|  | This document describes the board support for | 
|  | Dil/NetPC DNP/5370 (http://www.dilnetpc.com/dnp0086.htm) module. | 
|  | The distributor is SSV (http://www.ssv-embedded.de), | 
|  |  | 
|  | The module used to develop the support files contains: | 
|  |  | 
|  | *   Processor: Blackfin BF537 Rev 0.3 (600 MHz core / 120MHz RAM) | 
|  |  | 
|  | *   RAM: 32 MB SDRAM | 
|  | Hynix HY57V561620FTP-H 810EA | 
|  | Connected to Blackfin via "Expansion Bus" | 
|  | Address range 0x0000.0000 - 0x1fff.ffff | 
|  |  | 
|  | *   NOR flash: 32 MBit (4 MByte) | 
|  | Exel Semiconductor ES29LVS320EB | 
|  | Connected to Blackfin via "Expansion Bus", | 
|  | Chip Selects 0, 1 and 2, each is connected | 
|  | to a 1 MB memory bank at Blackfin, therefore | 
|  | only 3 MB accessible. | 
|  | Address range 0x2000.0000 - 0x202f.ffff | 
|  | CFI compatible | 
|  |  | 
|  | Exel Semiconductor was bought by Rohm Semiconductor (www.rohm.com). | 
|  |  | 
|  | *   NAND flash: 64 MBit (8 MByte) | 
|  | Atmel 45DB642D-CNU | 
|  | Connected to Blackfin via SPI | 
|  | CFI compatible | 
|  |  | 
|  | *   Davicom DM9161EP Ethernet PHY | 
|  |  | 
|  | *   A SD card reader, connected via SPI | 
|  |  | 
|  | *   Hardware watchdog MAX823 or TPS3823 | 
|  |  | 
|  | (other devices not listed here) | 
|  |  | 
|  | To run it, the module must be inserted in a 64 pin DIL socket | 
|  | on another board, e.g. DNP/EVA13 (together: SSV SK28). | 
|  |  | 
|  | The Blackfin is booted from NOR flash. The NOR flash data begins | 
|  | with the U-Boot code and is then followed by the Linux code. | 
|  | Finally, the MAC is stored in the last sector. | 
|  | You may need to adjust these settings to your needs. | 
|  | The memory map used to develop the board support is: | 
|  |  | 
|  | Memory map: | 
|  | 0x00000000 .. 0x01ffffff SDRAM | 
|  | 0x20000000 .. 0x202fffff NOR flash | 
|  |  | 
|  | RAM use: | 
|  | 0x01f9bffc .. 0x01fbbffb U-Boot stack | 
|  | 0x01f9c000 .. 0x01f9ffff U-Boot global data | 
|  | 0x01fa0000 .. 0x01fbffff U-Boot malloc() RAM | 
|  | 0x01fc0000 .. 0x01ffffff U-Boot execution RAM | 
|  |  | 
|  | NOR flash use: | 
|  | 0x20000000 .. 0x0002ffff U-Boot | 
|  | 0x20004000 .. 0x20005fff U-Boot environment | 
|  | 0x20030000 .. 0x202effff Linux kernel image | 
|  | 0x202f0000 .. 0x202fffff MAC address sector | 
|  |  | 
|  | NOR flash is 0x00300000 (3145728) bytes large (3 MB). | 
|  | Max space for compressed kernel in flash is 0x002c0000 (2883584) bytes (2.75 MB) | 
|  | Max space for u-boot in flash is 0x00030000 (196608) bytes (192 KB) | 
|  |  | 
|  | The module is hardwired to BYPASS boot mode. |