| /* | 
 |  * (C) Copyright 2001 | 
 |  * Wolfgang Denk, DENX Software Engineering, wd@denx.de. | 
 |  * | 
 |  * See file CREDITS for list of people who contributed to this | 
 |  * project. | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or | 
 |  * modify it under the terms of the GNU General Public License as | 
 |  * published by the Free Software Foundation; either version 2 of | 
 |  * the License, or (at your option) any later version. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program; if not, write to the Free Software | 
 |  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | 
 |  * MA 02111-1307 USA | 
 |  */ | 
 |  | 
 | #include <common.h> | 
 | #include <configs/sacsng.h> | 
 |  | 
 |  | 
 | #undef  DEBUG | 
 |  | 
 | #ifndef	CONFIG_ENV_ADDR | 
 | #define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) | 
 | #endif | 
 | #ifndef CONFIG_ENV_SIZE | 
 | #define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE | 
 | #endif | 
 |  | 
 |  | 
 | flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/ | 
 |  | 
 | /*----------------------------------------------------------------------- | 
 |  * Functions | 
 |  */ | 
 | static ulong flash_get_size (vu_short *addr, flash_info_t *info); | 
 | static int write_word (flash_info_t *info, ulong dest, ulong data); | 
 |  | 
 | /*----------------------------------------------------------------------- | 
 |  */ | 
 |  | 
 | unsigned long flash_init (void) | 
 | { | 
 | 	unsigned long size_b0, size_b1; | 
 | 	int i; | 
 |  | 
 | 	/* Init: no FLASHes known */ | 
 | 	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) { | 
 | 		flash_info[i].flash_id = FLASH_UNKNOWN; | 
 | 	} | 
 |  | 
 | 	size_b0 = flash_get_size((vu_short *)CONFIG_SYS_FLASH0_BASE, &flash_info[0]); | 
 |  | 
 | 	if (flash_info[0].flash_id == FLASH_UNKNOWN) { | 
 | 		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", | 
 | 			size_b0, size_b0<<20); | 
 | 	} | 
 |  | 
 | 	size_b1 = flash_get_size((vu_short *)CONFIG_SYS_FLASH1_BASE, &flash_info[1]); | 
 |  | 
 | #if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE | 
 | 	/* monitor protection ON by default */ | 
 | 	flash_protect(FLAG_PROTECT_SET, | 
 | 		      CONFIG_SYS_MONITOR_BASE, | 
 | 		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, | 
 | 		      &flash_info[0]); | 
 | #endif | 
 |  | 
 | #ifdef	CONFIG_ENV_IS_IN_FLASH | 
 | 	/* ENV protection ON by default */ | 
 | 	flash_protect(FLAG_PROTECT_SET, | 
 | 		      CONFIG_ENV_ADDR, | 
 | 		      CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1, | 
 | 		      &flash_info[0]); | 
 | #endif | 
 |  | 
 | 	if (size_b1) { | 
 | #if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE | 
 | 		/* monitor protection ON by default */ | 
 | 		flash_protect(FLAG_PROTECT_SET, | 
 | 			      CONFIG_SYS_MONITOR_BASE, | 
 | 			      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, | 
 | 			      &flash_info[1]); | 
 | #endif | 
 |  | 
 | #ifdef	CONFIG_ENV_IS_IN_FLASH | 
 | 		/* ENV protection ON by default */ | 
 | 		flash_protect(FLAG_PROTECT_SET, | 
 | 			      CONFIG_ENV_ADDR, | 
 | 			      CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1, | 
 | 			      &flash_info[1]); | 
 | #endif | 
 | 	} else { | 
 | 		flash_info[1].flash_id = FLASH_UNKNOWN; | 
 | 		flash_info[1].sector_count = -1; | 
 | 	} | 
 |  | 
 | 	flash_info[0].size = size_b0; | 
 | 	flash_info[1].size = size_b1; | 
 |  | 
 | 	/* | 
 | 	 * We only report the primary flash for U-Boot's use. | 
 | 	 */ | 
 | 	return (size_b0); | 
 | } | 
 |  | 
 | /*----------------------------------------------------------------------- | 
 |  */ | 
 | void flash_print_info  (flash_info_t *info) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	if (info->flash_id == FLASH_UNKNOWN) { | 
 | 		printf ("missing or unknown FLASH type\n"); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	switch (info->flash_id & FLASH_VENDMASK) { | 
 | 	case FLASH_MAN_AMD:	printf ("AMD ");		break; | 
 | 	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break; | 
 | 	default:		printf ("Unknown Vendor ");	break; | 
 | 	} | 
 |  | 
 | 	switch (info->flash_id & FLASH_TYPEMASK) { | 
 | 	case FLASH_AM400B:	printf ("AM29LV400B (4 Mbit, bottom boot sect)\n"); | 
 | 				break; | 
 | 	case FLASH_AM400T:	printf ("AM29LV400T (4 Mbit, top boot sector)\n"); | 
 | 				break; | 
 | 	case FLASH_AM800B:	printf ("AM29LV800B (8 Mbit, bottom boot sect)\n"); | 
 | 				break; | 
 | 	case FLASH_AM800T:	printf ("AM29LV800T (8 Mbit, top boot sector)\n"); | 
 | 				break; | 
 | 	case FLASH_AM160B:	printf ("AM29LV160B (16 Mbit, bottom boot sect)\n"); | 
 | 				break; | 
 | 	case FLASH_AM160T:	printf ("AM29LV160T (16 Mbit, top boot sector)\n"); | 
 | 				break; | 
 | 	case FLASH_AM320B:	printf ("AM29LV320B (32 Mbit, bottom boot sect)\n"); | 
 | 				break; | 
 | 	case FLASH_AM320T:	printf ("AM29LV320T (32 Mbit, top boot sector)\n"); | 
 | 				break; | 
 | 	default:		printf ("Unknown Chip Type\n"); | 
 | 				break; | 
 | 	} | 
 |  | 
 | 	printf ("  Size: %ld MB in %d Sectors\n", | 
 | 		info->size >> 20, info->sector_count); | 
 |  | 
 | 	printf ("  Sector Start Addresses:"); | 
 | 	for (i=0; i<info->sector_count; ++i) { | 
 | 		if ((i % 5) == 0) | 
 | 			printf ("\n   "); | 
 | 		printf (" %08lX%s", | 
 | 			info->start[i], | 
 | 			info->protect[i] ? " (RO)" : "     " | 
 | 		); | 
 | 	} | 
 | 	printf ("\n"); | 
 | 	return; | 
 | } | 
 |  | 
 | /*----------------------------------------------------------------------- | 
 |  */ | 
 |  | 
 |  | 
 | /*----------------------------------------------------------------------- | 
 |  */ | 
 |  | 
 | /* | 
 |  * The following code cannot be run from FLASH! | 
 |  */ | 
 |  | 
 | static ulong flash_get_size (vu_short *addr, flash_info_t *info) | 
 | { | 
 | 	short i; | 
 | 	ushort value; | 
 | 	ulong  base = (ulong)addr; | 
 |  | 
 | 	/* Write auto select command: read Manufacturer ID */ | 
 | 	addr[0x0555] = 0xAAAA; | 
 | 	addr[0x02AA] = 0x5555; | 
 | 	addr[0x0555] = 0x9090; | 
 | 	__asm__ __volatile__(" sync\n "); | 
 |  | 
 | 	value = addr[0]; | 
 | #ifdef DEBUG | 
 | 	printf("Flash manufacturer 0x%04X\n", value); | 
 | #endif | 
 |  | 
 | 	if(value == (ushort)AMD_MANUFACT) { | 
 | 		info->flash_id = FLASH_MAN_AMD; | 
 | 	} else if (value == (ushort)FUJ_MANUFACT) { | 
 | 		info->flash_id = FLASH_MAN_FUJ; | 
 | 	} else { | 
 | #ifdef DEBUG | 
 | 		printf("Unknown flash manufacturer 0x%04X\n", value); | 
 | #endif | 
 | 		info->flash_id = FLASH_UNKNOWN; | 
 | 		info->sector_count = 0; | 
 | 		info->size = 0; | 
 | 		return (0);			/* no or unknown flash	*/ | 
 | 	} | 
 |  | 
 | 	value = addr[1];			/* device ID		*/ | 
 | #ifdef DEBUG | 
 | 	printf("Flash type 0x%04X\n", value); | 
 | #endif | 
 |  | 
 | 	if(value == (ushort)AMD_ID_LV400T) { | 
 | 		info->flash_id += FLASH_AM400T; | 
 | 		info->sector_count = 11; | 
 | 		info->size = 0x00080000;	/* => 0.5 MB		*/ | 
 | 	} else if(value == (ushort)AMD_ID_LV400B) { | 
 | 		info->flash_id += FLASH_AM400B; | 
 | 		info->sector_count = 11; | 
 | 		info->size = 0x00080000;	/* => 0.5 MB		*/ | 
 | 	} else if(value == (ushort)AMD_ID_LV800T) { | 
 | 		info->flash_id += FLASH_AM800T; | 
 | 		info->sector_count = 19; | 
 | 		info->size = 0x00100000;	/* => 1 MB		*/ | 
 | 	} else if(value == (ushort)AMD_ID_LV800B) { | 
 | 		info->flash_id += FLASH_AM800B; | 
 | 		info->sector_count = 19; | 
 | 		info->size = 0x00100000;	/* => 1 MB		*/ | 
 | 	} else if(value == (ushort)AMD_ID_LV160T) { | 
 | 		info->flash_id += FLASH_AM160T; | 
 | 		info->sector_count = 35; | 
 | 		info->size = 0x00200000;	/* => 2 MB		*/ | 
 | 	} else if(value == (ushort)AMD_ID_LV160B) { | 
 | 		info->flash_id += FLASH_AM160B; | 
 | 		info->sector_count = 35; | 
 | 		info->size = 0x00200000;	/* => 2 MB		*/ | 
 | 	} else if(value == (ushort)AMD_ID_LV320T) { | 
 | 		info->flash_id += FLASH_AM320T; | 
 | 		info->sector_count = 67; | 
 | 		info->size = 0x00400000;	/* => 4 MB		*/ | 
 | 	} else if(value == (ushort)AMD_ID_LV320B) { | 
 | 		info->flash_id += FLASH_AM320B; | 
 | 		info->sector_count = 67; | 
 | 		info->size = 0x00400000;	/* => 4 MB		*/ | 
 | 	} else { | 
 | #ifdef DEBUG | 
 | 		printf("Unknown flash type 0x%04X\n", value); | 
 | 		info->size = CONFIG_SYS_FLASH_SIZE; | 
 | #else | 
 | 		info->flash_id = FLASH_UNKNOWN; | 
 | 		return (0);			/* => no or unknown flash */ | 
 | #endif | 
 | 	} | 
 |  | 
 | 	/* set up sector start address table */ | 
 | 	if (info->flash_id & FLASH_BTYPE) { | 
 | 		/* set sector offsets for bottom boot block type	*/ | 
 | 		info->start[0] = base + 0x00000000; | 
 | 		info->start[1] = base + 0x00004000; | 
 | 		info->start[2] = base + 0x00006000; | 
 | 		info->start[3] = base + 0x00008000; | 
 | 		for (i = 4; i < info->sector_count; i++) { | 
 | 			info->start[i] = base + ((i - 3) * 0x00010000); | 
 | 		} | 
 | 	} else { | 
 | 		/* set sector offsets for top boot block type		*/ | 
 | 		i = info->sector_count - 1; | 
 | 		info->start[i--] = base + info->size - 0x00004000; | 
 | 		info->start[i--] = base + info->size - 0x00006000; | 
 | 		info->start[i--] = base + info->size - 0x00008000; | 
 | 		for (; i >= 0; i--) { | 
 | 			info->start[i] = base + (i * 0x00010000); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* check for protected sectors */ | 
 | 	for (i = 0; i < info->sector_count; i++) { | 
 | 		/* read sector protection at sector address, (A7 .. A0) = 0x02 */ | 
 | 		/* D0 = 1 if protected */ | 
 | 		addr = (volatile unsigned short *)(info->start[i]); | 
 | 		info->protect[i] = addr[2] & 1; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Prevent writes to uninitialized FLASH. | 
 | 	 */ | 
 | 	if (info->flash_id != FLASH_UNKNOWN) { | 
 | 		addr = (volatile unsigned short *)info->start[0]; | 
 |  | 
 | 	} | 
 |  | 
 | 	addr[0] = 0xF0F0;	/* reset bank */ | 
 | 	__asm__ __volatile__(" sync\n "); | 
 | 	return (info->size); | 
 | } | 
 |  | 
 |  | 
 | /*----------------------------------------------------------------------- | 
 |  */ | 
 |  | 
 | int	flash_erase (flash_info_t *info, int s_first, int s_last) | 
 | { | 
 | 	vu_short *addr = (vu_short*)(info->start[0]); | 
 | 	int flag, prot, sect, l_sect; | 
 | 	ulong start, now, last; | 
 |  | 
 | 	if ((s_first < 0) || (s_first > s_last)) { | 
 | 		if (info->flash_id == FLASH_UNKNOWN) { | 
 | 			printf ("- missing\n"); | 
 | 		} else { | 
 | 			printf ("- no sectors to erase\n"); | 
 | 		} | 
 | 		return 1; | 
 | 	} | 
 |  | 
 | 	if ((info->flash_id == FLASH_UNKNOWN) || | 
 | 	    (info->flash_id > FLASH_AMD_COMP)) { | 
 | 		printf ("Can't erase unknown flash type %08lx - aborted\n", | 
 | 			info->flash_id); | 
 | 		return 1; | 
 | 	} | 
 |  | 
 | 	prot = 0; | 
 | 	for (sect=s_first; sect<=s_last; ++sect) { | 
 | 		if (info->protect[sect]) { | 
 | 			prot++; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (prot) { | 
 | 		printf ("- Warning: %d protected sectors will not be erased!\n", | 
 | 			prot); | 
 | 	} else { | 
 | 		printf ("\n"); | 
 | 	} | 
 |  | 
 | 	l_sect = -1; | 
 |  | 
 | 	/* Disable interrupts which might cause a timeout here */ | 
 | 	flag = disable_interrupts(); | 
 |  | 
 | 	addr[0x0555] = 0xAAAA; | 
 | 	addr[0x02AA] = 0x5555; | 
 | 	addr[0x0555] = 0x8080; | 
 | 	addr[0x0555] = 0xAAAA; | 
 | 	addr[0x02AA] = 0x5555; | 
 | 	__asm__ __volatile__(" sync\n "); | 
 |  | 
 | 	/* Start erase on unprotected sectors */ | 
 | 	for (sect = s_first; sect<=s_last; sect++) { | 
 | 		if (info->protect[sect] == 0) {	/* not protected */ | 
 | 			addr = (vu_short*)(info->start[sect]); | 
 | 			addr[0] = 0x3030; | 
 | 			l_sect = sect; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* re-enable interrupts if necessary */ | 
 | 	if (flag) | 
 | 		enable_interrupts(); | 
 |  | 
 | 	/* wait at least 80us - let's wait 1 ms */ | 
 | 	udelay (1000); | 
 |  | 
 | 	/* | 
 | 	 * We wait for the last triggered sector | 
 | 	 */ | 
 | 	if (l_sect < 0) | 
 | 		goto DONE; | 
 |  | 
 | 	start = get_timer (0); | 
 | 	last  = start; | 
 | 	addr = (vu_short*)(info->start[l_sect]); | 
 | 	while ((addr[0] & 0x0080) != 0x0080) { | 
 | 		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { | 
 | 			printf ("Timeout\n"); | 
 | 			addr[0] = 0xF0F0;	/* reset bank */ | 
 | 			__asm__ __volatile__(" sync\n "); | 
 | 			return 1; | 
 | 		} | 
 | 		/* show that we're waiting */ | 
 | 		if ((now - last) > 1000) {	/* every second */ | 
 | 			putc ('.'); | 
 | 			last = now; | 
 | 		} | 
 | 	} | 
 |  | 
 | DONE: | 
 | 	/* reset to read mode */ | 
 | 	addr = (vu_short*)info->start[0]; | 
 | 	addr[0] = 0xF0F0;	/* reset bank */ | 
 | 	__asm__ __volatile__(" sync\n "); | 
 |  | 
 | 	printf (" done\n"); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /*----------------------------------------------------------------------- | 
 |  * Copy memory to flash, returns: | 
 |  * 0 - OK | 
 |  * 1 - write timeout | 
 |  * 2 - Flash not erased | 
 |  */ | 
 |  | 
 | int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) | 
 | { | 
 | 	ulong cp, wp, data; | 
 | 	int i, l, rc; | 
 |  | 
 | 	wp = (addr & ~3);	/* get lower word aligned address */ | 
 |  | 
 | 	/* | 
 | 	 * handle unaligned start bytes | 
 | 	 */ | 
 | 	if ((l = addr - wp) != 0) { | 
 | 		data = 0; | 
 | 		for (i=0, cp=wp; i<l; ++i, ++cp) { | 
 | 			data = (data << 8) | (*(uchar *)cp); | 
 | 		} | 
 | 		for (; i<4 && cnt>0; ++i) { | 
 | 			data = (data << 8) | *src++; | 
 | 			--cnt; | 
 | 			++cp; | 
 | 		} | 
 | 		for (; cnt==0 && i<4; ++i, ++cp) { | 
 | 			data = (data << 8) | (*(uchar *)cp); | 
 | 		} | 
 |  | 
 | 		if ((rc = write_word(info, wp, data)) != 0) { | 
 | 			return (rc); | 
 | 		} | 
 | 		wp += 4; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * handle word aligned part | 
 | 	 */ | 
 | 	while (cnt >= 4) { | 
 | 		data = 0; | 
 | 		for (i=0; i<4; ++i) { | 
 | 			data = (data << 8) | *src++; | 
 | 		} | 
 | 		if ((rc = write_word(info, wp, data)) != 0) { | 
 | 			return (rc); | 
 | 		} | 
 | 		wp  += 4; | 
 | 		cnt -= 4; | 
 | 	} | 
 |  | 
 | 	if (cnt == 0) { | 
 | 		return (0); | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * handle unaligned tail bytes | 
 | 	 */ | 
 | 	data = 0; | 
 | 	for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { | 
 | 		data = (data << 8) | *src++; | 
 | 		--cnt; | 
 | 	} | 
 | 	for (; i<4; ++i, ++cp) { | 
 | 		data = (data << 8) | (*(uchar *)cp); | 
 | 	} | 
 |  | 
 | 	return (write_word(info, wp, data)); | 
 | } | 
 |  | 
 | /*----------------------------------------------------------------------- | 
 |  * Write a word to Flash, returns: | 
 |  * 0 - OK | 
 |  * 1 - write timeout | 
 |  * 2 - Flash not erased | 
 |  */ | 
 | static int write_word (flash_info_t *info, ulong dest, ulong data) | 
 | { | 
 | 	vu_short *addr = (vu_short*)(info->start[0]); | 
 | 	ulong start; | 
 | 	int flag; | 
 | 	int j; | 
 |  | 
 | 	/* Check if Flash is (sufficiently) erased */ | 
 | 	if (((*(vu_long *)dest) & data) != data) { | 
 | 		return (2); | 
 | 	} | 
 | 	/* Disable interrupts which might cause a timeout here */ | 
 | 	flag = disable_interrupts(); | 
 |  | 
 | 	/* The original routine was designed to write 32 bit words to | 
 | 	 * 32 bit wide memory.	We have 16 bit wide memory so we do | 
 | 	 * two writes.	We write the LSB first at dest+2 and then the | 
 | 	 * MSB at dest (lousy big endian). | 
 | 	 */ | 
 | 	dest += 2; | 
 | 	for(j = 0; j < 2; j++) { | 
 | 		addr[0x0555] = 0xAAAA; | 
 | 		addr[0x02AA] = 0x5555; | 
 | 		addr[0x0555] = 0xA0A0; | 
 | 		__asm__ __volatile__(" sync\n "); | 
 |  | 
 | 		*((vu_short *)dest) = (ushort)data; | 
 |  | 
 | 		/* re-enable interrupts if necessary */ | 
 | 		if (flag) | 
 | 			enable_interrupts(); | 
 |  | 
 | 		/* data polling for D7 */ | 
 | 		start = get_timer (0); | 
 | 		while (*(vu_short *)dest != (ushort)data) { | 
 | 			if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { | 
 | 				return (1); | 
 | 			} | 
 | 		} | 
 | 		dest -= 2; | 
 | 		data >>= 16; | 
 | 	} | 
 | 	return (0); | 
 | } | 
 |  | 
 | /*----------------------------------------------------------------------- | 
 |  */ |