| /* | 
 |  * (C) Copyright 2000 | 
 |  * Wolfgang Denk, DENX Software Engineering, wd@denx.de. | 
 |  * | 
 |  * See file CREDITS for list of people who contributed to this | 
 |  * project. | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or | 
 |  * modify it under the terms of the GNU General Public License as | 
 |  * published by the Free Software Foundation; either version 2 of | 
 |  * the License, or (at your option) any later version. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program; if not, write to the Free Software | 
 |  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | 
 |  * MA 02111-1307 USA | 
 |  */ | 
 |  | 
 | #include <common.h> | 
 | #include <mpc8xx.h> | 
 |  | 
 | flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/ | 
 |  | 
 | #if defined(CONFIG_ENV_IS_IN_FLASH) | 
 | # ifndef  CONFIG_ENV_ADDR | 
 | #  define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) | 
 | # endif | 
 | # ifndef  CONFIG_ENV_SIZE | 
 | #  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE | 
 | # endif | 
 | # ifndef  CONFIG_ENV_SECT_SIZE | 
 | #  define CONFIG_ENV_SECT_SIZE  CONFIG_ENV_SIZE | 
 | # endif | 
 | #endif | 
 |  | 
 | /*----------------------------------------------------------------------- | 
 |  * Functions | 
 |  */ | 
 | static ulong flash_get_size (vu_long *addr, flash_info_t *info); | 
 | static int write_data (flash_info_t *info, ulong dest, ulong data); | 
 | static void flash_get_offsets (ulong base, flash_info_t *info); | 
 |  | 
 | /*----------------------------------------------------------------------- | 
 |  */ | 
 |  | 
 | unsigned long flash_init (void) | 
 | { | 
 | 	volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR; | 
 | 	volatile memctl8xx_t *memctl = &immap->im_memctl; | 
 | 	unsigned long size_b0; | 
 | 	int i; | 
 |  | 
 | 	/* Init: no FLASHes known */ | 
 | 	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) { | 
 | 		flash_info[i].flash_id = FLASH_UNKNOWN; | 
 | 	} | 
 |  | 
 | 	/* Static FLASH Bank configuration here - FIXME XXX */ | 
 |  | 
 | 	size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]); | 
 |  | 
 | 	if (flash_info[0].flash_id == FLASH_UNKNOWN) { | 
 | 		printf ("## Unknown FLASH on Bank 0: " | 
 | 			"ID 0x%lx, Size = 0x%08lx = %ld MB\n", | 
 | 			flash_info[0].flash_id, | 
 | 			size_b0, size_b0<<20); | 
 | 	} | 
 |  | 
 | 	/* Remap FLASH according to real size */ | 
 | 	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000); | 
 | 	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | \ | 
 | 				BR_MS_GPCM | BR_PS_16 | BR_V; | 
 |  | 
 | 	/* Re-do sizing to get full correct info */ | 
 | 	size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]); | 
 |  | 
 | 	flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]); | 
 |  | 
 | 	flash_info[0].size = size_b0; | 
 |  | 
 | #if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE | 
 | 	/* monitor protection ON by default */ | 
 | 	flash_protect(FLAG_PROTECT_SET, | 
 | 		      CONFIG_SYS_MONITOR_BASE, | 
 | 		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, | 
 | 		      &flash_info[0]); | 
 | #endif | 
 |  | 
 | #ifdef	CONFIG_ENV_IS_IN_FLASH | 
 | 	/* ENV protection ON by default */ | 
 | 	flash_protect(FLAG_PROTECT_SET, | 
 | 		      CONFIG_ENV_ADDR, | 
 | 		      CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1, | 
 | 		      &flash_info[0]); | 
 | #endif | 
 |  | 
 | 	return (size_b0); | 
 | } | 
 |  | 
 | /*----------------------------------------------------------------------- | 
 |  */ | 
 | static void flash_get_offsets (ulong base, flash_info_t *info) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	if (info->flash_id == FLASH_UNKNOWN) { | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	switch (info->flash_id & FLASH_VENDMASK) { | 
 | 	case FLASH_MAN_MT: | 
 | 	    if (info->flash_id & FLASH_BTYPE) { | 
 | 		/* set sector offsets for bottom boot block type	*/ | 
 | 		info->start[0] = base + 0x00000000; | 
 | 		info->start[1] = base + 0x00004000; | 
 | 		info->start[2] = base + 0x00006000; | 
 | 		info->start[3] = base + 0x00008000; | 
 | 		for (i = 4; i < info->sector_count; i++) { | 
 | 			info->start[i] = base + ((i-3) * 0x00020000); | 
 | 		} | 
 | 	    } else { | 
 | 		/* set sector offsets for top boot block type		*/ | 
 | 		i = info->sector_count - 1; | 
 | 		info->start[i--] = base + info->size - 0x00004000; | 
 | 		info->start[i--] = base + info->size - 0x00006000; | 
 | 		info->start[i--] = base + info->size - 0x00008000; | 
 | 		for (; i >= 0; i--) { | 
 | 			info->start[i] = base + i * 0x00020000; | 
 | 		} | 
 | 	    } | 
 | 	    return; | 
 |  | 
 | 	case FLASH_MAN_SST: | 
 | 	    for (i = 0; i < info->sector_count; i++) { | 
 | 		info->start[i] = base + (i * 0x00002000); | 
 | 	    } | 
 | 	    return; | 
 |  | 
 | 	case FLASH_MAN_AMD: | 
 | 	case FLASH_MAN_FUJ: | 
 |  | 
 | 	    /* set up sector start address table */ | 
 | 	    if (info->flash_id & FLASH_BTYPE) { | 
 | 		/* set sector offsets for bottom boot block type	*/ | 
 | 		info->start[0] = base + 0x00000000; | 
 | 		info->start[1] = base + 0x00008000; | 
 | 		info->start[2] = base + 0x0000C000; | 
 | 		info->start[3] = base + 0x00010000; | 
 | 		for (i = 4; i < info->sector_count; i++) { | 
 | 			info->start[i] = base + (i * 0x00020000) - 0x00060000; | 
 | 		} | 
 | 	    } else { | 
 | 		/* set sector offsets for top boot block type		*/ | 
 | 		i = info->sector_count - 1; | 
 | 		info->start[i--] = base + info->size - 0x00008000; | 
 | 		info->start[i--] = base + info->size - 0x0000C000; | 
 | 		info->start[i--] = base + info->size - 0x00010000; | 
 | 		for (; i >= 0; i--) { | 
 | 			info->start[i] = base + i * 0x00020000; | 
 | 		} | 
 | 	    } | 
 | 	    return; | 
 | 	default: | 
 | 	    printf ("Don't know sector ofsets for flash type 0x%lx\n", | 
 | 		info->flash_id); | 
 | 	    return; | 
 | 	} | 
 | } | 
 |  | 
 | /*----------------------------------------------------------------------- | 
 |  */ | 
 | void flash_print_info  (flash_info_t *info) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	if (info->flash_id == FLASH_UNKNOWN) { | 
 | 		printf ("missing or unknown FLASH type\n"); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	switch (info->flash_id & FLASH_VENDMASK) { | 
 | 	case FLASH_MAN_AMD:	printf ("AMD ");		break; | 
 | 	case FLASH_MAN_FUJ:	printf ("Fujitsu ");		break; | 
 | 	case FLASH_MAN_SST:	printf ("SST ");		break; | 
 | 	case FLASH_MAN_STM:	printf ("STM ");		break; | 
 | 	case FLASH_MAN_MT:	printf ("MT ");			break; | 
 | 	case FLASH_MAN_INTEL:	printf ("Intel ");		break; | 
 | 	default:		printf ("Unknown Vendor ");	break; | 
 | 	} | 
 |  | 
 | 	switch (info->flash_id & FLASH_TYPEMASK) { | 
 | 	case FLASH_AM400B:	printf ("AM29LV400B (4 Mbit, bottom boot sect)\n"); | 
 | 				break; | 
 | 	case FLASH_AM400T:	printf ("AM29LV400T (4 Mbit, top boot sector)\n"); | 
 | 				break; | 
 | 	case FLASH_AM800B:	printf ("AM29LV800B (8 Mbit, bottom boot sect)\n"); | 
 | 				break; | 
 | 	case FLASH_AM800T:	printf ("AM29LV800T (8 Mbit, top boot sector)\n"); | 
 | 				break; | 
 | 	case FLASH_AM160B:	printf ("AM29LV160B (16 Mbit, bottom boot sect)\n"); | 
 | 				break; | 
 | 	case FLASH_AM160T:	printf ("AM29LV160T (16 Mbit, top boot sector)\n"); | 
 | 				break; | 
 | 	case FLASH_AM320B:	printf ("AM29LV320B (32 Mbit, bottom boot sect)\n"); | 
 | 				break; | 
 | 	case FLASH_AM320T:	printf ("AM29LV320T (32 Mbit, top boot sector)\n"); | 
 | 				break; | 
 | 	case FLASH_SST200A:	printf ("39xF200A (2M = 128K x 16)\n"); | 
 | 				break; | 
 | 	case FLASH_SST400A:	printf ("39xF400A (4M = 256K x 16)\n"); | 
 | 				break; | 
 | 	case FLASH_SST800A:	printf ("39xF800A (8M = 512K x 16)\n"); | 
 | 				break; | 
 | 	case FLASH_STM800AB:	printf ("M29W800AB (8M = 512K x 16)\n"); | 
 | 				break; | 
 | 	case FLASH_28F008S5:	printf ("28F008S5 (1M = 64K x 16)\n"); | 
 | 				break; | 
 | 	case FLASH_28F400_T:	printf ("28F400B3 (4Mbit, top boot sector)\n"); | 
 | 				break; | 
 | 	case FLASH_28F400_B:	printf ("28F400B3 (4Mbit, bottom boot sector)\n"); | 
 | 				break; | 
 | 	default:		printf ("Unknown Chip Type\n"); | 
 | 				break; | 
 | 	} | 
 |  | 
 | 	if (info->size >= (1 << 20)) { | 
 | 		i = 20; | 
 | 	} else { | 
 | 		i = 10; | 
 | 	} | 
 | 	printf ("  Size: %ld %cB in %d Sectors\n", | 
 | 		info->size >> i, | 
 | 		(i == 20) ? 'M' : 'k', | 
 | 		info->sector_count); | 
 |  | 
 | 	printf ("  Sector Start Addresses:"); | 
 | 	for (i=0; i<info->sector_count; ++i) { | 
 | 		if ((i % 5) == 0) | 
 | 			printf ("\n   "); | 
 | 		printf (" %08lX%s", | 
 | 			info->start[i], | 
 | 			info->protect[i] ? " (RO)" : "     " | 
 | 		); | 
 | 	} | 
 | 	printf ("\n"); | 
 | 	return; | 
 | } | 
 |  | 
 | /*----------------------------------------------------------------------- | 
 |  */ | 
 |  | 
 |  | 
 | /*----------------------------------------------------------------------- | 
 |  */ | 
 |  | 
 | /* | 
 |  * The following code cannot be run from FLASH! | 
 |  */ | 
 |  | 
 | static ulong flash_get_size (vu_long *addr, flash_info_t *info) | 
 | { | 
 | 	ushort value; | 
 | 	vu_short *saddr = (vu_short *)addr; | 
 |  | 
 | 	/* Read Manufacturer ID */ | 
 | 	saddr[0] = 0x0090; | 
 | 	value = saddr[0]; | 
 |  | 
 | 	switch (value) { | 
 | 	case (AMD_MANUFACT & 0xFFFF): | 
 | 		info->flash_id = FLASH_MAN_AMD; | 
 | 		break; | 
 | 	case (FUJ_MANUFACT & 0xFFFF): | 
 | 		info->flash_id = FLASH_MAN_FUJ; | 
 | 		break; | 
 | 	case (SST_MANUFACT & 0xFFFF): | 
 | 		info->flash_id = FLASH_MAN_SST; | 
 | 		break; | 
 | 	case (STM_MANUFACT & 0xFFFF): | 
 | 		info->flash_id = FLASH_MAN_STM; | 
 | 		break; | 
 | 	case (MT_MANUFACT & 0xFFFF): | 
 | 		info->flash_id = FLASH_MAN_MT; | 
 | 		break; | 
 | 	default: | 
 | 		info->flash_id = FLASH_UNKNOWN; | 
 | 		info->sector_count = 0; | 
 | 		info->size = 0; | 
 | 		saddr[0] = 0x00FF;		/* restore read mode */ | 
 | 		return (0);			/* no or unknown flash	*/ | 
 | 	} | 
 |  | 
 | 	value = saddr[1];			/* device ID		*/ | 
 |  | 
 | 	switch (value) { | 
 | 	case (AMD_ID_LV400T & 0xFFFF): | 
 | 		info->flash_id += FLASH_AM400T; | 
 | 		info->sector_count = 11; | 
 | 		info->size = 0x00100000; | 
 | 		break;				/* => 1 MB		*/ | 
 |  | 
 | 	case (AMD_ID_LV400B & 0xFFFF): | 
 | 		info->flash_id += FLASH_AM400B; | 
 | 		info->sector_count = 11; | 
 | 		info->size = 0x00100000; | 
 | 		break;				/* => 1 MB		*/ | 
 |  | 
 | 	case (AMD_ID_LV800T & 0xFFFF): | 
 | 		info->flash_id += FLASH_AM800T; | 
 | 		info->sector_count = 19; | 
 | 		info->size = 0x00200000; | 
 | 		break;				/* => 2 MB		*/ | 
 |  | 
 | 	case (AMD_ID_LV800B & 0xFFFF): | 
 | 		info->flash_id += FLASH_AM800B; | 
 | 		info->sector_count = 19; | 
 | 		info->size = 0x00200000; | 
 | 		break;				/* => 2 MB		*/ | 
 |  | 
 | 	case (AMD_ID_LV160T & 0xFFFF): | 
 | 		info->flash_id += FLASH_AM160T; | 
 | 		info->sector_count = 35; | 
 | 		info->size = 0x00400000; | 
 | 		break;				/* => 4 MB		*/ | 
 |  | 
 | 	case (AMD_ID_LV160B & 0xFFFF): | 
 | 		info->flash_id += FLASH_AM160B; | 
 | 		info->sector_count = 35; | 
 | 		info->size = 0x00400000; | 
 | 		break;				/* => 4 MB		*/ | 
 | #if 0	/* enable when device IDs are available */ | 
 | 	case (AMD_ID_LV320T & 0xFFFF): | 
 | 		info->flash_id += FLASH_AM320T; | 
 | 		info->sector_count = 67; | 
 | 		info->size = 0x00800000; | 
 | 		break;				/* => 8 MB		*/ | 
 |  | 
 | 	case (AMD_ID_LV320B & 0xFFFF): | 
 | 		info->flash_id += FLASH_AM320B; | 
 | 		info->sector_count = 67; | 
 | 		info->size = 0x00800000; | 
 | 		break;				/* => 8 MB		*/ | 
 | #endif | 
 | 	case (SST_ID_xF200A & 0xFFFF): | 
 | 		info->flash_id += FLASH_SST200A; | 
 | 		info->sector_count = 64;	/* 39xF200A ID ( 2M = 128K x 16	) */ | 
 | 		info->size = 0x00080000; | 
 | 		break; | 
 | 	case (SST_ID_xF400A & 0xFFFF): | 
 | 		info->flash_id += FLASH_SST400A; | 
 | 		info->sector_count = 128;	/* 39xF400A ID ( 4M = 256K x 16	) */ | 
 | 		info->size = 0x00100000; | 
 | 		break; | 
 | 	case (SST_ID_xF800A & 0xFFFF): | 
 | 		info->flash_id += FLASH_SST800A; | 
 | 		info->sector_count = 256;	/* 39xF800A ID ( 8M = 512K x 16	) */ | 
 | 		info->size = 0x00200000; | 
 | 		break;				/* => 2 MB		*/ | 
 | 	case (STM_ID_x800AB & 0xFFFF): | 
 | 		info->flash_id += FLASH_STM800AB; | 
 | 		info->sector_count = 19; | 
 | 		info->size = 0x00200000; | 
 | 		break;				/* => 2 MB		*/ | 
 | 	case (MT_ID_28F400_T & 0xFFFF): | 
 | 		info->flash_id += FLASH_28F400_T; | 
 | 		info->sector_count = 7; | 
 | 		info->size = 0x00080000; | 
 | 		break;				/* => 512 kB		*/ | 
 | 	case (MT_ID_28F400_B & 0xFFFF): | 
 | 		info->flash_id += FLASH_28F400_B; | 
 | 		info->sector_count = 7; | 
 | 		info->size = 0x00080000; | 
 | 		break;				/* => 512 kB		*/ | 
 | 	default: | 
 | 		info->flash_id = FLASH_UNKNOWN; | 
 | 		saddr[0] = 0x00FF;		/* restore read mode */ | 
 | 		return (0);			/* => no or unknown flash */ | 
 |  | 
 | 	} | 
 |  | 
 | 	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) { | 
 | 		printf ("** ERROR: sector count %d > max (%d) **\n", | 
 | 			info->sector_count, CONFIG_SYS_MAX_FLASH_SECT); | 
 | 		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT; | 
 | 	} | 
 |  | 
 | 	saddr[0] = 0x00FF;		/* restore read mode */ | 
 |  | 
 | 	return (info->size); | 
 | } | 
 |  | 
 |  | 
 | /*----------------------------------------------------------------------- | 
 |  */ | 
 |  | 
 | int	flash_erase (flash_info_t *info, int s_first, int s_last) | 
 | { | 
 | 	int flag, prot, sect; | 
 | 	ulong start, now, last; | 
 |  | 
 | 	if ((s_first < 0) || (s_first > s_last)) { | 
 | 		if (info->flash_id == FLASH_UNKNOWN) { | 
 | 			printf ("- missing\n"); | 
 | 		} else { | 
 | 			printf ("- no sectors to erase\n"); | 
 | 		} | 
 | 		return 1; | 
 | 	} | 
 |  | 
 | 	if ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_MT) { | 
 | 		printf ("Can erase only MT flash types - aborted\n"); | 
 | 		return 1; | 
 | 	} | 
 |  | 
 | 	prot = 0; | 
 | 	for (sect=s_first; sect<=s_last; ++sect) { | 
 | 		if (info->protect[sect]) { | 
 | 			prot++; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (prot) { | 
 | 		printf ("- Warning: %d protected sectors will not be erased!\n", | 
 | 			prot); | 
 | 	} else { | 
 | 		printf ("\n"); | 
 | 	} | 
 |  | 
 | 	start = get_timer (0); | 
 | 	last  = start; | 
 | 	/* Start erase on unprotected sectors */ | 
 | 	for (sect = s_first; sect<=s_last; sect++) { | 
 | 		if (info->protect[sect] == 0) {	/* not protected */ | 
 | 			vu_short *addr = (vu_short *)(info->start[sect]); | 
 | 			unsigned short status; | 
 |  | 
 | 			/* Disable interrupts which might cause a timeout here */ | 
 | 			flag = disable_interrupts(); | 
 |  | 
 | 			*addr = 0x0050;	/* clear status register */ | 
 | 			*addr = 0x0020;	/* erase setup */ | 
 | 			*addr = 0x00D0;	/* erase confirm */ | 
 |  | 
 | 			/* re-enable interrupts if necessary */ | 
 | 			if (flag) | 
 | 				enable_interrupts(); | 
 |  | 
 | 			/* wait at least 80us - let's wait 1 ms */ | 
 | 			udelay (1000); | 
 |  | 
 | 			while (((status = *addr) & 0x0080) != 0x0080) { | 
 | 				if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { | 
 | 					printf ("Timeout\n"); | 
 | 					*addr = 0x00FF;	/* reset to read mode */ | 
 | 					return 1; | 
 | 				} | 
 |  | 
 | 				/* show that we're waiting */ | 
 | 				if ((now - last) > 1000) {	/* every second */ | 
 | 					putc ('.'); | 
 | 					last = now; | 
 | 				} | 
 | 			} | 
 |  | 
 | 			*addr = 0x00FF;	/* reset to read mode */ | 
 | 		} | 
 | 	} | 
 | 	printf (" done\n"); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /*----------------------------------------------------------------------- | 
 |  * Copy memory to flash, returns: | 
 |  * 0 - OK | 
 |  * 1 - write timeout | 
 |  * 2 - Flash not erased | 
 |  * 4 - Flash not identified | 
 |  */ | 
 |  | 
 | #define	FLASH_WIDTH	2	/* flash bus width in bytes */ | 
 |  | 
 | int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) | 
 | { | 
 | 	ulong cp, wp, data; | 
 | 	int i, l, rc; | 
 |  | 
 | 	if (info->flash_id == FLASH_UNKNOWN) { | 
 | 		return 4; | 
 | 	} | 
 |  | 
 | 	wp = (addr & ~(FLASH_WIDTH-1));	/* get lower FLASH_WIDTH aligned address */ | 
 |  | 
 | 	/* | 
 | 	 * handle unaligned start bytes | 
 | 	 */ | 
 | 	if ((l = addr - wp) != 0) { | 
 | 		data = 0; | 
 | 		for (i=0, cp=wp; i<l; ++i, ++cp) { | 
 | 			data = (data << 8) | (*(uchar *)cp); | 
 | 		} | 
 | 		for (; i<FLASH_WIDTH && cnt>0; ++i) { | 
 | 			data = (data << 8) | *src++; | 
 | 			--cnt; | 
 | 			++cp; | 
 | 		} | 
 | 		for (; cnt==0 && i<FLASH_WIDTH; ++i, ++cp) { | 
 | 			data = (data << 8) | (*(uchar *)cp); | 
 | 		} | 
 |  | 
 | 		if ((rc = write_data(info, wp, data)) != 0) { | 
 | 			return (rc); | 
 | 		} | 
 | 		wp += FLASH_WIDTH; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * handle FLASH_WIDTH aligned part | 
 | 	 */ | 
 | 	while (cnt >= FLASH_WIDTH) { | 
 | 		data = 0; | 
 | 		for (i=0; i<FLASH_WIDTH; ++i) { | 
 | 			data = (data << 8) | *src++; | 
 | 		} | 
 | 		if ((rc = write_data(info, wp, data)) != 0) { | 
 | 			return (rc); | 
 | 		} | 
 | 		wp  += FLASH_WIDTH; | 
 | 		cnt -= FLASH_WIDTH; | 
 | 	} | 
 |  | 
 | 	if (cnt == 0) { | 
 | 		return (0); | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * handle unaligned tail bytes | 
 | 	 */ | 
 | 	data = 0; | 
 | 	for (i=0, cp=wp; i<FLASH_WIDTH && cnt>0; ++i, ++cp) { | 
 | 		data = (data << 8) | *src++; | 
 | 		--cnt; | 
 | 	} | 
 | 	for (; i<FLASH_WIDTH; ++i, ++cp) { | 
 | 		data = (data << 8) | (*(uchar *)cp); | 
 | 	} | 
 |  | 
 | 	return (write_data(info, wp, data)); | 
 | } | 
 |  | 
 | /*----------------------------------------------------------------------- | 
 |  * Write a word to Flash, returns: | 
 |  * 0 - OK | 
 |  * 1 - write timeout | 
 |  * 2 - Flash not erased | 
 |  */ | 
 | static int write_data (flash_info_t *info, ulong dest, ulong data) | 
 | { | 
 | 	vu_short *addr = (vu_short *)dest; | 
 | 	ushort sdata = (ushort)data; | 
 | 	ushort status; | 
 | 	ulong start; | 
 | 	int flag; | 
 |  | 
 | 	/* Check if Flash is (sufficiently) erased */ | 
 | 	if ((*addr & sdata) != sdata) { | 
 | 		return (2); | 
 | 	} | 
 | 	/* Disable interrupts which might cause a timeout here */ | 
 | 	flag = disable_interrupts(); | 
 |  | 
 | 	*addr = 0x0040;		/* write setup */ | 
 | 	*addr = sdata; | 
 |  | 
 | 	/* re-enable interrupts if necessary */ | 
 | 	if (flag) | 
 | 		enable_interrupts(); | 
 |  | 
 | 	start = get_timer (0); | 
 |  | 
 | 	while (((status = *addr) & 0x0080) != 0x0080) { | 
 | 		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { | 
 | 			*addr = 0x00FF;	/* restore read mode */ | 
 | 			return (1); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	*addr = 0x00FF;		/* restore read mode */ | 
 |  | 
 | 	return (0); | 
 | } | 
 |  | 
 | /*----------------------------------------------------------------------- | 
 |  */ |