board/Marvell/common/intel_flash.h - u-boot - Git at Google

 /*
  * (C) Copyright 2000
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  *
  * Hacked for the marvell db64360 eval board by
  * Ingo Assmus <ingo.assmus@keymile.com>
  */

 /*************** DEFINES for Intel StrataFlash FLASH chip ********************/

 /*
  * acceptable chips types are:
  *
  *	28F320J5, 28F640J5, 28F320J3A, 28F640J3A and 28F128J3A
  */

 /* register addresses, valid only following an CHIP_CMD_RD_ID command */
 #define CHIP_ADDR_REG_MAN	0x000000	/* manufacturer's id */
 #define CHIP_ADDR_REG_DEV	0x000001	/* device id */
 #define CHIP_ADDR_REG_CFGM	0x000003	/* master lock config */
 #define CHIP_ADDR_REG_CFG(b)	(((b)<<16)|2)	/* lock config for block b */

 /* Commands */
 #define CHIP_CMD_RST		0xFF		/* reset flash */
 #define CHIP_CMD_RD_ID		0x90		/* read the id and lock bits */
 #define CHIP_CMD_RD_QUERY	0x98		/* read device capabilities */
 #define CHIP_CMD_RD_STAT	0x70		/* read the status register */
 #define CHIP_CMD_CLR_STAT	0x50		/* clear the staus register */
 #define CHIP_CMD_WR_BUF		0xE8		/* clear the staus register */
 #define CHIP_CMD_PROG		0x40		/* program word command */
 #define CHIP_CMD_ERASE1		0x20		/* 1st word for block erase */
 #define CHIP_CMD_ERASE2		0xD0		/* 2nd word for block erase */
 #define CHIP_CMD_ERASE_SUSP	0xB0		/* suspend block erase */
 #define CHIP_CMD_LOCK		0x60		/* 1st word for all lock cmds */
 #define CHIP_CMD_SET_LOCK_BLK	0x01		/* 2nd wrd set block lock bit */
 #define CHIP_CMD_SET_LOCK_MSTR	0xF1		/* 2nd wrd set master lck bit */
 #define CHIP_CMD_CLR_LOCK_BLK	0xD0		/* 2nd wrd clear blk lck bit */

 /* status register bits */
 #define CHIP_STAT_DPS		0x02		/* Device Protect Status */
 #define CHIP_STAT_VPPS		0x08		/* VPP Status */
 #define CHIP_STAT_PSLBS		0x10		/* Program+Set Lock Bit Stat */
 #define CHIP_STAT_ECLBS		0x20		/* Erase+Clr Lock Bit Stat */
 #define CHIP_STAT_ESS		0x40		/* Erase Suspend Status */
 #define CHIP_STAT_RDY		0x80		/* WSM Mach Status, 1=rdy */

 #define CHIP_STAT_ERR		(CHIP_STAT_VPPS | CHIP_STAT_DPS | \
 				    CHIP_STAT_ECLBS | CHIP_STAT_PSLBS)

 /* ID and Lock Configuration */
 #define CHIP_RD_ID_LOCK		0x01		/* Bit 0 of each byte */
 #define CHIP_RD_ID_MAN		0x89		/* Manufacturer code = 0x89 */
 #define CHIP_RD_ID_DEV		CONFIG_SYS_FLASH_ID

 /* dimensions */
 #define CHIP_WIDTH		2		/* chips are in 16 bit mode */
 #define CHIP_WSHIFT		1		/* (log2 of CHIP_WIDTH) */
 #define CHIP_NBLOCKS		128
 #define CHIP_BLKSZ		(128 * 1024)	/* of 128Kbytes each */
 #define CHIP_SIZE		(CHIP_BLKSZ * CHIP_NBLOCKS)

 /********************** DEFINES for Hymod Flash ******************************/

 /*
  * The hymod board has 2 x 28F320J5 chips running in
  * 16 bit mode, for a 32 bit wide bank.
  */

 typedef unsigned short bank_word_t;		/* 8/16/32/64bit unsigned int */
 typedef volatile bank_word_t *bank_addr_t;
 typedef unsigned long bank_size_t;		/* want this big - >= 32 bit */

 #define BANK_CHIP_WIDTH		1		/* each bank is 1 chip wide */
 #define BANK_CHIP_WSHIFT	0		/* (log2 of BANK_CHIP_WIDTH) */

 #define BANK_WIDTH		(CHIP_WIDTH * BANK_CHIP_WIDTH)
 #define BANK_WSHIFT		(CHIP_WSHIFT + BANK_CHIP_WSHIFT)
 #define BANK_NBLOCKS		CHIP_NBLOCKS
 #define BANK_BLKSZ		(CHIP_BLKSZ * BANK_CHIP_WIDTH)
 #define BANK_SIZE		(CHIP_SIZE * BANK_CHIP_WIDTH)

 #define MAX_BANKS		1		/* only one bank possible */

 /* align bank addresses and sizes to bank word boundaries */
 #define BANK_ADDR_WORD_ALIGN(a)	((bank_addr_t)((bank_size_t)(a) \
 				    & ~(BANK_WIDTH - 1)))
 #define BANK_SIZE_WORD_ALIGN(s)	((bank_size_t)BANK_ADDR_WORD_ALIGN( \
 				    (bank_size_t)(s) + (BANK_WIDTH - 1)))

 /* align bank addresses and sizes to bank block boundaries */
 #define BANK_ADDR_BLK_ALIGN(a)	((bank_addr_t)((bank_size_t)(a) \
 				    & ~(BANK_BLKSZ - 1)))
 #define BANK_SIZE_BLK_ALIGN(s)	((bank_size_t)BANK_ADDR_BLK_ALIGN( \
 				    (bank_size_t)(s) + (BANK_BLKSZ - 1)))

 /* align bank addresses and sizes to bank boundaries */
 #define BANK_ADDR_BANK_ALIGN(a)	((bank_addr_t)((bank_size_t)(a) \
 				    & ~(BANK_SIZE - 1)))
 #define BANK_SIZE_BANK_ALIGN(s)	((bank_size_t)BANK_ADDR_BANK_ALIGN( \
 				    (bank_size_t)(s) + (BANK_SIZE - 1)))

 /* add an offset to a bank address */
 #define BANK_ADDR_OFFSET(a, o)	(bank_addr_t)((bank_size_t)(a) + \
 				    (bank_size_t)(o))

 /* get base address of bank b, given flash base address a */
 #define BANK_ADDR_BASE(a, b)	BANK_ADDR_OFFSET(BANK_ADDR_BANK_ALIGN(a), \
 				    (bank_size_t)(b) * BANK_SIZE)

 /* adjust a bank address to start of next word, block or bank */
 #define BANK_ADDR_NEXT_WORD(a)	BANK_ADDR_OFFSET(BANK_ADDR_WORD_ALIGN(a), \
 				    BANK_WIDTH)
 #define BANK_ADDR_NEXT_BLK(a)	BANK_ADDR_OFFSET(BANK_ADDR_BLK_ALIGN(a), \
 				    BANK_BLKSZ)
 #define BANK_ADDR_NEXT_BANK(a)	BANK_ADDR_OFFSET(BANK_ADDR_BANK_ALIGN(a), \
 				    BANK_SIZE)

 /* get bank address of chip register r given a bank base address a */
 #define BANK_ADDR_REG(a, r)	BANK_ADDR_OFFSET(BANK_ADDR_BANK_ALIGN(a), \
 				    ((bank_size_t)(r) << BANK_WSHIFT))

 /* make a bank address for each chip register address */

 #define BANK_ADDR_REG_MAN(a)	BANK_ADDR_REG((a), CHIP_ADDR_REG_MAN)
 #define BANK_ADDR_REG_DEV(a)	BANK_ADDR_REG((a), CHIP_ADDR_REG_DEV)
 #define BANK_ADDR_REG_CFGM(a)	BANK_ADDR_REG((a), CHIP_ADDR_REG_CFGM)
 #define BANK_ADDR_REG_CFG(b,a)	BANK_ADDR_REG((a), CHIP_ADDR_REG_CFG(b))

 /*
  * replicate a chip cmd/stat/rd value into each byte position within a word
  * so that multiple chips are accessed in a single word i/o operation
  *
  * this must be as wide as the bank_word_t type, and take into account the
  * chip width and bank layout
  */

 #define BANK_FILL_WORD(o)	((bank_word_t)(o))

 /* make a bank word value for each chip cmd/stat/rd value */

 /* Commands */
 #define BANK_CMD_RST		BANK_FILL_WORD(CHIP_CMD_RST)
 #define BANK_CMD_RD_ID		BANK_FILL_WORD(CHIP_CMD_RD_ID)
 #define BANK_CMD_RD_STAT	BANK_FILL_WORD(CHIP_CMD_RD_STAT)
 #define BANK_CMD_CLR_STAT	BANK_FILL_WORD(CHIP_CMD_CLR_STAT)
 #define BANK_CMD_ERASE1		BANK_FILL_WORD(CHIP_CMD_ERASE1)
 #define BANK_CMD_ERASE2		BANK_FILL_WORD(CHIP_CMD_ERASE2)
 #define BANK_CMD_PROG		BANK_FILL_WORD(CHIP_CMD_PROG)
 #define BANK_CMD_LOCK		BANK_FILL_WORD(CHIP_CMD_LOCK)
 #define BANK_CMD_SET_LOCK_BLK	BANK_FILL_WORD(CHIP_CMD_SET_LOCK_BLK)
 #define BANK_CMD_SET_LOCK_MSTR	BANK_FILL_WORD(CHIP_CMD_SET_LOCK_MSTR)
 #define BANK_CMD_CLR_LOCK_BLK	BANK_FILL_WORD(CHIP_CMD_CLR_LOCK_BLK)

 /* status register bits */
 #define BANK_STAT_DPS		BANK_FILL_WORD(CHIP_STAT_DPS)
 #define BANK_STAT_PSS		BANK_FILL_WORD(CHIP_STAT_PSS)
 #define BANK_STAT_VPPS		BANK_FILL_WORD(CHIP_STAT_VPPS)
 #define BANK_STAT_PSLBS		BANK_FILL_WORD(CHIP_STAT_PSLBS)
 #define BANK_STAT_ECLBS		BANK_FILL_WORD(CHIP_STAT_ECLBS)
 #define BANK_STAT_ESS		BANK_FILL_WORD(CHIP_STAT_ESS)
 #define BANK_STAT_RDY		BANK_FILL_WORD(CHIP_STAT_RDY)

 #define BANK_STAT_ERR		BANK_FILL_WORD(CHIP_STAT_ERR)

 /* ID and Lock Configuration */
 #define BANK_RD_ID_LOCK		BANK_FILL_WORD(CHIP_RD_ID_LOCK)
 #define BANK_RD_ID_MAN		BANK_FILL_WORD(CHIP_RD_ID_MAN)
 #define BANK_RD_ID_DEV		BANK_FILL_WORD(CHIP_RD_ID_DEV)
	/*
	* (C) Copyright 2000
	* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*
	* Hacked for the marvell db64360 eval board by
	* Ingo Assmus <ingo.assmus@keymile.com>
	*/

	/************* DEFINES for Intel StrataFlash FLASH chip ******************/

	/*
	* acceptable chips types are:
	*
	* 28F320J5, 28F640J5, 28F320J3A, 28F640J3A and 28F128J3A
	*/

	/* register addresses, valid only following an CHIP_CMD_RD_ID command */
	#define CHIP_ADDR_REG_MAN 0x000000 /* manufacturer's id */
	#define CHIP_ADDR_REG_DEV 0x000001 /* device id */
	#define CHIP_ADDR_REG_CFGM 0x000003 /* master lock config */
	#define CHIP_ADDR_REG_CFG(b) (((b)<<16)\|2) /* lock config for block b */

	/* Commands */
	#define CHIP_CMD_RST 0xFF /* reset flash */
	#define CHIP_CMD_RD_ID 0x90 /* read the id and lock bits */
	#define CHIP_CMD_RD_QUERY 0x98 /* read device capabilities */
	#define CHIP_CMD_RD_STAT 0x70 /* read the status register */
	#define CHIP_CMD_CLR_STAT 0x50 /* clear the staus register */
	#define CHIP_CMD_WR_BUF 0xE8 /* clear the staus register */
	#define CHIP_CMD_PROG 0x40 /* program word command */
	#define CHIP_CMD_ERASE1 0x20 /* 1st word for block erase */
	#define CHIP_CMD_ERASE2 0xD0 /* 2nd word for block erase */
	#define CHIP_CMD_ERASE_SUSP 0xB0 /* suspend block erase */
	#define CHIP_CMD_LOCK 0x60 /* 1st word for all lock cmds */
	#define CHIP_CMD_SET_LOCK_BLK 0x01 /* 2nd wrd set block lock bit */
	#define CHIP_CMD_SET_LOCK_MSTR 0xF1 /* 2nd wrd set master lck bit */
	#define CHIP_CMD_CLR_LOCK_BLK 0xD0 /* 2nd wrd clear blk lck bit */

	/* status register bits */
	#define CHIP_STAT_DPS 0x02 /* Device Protect Status */
	#define CHIP_STAT_VPPS 0x08 /* VPP Status */
	#define CHIP_STAT_PSLBS 0x10 /* Program+Set Lock Bit Stat */
	#define CHIP_STAT_ECLBS 0x20 /* Erase+Clr Lock Bit Stat */
	#define CHIP_STAT_ESS 0x40 /* Erase Suspend Status */
	#define CHIP_STAT_RDY 0x80 /* WSM Mach Status, 1=rdy */

	#define CHIP_STAT_ERR (CHIP_STAT_VPPS \| CHIP_STAT_DPS \| \
	CHIP_STAT_ECLBS \| CHIP_STAT_PSLBS)

	/* ID and Lock Configuration */
	#define CHIP_RD_ID_LOCK 0x01 /* Bit 0 of each byte */
	#define CHIP_RD_ID_MAN 0x89 /* Manufacturer code = 0x89 */
	#define CHIP_RD_ID_DEV CONFIG_SYS_FLASH_ID

	/* dimensions */
	#define CHIP_WIDTH 2 /* chips are in 16 bit mode */
	#define CHIP_WSHIFT 1 /* (log2 of CHIP_WIDTH) */
	#define CHIP_NBLOCKS 128
	#define CHIP_BLKSZ (128 * 1024) /* of 128Kbytes each */
	#define CHIP_SIZE (CHIP_BLKSZ * CHIP_NBLOCKS)

	/******************** DEFINES for Hymod Flash ****************************/

	/*
	* The hymod board has 2 x 28F320J5 chips running in
	* 16 bit mode, for a 32 bit wide bank.
	*/

	typedef unsigned short bank_word_t; /* 8/16/32/64bit unsigned int */
	typedef volatile bank_word_t *bank_addr_t;
	typedef unsigned long bank_size_t; /* want this big - >= 32 bit */

	#define BANK_CHIP_WIDTH 1 /* each bank is 1 chip wide */
	#define BANK_CHIP_WSHIFT 0 /* (log2 of BANK_CHIP_WIDTH) */

	#define BANK_WIDTH (CHIP_WIDTH * BANK_CHIP_WIDTH)
	#define BANK_WSHIFT (CHIP_WSHIFT + BANK_CHIP_WSHIFT)
	#define BANK_NBLOCKS CHIP_NBLOCKS
	#define BANK_BLKSZ (CHIP_BLKSZ * BANK_CHIP_WIDTH)
	#define BANK_SIZE (CHIP_SIZE * BANK_CHIP_WIDTH)

	#define MAX_BANKS 1 /* only one bank possible */

	/* align bank addresses and sizes to bank word boundaries */
	#define BANK_ADDR_WORD_ALIGN(a) ((bank_addr_t)((bank_size_t)(a) \
	& ~(BANK_WIDTH - 1)))
	#define BANK_SIZE_WORD_ALIGN(s) ((bank_size_t)BANK_ADDR_WORD_ALIGN( \
	(bank_size_t)(s) + (BANK_WIDTH - 1)))

	/* align bank addresses and sizes to bank block boundaries */
	#define BANK_ADDR_BLK_ALIGN(a) ((bank_addr_t)((bank_size_t)(a) \
	& ~(BANK_BLKSZ - 1)))
	#define BANK_SIZE_BLK_ALIGN(s) ((bank_size_t)BANK_ADDR_BLK_ALIGN( \
	(bank_size_t)(s) + (BANK_BLKSZ - 1)))

	/* align bank addresses and sizes to bank boundaries */
	#define BANK_ADDR_BANK_ALIGN(a) ((bank_addr_t)((bank_size_t)(a) \
	& ~(BANK_SIZE - 1)))
	#define BANK_SIZE_BANK_ALIGN(s) ((bank_size_t)BANK_ADDR_BANK_ALIGN( \
	(bank_size_t)(s) + (BANK_SIZE - 1)))

	/* add an offset to a bank address */
	#define BANK_ADDR_OFFSET(a, o) (bank_addr_t)((bank_size_t)(a) + \
	(bank_size_t)(o))

	/* get base address of bank b, given flash base address a */
	#define BANK_ADDR_BASE(a, b) BANK_ADDR_OFFSET(BANK_ADDR_BANK_ALIGN(a), \
	(bank_size_t)(b) * BANK_SIZE)

	/* adjust a bank address to start of next word, block or bank */
	#define BANK_ADDR_NEXT_WORD(a) BANK_ADDR_OFFSET(BANK_ADDR_WORD_ALIGN(a), \
	BANK_WIDTH)
	#define BANK_ADDR_NEXT_BLK(a) BANK_ADDR_OFFSET(BANK_ADDR_BLK_ALIGN(a), \
	BANK_BLKSZ)
	#define BANK_ADDR_NEXT_BANK(a) BANK_ADDR_OFFSET(BANK_ADDR_BANK_ALIGN(a), \
	BANK_SIZE)

	/* get bank address of chip register r given a bank base address a */
	#define BANK_ADDR_REG(a, r) BANK_ADDR_OFFSET(BANK_ADDR_BANK_ALIGN(a), \
	((bank_size_t)(r) << BANK_WSHIFT))

	/* make a bank address for each chip register address */

	#define BANK_ADDR_REG_MAN(a) BANK_ADDR_REG((a), CHIP_ADDR_REG_MAN)
	#define BANK_ADDR_REG_DEV(a) BANK_ADDR_REG((a), CHIP_ADDR_REG_DEV)
	#define BANK_ADDR_REG_CFGM(a) BANK_ADDR_REG((a), CHIP_ADDR_REG_CFGM)
	#define BANK_ADDR_REG_CFG(b,a) BANK_ADDR_REG((a), CHIP_ADDR_REG_CFG(b))

	/*
	* replicate a chip cmd/stat/rd value into each byte position within a word
	* so that multiple chips are accessed in a single word i/o operation
	*
	* this must be as wide as the bank_word_t type, and take into account the
	* chip width and bank layout
	*/

	#define BANK_FILL_WORD(o) ((bank_word_t)(o))

	/* make a bank word value for each chip cmd/stat/rd value */

	/* Commands */
	#define BANK_CMD_RST BANK_FILL_WORD(CHIP_CMD_RST)
	#define BANK_CMD_RD_ID BANK_FILL_WORD(CHIP_CMD_RD_ID)
	#define BANK_CMD_RD_STAT BANK_FILL_WORD(CHIP_CMD_RD_STAT)
	#define BANK_CMD_CLR_STAT BANK_FILL_WORD(CHIP_CMD_CLR_STAT)
	#define BANK_CMD_ERASE1 BANK_FILL_WORD(CHIP_CMD_ERASE1)
	#define BANK_CMD_ERASE2 BANK_FILL_WORD(CHIP_CMD_ERASE2)
	#define BANK_CMD_PROG BANK_FILL_WORD(CHIP_CMD_PROG)
	#define BANK_CMD_LOCK BANK_FILL_WORD(CHIP_CMD_LOCK)
	#define BANK_CMD_SET_LOCK_BLK BANK_FILL_WORD(CHIP_CMD_SET_LOCK_BLK)
	#define BANK_CMD_SET_LOCK_MSTR BANK_FILL_WORD(CHIP_CMD_SET_LOCK_MSTR)
	#define BANK_CMD_CLR_LOCK_BLK BANK_FILL_WORD(CHIP_CMD_CLR_LOCK_BLK)

	/* status register bits */
	#define BANK_STAT_DPS BANK_FILL_WORD(CHIP_STAT_DPS)
	#define BANK_STAT_PSS BANK_FILL_WORD(CHIP_STAT_PSS)
	#define BANK_STAT_VPPS BANK_FILL_WORD(CHIP_STAT_VPPS)
	#define BANK_STAT_PSLBS BANK_FILL_WORD(CHIP_STAT_PSLBS)
	#define BANK_STAT_ECLBS BANK_FILL_WORD(CHIP_STAT_ECLBS)
	#define BANK_STAT_ESS BANK_FILL_WORD(CHIP_STAT_ESS)
	#define BANK_STAT_RDY BANK_FILL_WORD(CHIP_STAT_RDY)

	#define BANK_STAT_ERR BANK_FILL_WORD(CHIP_STAT_ERR)

	/* ID and Lock Configuration */
	#define BANK_RD_ID_LOCK BANK_FILL_WORD(CHIP_RD_ID_LOCK)
	#define BANK_RD_ID_MAN BANK_FILL_WORD(CHIP_RD_ID_MAN)
	#define BANK_RD_ID_DEV BANK_FILL_WORD(CHIP_RD_ID_DEV)