| /* | |
| * (C) Copyright 2003 | |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. | |
| * | |
| * See file CREDITS for list of people who contributed to this | |
| * project. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation; either version 2 of | |
| * the License, or (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
| * MA 02111-1307 USA | |
| */ | |
| #define GPIO_CPU_LED GPIO_3 | |
| #define CPLD_BASE 0x10000000 /* t.b.m. */ | |
| #define DEBUG_LEDS_ADDR CPLD_BASE + 0x01 | |
| #define HW_ID_ADDR CPLD_BASE + 0x02 | |
| #define DIP_SWITCH_ADDR CPLD_BASE + 0x04 | |
| #define PHY_CTRL_ADDR CPLD_BASE + 0x05 | |
| #define SPI_OUT_ADDR CPLD_BASE + 0x07 | |
| #define SPI_IN_ADDR CPLD_BASE + 0x08 | |
| #define MDIO_OUT_ADDR CPLD_BASE + 0x09 | |
| #define MDIO_IN_ADDR CPLD_BASE + 0x0A | |
| #define MISC_OUT_ADDR CPLD_BASE + 0x0B | |
| /* Addresses used on I2C bus */ | |
| #define LM75_CHIP_ADDR 0x9C | |
| #define LM75_CPU_ADDR 0x9E | |
| #define SDRAM_SPD_ADDR 0xA0 | |
| #define SDRAM_SPD_WRITE_ADDRESS (SDRAM_SPD_ADDR) | |
| #define SDRAM_SPD_READ_ADDRESS (SDRAM_SPD_ADDR+1) | |
| #ifndef FALSE | |
| #define FALSE 0 | |
| #endif | |
| #ifndef TRUE | |
| #define TRUE 1 | |
| #endif |