| /* | 
 |  * (C) Copyright 2005 | 
 |  * BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de> | 
 |  * | 
 |  * Based On | 
 |  * Wolfgang Denk, DENX Software Engineering, wd@denx.de. | 
 |  * | 
 |  * See file CREDITS for list of people who contributed to this | 
 |  * project. | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or | 
 |  * modify it under the terms of the GNU General Public License as | 
 |  * published by the Free Software Foundation; either version 2 of | 
 |  * the License, or (at your option) any later version. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program; if not, write to the Free Software | 
 |  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | 
 |  * MA 02111-1307 USA | 
 |  */ | 
 |  | 
 | #include <common.h> | 
 | #include  "cfm_flash.h" | 
 |  | 
 | #define PHYS_FLASH_1 CONFIG_SYS_FLASH_BASE | 
 | #define FLASH_BANK_SIZE 0x200000 | 
 |  | 
 | flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; | 
 |  | 
 | void flash_print_info (flash_info_t * info) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	switch (info->flash_id & FLASH_VENDMASK) { | 
 | 	case (AMD_MANUFACT & FLASH_VENDMASK): | 
 | 		printf ("AMD: "); | 
 | 		switch (info->flash_id & FLASH_TYPEMASK) { | 
 | 		case (AMD_ID_LV160B & FLASH_TYPEMASK): | 
 | 			printf ("AM29LV160B (16Bit)\n"); | 
 | 			break; | 
 | 		default: | 
 | 			printf ("Unknown Chip Type\n"); | 
 | 			break; | 
 | 		} | 
 | 		break; | 
 | 	case FREESCALE_MANUFACT & FLASH_VENDMASK: | 
 | 		cfm_flash_print_info (info); | 
 | 		break; | 
 | 	default: | 
 | 		printf ("Unknown Vendor "); | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	puts ("  Size: "); | 
 | 	if ((info->size >> 20) > 0) | 
 | 	{ | 
 | 		printf ("%ld MiB",info->size >> 20); | 
 | 	} | 
 | 	else | 
 | 	{ | 
 | 		printf ("%ld KiB",info->size >> 10); | 
 | 	} | 
 | 	printf (" in %d Sectors\n", info->sector_count); | 
 |  | 
 | 	printf ("  Sector Start Addresses:"); | 
 | 	for (i = 0; i < info->sector_count; i++) { | 
 | 		if ((i % 4) == 0) { | 
 | 			printf ("\n    "); | 
 | 		} | 
 | 		printf ("%02d: %08lX%s  ", i,info->start[i], | 
 | 			info->protect[i] ? " P" : "  "); | 
 | 	} | 
 | 	printf ("\n\n"); | 
 | } | 
 |  | 
 | unsigned long flash_init (void) | 
 | { | 
 | 	int i, j; | 
 | 	ulong size = 0; | 
 |  | 
 | 	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { | 
 | 		ulong flashbase = 0; | 
 |  | 
 | 		switch (i) | 
 | 		{ | 
 | 		case 1: | 
 | 			flash_info[i].flash_id = | 
 | 				(AMD_MANUFACT & FLASH_VENDMASK) | | 
 | 				(AMD_ID_LV160B & FLASH_TYPEMASK); | 
 | 			flash_info[i].size = FLASH_BANK_SIZE; | 
 | 			flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT; | 
 | 			memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT); | 
 | 			flashbase = PHYS_FLASH_1; | 
 | 			for (j = 0; j < flash_info[i].sector_count; j++) { | 
 | 				if (j == 0) { | 
 | 					/* 1st is 16 KiB */ | 
 | 					flash_info[i].start[j] = flashbase; | 
 | 				} | 
 | 				if ((j >= 1) && (j <= 2)) { | 
 | 				/* 2nd and 3rd are 8 KiB */ | 
 | 					flash_info[i].start[j] = | 
 | 						flashbase + 0x4000 + 0x2000 * (j - 1); | 
 | 				} | 
 | 				if (j == 3) { | 
 | 					/* 4th is 32 KiB */ | 
 | 					flash_info[i].start[j] = flashbase + 0x8000; | 
 | 				} | 
 | 				if ((j >= 4) && (j <= 34)) { | 
 | 					/* rest is 256 KiB */ | 
 | 					flash_info[i].start[j] = | 
 | 						flashbase + 0x10000 + 0x10000 * (j - 4); | 
 | 				} | 
 | 			} | 
 | 			break; | 
 | 		case 0: | 
 | 			cfm_flash_init (&flash_info[i]); | 
 | 			break; | 
 | 		default: | 
 | 			panic ("configured to many flash banks!\n"); | 
 | 		} | 
 |  | 
 | 		size += flash_info[i].size; | 
 | 	} | 
 |  | 
 | 	flash_protect (FLAG_PROTECT_SET, | 
 | 		       CONFIG_SYS_FLASH_BASE, | 
 | 		       CONFIG_SYS_FLASH_BASE + 0xffff, &flash_info[0]); | 
 |  | 
 | 	return size; | 
 | } | 
 |  | 
 | #define CMD_READ_ARRAY		0x00F0 | 
 | #define CMD_UNLOCK1		0x00AA | 
 | #define CMD_UNLOCK2		0x0055 | 
 | #define CMD_ERASE_SETUP		0x0080 | 
 | #define CMD_ERASE_CONFIRM	0x0030 | 
 | #define CMD_PROGRAM		0x00A0 | 
 | #define CMD_UNLOCK_BYPASS	0x0020 | 
 |  | 
 | #define MEM_FLASH_ADDR1		(*(volatile u16 *)(info->start[0] + (0x00000555<<1))) | 
 | #define MEM_FLASH_ADDR2		(*(volatile u16 *)(info->start[0] + (0x000002AA<<1))) | 
 |  | 
 |  | 
 | #define BIT_ERASE_DONE		0x0080 | 
 | #define BIT_RDY_MASK		0x0080 | 
 | #define BIT_PROGRAM_ERROR	0x0020 | 
 | #define BIT_TIMEOUT		0x80000000	/* our flag */ | 
 |  | 
 | #define ERR_READY -1 | 
 |  | 
 | int amd_flash_erase_sector(flash_info_t * info, int sector) | 
 | { | 
 | 	int state; | 
 | 	ulong result; | 
 |  | 
 | 	volatile u16 *addr = | 
 | 				(volatile u16 *) (info->start[sector]); | 
 |  | 
 | 	MEM_FLASH_ADDR1 = CMD_UNLOCK1; | 
 | 	MEM_FLASH_ADDR2 = CMD_UNLOCK2; | 
 | 	MEM_FLASH_ADDR1 = CMD_ERASE_SETUP; | 
 |  | 
 | 	MEM_FLASH_ADDR1 = CMD_UNLOCK1; | 
 | 	MEM_FLASH_ADDR2 = CMD_UNLOCK2; | 
 | 	*addr = CMD_ERASE_CONFIRM; | 
 |  | 
 | 	/* wait until flash is ready */ | 
 | 	state = 0; | 
 | 	set_timer (0); | 
 |  | 
 | 	do { | 
 | 		result = *addr; | 
 |  | 
 | 		/* check timeout */ | 
 | 		if (get_timer (0) > CONFIG_SYS_FLASH_ERASE_TOUT) { | 
 | 			MEM_FLASH_ADDR1 = CMD_READ_ARRAY; | 
 | 			state = ERR_TIMOUT; | 
 | 		} | 
 |  | 
 | 		if (!state && (result & 0xFFFF) & BIT_ERASE_DONE) | 
 | 			state = ERR_READY; | 
 | 	} | 
 | 	while (!state); | 
 | 	if (state == ERR_READY) | 
 | 		state = ERR_OK; | 
 |  | 
 | 	MEM_FLASH_ADDR1 = CMD_READ_ARRAY; | 
 |  | 
 | 	return state; | 
 | } | 
 |  | 
 | int flash_erase (flash_info_t * info, int s_first, int s_last) | 
 | { | 
 | 	int iflag, cflag; | 
 | 	int sector; | 
 | 	int rc; | 
 |  | 
 | 	rc = ERR_OK; | 
 |  | 
 | 	if (info->flash_id == FLASH_UNKNOWN) | 
 | 	{ | 
 | 		rc = ERR_UNKNOWN_FLASH_TYPE; | 
 | 	} /* (info->flash_id == FLASH_UNKNOWN) */ | 
 |  | 
 | 	if ((s_first < 0) || (s_first > s_last) || s_last >= info->sector_count) | 
 | 	{ | 
 | 		rc = ERR_INVAL; | 
 | 	} | 
 |  | 
 | 	cflag = icache_status (); | 
 | 	icache_disable (); | 
 | 	iflag = disable_interrupts (); | 
 |  | 
 | 	for (sector = s_first; (sector <= s_last) && (rc == ERR_OK); sector++) { | 
 |  | 
 | 		if (info->protect[sector]) | 
 | 		{ | 
 | 			putc('P'); /*  protected sector will not erase */ | 
 | 		} | 
 | 		else | 
 | 		{ | 
 | 			/* erase on unprotected sector */ | 
 | 			puts("E\b"); | 
 | 			switch (info->flash_id & FLASH_VENDMASK) | 
 | 			{ | 
 | 			case (AMD_MANUFACT & FLASH_VENDMASK): | 
 | 				rc = amd_flash_erase_sector(info,sector); | 
 | 				break; | 
 | 			case (FREESCALE_MANUFACT & FLASH_VENDMASK): | 
 | 				rc = cfm_flash_erase_sector(info,sector); | 
 | 				break; | 
 | 			default: | 
 | 				return ERR_UNKNOWN_FLASH_VENDOR; | 
 | 			} | 
 | 			putc('.'); | 
 | 		} | 
 | 	} | 
 | 	if (rc!=ERR_OK) | 
 | 	{ | 
 | 		printf ("\n   "); | 
 | 		flash_perror (rc); | 
 | 	} | 
 | 	else | 
 | 	{ | 
 | 		printf (" done\n"); | 
 | 	} | 
 |  | 
 | 	udelay (10000);	/* allow flash to settle - wait 10 ms */ | 
 |  | 
 | 	if (iflag) | 
 | 		enable_interrupts (); | 
 |  | 
 | 	if (cflag) | 
 | 		icache_enable (); | 
 |  | 
 | 	return rc; | 
 | } | 
 |  | 
 | volatile static int amd_write_word (flash_info_t * info, ulong dest, u16 data) | 
 | { | 
 | 	volatile u16 *addr; | 
 | 	ulong result; | 
 | 	int cflag, iflag; | 
 | 	int state; | 
 |  | 
 | 	/* | 
 | 	 * Check if Flash is (sufficiently) erased | 
 | 	 */ | 
 | 	addr = (volatile u16 *) dest; | 
 |  | 
 | 	result = *addr; | 
 | 	if ((result & data) != data) | 
 | 		return ERR_NOT_ERASED; | 
 |  | 
 | 	/* | 
 | 	 * Disable interrupts which might cause a timeout | 
 | 	 * here. Remember that our exception vectors are | 
 | 	 * at address 0 in the flash, and we don't want a | 
 | 	 * (ticker) exception to happen while the flash | 
 | 	 * chip is in programming mode. | 
 | 	 */ | 
 |  | 
 | 	cflag = icache_status (); | 
 | 	icache_disable (); | 
 | 	iflag = disable_interrupts (); | 
 |  | 
 | 	MEM_FLASH_ADDR1 = CMD_UNLOCK1; | 
 | 	MEM_FLASH_ADDR2 = CMD_UNLOCK2; | 
 | 	MEM_FLASH_ADDR1 = CMD_PROGRAM; | 
 | 	*addr = data; | 
 |  | 
 | 	/* arm simple, non interrupt dependent timer */ | 
 | 	set_timer (0); | 
 |  | 
 | 	/* wait until flash is ready */ | 
 | 	state = 0; | 
 | 	do { | 
 | 		result = *addr; | 
 |  | 
 | 		/* check timeout */ | 
 | 		if (get_timer (0) > CONFIG_SYS_FLASH_ERASE_TOUT) { | 
 | 				state = ERR_TIMOUT; | 
 | 		} | 
 | 		if (!state && ((result & BIT_RDY_MASK) == (data & BIT_RDY_MASK))) | 
 | 			state = ERR_READY; | 
 |  | 
 | 	} while (!state); | 
 |  | 
 | 	*addr = CMD_READ_ARRAY; | 
 |  | 
 | 	if (state == ERR_READY) | 
 | 		state = ERR_OK; | 
 | 	if ((*addr != data) && (state != ERR_TIMOUT)) | 
 | 		state = ERR_PROG_ERROR; | 
 |  | 
 | 	if (iflag) | 
 | 		enable_interrupts (); | 
 |  | 
 | 	if (cflag) | 
 | 		icache_enable (); | 
 |  | 
 | 	return state; | 
 | } | 
 |  | 
 | int amd_flash_write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) | 
 | { | 
 | 	int rc; | 
 | 	ulong dest; | 
 | 	u16 data; | 
 |  | 
 | 	rc = ERR_OK; | 
 | 	if (addr & 1) | 
 | 	{ | 
 | 		debug ("Byte alignment not supported\n"); | 
 | 		rc = ERR_ALIGN; | 
 | 	} | 
 | 	if (cnt & 1) | 
 | 	{ | 
 | 		debug ("Byte transfer not supported\n"); | 
 | 		rc = ERR_ALIGN; | 
 | 	} | 
 |  | 
 | 	dest = addr; | 
 | 	while ((cnt>=2) && (rc == ERR_OK)) | 
 | 	{ | 
 | 		data = *((volatile u16 *) src); | 
 | 		rc=amd_write_word (info,dest,data); | 
 | 		src +=2; | 
 | 		dest +=2; | 
 | 		cnt -=2; | 
 | 	} | 
 | 	return rc; | 
 | } | 
 |  | 
 | int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) | 
 | { | 
 | 	int rc; | 
 |  | 
 | 	switch (info->flash_id & FLASH_VENDMASK) | 
 | 	{ | 
 | 		case (AMD_MANUFACT & FLASH_VENDMASK): | 
 | 			rc = amd_flash_write_buff(info,src,addr,cnt); | 
 | 			break; | 
 | 		case (FREESCALE_MANUFACT & FLASH_VENDMASK): | 
 | 			rc = cfm_flash_write_buff(info,src,addr,cnt); | 
 | 			break; | 
 | 		default: | 
 | 			rc = ERR_UNKNOWN_FLASH_VENDOR; | 
 | 	} | 
 | 	return rc; | 
 |  | 
 | } | 
 | int amd_flash_protect(flash_info_t * info,long sector,int prot) | 
 | { | 
 | 	int rc; | 
 | 	rc= ERR_OK; | 
 | 	if (prot) | 
 | 	{ | 
 | 		info->protect[sector]=1; | 
 | 	} | 
 | 	else | 
 | 	{ | 
 | 		info->protect[sector]=0; | 
 | 	} | 
 | 	return rc; | 
 | } | 
 |  | 
 | #ifdef CONFIG_SYS_FLASH_PROTECTION | 
 |  | 
 | int flash_real_protect(flash_info_t * info,long sector,int prot) | 
 | { | 
 | 	int rc; | 
 |  | 
 | 	switch (info->flash_id & FLASH_VENDMASK) | 
 | 	{ | 
 | 		case (AMD_MANUFACT & FLASH_VENDMASK): | 
 | 			rc = amd_flash_protect(info,sector,prot); | 
 | 			break; | 
 | 		case (FREESCALE_MANUFACT & FLASH_VENDMASK): | 
 | 			rc = cfm_flash_protect(info,sector,prot); | 
 | 			break; | 
 | 		default: | 
 | 			rc = ERR_UNKNOWN_FLASH_VENDOR; | 
 | 	} | 
 | 	return rc; | 
 | } | 
 |  | 
 | #endif |