| /* | 
 |  * (C) Copyright 2002 | 
 |  * Brad Kemp, Seranoa Networks, Brad.Kemp@seranoa.com | 
 |  * | 
 |  * See file CREDITS for list of people who contributed to this | 
 |  * project. | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or | 
 |  * modify it under the terms of the GNU General Public License as | 
 |  * published by the Free Software Foundation; either version 2 of | 
 |  * the License, or (at your option) any later version. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the | 
 |  * GNU General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program; if not, write to the Free Software | 
 |  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | 
 |  * MA 02111-1307 USA | 
 |  */ | 
 |  | 
 | #include <common.h> | 
 | #include <asm/processor.h> | 
 |  | 
 | #undef  DEBUG_FLASH | 
 | /* | 
 |  * This file implements a Common Flash Interface (CFI) driver for ppcboot. | 
 |  * The width of the port and the width of the chips are determined at initialization. | 
 |  * These widths are used to calculate the address for access CFI data structures. | 
 |  * It has been tested on an Intel Strataflash implementation. | 
 |  * | 
 |  * References | 
 |  * JEDEC Standard JESD68 - Common Flash Interface (CFI) | 
 |  * JEDEC Standard JEP137-A Common Flash Interface (CFI) ID Codes | 
 |  * Intel Application Note 646 Common Flash Interface (CFI) and Command Sets | 
 |  * Intel 290667-008 3 Volt Intel StrataFlash Memory datasheet | 
 |  * | 
 |  * TODO | 
 |  * Use Primary Extended Query table (PRI) and Alternate Algorithm Query Table (ALT) to determine if protection is available | 
 |  * Add support for other command sets Use the PRI and ALT to determine command set | 
 |  * Verify erase and program timeouts. | 
 |  */ | 
 |  | 
 | #define FLASH_CMD_CFI			0x98 | 
 | #define FLASH_CMD_READ_ID		0x90 | 
 | #define FLASH_CMD_RESET			0xff | 
 | #define FLASH_CMD_BLOCK_ERASE		0x20 | 
 | #define FLASH_CMD_ERASE_CONFIRM		0xD0 | 
 | #define FLASH_CMD_WRITE			0x40 | 
 | #define FLASH_CMD_PROTECT		0x60 | 
 | #define FLASH_CMD_PROTECT_SET		0x01 | 
 | #define FLASH_CMD_PROTECT_CLEAR		0xD0 | 
 | #define FLASH_CMD_CLEAR_STATUS		0x50 | 
 | #define FLASH_CMD_WRITE_TO_BUFFER       0xE8 | 
 | #define FLASH_CMD_WRITE_BUFFER_CONFIRM  0xD0 | 
 |  | 
 | #define FLASH_STATUS_DONE		0x80 | 
 | #define FLASH_STATUS_ESS		0x40 | 
 | #define FLASH_STATUS_ECLBS		0x20 | 
 | #define FLASH_STATUS_PSLBS		0x10 | 
 | #define FLASH_STATUS_VPENS		0x08 | 
 | #define FLASH_STATUS_PSS		0x04 | 
 | #define FLASH_STATUS_DPS		0x02 | 
 | #define FLASH_STATUS_R			0x01 | 
 | #define FLASH_STATUS_PROTECT		0x01 | 
 |  | 
 | #define FLASH_OFFSET_CFI		0x55 | 
 | #define FLASH_OFFSET_CFI_RESP		0x10 | 
 | #define FLASH_OFFSET_WTOUT		0x1F | 
 | #define FLASH_OFFSET_WBTOUT             0x20 | 
 | #define FLASH_OFFSET_ETOUT		0x21 | 
 | #define FLASH_OFFSET_CETOUT             0x22 | 
 | #define FLASH_OFFSET_WMAX_TOUT		0x23 | 
 | #define FLASH_OFFSET_WBMAX_TOUT         0x24 | 
 | #define FLASH_OFFSET_EMAX_TOUT		0x25 | 
 | #define FLASH_OFFSET_CEMAX_TOUT         0x26 | 
 | #define FLASH_OFFSET_SIZE		0x27 | 
 | #define FLASH_OFFSET_INTERFACE          0x28 | 
 | #define FLASH_OFFSET_BUFFER_SIZE        0x2A | 
 | #define FLASH_OFFSET_NUM_ERASE_REGIONS	0x2C | 
 | #define FLASH_OFFSET_ERASE_REGIONS	0x2D | 
 | #define FLASH_OFFSET_PROTECT		0x02 | 
 | #define FLASH_OFFSET_USER_PROTECTION    0x85 | 
 | #define FLASH_OFFSET_INTEL_PROTECTION   0x81 | 
 |  | 
 |  | 
 | #define FLASH_MAN_CFI			0x01000000 | 
 |  | 
 |  | 
 | typedef union { | 
 | 	unsigned char c; | 
 | 	unsigned short w; | 
 | 	unsigned long l; | 
 | } cfiword_t; | 
 |  | 
 | typedef union { | 
 | 	unsigned char * cp; | 
 | 	unsigned short *wp; | 
 | 	unsigned long *lp; | 
 | } cfiptr_t; | 
 |  | 
 | #define NUM_ERASE_REGIONS 4 | 
 |  | 
 | flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/ | 
 |  | 
 |  | 
 | /*----------------------------------------------------------------------- | 
 |  * Functions | 
 |  */ | 
 |  | 
 |  | 
 | static void flash_add_byte(flash_info_t *info, cfiword_t * cword, uchar c); | 
 | static void flash_make_cmd(flash_info_t * info, uchar cmd, void * cmdbuf); | 
 | static void flash_write_cmd(flash_info_t * info, int sect, uchar offset, uchar cmd); | 
 | static int flash_isequal(flash_info_t * info, int sect, uchar offset, uchar cmd); | 
 | static int flash_isset(flash_info_t * info, int sect, uchar offset, uchar cmd); | 
 | static int flash_detect_cfi(flash_info_t * info); | 
 | static ulong flash_get_size (ulong base, int banknum); | 
 | static int flash_write_cfiword (flash_info_t *info, ulong dest, cfiword_t cword); | 
 | static int flash_full_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt); | 
 | #ifdef CFG_FLASH_USE_BUFFER_WRITE | 
 | static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp, int len); | 
 | #endif | 
 | /*----------------------------------------------------------------------- | 
 |  * create an address based on the offset and the port width | 
 |  */ | 
 | inline uchar * flash_make_addr(flash_info_t * info, int sect, int offset) | 
 | { | 
 | 	return ((uchar *)(info->start[sect] + (offset * info->portwidth))); | 
 | } | 
 | /*----------------------------------------------------------------------- | 
 |  * read a character at a port width address | 
 |  */ | 
 | inline uchar flash_read_uchar(flash_info_t * info, uchar offset) | 
 | { | 
 | 	uchar *cp; | 
 | 	cp = flash_make_addr(info, 0, offset); | 
 | 	return (cp[info->portwidth - 1]); | 
 | } | 
 |  | 
 | /*----------------------------------------------------------------------- | 
 |  * read a short word by swapping for ppc format. | 
 |  */ | 
 | ushort flash_read_ushort(flash_info_t * info, int sect,  uchar offset) | 
 | { | 
 |     uchar * addr; | 
 |  | 
 |     addr = flash_make_addr(info, sect, offset); | 
 |     return ((addr[(2*info->portwidth) - 1] << 8) | addr[info->portwidth - 1]); | 
 |  | 
 | } | 
 |  | 
 | /*----------------------------------------------------------------------- | 
 |  * read a long word by picking the least significant byte of each maiximum | 
 |  * port size word. Swap for ppc format. | 
 |  */ | 
 | ulong flash_read_long(flash_info_t * info, int sect,  uchar offset) | 
 | { | 
 |     uchar * addr; | 
 |  | 
 |     addr = flash_make_addr(info, sect, offset); | 
 |     return ( (addr[(2*info->portwidth) - 1] << 24 ) | (addr[(info->portwidth) -1] << 16) | | 
 | 	    (addr[(4*info->portwidth) - 1] << 8) | addr[(3*info->portwidth) - 1]); | 
 |  | 
 | } | 
 |  | 
 | /*----------------------------------------------------------------------- | 
 |  */ | 
 | unsigned long flash_init (void) | 
 | { | 
 | 	unsigned long size; | 
 | 	int i; | 
 | 	unsigned long  address; | 
 |  | 
 |  | 
 | 	/* The flash is positioned back to back, with the demultiplexing of the chip | 
 | 	 * based on the A24 address line. | 
 | 	 * | 
 | 	 */ | 
 |  | 
 | 	address = CFG_FLASH_BASE; | 
 | 	size = 0; | 
 |  | 
 | 	/* Init: no FLASHes known */ | 
 | 	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) { | 
 | 		flash_info[i].flash_id = FLASH_UNKNOWN; | 
 | 		size += flash_info[i].size = flash_get_size(address, i); | 
 | 		address += CFG_FLASH_INCREMENT; | 
 | 		if (flash_info[0].flash_id == FLASH_UNKNOWN) { | 
 | 			printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",i, | 
 | 				flash_info[0].size, flash_info[i].size<<20); | 
 | 		} | 
 | 	} | 
 |  | 
 | #if 0 /* test-only */ | 
 | 	/* Monitor protection ON by default */ | 
 | #if (CFG_MONITOR_BASE >= CFG_FLASH_BASE) | 
 | 	for(i=0; flash_info[0].start[i] < CFG_MONITOR_BASE+CFG_MONITOR_LEN-1; i++) | 
 | 		(void)flash_real_protect(&flash_info[0], i, 1); | 
 | #endif | 
 | #else | 
 | 	/* monitor protection ON by default */ | 
 | 	flash_protect (FLAG_PROTECT_SET, | 
 | 		       - CFG_MONITOR_LEN, | 
 | 		       - 1, &flash_info[1]); | 
 | #endif | 
 |  | 
 | 	return (size); | 
 | } | 
 |  | 
 | /*----------------------------------------------------------------------- | 
 |  */ | 
 | int flash_erase (flash_info_t *info, int s_first, int s_last) | 
 | { | 
 | 	int rcode = 0; | 
 | 	int prot; | 
 | 	int sect; | 
 |  | 
 | 	if( info->flash_id != FLASH_MAN_CFI) { | 
 | 		printf ("Can't erase unknown flash type - aborted\n"); | 
 | 		return 1; | 
 | 	} | 
 | 	if ((s_first < 0) || (s_first > s_last)) { | 
 | 		printf ("- no sectors to erase\n"); | 
 | 		return 1; | 
 | 	} | 
 |  | 
 | 	prot = 0; | 
 | 	for (sect=s_first; sect<=s_last; ++sect) { | 
 | 		if (info->protect[sect]) { | 
 | 			prot++; | 
 | 		} | 
 | 	} | 
 | 	if (prot) { | 
 | 		printf ("- Warning: %d protected sectors will not be erased!\n", | 
 | 			prot); | 
 | 	} else { | 
 | 		printf ("\n"); | 
 | 	} | 
 |  | 
 |  | 
 | 	for (sect = s_first; sect<=s_last; sect++) { | 
 | 		if (info->protect[sect] == 0) { /* not protected */ | 
 | 			flash_write_cmd(info, sect, 0, FLASH_CMD_CLEAR_STATUS); | 
 | 			flash_write_cmd(info, sect, 0, FLASH_CMD_BLOCK_ERASE); | 
 | 			flash_write_cmd(info, sect, 0, FLASH_CMD_ERASE_CONFIRM); | 
 |  | 
 | 			if(flash_full_status_check(info, sect, info->erase_blk_tout, "erase")) { | 
 | 				rcode = 1; | 
 | 			} else | 
 | 				printf("."); | 
 | 		} | 
 | 	} | 
 | 	printf (" done\n"); | 
 | 	return rcode; | 
 | } | 
 |  | 
 | /*----------------------------------------------------------------------- | 
 |  */ | 
 | void flash_print_info  (flash_info_t *info) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	if (info->flash_id != FLASH_MAN_CFI) { | 
 | 		printf ("missing or unknown FLASH type\n"); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	printf("CFI conformant FLASH (%d x %d)", | 
 | 	       (info->portwidth	 << 3 ), (info->chipwidth  << 3 )); | 
 | 	printf ("  Size: %ld MB in %d Sectors\n", | 
 | 		info->size >> 20, info->sector_count); | 
 | 	printf(" Erase timeout %ld ms, write timeout %ld ms, buffer write timeout %ld ms, buffer size %d\n", | 
 | 	       info->erase_blk_tout, info->write_tout, info->buffer_write_tout, info->buffer_size); | 
 |  | 
 | 	printf ("  Sector Start Addresses:"); | 
 | 	for (i=0; i<info->sector_count; ++i) { | 
 | #ifdef CFG_FLASH_EMPTY_INFO | 
 | 		int k; | 
 | 		int size; | 
 | 		int erased; | 
 | 		volatile unsigned long *flash; | 
 |  | 
 | 		/* | 
 | 		 * Check if whole sector is erased | 
 | 		 */ | 
 | 		if (i != (info->sector_count-1)) | 
 | 		  size = info->start[i+1] - info->start[i]; | 
 | 		else | 
 | 		  size = info->start[0] + info->size - info->start[i]; | 
 | 		erased = 1; | 
 | 		flash = (volatile unsigned long *)info->start[i]; | 
 | 		size = size >> 2;        /* divide by 4 for longword access */ | 
 | 		for (k=0; k<size; k++) | 
 | 		  { | 
 | 		    if (*flash++ != 0xffffffff) | 
 | 		      { | 
 | 			erased = 0; | 
 | 			break; | 
 | 		      } | 
 | 		  } | 
 |  | 
 | 		if ((i % 5) == 0) | 
 | 			printf ("\n   "); | 
 | 		/* print empty and read-only info */ | 
 | 		printf (" %08lX%s%s", | 
 | 			info->start[i], | 
 | 			erased ? " E" : "  ", | 
 | 			info->protect[i] ? "RO " : "   "); | 
 | #else | 
 | 		if ((i % 5) == 0) | 
 | 			printf ("\n   "); | 
 | 		printf (" %08lX%s", | 
 | 			info->start[i], | 
 | 			info->protect[i] ? " (RO)" : "     "); | 
 | #endif | 
 | 	} | 
 | 	printf ("\n"); | 
 | 	return; | 
 | } | 
 |  | 
 | /*----------------------------------------------------------------------- | 
 |  * Copy memory to flash, returns: | 
 |  * 0 - OK | 
 |  * 1 - write timeout | 
 |  * 2 - Flash not erased | 
 |  */ | 
 | int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) | 
 | { | 
 | 	ulong wp; | 
 | 	ulong cp; | 
 | 	int aln; | 
 | 	cfiword_t cword; | 
 | 	int i, rc; | 
 |  | 
 | 	/* get lower aligned address */ | 
 | 	wp = (addr & ~(info->portwidth - 1)); | 
 |  | 
 | 	/* handle unaligned start */ | 
 | 	if((aln = addr - wp) != 0) { | 
 | 		cword.l = 0; | 
 | 		cp = wp; | 
 | 		for(i=0;i<aln; ++i, ++cp) | 
 | 			flash_add_byte(info, &cword, (*(uchar *)cp)); | 
 |  | 
 | 		for(; (i< info->portwidth) && (cnt > 0) ; i++) { | 
 | 			flash_add_byte(info, &cword, *src++); | 
 | 			cnt--; | 
 | 			cp++; | 
 | 		} | 
 | 		for(; (cnt == 0) && (i < info->portwidth); ++i, ++cp) | 
 | 			flash_add_byte(info, &cword, (*(uchar *)cp)); | 
 | 		if((rc = flash_write_cfiword(info, wp, cword)) != 0) | 
 | 			return rc; | 
 | 		wp = cp; | 
 | 	} | 
 |  | 
 | #ifdef CFG_FLASH_USE_BUFFER_WRITE | 
 | 	while(cnt >= info->portwidth) { | 
 | 		i = info->buffer_size > cnt? cnt: info->buffer_size; | 
 | 		if((rc = flash_write_cfibuffer(info, wp, src,i)) != ERR_OK) | 
 | 			return rc; | 
 | 		wp += i; | 
 | 		src += i; | 
 | 		cnt -=i; | 
 | 	} | 
 | #else | 
 | 	/* handle the aligned part */ | 
 | 	while(cnt >= info->portwidth) { | 
 | 		cword.l = 0; | 
 | 		for(i = 0; i < info->portwidth; i++) { | 
 | 			flash_add_byte(info, &cword, *src++); | 
 | 		} | 
 | 		if((rc = flash_write_cfiword(info, wp, cword)) != 0) | 
 | 			return rc; | 
 | 		wp += info->portwidth; | 
 | 		cnt -= info->portwidth; | 
 | 	} | 
 | #endif /* CFG_FLASH_USE_BUFFER_WRITE */ | 
 | 	if (cnt == 0) { | 
 | 		return (0); | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * handle unaligned tail bytes | 
 | 	 */ | 
 | 	cword.l = 0; | 
 | 	for (i=0, cp=wp; (i<info->portwidth) && (cnt>0); ++i, ++cp) { | 
 | 		flash_add_byte(info, &cword, *src++); | 
 | 		--cnt; | 
 | 	} | 
 | 	for (; i<info->portwidth; ++i, ++cp) { | 
 | 		flash_add_byte(info, & cword, (*(uchar *)cp)); | 
 | 	} | 
 |  | 
 | 	return flash_write_cfiword(info, wp, cword); | 
 | } | 
 |  | 
 | /*----------------------------------------------------------------------- | 
 |  */ | 
 | int flash_real_protect(flash_info_t *info, long sector, int prot) | 
 | { | 
 | 	int retcode = 0; | 
 |  | 
 | 	flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS); | 
 | 	flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT); | 
 | 	if(prot) | 
 | 		flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT_SET); | 
 | 	else | 
 | 		flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT_CLEAR); | 
 |  | 
 | 	if((retcode = flash_full_status_check(info, sector, info->erase_blk_tout, | 
 | 					 prot?"protect":"unprotect")) == 0) { | 
 |  | 
 | 		info->protect[sector] = prot; | 
 | 		/* Intel's unprotect unprotects all locking */ | 
 | 		if(prot == 0) { | 
 | 			int i; | 
 | 			for(i = 0 ; i<info->sector_count; i++) { | 
 | 				if(info->protect[i]) | 
 | 					flash_real_protect(info, i, 1); | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return retcode; | 
 | } | 
 | /*----------------------------------------------------------------------- | 
 |  *  wait for XSR.7 to be set. Time out with an error if it does not. | 
 |  *  This routine does not set the flash to read-array mode. | 
 |  */ | 
 | static int flash_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt) | 
 | { | 
 | 	ulong start; | 
 |  | 
 | 	/* Wait for command completion */ | 
 | 	start = get_timer (0); | 
 | 	while(!flash_isset(info, sector, 0, FLASH_STATUS_DONE)) { | 
 | 		if (get_timer(start) > info->erase_blk_tout) { | 
 | 			printf("Flash %s timeout at address %lx\n", prompt, info->start[sector]); | 
 | 			flash_write_cmd(info, sector, 0, FLASH_CMD_RESET); | 
 | 			return ERR_TIMOUT; | 
 | 		} | 
 | 	} | 
 | 	return ERR_OK; | 
 | } | 
 | /*----------------------------------------------------------------------- | 
 |  * Wait for XSR.7 to be set, if it times out print an error, otherwise do a full status check. | 
 |  * This routine sets the flash to read-array mode. | 
 |  */ | 
 | static int flash_full_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt) | 
 | { | 
 | 	int retcode; | 
 | 	retcode = flash_status_check(info, sector, tout, prompt); | 
 | 	if((retcode == ERR_OK) && !flash_isequal(info,sector, 0, FLASH_STATUS_DONE)) { | 
 | 		retcode = ERR_INVAL; | 
 | 		printf("Flash %s error at address %lx\n", prompt,info->start[sector]); | 
 | 		if(flash_isset(info, sector, 0, FLASH_STATUS_ECLBS | FLASH_STATUS_PSLBS)){ | 
 | 			printf("Command Sequence Error.\n"); | 
 | 		} else if(flash_isset(info, sector, 0, FLASH_STATUS_ECLBS)){ | 
 | 			printf("Block Erase Error.\n"); | 
 | 			retcode = ERR_NOT_ERASED; | 
 | 		} else if (flash_isset(info, sector, 0, FLASH_STATUS_PSLBS)) { | 
 | 			printf("Locking Error\n"); | 
 | 		} | 
 | 		if(flash_isset(info, sector, 0, FLASH_STATUS_DPS)){ | 
 | 			printf("Block locked.\n"); | 
 | 			retcode = ERR_PROTECTED; | 
 | 		} | 
 | 		if(flash_isset(info, sector, 0, FLASH_STATUS_VPENS)) | 
 | 			printf("Vpp Low Error.\n"); | 
 | 	} | 
 | 	flash_write_cmd(info, sector, 0, FLASH_CMD_RESET); | 
 | 	return retcode; | 
 | } | 
 | /*----------------------------------------------------------------------- | 
 |  */ | 
 | static void flash_add_byte(flash_info_t *info, cfiword_t * cword, uchar c) | 
 | { | 
 | 	switch(info->portwidth) { | 
 | 	case FLASH_CFI_8BIT: | 
 | 		cword->c = c; | 
 | 		break; | 
 | 	case FLASH_CFI_16BIT: | 
 | 		cword->w = (cword->w << 8) | c; | 
 | 		break; | 
 | 	case FLASH_CFI_32BIT: | 
 | 		cword->l = (cword->l << 8) | c; | 
 | 	} | 
 | } | 
 |  | 
 |  | 
 | /*----------------------------------------------------------------------- | 
 |  * make a proper sized command based on the port and chip widths | 
 |  */ | 
 | static void flash_make_cmd(flash_info_t * info, uchar cmd, void * cmdbuf) | 
 | { | 
 | 	int i; | 
 | 	uchar *cp = (uchar *)cmdbuf; | 
 | 	for(i=0; i< info->portwidth; i++) | 
 | 		*cp++ = ((i+1) % info->chipwidth) ? '\0':cmd; | 
 | } | 
 |  | 
 | /* | 
 |  * Write a proper sized command to the correct address | 
 |  */ | 
 | static void flash_write_cmd(flash_info_t * info, int sect, uchar offset, uchar cmd) | 
 | { | 
 |  | 
 | 	volatile cfiptr_t addr; | 
 | 	cfiword_t cword; | 
 | 	addr.cp = flash_make_addr(info, sect, offset); | 
 | 	flash_make_cmd(info, cmd, &cword); | 
 | 	switch(info->portwidth) { | 
 | 	case FLASH_CFI_8BIT: | 
 | 		*addr.cp = cword.c; | 
 | 		break; | 
 | 	case FLASH_CFI_16BIT: | 
 | 		*addr.wp = cword.w; | 
 | 		break; | 
 | 	case FLASH_CFI_32BIT: | 
 | 		*addr.lp = cword.l; | 
 | 		break; | 
 | 	} | 
 | } | 
 |  | 
 | /*----------------------------------------------------------------------- | 
 |  */ | 
 | static int flash_isequal(flash_info_t * info, int sect, uchar offset, uchar cmd) | 
 | { | 
 | 	cfiptr_t cptr; | 
 | 	cfiword_t cword; | 
 | 	int retval; | 
 | 	cptr.cp = flash_make_addr(info, sect, offset); | 
 | 	flash_make_cmd(info, cmd, &cword); | 
 | 	switch(info->portwidth) { | 
 | 	case FLASH_CFI_8BIT: | 
 | 		retval = (cptr.cp[0] == cword.c); | 
 | 		break; | 
 | 	case FLASH_CFI_16BIT: | 
 | 		retval = (cptr.wp[0] == cword.w); | 
 | 		break; | 
 | 	case FLASH_CFI_32BIT: | 
 | 		retval = (cptr.lp[0] == cword.l); | 
 | 		break; | 
 | 	default: | 
 | 		retval = 0; | 
 | 		break; | 
 | 	} | 
 | 	return retval; | 
 | } | 
 | /*----------------------------------------------------------------------- | 
 |  */ | 
 | static int flash_isset(flash_info_t * info, int sect, uchar offset, uchar cmd) | 
 | { | 
 | 	cfiptr_t cptr; | 
 | 	cfiword_t cword; | 
 | 	int retval; | 
 | 	cptr.cp = flash_make_addr(info, sect, offset); | 
 | 	flash_make_cmd(info, cmd, &cword); | 
 | 	switch(info->portwidth) { | 
 | 	case FLASH_CFI_8BIT: | 
 | 		retval = ((cptr.cp[0] & cword.c) == cword.c); | 
 | 		break; | 
 | 	case FLASH_CFI_16BIT: | 
 | 		retval = ((cptr.wp[0] & cword.w) == cword.w); | 
 | 		break; | 
 | 	case FLASH_CFI_32BIT: | 
 | 		retval = ((cptr.lp[0] & cword.l) == cword.l); | 
 | 		break; | 
 | 	default: | 
 | 		retval = 0; | 
 | 		break; | 
 | 	} | 
 | 	return retval; | 
 | } | 
 |  | 
 | /*----------------------------------------------------------------------- | 
 |  * detect if flash is compatible with the Common Flash Interface (CFI) | 
 |  * http://www.jedec.org/download/search/jesd68.pdf | 
 |  * | 
 | */ | 
 | static int flash_detect_cfi(flash_info_t * info) | 
 | { | 
 |  | 
 | 	for(info->portwidth=FLASH_CFI_8BIT; info->portwidth <= FLASH_CFI_32BIT; | 
 | 	    info->portwidth <<= 1) { | 
 | 		for(info->chipwidth =FLASH_CFI_BY8; | 
 | 		    info->chipwidth <= info->portwidth; | 
 | 		    info->chipwidth <<= 1) { | 
 | 			flash_write_cmd(info, 0, 0, FLASH_CMD_RESET); | 
 | 			flash_write_cmd(info, 0, FLASH_OFFSET_CFI, FLASH_CMD_CFI); | 
 | 			if(flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP,'Q') && | 
 | 			   flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 1, 'R') && | 
 | 			   flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 2, 'Y')) | 
 | 				return 1; | 
 | 		} | 
 | 	} | 
 | 	return 0; | 
 | } | 
 | /* | 
 |  * The following code cannot be run from FLASH! | 
 |  * | 
 |  */ | 
 | static ulong flash_get_size (ulong base, int banknum) | 
 | { | 
 | 	flash_info_t * info = &flash_info[banknum]; | 
 | 	int i, j; | 
 | 	int sect_cnt; | 
 | 	unsigned long sector; | 
 | 	unsigned long tmp; | 
 | 	int size_ratio; | 
 | 	uchar num_erase_regions; | 
 | 	int  erase_region_size; | 
 | 	int  erase_region_count; | 
 |  | 
 | 	info->start[0] = base; | 
 |  | 
 | 	if(flash_detect_cfi(info)){ | 
 | #ifdef DEBUG_FLASH | 
 | 		printf("portwidth=%d chipwidth=%d\n", info->portwidth, info->chipwidth); /* test-only */ | 
 | #endif | 
 | 		size_ratio = info->portwidth / info->chipwidth; | 
 | 		num_erase_regions = flash_read_uchar(info, FLASH_OFFSET_NUM_ERASE_REGIONS); | 
 | #ifdef DEBUG_FLASH | 
 | 		printf("found %d erase regions\n", num_erase_regions); | 
 | #endif | 
 | 		sect_cnt = 0; | 
 | 		sector = base; | 
 | 		for(i = 0 ; i < num_erase_regions; i++) { | 
 | 			if(i > NUM_ERASE_REGIONS) { | 
 | 				printf("%d erase regions found, only %d used\n", | 
 | 				       num_erase_regions, NUM_ERASE_REGIONS); | 
 | 				break; | 
 | 			} | 
 | 			tmp = flash_read_long(info, 0, FLASH_OFFSET_ERASE_REGIONS); | 
 | 			erase_region_size = (tmp & 0xffff)? ((tmp & 0xffff) * 256): 128; | 
 | 			tmp >>= 16; | 
 | 			erase_region_count = (tmp & 0xffff) +1; | 
 | 			for(j = 0; j< erase_region_count; j++) { | 
 | 				info->start[sect_cnt] = sector; | 
 | 				sector += (erase_region_size * size_ratio); | 
 | 				info->protect[sect_cnt] = flash_isset(info, sect_cnt, FLASH_OFFSET_PROTECT, FLASH_STATUS_PROTECT); | 
 | 				sect_cnt++; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		info->sector_count = sect_cnt; | 
 | 		/* multiply the size by the number of chips */ | 
 | 		info->size = (1 << flash_read_uchar(info, FLASH_OFFSET_SIZE)) * size_ratio; | 
 | 		info->buffer_size = (1 << flash_read_ushort(info, 0, FLASH_OFFSET_BUFFER_SIZE)); | 
 | 		tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_ETOUT); | 
 | 		info->erase_blk_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_EMAX_TOUT))); | 
 | 		tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_WBTOUT); | 
 | 		info->buffer_write_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_WBMAX_TOUT))); | 
 | 		tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_WTOUT); | 
 | 		info->write_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_WMAX_TOUT)))/ 1000; | 
 | 		info->flash_id = FLASH_MAN_CFI; | 
 | 	} | 
 |  | 
 | 	flash_write_cmd(info, 0, 0, FLASH_CMD_RESET); | 
 | 	return(info->size); | 
 | } | 
 |  | 
 |  | 
 | /*----------------------------------------------------------------------- | 
 |  */ | 
 | static int flash_write_cfiword (flash_info_t *info, ulong dest, cfiword_t cword) | 
 | { | 
 |  | 
 | 	cfiptr_t ctladdr; | 
 | 	cfiptr_t cptr; | 
 | 	int flag; | 
 |  | 
 | 	ctladdr.cp = flash_make_addr(info, 0, 0); | 
 | 	cptr.cp = (uchar *)dest; | 
 |  | 
 |  | 
 | 	/* Check if Flash is (sufficiently) erased */ | 
 | 	switch(info->portwidth) { | 
 | 	case FLASH_CFI_8BIT: | 
 | 		flag = ((cptr.cp[0] & cword.c) == cword.c); | 
 | 		break; | 
 | 	case FLASH_CFI_16BIT: | 
 | 		flag = ((cptr.wp[0] & cword.w) == cword.w); | 
 | 		break; | 
 | 	case FLASH_CFI_32BIT: | 
 | 		flag = ((cptr.lp[0] & cword.l)	== cword.l); | 
 | 		break; | 
 | 	default: | 
 | 		return 2; | 
 | 	} | 
 | 	if(!flag) | 
 | 		return 2; | 
 |  | 
 | 	/* Disable interrupts which might cause a timeout here */ | 
 | 	flag = disable_interrupts(); | 
 |  | 
 | 	flash_write_cmd(info, 0, 0, FLASH_CMD_CLEAR_STATUS); | 
 | 	flash_write_cmd(info, 0, 0, FLASH_CMD_WRITE); | 
 |  | 
 | 	switch(info->portwidth) { | 
 | 	case FLASH_CFI_8BIT: | 
 | 		cptr.cp[0] = cword.c; | 
 | 		break; | 
 | 	case FLASH_CFI_16BIT: | 
 | 		cptr.wp[0] = cword.w; | 
 | 		break; | 
 | 	case FLASH_CFI_32BIT: | 
 | 		cptr.lp[0] = cword.l; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	/* re-enable interrupts if necessary */ | 
 | 	if(flag) | 
 | 		enable_interrupts(); | 
 |  | 
 | 	return flash_full_status_check(info, 0, info->write_tout, "write"); | 
 | } | 
 |  | 
 | #ifdef CFG_FLASH_USE_BUFFER_WRITE | 
 |  | 
 | /* loop through the sectors from the highest address | 
 |  * when the passed address is greater or equal to the sector address | 
 |  * we have a match | 
 |  */ | 
 | static int find_sector(flash_info_t *info, ulong addr) | 
 | { | 
 | 	int sector; | 
 | 	for(sector = info->sector_count - 1; sector >= 0; sector--) { | 
 | 		if(addr >= info->start[sector]) | 
 | 			break; | 
 | 	} | 
 | 	return sector; | 
 | } | 
 |  | 
 | static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp, int len) | 
 | { | 
 |  | 
 | 	int sector; | 
 | 	int cnt; | 
 | 	int retcode; | 
 | 	volatile cfiptr_t src; | 
 | 	volatile cfiptr_t dst; | 
 |  | 
 | 	src.cp = cp; | 
 | 	dst.cp = (uchar *)dest; | 
 | 	sector = find_sector(info, dest); | 
 | 	flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS); | 
 | 	flash_write_cmd(info, sector, 0, FLASH_CMD_WRITE_TO_BUFFER); | 
 | 	if((retcode = flash_status_check(info, sector, info->buffer_write_tout, | 
 | 					 "write to buffer")) == ERR_OK) { | 
 | 		switch(info->portwidth) { | 
 | 		case FLASH_CFI_8BIT: | 
 | 			cnt = len; | 
 | 			break; | 
 | 		case FLASH_CFI_16BIT: | 
 | 			cnt = len >> 1; | 
 | 			break; | 
 | 		case FLASH_CFI_32BIT: | 
 | 			cnt = len >> 2; | 
 | 			break; | 
 | 		default: | 
 | 			return ERR_INVAL; | 
 | 			break; | 
 | 		} | 
 | 		flash_write_cmd(info, sector, 0, (uchar)cnt-1); | 
 | 		while(cnt-- > 0) { | 
 | 			switch(info->portwidth) { | 
 | 			case FLASH_CFI_8BIT: | 
 | 				*dst.cp++ = *src.cp++; | 
 | 				break; | 
 | 			case FLASH_CFI_16BIT: | 
 | 				*dst.wp++ = *src.wp++; | 
 | 				break; | 
 | 			case FLASH_CFI_32BIT: | 
 | 				*dst.lp++ = *src.lp++; | 
 | 				break; | 
 | 			default: | 
 | 				return ERR_INVAL; | 
 | 				break; | 
 | 			} | 
 | 		} | 
 | 		flash_write_cmd(info, sector, 0, FLASH_CMD_WRITE_BUFFER_CONFIRM); | 
 | 		retcode = flash_full_status_check(info, sector, info->buffer_write_tout, | 
 | 					     "buffer write"); | 
 | 	} | 
 | 	flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS); | 
 | 	return retcode; | 
 | } | 
 | #endif /* CFG_USE_FLASH_BUFFER_WRITE */ |