* GPIO pins used for bit-banged MII communications
	*/
	#define MDIO_PORT 0 /* Not used - implemented in BCSR */
	#define MDIO_ACTIVE ((vu_char )(CONFIG_SYS_BCSR + 8) &= 0xFB)
	#define MDIO_TRISTATE ((vu_char )(CONFIG_SYS_BCSR + 8) \|= 0x04)
	#define MDIO_READ ((vu_char )(CONFIG_SYS_BCSR + 8) & 1)

	#define MDIO(bit) if(bit) (vu_char )(CONFIG_SYS_BCSR + 8) \|= 0x01; \
	else (vu_char )(CONFIG_SYS_BCSR + 8) &= 0xFE

	#define MDC(bit) if(bit) (vu_char )(CONFIG_SYS_BCSR + 8) \|= 0x02; \
	else (vu_char )(CONFIG_SYS_BCSR + 8) &= 0xFD

	#define MIIDELAY udelay(1)


	#ifndef CONFIG_8260_CLKIN
	#define CONFIG_8260_CLKIN 66000000 /* in Hz */
	#endif

	#define CONFIG_BAUDRATE 115200

	#define CONFIG_SYS_VXWORKS_MAC_PTR 0x4300 /* Pass Ethernet MAC to VxWorks */


	/*
	* BOOTP options
	*/
	#define CONFIG_BOOTP_BOOTFILESIZE
	#define CONFIG_BOOTP_BOOTPATH
	#define CONFIG_BOOTP_GATEWAY
	#define CONFIG_BOOTP_HOSTNAME


	/*
	* Command line configuration.
	*/
	#include <config_cmd_default.h>


	#define CONFIG_CMD_DHCP
	#define CONFIG_CMD_ECHO
	#define CONFIG_CMD_I2C
	#define CONFIG_CMD_IMMAP
	#define CONFIG_CMD_MII
	#define CONFIG_CMD_PING
	#define CONFIG_CMD_DATE
	#define CONFIG_CMD_DTT
	#define CONFIG_CMD_EEPROM
	#define CONFIG_CMD_PCI
	#define CONFIG_CMD_DIAG


	#define CONFIG_ETHADDR 00:10:EC:00:88:65
	#define CONFIG_HAS_ETH1
	#define CONFIG_ETH1ADDR 00:10:EC:80:88:65
	#define CONFIG_IPADDR 10.0.0.245
	#define CONFIG_HOSTNAME EP82xxM
	#define CONFIG_SERVERIP 10.0.0.26
	#define CONFIG_GATEWAYIP 10.0.0.1
	#define CONFIG_NETMASK 255.255.255.0
	#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
	#define CONFIG_ENV_IN_OWN_SECT 1
	#define CONFIG_AUTO_COMPLETE 1
	#define CONFIG_EXTRA_ENV_SETTINGS "ethprime=FCC3 ETHERNET"

	#if defined(CONFIG_CMD_KGDB)
	#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */
	#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */
	#undef CONFIG_KGDB_NONE /* define if kgdb on something else */
	#define CONFIG_KGDB_INDEX 1 /* which serial channel for kgdb */
	#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */
	#endif

	#define CONFIG_BZIP2 /* include support for bzip2 compressed images */
	#undef CONFIG_WATCHDOG /* disable platform specific watchdog */

	/*
	* Miscellaneous configurable options
	*/
	#define CONFIG_SYS_HUSH_PARSER
	#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	#define CONFIG_SYS_PROMPT "ep82xxm=> " /* Monitor Command Prompt */
	#if defined(CONFIG_CMD_KGDB)
	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
	#else
	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	#endif
	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

	#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
	#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */

	#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */

	#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */

	#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }

	/*-----------------------------------------------------------------------
	* Environment
	----------------------------------------------------------------------/
	/*
	* Define here the location of the environment variables (FLASH or EEPROM).
	* Note: DENX encourages to use redundant environment in FLASH.
	*/
	#if 1
	#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
	#else
	#define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
	#endif

	/*-----------------------------------------------------------------------
	* FLASH related
	----------------------------------------------------------------------/
	#define CONFIG_SYS_FLASH_BASE 0xFC000000
	#define CONFIG_SYS_FLASH_CFI
	#define CONFIG_FLASH_CFI_DRIVER
	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */
	#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */
	#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector in flinfo */

	#ifdef CONFIG_ENV_IS_IN_FLASH
	#define CONFIG_ENV_SECT_SIZE 0x20000
	#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
	#endif /* CONFIG_ENV_IS_IN_FLASH */

	/*-----------------------------------------------------------------------
	* I2C
	----------------------------------------------------------------------/
	/* EEPROM Configuration */
	#define CONFIG_SYS_EEPROM_SIZE 0x1000
	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x54
	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
	#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
	#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10

	#ifdef CONFIG_ENV_IS_IN_EEPROM
	#define CONFIG_ENV_SIZE 0x200 /* Size of Environment vars */
	#define CONFIG_ENV_OFFSET 0x0
	#endif /* CONFIG_ENV_IS_IN_EEPROM */

	/* RTC Configuration */
	#define CONFIG_RTC_M41T11 1 /* uses a M41T81 */
	#define CONFIG_SYS_I2C_RTC_ADDR 0x68
	#define CONFIG_M41T11_BASE_YEAR 1900

	/* I2C SYSMON (LM75) */
	#define CONFIG_DTT_LM75 1
	#define CONFIG_DTT_SENSORS {0}
	#define CONFIG_SYS_DTT_MAX_TEMP 70
	#define CONFIG_SYS_DTT_LOW_TEMP -30
	#define CONFIG_SYS_DTT_HYSTERESIS 3

	/*-----------------------------------------------------------------------
	* NVRAM Configuration
	*-----------------------------------------------------------------------
	*/
	#define CONFIG_SYS_NVRAM_BASE_ADDR 0xFA080000
	#define CONFIG_SYS_NVRAM_SIZE (128*1024)-16


	/*-----------------------------------------------------------------------
	* PCI stuff
	*-----------------------------------------------------------------------
	*/
	/* General PCI */
	#define CONFIG_PCI /* include pci support */
	#define CONFIG_PCI_PNP /* do pci plug-and-play */
	#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
	#define CONFIG_PCI_BOOTDELAY 0

	/* PCI Memory map (if different from default map */
	#define CONFIG_SYS_PCI_SLV_MEM_LOCAL CONFIG_SYS_SDRAM_BASE /* Local base */
	#define CONFIG_SYS_PCI_SLV_MEM_BUS 0x00000000 /* PCI base */
	#define CONFIG_SYS_PICMR0_MASK_ATTRIB (PICMR_MASK_512MB \| PICMR_ENABLE \| \
	PICMR_PREFETCH_EN)

	/*
	* These are the windows that allow the CPU to access PCI address space.
	* All three PCI master windows, which allow the CPU to access PCI
	* prefetch, non prefetch, and IO space (see below), must all fit within
	* these windows.
	*/

	/*
	* Master window that allows the CPU to access PCI Memory (prefetch).
	* This window will be setup with the second set of Outbound ATU registers
	* in the bridge.
	*/

	#define CONFIG_SYS_PCI_MSTR_MEM_LOCAL 0x80000000 /* Local base */
	#define CONFIG_SYS_PCI_MSTR_MEM_BUS 0x80000000 /* PCI base */
	#define CONFIG_SYS_CPU_PCI_MEM_START PCI_MSTR_MEM_LOCAL
	#define CONFIG_SYS_PCI_MSTR_MEM_SIZE 0x20000000 /* 512MB */
	#define CONFIG_SYS_POCMR0_MASK_ATTRIB (POCMR_MASK_512MB \| POCMR_ENABLE \| POCMR_PREFETCH_EN)

	/*
	* Master window that allows the CPU to access PCI Memory (non-prefetch).
	* This window will be setup with the second set of Outbound ATU registers
	* in the bridge.
	*/

	#define CONFIG_SYS_PCI_MSTR_MEMIO_LOCAL 0xA0000000 /* Local base */
	#define CONFIG_SYS_PCI_MSTR_MEMIO_BUS 0xA0000000 /* PCI base */
	#define CONFIG_SYS_CPU_PCI_MEMIO_START PCI_MSTR_MEMIO_LOCAL
	#define CONFIG_SYS_PCI_MSTR_MEMIO_SIZE 0x20000000 /* 512MB */
	#define CONFIG_SYS_POCMR1_MASK_ATTRIB (POCMR_MASK_512MB \| POCMR_ENABLE)

	/*
	* Master window that allows the CPU to access PCI IO space.
	* This window will be setup with the first set of Outbound ATU registers
	* in the bridge.
	*/

	#define CONFIG_SYS_PCI_MSTR_IO_LOCAL 0xF6000000 /* Local base */
	#define CONFIG_SYS_PCI_MSTR_IO_BUS 0x00000000 /* PCI base */
	#define CONFIG_SYS_CPU_PCI_IO_START PCI_MSTR_IO_LOCAL
	#define CONFIG_SYS_PCI_MSTR_IO_SIZE 0x02000000 /* 64MB */
	#define CONFIG_SYS_POCMR2_MASK_ATTRIB (POCMR_MASK_32MB \| POCMR_ENABLE \| POCMR_PCI_IO)


	/* PCIBR0 - for PCI IO*/
	#define CONFIG_SYS_PCI_MSTR0_LOCAL CONFIG_SYS_PCI_MSTR_IO_LOCAL /* Local base */
	#define CONFIG_SYS_PCIMSK0_MASK ~(CONFIG_SYS_PCI_MSTR_IO_SIZE - 1U) /* Size of window */
	/* PCIBR1 - prefetch and non-prefetch regions joined together */
	#define CONFIG_SYS_PCI_MSTR1_LOCAL CONFIG_SYS_PCI_MSTR_MEM_LOCAL
	#define CONFIG_SYS_PCIMSK1_MASK ~(CONFIG_SYS_PCI_MSTR_MEM_SIZE + CONFIG_SYS_PCI_MSTR_MEMIO_SIZE - 1U)


	#define CONFIG_SYS_DIRECT_FLASH_TFTP

	#if defined(CONFIG_CMD_JFFS2)
	#define CONFIG_SYS_JFFS2_FIRST_BANK 0
	#define CONFIG_SYS_JFFS2_NUM_BANKS CONFIG_SYS_MAX_FLASH_BANKS
	#define CONFIG_SYS_JFFS2_FIRST_SECTOR 0
	#define CONFIG_SYS_JFFS2_LAST_SECTOR 62
	#define CONFIG_SYS_JFFS2_SORT_FRAGMENTS
	#define CONFIG_SYS_JFFS_CUSTOM_PART
	#endif

	#if defined(CONFIG_CMD_I2C)
	#define CONFIG_HARD_I2C 1 /* To enable I2C support */
	#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed */
	#define CONFIG_SYS_I2C_SLAVE 0x7F /* I2C slave address */
	#endif

	#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
	#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
	#define CONFIG_SYS_RAMBOOT
	#endif

	#define CONFIG_SYS_MONITOR_LEN (512 << 10) /* Reserve 256KB for Monitor */

	#define CONFIG_SYS_DEFAULT_IMMR 0x00010000
	#define CONFIG_SYS_IMMR 0xF0000000

	#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
	#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in DPRAM */
	#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET


	/* Hard reset configuration word */
	#define CONFIG_SYS_HRCW_MASTER 0 /0x1C800641/ /* Not used - provided by CPLD */
	/* No slaves */
	#define CONFIG_SYS_HRCW_SLAVE1 0
	#define CONFIG_SYS_HRCW_SLAVE2 0
	#define CONFIG_SYS_HRCW_SLAVE3 0
	#define CONFIG_SYS_HRCW_SLAVE4 0
	#define CONFIG_SYS_HRCW_SLAVE5 0
	#define CONFIG_SYS_HRCW_SLAVE6 0
	#define CONFIG_SYS_HRCW_SLAVE7 0

	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
	#define BOOTFLAG_WARM 0x02 /* Software reboot */

	#define CONFIG_SYS_MALLOC_LEN (4096 << 10) /* Reserve 4 MB for malloc() */
	#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */

	#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPUs */
	#if defined(CONFIG_CMD_KGDB)
	#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
	#endif

	#define CONFIG_SYS_HID0_INIT 0
	#define CONFIG_SYS_HID0_FINAL 0

	#define CONFIG_SYS_HID2 0

	#define CONFIG_SYS_SIUMCR 0x02610000
	#define CONFIG_SYS_SYPCR 0xFFFF0689
	#define CONFIG_SYS_BCR 0x8080E000
	#define CONFIG_SYS_SCCR 0x00000001

	#define CONFIG_SYS_RMR 0
	#define CONFIG_SYS_TMCNTSC 0x000000C3
	#define CONFIG_SYS_PISCR 0x00000083
	#define CONFIG_SYS_RCCR 0

	#define CONFIG_SYS_MPTPR 0x0A00
	#define CONFIG_SYS_PSDMR 0xC432246E
	#define CONFIG_SYS_PSRT 0x32

	#define CONFIG_SYS_SDRAM_BASE 0x00000000
	#define CONFIG_SYS_SDRAM_BR (CONFIG_SYS_SDRAM_BASE \| 0x00000041)
	#define CONFIG_SYS_SDRAM_OR 0xF0002900

	#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \| 0x00001801)
	#define CONFIG_SYS_OR0_PRELIM 0xFC000882
	#define CONFIG_SYS_BR4_PRELIM (CONFIG_SYS_BCSR \| 0x00001001)
	#define CONFIG_SYS_OR4_PRELIM 0xFFF00050

	#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100

	#endif /* __CONFIG_H */