|  | /* | 
|  | * (C) Copyright 2006 | 
|  | * Wolfgang Denk, DENX Software Engineering, wd@denx.de. | 
|  | * | 
|  | * See file CREDITS for list of people who contributed to this | 
|  | * project. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License as | 
|  | * published by the Free Software Foundation; either version 2 of | 
|  | * the License, or (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | 
|  | * MA 02111-1307 USA | 
|  | */ | 
|  |  | 
|  | #include <common.h> | 
|  | #include <mpc5xxx.h> | 
|  | #include <asm/processor.h> | 
|  |  | 
|  | #if defined(CONFIG_CAM5200) && defined(CONFIG_CAM5200_NIOSFLASH) | 
|  |  | 
|  | #if 0 | 
|  | #define DEBUGF(x...) printf(x) | 
|  | #else | 
|  | #define DEBUGF(x...) | 
|  | #endif | 
|  |  | 
|  | #define swap16(x) __swab16(x) | 
|  |  | 
|  | flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips */ | 
|  |  | 
|  | /* | 
|  | * CAM5200 is a TQM5200B based board. Additionally it also features | 
|  | * a NIOS cpu. The NIOS CPU peripherals are accessible through MPC5xxx | 
|  | * Local Bus on CS5. This includes 32 bit wide RAM and SRAM as well as | 
|  | * 16 bit wide flash device. Big Endian order on a 32 bit CS5 makes | 
|  | * access to flash chip slightly more complicated as additional byte | 
|  | * swapping is necessary within each 16 bit wide flash 'word'. | 
|  | * | 
|  | * This driver's task is to handle both flash devices: 32 bit TQM5200B | 
|  | * flash chip and 16 bit NIOS cpu flash chip. In the below | 
|  | * flash_addr_table table we use least significant address bit to mark | 
|  | * 16 bit flash bank and two sets of routines *_32 and *_16 to handle | 
|  | * specifics of both flashes. | 
|  | */ | 
|  | static unsigned long flash_addr_table[][CFG_MAX_FLASH_BANKS] = { | 
|  | {CFG_BOOTCS_START, CFG_CS5_START | 1} | 
|  | }; | 
|  |  | 
|  | /*----------------------------------------------------------------------- | 
|  | * Functions | 
|  | */ | 
|  | static int write_word(flash_info_t * info, ulong dest, ulong data); | 
|  | #ifdef CFG_FLASH_2ND_16BIT_DEV | 
|  | static int write_word_32(flash_info_t * info, ulong dest, ulong data); | 
|  | static int write_word_16(flash_info_t * info, ulong dest, ulong data); | 
|  | static int flash_erase_32(flash_info_t * info, int s_first, int s_last); | 
|  | static int flash_erase_16(flash_info_t * info, int s_first, int s_last); | 
|  | static ulong flash_get_size_32(vu_long * addr, flash_info_t * info); | 
|  | static ulong flash_get_size_16(vu_long * addr, flash_info_t * info); | 
|  | #endif | 
|  |  | 
|  | void flash_print_info(flash_info_t * info) | 
|  | { | 
|  | int i, k; | 
|  | int size, erased; | 
|  | volatile unsigned long *flash; | 
|  |  | 
|  | if (info->flash_id == FLASH_UNKNOWN) { | 
|  | printf("missing or unknown FLASH type\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | switch (info->flash_id & FLASH_VENDMASK) { | 
|  | case FLASH_MAN_AMD: | 
|  | printf("AMD "); | 
|  | break; | 
|  | case FLASH_MAN_FUJ: | 
|  | printf("FUJITSU "); | 
|  | break; | 
|  | default: | 
|  | printf("Unknown Vendor "); | 
|  | break; | 
|  | } | 
|  |  | 
|  | switch (info->flash_id & FLASH_TYPEMASK) { | 
|  | case FLASH_S29GL128N: | 
|  | printf ("S29GL128N (256 Mbit, uniform sector size)\n"); | 
|  | break; | 
|  | case FLASH_AM320B: | 
|  | printf ("29LV320B (32 Mbit, bottom boot sect)\n"); | 
|  | break; | 
|  | case FLASH_AM320T: | 
|  | printf ("29LV320T (32 Mbit, top boot sect)\n"); | 
|  | break; | 
|  | default: | 
|  | printf("Unknown Chip Type\n"); | 
|  | break; | 
|  | } | 
|  |  | 
|  | printf("  Size: %ld KB in %d Sectors\n", | 
|  | info->size >> 10, info->sector_count); | 
|  |  | 
|  | printf("  Sector Start Addresses:"); | 
|  | for (i = 0; i < info->sector_count; ++i) { | 
|  | /* | 
|  | * Check if whole sector is erased | 
|  | */ | 
|  | if (i != (info->sector_count - 1)) | 
|  | size = info->start[i + 1] - info->start[i]; | 
|  | else | 
|  | size = info->start[0] + info->size - info->start[i]; | 
|  |  | 
|  | erased = 1; | 
|  | flash = (volatile unsigned long *)info->start[i]; | 
|  | size = size >> 2;	/* divide by 4 for longword access */ | 
|  |  | 
|  | for (k = 0; k < size; k++) { | 
|  | if (*flash++ != 0xffffffff) { | 
|  | erased = 0; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if ((i % 5) == 0) | 
|  | printf("\n   "); | 
|  |  | 
|  | printf(" %08lX%s%s", info->start[i], | 
|  | erased ? " E" : "  ", | 
|  | info->protect[i] ? "RO " : "   "); | 
|  | } | 
|  | printf("\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * The following code cannot be run from FLASH! | 
|  | */ | 
|  | #ifdef CFG_FLASH_2ND_16BIT_DEV | 
|  | static ulong flash_get_size(vu_long * addr, flash_info_t * info) | 
|  | { | 
|  |  | 
|  | DEBUGF("get_size: FLASH ADDR %08lx\n", addr); | 
|  |  | 
|  | /* bit 0 used for big flash marking */ | 
|  | if ((ulong)addr & 0x1) | 
|  | return flash_get_size_16((vu_long *)((ulong)addr & 0xfffffffe), info); | 
|  | else | 
|  | return flash_get_size_32(addr, info); | 
|  | } | 
|  |  | 
|  | static ulong flash_get_size_32(vu_long * addr, flash_info_t * info) | 
|  | #else | 
|  | static ulong flash_get_size(vu_long * addr, flash_info_t * info) | 
|  | #endif | 
|  | { | 
|  | short i; | 
|  | CFG_FLASH_WORD_SIZE value; | 
|  | ulong base = (ulong) addr; | 
|  | volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr; | 
|  |  | 
|  | DEBUGF("get_size32: FLASH ADDR: %08x\n", (unsigned)addr); | 
|  |  | 
|  | /* Write auto select command: read Manufacturer ID */ | 
|  | addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; | 
|  | addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; | 
|  | addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00900090; | 
|  | udelay(1000); | 
|  |  | 
|  | value = addr2[0]; | 
|  | DEBUGF("FLASH MANUFACT: %x\n", value); | 
|  |  | 
|  | switch (value) { | 
|  | case (CFG_FLASH_WORD_SIZE) AMD_MANUFACT: | 
|  | info->flash_id = FLASH_MAN_AMD; | 
|  | break; | 
|  | default: | 
|  | info->flash_id = FLASH_UNKNOWN; | 
|  | info->sector_count = 0; | 
|  | info->size = 0; | 
|  | return (0);	/* no or unknown flash  */ | 
|  | } | 
|  |  | 
|  | value = addr2[1];	/* device ID            */ | 
|  | DEBUGF("\nFLASH DEVICEID: %x\n", value); | 
|  |  | 
|  | switch (value) { | 
|  | case AMD_ID_MIRROR: | 
|  | DEBUGF("Mirror Bit flash: addr[14] = %08lX  addr[15] = %08lX\n", | 
|  | addr[14], addr[15]); | 
|  | switch(addr[14]) { | 
|  | case AMD_ID_GL128N_2: | 
|  | if (addr[15] != AMD_ID_GL128N_3) { | 
|  | DEBUGF("Chip: S29GL128N -> unknown\n"); | 
|  | info->flash_id = FLASH_UNKNOWN; | 
|  | } else { | 
|  | DEBUGF("Chip: S29GL128N\n"); | 
|  | info->flash_id += FLASH_S29GL128N; | 
|  | info->sector_count = 128; | 
|  | info->size = 0x02000000; | 
|  | } | 
|  | break; | 
|  | default: | 
|  | info->flash_id = FLASH_UNKNOWN; | 
|  | return(0); | 
|  | } | 
|  | break; | 
|  |  | 
|  | default: | 
|  | info->flash_id = FLASH_UNKNOWN; | 
|  | return (0);	/* => no or unknown flash */ | 
|  | } | 
|  |  | 
|  | /* set up sector start address table */ | 
|  | for (i = 0; i < info->sector_count; i++) | 
|  | info->start[i] = base + (i * 0x00040000); | 
|  |  | 
|  | /* check for protected sectors */ | 
|  | for (i = 0; i < info->sector_count; i++) { | 
|  | /* read sector protection at sector address, (A7 .. A0) = 0x02 */ | 
|  | /* D0 = 1 if protected */ | 
|  | addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]); | 
|  |  | 
|  | info->protect[i] = addr2[2] & 1; | 
|  | } | 
|  |  | 
|  | /* issue bank reset to return to read mode */ | 
|  | addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0; | 
|  |  | 
|  | return (info->size); | 
|  | } | 
|  |  | 
|  | static int wait_for_DQ7_32(flash_info_t * info, int sect) | 
|  | { | 
|  | ulong start, now, last; | 
|  | volatile CFG_FLASH_WORD_SIZE *addr = | 
|  | (CFG_FLASH_WORD_SIZE *) (info->start[sect]); | 
|  |  | 
|  | start = get_timer(0); | 
|  | last = start; | 
|  | while ((addr[0] & (CFG_FLASH_WORD_SIZE) 0x00800080) != | 
|  | (CFG_FLASH_WORD_SIZE) 0x00800080) { | 
|  | if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) { | 
|  | printf("Timeout\n"); | 
|  | return -1; | 
|  | } | 
|  | /* show that we're waiting */ | 
|  | if ((now - last) > 1000) {	/* every second */ | 
|  | putc('.'); | 
|  | last = now; | 
|  | } | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CFG_FLASH_2ND_16BIT_DEV | 
|  | int flash_erase(flash_info_t * info, int s_first, int s_last) | 
|  | { | 
|  | if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) { | 
|  | return flash_erase_16(info, s_first, s_last); | 
|  | } else { | 
|  | return flash_erase_32(info, s_first, s_last); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int flash_erase_32(flash_info_t * info, int s_first, int s_last) | 
|  | #else | 
|  | int flash_erase(flash_info_t * info, int s_first, int s_last) | 
|  | #endif | 
|  | { | 
|  | volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]); | 
|  | volatile CFG_FLASH_WORD_SIZE *addr2; | 
|  | int flag, prot, sect, l_sect; | 
|  |  | 
|  | if ((s_first < 0) || (s_first > s_last)) { | 
|  | if (info->flash_id == FLASH_UNKNOWN) | 
|  | printf("- missing\n"); | 
|  | else | 
|  | printf("- no sectors to erase\n"); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | if (info->flash_id == FLASH_UNKNOWN) { | 
|  | printf("Can't erase unknown flash type - aborted\n"); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | prot = 0; | 
|  | for (sect = s_first; sect <= s_last; ++sect) { | 
|  | if (info->protect[sect]) | 
|  | prot++; | 
|  | } | 
|  |  | 
|  | if (prot) | 
|  | printf("- Warning: %d protected sectors will not be erased!", prot); | 
|  |  | 
|  | printf("\n"); | 
|  |  | 
|  | l_sect = -1; | 
|  |  | 
|  | /* Disable interrupts which might cause a timeout here */ | 
|  | flag = disable_interrupts(); | 
|  |  | 
|  | /* Start erase on unprotected sectors */ | 
|  | for (sect = s_first; sect <= s_last; sect++) { | 
|  | if (info->protect[sect] == 0) {	/* not protected */ | 
|  | addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]); | 
|  |  | 
|  | addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; | 
|  | addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; | 
|  | addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080; | 
|  | addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; | 
|  | addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; | 
|  | addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00300030;	/* sector erase */ | 
|  |  | 
|  | l_sect = sect; | 
|  | /* | 
|  | * Wait for each sector to complete, it's more | 
|  | * reliable.  According to AMD Spec, you must | 
|  | * issue all erase commands within a specified | 
|  | * timeout.  This has been seen to fail, especially | 
|  | * if printf()s are included (for debug)!! | 
|  | */ | 
|  | wait_for_DQ7_32(info, sect); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* re-enable interrupts if necessary */ | 
|  | if (flag) | 
|  | enable_interrupts(); | 
|  |  | 
|  | /* wait at least 80us - let's wait 1 ms */ | 
|  | udelay(1000); | 
|  |  | 
|  | /* reset to read mode */ | 
|  | addr = (CFG_FLASH_WORD_SIZE *) info->start[0]; | 
|  | addr[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;	/* reset bank */ | 
|  |  | 
|  | printf(" done\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /*----------------------------------------------------------------------- | 
|  | * Copy memory to flash, returns: | 
|  | * 0 - OK | 
|  | * 1 - write timeout | 
|  | * 2 - Flash not erased | 
|  | */ | 
|  | int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) | 
|  | { | 
|  | ulong cp, wp, data; | 
|  | int i, l, rc; | 
|  |  | 
|  | wp = (addr & ~3);	/* get lower word aligned address */ | 
|  |  | 
|  | /* | 
|  | * handle unaligned start bytes | 
|  | */ | 
|  | if ((l = addr - wp) != 0) { | 
|  | data = 0; | 
|  | for (i = 0, cp = wp; i < l; ++i, ++cp) | 
|  | data = (data << 8) | (*(uchar *) cp); | 
|  |  | 
|  | for (; i < 4 && cnt > 0; ++i) { | 
|  | data = (data << 8) | *src++; | 
|  | --cnt; | 
|  | ++cp; | 
|  | } | 
|  |  | 
|  | for (; cnt == 0 && i < 4; ++i, ++cp) | 
|  | data = (data << 8) | (*(uchar *) cp); | 
|  |  | 
|  | if ((rc = write_word(info, wp, data)) != 0) | 
|  | return (rc); | 
|  |  | 
|  | wp += 4; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * handle word aligned part | 
|  | */ | 
|  | while (cnt >= 4) { | 
|  | data = 0; | 
|  | for (i = 0; i < 4; ++i) | 
|  | data = (data << 8) | *src++; | 
|  |  | 
|  | if ((rc = write_word(info, wp, data)) != 0) | 
|  | return (rc); | 
|  |  | 
|  | wp += 4; | 
|  | cnt -= 4; | 
|  | } | 
|  |  | 
|  | if (cnt == 0) | 
|  | return (0); | 
|  |  | 
|  | /* | 
|  | * handle unaligned tail bytes | 
|  | */ | 
|  | data = 0; | 
|  | for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) { | 
|  | data = (data << 8) | *src++; | 
|  | --cnt; | 
|  | } | 
|  | for (; i < 4; ++i, ++cp) | 
|  | data = (data << 8) | (*(uchar *) cp); | 
|  |  | 
|  | return (write_word(info, wp, data)); | 
|  | } | 
|  |  | 
|  | /*----------------------------------------------------------------------- | 
|  | * Copy memory to flash, returns: | 
|  | * 0 - OK | 
|  | * 1 - write timeout | 
|  | * 2 - Flash not erased | 
|  | */ | 
|  | #ifdef CFG_FLASH_2ND_16BIT_DEV | 
|  | static int write_word(flash_info_t * info, ulong dest, ulong data) | 
|  | { | 
|  | if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) { | 
|  | return write_word_16(info, dest, data); | 
|  | } else { | 
|  | return write_word_32(info, dest, data); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int write_word_32(flash_info_t * info, ulong dest, ulong data) | 
|  | #else | 
|  | static int write_word(flash_info_t * info, ulong dest, ulong data) | 
|  | #endif | 
|  | { | 
|  | volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]); | 
|  | volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest; | 
|  | volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) & data; | 
|  | ulong start; | 
|  | int i, flag; | 
|  |  | 
|  | /* Check if Flash is (sufficiently) erased */ | 
|  | if ((*((vu_long *)dest) & data) != data) | 
|  | return (2); | 
|  |  | 
|  | for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) { | 
|  | /* Disable interrupts which might cause a timeout here */ | 
|  | flag = disable_interrupts(); | 
|  |  | 
|  | addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; | 
|  | addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; | 
|  | addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00A000A0; | 
|  |  | 
|  | dest2[i] = data2[i]; | 
|  |  | 
|  | /* re-enable interrupts if necessary */ | 
|  | if (flag) | 
|  | enable_interrupts(); | 
|  |  | 
|  | /* data polling for D7 */ | 
|  | start = get_timer(0); | 
|  | while ((dest2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080) != | 
|  | (data2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080)) { | 
|  |  | 
|  | if (get_timer(start) > CFG_FLASH_WRITE_TOUT) | 
|  | return (1); | 
|  | } | 
|  | } | 
|  |  | 
|  | return (0); | 
|  | } | 
|  |  | 
|  | #ifdef CFG_FLASH_2ND_16BIT_DEV | 
|  |  | 
|  | #undef  CFG_FLASH_WORD_SIZE | 
|  | #define CFG_FLASH_WORD_SIZE unsigned short | 
|  |  | 
|  | /* | 
|  | * The following code cannot be run from FLASH! | 
|  | */ | 
|  | static ulong flash_get_size_16(vu_long * addr, flash_info_t * info) | 
|  | { | 
|  | short i; | 
|  | CFG_FLASH_WORD_SIZE value; | 
|  | ulong base = (ulong) addr; | 
|  | volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr; | 
|  |  | 
|  | DEBUGF("get_size16: FLASH ADDR: %08x\n", (unsigned)addr); | 
|  |  | 
|  | /* issue bank reset to return to read mode */ | 
|  | addr2[0] = (CFG_FLASH_WORD_SIZE) 0xF000F000; | 
|  |  | 
|  | /* Write auto select command: read Manufacturer ID */ | 
|  | addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAA00AA00; | 
|  | addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55005500; | 
|  | addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x90009000; | 
|  | udelay(1000); | 
|  |  | 
|  | value = swap16(addr2[0]); | 
|  | DEBUGF("FLASH MANUFACT: %x\n", value); | 
|  |  | 
|  | switch (value) { | 
|  | case (CFG_FLASH_WORD_SIZE) AMD_MANUFACT: | 
|  | info->flash_id = FLASH_MAN_AMD; | 
|  | break; | 
|  | case (CFG_FLASH_WORD_SIZE) FUJ_MANUFACT: | 
|  | info->flash_id = FLASH_MAN_FUJ; | 
|  | break; | 
|  | default: | 
|  | info->flash_id = FLASH_UNKNOWN; | 
|  | info->sector_count = 0; | 
|  | info->size = 0; | 
|  | return (0);	/* no or unknown flash  */ | 
|  | } | 
|  |  | 
|  | value = swap16(addr2[1]);	/* device ID            */ | 
|  | DEBUGF("\nFLASH DEVICEID: %x\n", value); | 
|  |  | 
|  | switch (value) { | 
|  | case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320B: | 
|  | info->flash_id += FLASH_AM320B; | 
|  | info->sector_count = 71; | 
|  | info->size = 0x00400000; | 
|  | break;	/* => 4 MB	*/ | 
|  | case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320T: | 
|  | info->flash_id += FLASH_AM320T; | 
|  | info->sector_count = 71; | 
|  | info->size = 0x00400000; | 
|  | break;	/* => 4 MB	*/ | 
|  | default: | 
|  | info->flash_id = FLASH_UNKNOWN; | 
|  | return (0);	/* => no or unknown flash */ | 
|  | } | 
|  |  | 
|  | if (info->flash_id & FLASH_BTYPE) { | 
|  | /* set sector offsets for bottom boot block type        */ | 
|  | info->start[0] = base + 0x00000000; | 
|  | info->start[1] = base + 0x00002000; | 
|  | info->start[2] = base + 0x00004000; | 
|  | info->start[3] = base + 0x00006000; | 
|  | info->start[4] = base + 0x00008000; | 
|  | info->start[5] = base + 0x0000a000; | 
|  | info->start[6] = base + 0x0000c000; | 
|  | info->start[7] = base + 0x0000e000; | 
|  |  | 
|  | for (i = 8; i < info->sector_count; i++) | 
|  | info->start[i] = base + (i * 0x00010000) - 0x00070000; | 
|  | } else { | 
|  | /* set sector offsets for top boot block type           */ | 
|  | i = info->sector_count - 1; | 
|  | info->start[i--] = base + info->size - 0x00002000; | 
|  | info->start[i--] = base + info->size - 0x00004000; | 
|  | info->start[i--] = base + info->size - 0x00006000; | 
|  | info->start[i--] = base + info->size - 0x00008000; | 
|  | info->start[i--] = base + info->size - 0x0000a000; | 
|  | info->start[i--] = base + info->size - 0x0000c000; | 
|  | info->start[i--] = base + info->size - 0x0000e000; | 
|  |  | 
|  | for (; i >= 0; i--) | 
|  | info->start[i] = base + i * 0x00010000; | 
|  | } | 
|  |  | 
|  | /* check for protected sectors */ | 
|  | for (i = 0; i < info->sector_count; i++) { | 
|  | /* read sector protection at sector address, (A7 .. A0) = 0x02 */ | 
|  | /* D0 = 1 if protected */ | 
|  | addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]); | 
|  |  | 
|  | info->protect[i] = addr2[2] & 1; | 
|  | } | 
|  |  | 
|  | /* issue bank reset to return to read mode */ | 
|  | addr2[0] = (CFG_FLASH_WORD_SIZE) 0xF000F000; | 
|  |  | 
|  | return (info->size); | 
|  | } | 
|  |  | 
|  | static int wait_for_DQ7_16(flash_info_t * info, int sect) | 
|  | { | 
|  | ulong start, now, last; | 
|  | volatile CFG_FLASH_WORD_SIZE *addr = | 
|  | (CFG_FLASH_WORD_SIZE *) (info->start[sect]); | 
|  |  | 
|  | start = get_timer(0); | 
|  | last = start; | 
|  | while ((addr[0] & (CFG_FLASH_WORD_SIZE) 0x80008000) != | 
|  | (CFG_FLASH_WORD_SIZE) 0x80008000) { | 
|  | if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) { | 
|  | printf("Timeout\n"); | 
|  | return -1; | 
|  | } | 
|  | /* show that we're waiting */ | 
|  | if ((now - last) > 1000) {	/* every second */ | 
|  | putc('.'); | 
|  | last = now; | 
|  | } | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int flash_erase_16(flash_info_t * info, int s_first, int s_last) | 
|  | { | 
|  | volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]); | 
|  | volatile CFG_FLASH_WORD_SIZE *addr2; | 
|  | int flag, prot, sect, l_sect; | 
|  |  | 
|  | if ((s_first < 0) || (s_first > s_last)) { | 
|  | if (info->flash_id == FLASH_UNKNOWN) | 
|  | printf("- missing\n"); | 
|  | else | 
|  | printf("- no sectors to erase\n"); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | if (info->flash_id == FLASH_UNKNOWN) { | 
|  | printf("Can't erase unknown flash type - aborted\n"); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | prot = 0; | 
|  | for (sect = s_first; sect <= s_last; ++sect) { | 
|  | if (info->protect[sect]) | 
|  | prot++; | 
|  | } | 
|  |  | 
|  | if (prot) | 
|  | printf("- Warning: %d protected sectors will not be erased!",	prot); | 
|  |  | 
|  | printf("\n"); | 
|  |  | 
|  | l_sect = -1; | 
|  |  | 
|  | /* Disable interrupts which might cause a timeout here */ | 
|  | flag = disable_interrupts(); | 
|  |  | 
|  | /* Start erase on unprotected sectors */ | 
|  | for (sect = s_first; sect <= s_last; sect++) { | 
|  | if (info->protect[sect] == 0) {	/* not protected */ | 
|  | addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]); | 
|  |  | 
|  | addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAA00AA00; | 
|  | addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55005500; | 
|  | addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x80008000; | 
|  | addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAA00AA00; | 
|  | addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55005500; | 
|  | addr2[0] = (CFG_FLASH_WORD_SIZE) 0x30003000;	/* sector erase */ | 
|  |  | 
|  | l_sect = sect; | 
|  | /* | 
|  | * Wait for each sector to complete, it's more | 
|  | * reliable.  According to AMD Spec, you must | 
|  | * issue all erase commands within a specified | 
|  | * timeout.  This has been seen to fail, especially | 
|  | * if printf()s are included (for debug)!! | 
|  | */ | 
|  | wait_for_DQ7_16(info, sect); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* re-enable interrupts if necessary */ | 
|  | if (flag) | 
|  | enable_interrupts(); | 
|  |  | 
|  | /* wait at least 80us - let's wait 1 ms */ | 
|  | udelay(1000); | 
|  |  | 
|  | /* reset to read mode */ | 
|  | addr = (CFG_FLASH_WORD_SIZE *) info->start[0]; | 
|  | addr[0] = (CFG_FLASH_WORD_SIZE) 0xF000F000;	/* reset bank */ | 
|  |  | 
|  | printf(" done\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int write_word_16(flash_info_t * info, ulong dest, ulong data) | 
|  | { | 
|  | volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]); | 
|  | volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest; | 
|  | volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) & data; | 
|  | ulong start; | 
|  | int i; | 
|  |  | 
|  | /* Check if Flash is (sufficiently) erased */ | 
|  | for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) { | 
|  | if ((dest2[i] & swap16(data2[i])) != swap16(data2[i])) | 
|  | return (2); | 
|  | } | 
|  |  | 
|  | for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) { | 
|  | int flag; | 
|  |  | 
|  | /* Disable interrupts which might cause a timeout here */ | 
|  | flag = disable_interrupts(); | 
|  |  | 
|  | addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAA00AA00; | 
|  | addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55005500; | 
|  | addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xA000A000; | 
|  |  | 
|  | dest2[i] = swap16(data2[i]); | 
|  |  | 
|  | /* re-enable interrupts if necessary */ | 
|  | if (flag) | 
|  | enable_interrupts(); | 
|  |  | 
|  | /* data polling for D7 */ | 
|  | start = get_timer(0); | 
|  | while ((dest2[i] & (CFG_FLASH_WORD_SIZE) 0x80008000) != | 
|  | (swap16(data2[i]) & (CFG_FLASH_WORD_SIZE) 0x80008000)) { | 
|  |  | 
|  | if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { | 
|  | return (1); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | return (0); | 
|  | } | 
|  | #endif /* CFG_FLASH_2ND_16BIT_DEV */ | 
|  |  | 
|  | /*----------------------------------------------------------------------- | 
|  | * Functions | 
|  | */ | 
|  | static ulong flash_get_size(vu_long * addr, flash_info_t * info); | 
|  | static int write_word(flash_info_t * info, ulong dest, ulong data); | 
|  |  | 
|  | /*----------------------------------------------------------------------- | 
|  | */ | 
|  |  | 
|  | unsigned long flash_init(void) | 
|  | { | 
|  | unsigned long total_b = 0; | 
|  | unsigned long size_b[CFG_MAX_FLASH_BANKS]; | 
|  | unsigned short index = 0; | 
|  | int i; | 
|  |  | 
|  | DEBUGF("\n"); | 
|  | DEBUGF("FLASH: Index: %d\n", index); | 
|  |  | 
|  | /* Init: no FLASHes known */ | 
|  | for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) { | 
|  | flash_info[i].flash_id = FLASH_UNKNOWN; | 
|  | flash_info[i].sector_count = -1; | 
|  | flash_info[i].size = 0; | 
|  |  | 
|  | /* check whether the address is 0 */ | 
|  | if (flash_addr_table[index][i] == 0) | 
|  | continue; | 
|  |  | 
|  | /* call flash_get_size() to initialize sector address */ | 
|  | size_b[i] = flash_get_size((vu_long *) flash_addr_table[index][i], | 
|  | &flash_info[i]); | 
|  |  | 
|  | flash_info[i].size = size_b[i]; | 
|  |  | 
|  | if (flash_info[i].flash_id == FLASH_UNKNOWN) { | 
|  | printf("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n", | 
|  | i+1, size_b[i], size_b[i] << 20); | 
|  | flash_info[i].sector_count = -1; | 
|  | flash_info[i].size = 0; | 
|  | } | 
|  |  | 
|  | /* Monitor protection ON by default */ | 
|  | (void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE, | 
|  | CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1, | 
|  | &flash_info[i]); | 
|  | #if defined(CFG_ENV_IS_IN_FLASH) | 
|  | (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR, | 
|  | CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1, | 
|  | &flash_info[i]); | 
|  | #if defined(CFG_ENV_ADDR_REDUND) | 
|  | (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND, | 
|  | CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1, | 
|  | &flash_info[i]); | 
|  | #endif | 
|  | #endif | 
|  | total_b += flash_info[i].size; | 
|  | } | 
|  |  | 
|  | return total_b; | 
|  | } | 
|  | #endif /* if defined(CONFIG_CAM5200) && defined(CONFIG_CAM5200_NIOSFLASH) */ |