|  | /* | 
|  | * (C) Copyright 2009 | 
|  | * Stefano Babic, DENX Software Engineering, sbabic@denx.de. | 
|  | * | 
|  | * (C) Copyright 2008 | 
|  | * Marvell Semiconductor <www.marvell.com> | 
|  | * Written-by: Prafulla Wadaskar <prafulla@marvell.com> | 
|  | * | 
|  | * See file CREDITS for list of people who contributed to this | 
|  | * project. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License as | 
|  | * published by the Free Software Foundation; either version 2 of | 
|  | * the License, or (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | 
|  | * MA 02111-1307 USA | 
|  | */ | 
|  |  | 
|  | /* Required to obtain the getline prototype from stdio.h */ | 
|  | #define _GNU_SOURCE | 
|  |  | 
|  | #include "mkimage.h" | 
|  | #include <image.h> | 
|  | #include "imximage.h" | 
|  |  | 
|  | /* | 
|  | * Supported commands for configuration file | 
|  | */ | 
|  | static table_entry_t imximage_cmds[] = { | 
|  | {CMD_BOOT_FROM,		"BOOT_FROM",		"boot comand",	}, | 
|  | {CMD_DATA,		"DATA",			"Reg Write Data", }, | 
|  | {-1,		"",			"",	}, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Supported Boot options for configuration file | 
|  | * this is needed to set the correct flash offset | 
|  | */ | 
|  | static table_entry_t imximage_bootops[] = { | 
|  | {FLASH_OFFSET_SPI,	"spi",		"SPI Flash",	}, | 
|  | {FLASH_OFFSET_NAND,	"nand",		"NAND Flash",	}, | 
|  | {FLASH_OFFSET_SD,	"sd",		"SD Card",	}, | 
|  | {FLASH_OFFSET_ONENAND,	"onenand",	"OneNAND Flash",}, | 
|  | {-1,			"",		"Invalid",	}, | 
|  | }; | 
|  |  | 
|  |  | 
|  | static struct imx_header imximage_header; | 
|  |  | 
|  | static uint32_t get_cfg_value(char *token, char *name,  int linenr) | 
|  | { | 
|  | char *endptr; | 
|  | uint32_t value; | 
|  |  | 
|  | errno = 0; | 
|  | value = strtoul(token, &endptr, 16); | 
|  | if (errno || (token == endptr)) { | 
|  | fprintf(stderr, "Error: %s[%d] - Invalid hex data(%s)\n", | 
|  | name,  linenr, token); | 
|  | exit(EXIT_FAILURE); | 
|  | } | 
|  | return value; | 
|  | } | 
|  |  | 
|  | static int imximage_check_image_types(uint8_t type) | 
|  | { | 
|  | if (type == IH_TYPE_IMXIMAGE) | 
|  | return EXIT_SUCCESS; | 
|  | else | 
|  | return EXIT_FAILURE; | 
|  | } | 
|  |  | 
|  | static int imximage_verify_header(unsigned char *ptr, int image_size, | 
|  | struct mkimage_params *params) | 
|  | { | 
|  |  | 
|  | struct imx_header *imx_hdr = (struct imx_header *) ptr; | 
|  | flash_header_t *hdr = &imx_hdr->fhdr; | 
|  |  | 
|  | /* Only a few checks can be done: search for magic numbers */ | 
|  | if (hdr->app_code_barker != APP_CODE_BARKER) | 
|  | return -FDT_ERR_BADSTRUCTURE; | 
|  |  | 
|  | if (imx_hdr->dcd_table.preamble.barker != DCD_BARKER) | 
|  | return -FDT_ERR_BADSTRUCTURE; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void imximage_print_header(const void *ptr) | 
|  | { | 
|  | struct imx_header *imx_hdr = (struct imx_header *) ptr; | 
|  | flash_header_t *hdr = &imx_hdr->fhdr; | 
|  | uint32_t size; | 
|  | flash_cfg_parms_t *ext_header; | 
|  |  | 
|  | size = imx_hdr->dcd_table.preamble.length; | 
|  | if (size > (MAX_HW_CFG_SIZE * sizeof(dcd_type_addr_data_t))) { | 
|  | fprintf(stderr, | 
|  | "Error: Image corrupt DCD size %d exceed maximum %d\n", | 
|  | size / sizeof(dcd_type_addr_data_t), MAX_HW_CFG_SIZE); | 
|  | exit(EXIT_FAILURE); | 
|  | } | 
|  |  | 
|  | ext_header = (flash_cfg_parms_t *) ((uint32_t)&imx_hdr->dcd_table + | 
|  | sizeof(dcd_preamble_t) + size); | 
|  |  | 
|  | printf("Image Type:   Freescale IMX Boot Image\n"); | 
|  | printf("Data Size:    "); | 
|  | genimg_print_size(ext_header->length); | 
|  | printf("Load Address: %08x\n", (unsigned int)hdr->app_dest_ptr); | 
|  | printf("Entry Point:  %08x\n", (unsigned int)hdr->app_code_jump_vector); | 
|  | } | 
|  |  | 
|  | static uint32_t imximage_parse_cfg_file(struct imx_header *imxhdr, char *name) | 
|  | { | 
|  | FILE *fd = NULL; | 
|  | char *line = NULL; | 
|  | char *token, *saveptr1, *saveptr2; | 
|  | int lineno = 0; | 
|  | int fld, value; | 
|  | uint32_t len; | 
|  | int dcd_len = 0; | 
|  | dcd_t *dcd = &imxhdr->dcd_table; | 
|  | int32_t cmd; | 
|  |  | 
|  | fd = fopen(name, "r"); | 
|  | if (fd == 0) { | 
|  | fprintf(stderr, "Error: %s - Can't open DCD file\n", name); | 
|  | exit(EXIT_FAILURE); | 
|  | } | 
|  |  | 
|  | /* Very simple parsing, line starting with # are comments | 
|  | * and are dropped | 
|  | */ | 
|  | while ((getline(&line, &len, fd)) > 0) { | 
|  | lineno++; | 
|  |  | 
|  | token = strtok_r(line, "\r\n", &saveptr1); | 
|  | if (token == NULL) | 
|  | continue; | 
|  |  | 
|  | /* Check inside the single line */ | 
|  | for (fld = CFG_COMMAND, cmd = CMD_INVALID, | 
|  | line = token; ; line = NULL, fld++) { | 
|  | token = strtok_r(line, " \t", &saveptr2); | 
|  | if (token == NULL) | 
|  | break; | 
|  |  | 
|  | /* Drop all text starting with '#' as comments */ | 
|  | if (token[0] == '#') | 
|  | break; | 
|  |  | 
|  | /* parse all fields in a single line */ | 
|  | switch (fld) { | 
|  | case CFG_COMMAND: | 
|  | cmd = get_table_entry_id(imximage_cmds, | 
|  | "imximage commands", token); | 
|  | if (cmd < 0) { | 
|  | fprintf(stderr, | 
|  | "Error: %s[%d] - " | 
|  | "Invalid command (%s)\n", | 
|  | name, lineno, token); | 
|  | exit(EXIT_FAILURE); | 
|  | } | 
|  | break; | 
|  | case CFG_REG_SIZE: | 
|  | switch (cmd) { | 
|  | case CMD_BOOT_FROM: | 
|  | /* Get flash header offset */ | 
|  | imxhdr->flash_offset = | 
|  | get_table_entry_id( | 
|  | imximage_bootops, | 
|  | "imximage boot option", | 
|  | token); | 
|  | if (imxhdr->flash_offset == -1) { | 
|  | fprintf(stderr, | 
|  | "Error: %s[%d] -" | 
|  | "Invalid boot device" | 
|  | "(%s)\n", | 
|  | name, lineno, token); | 
|  | exit(EXIT_FAILURE); | 
|  | } | 
|  | break; | 
|  | case CMD_DATA: | 
|  | value = get_cfg_value(token, | 
|  | name, lineno); | 
|  |  | 
|  | /* Byte, halfword, word */ | 
|  | if ((value != 1) && | 
|  | (value != 2) && (value != 4)) { | 
|  | fprintf(stderr, | 
|  | "Error: %s[%d] - " | 
|  | "Invalid register size " | 
|  | "(%d)\n", | 
|  | name, lineno, value); | 
|  | exit(EXIT_FAILURE); | 
|  | } | 
|  | dcd->addr_data[dcd_len].type = value; | 
|  | break; | 
|  | } | 
|  |  | 
|  | case CFG_REG_ADDRESS: | 
|  | if (cmd == CMD_DATA) | 
|  | dcd->addr_data[dcd_len].addr = | 
|  | get_cfg_value(token, | 
|  | name, lineno); | 
|  | break; | 
|  | case CFG_REG_VALUE: | 
|  | if (cmd == CMD_DATA) { | 
|  | dcd->addr_data[dcd_len].value = | 
|  | get_cfg_value(token, | 
|  | name, lineno); | 
|  | dcd_len++; | 
|  | } | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (dcd_len > MAX_HW_CFG_SIZE) { | 
|  | fprintf(stderr, | 
|  | "Error: %s[%d] -" | 
|  | "DCD table exceeds maximum size(%d)\n", | 
|  | name, lineno, MAX_HW_CFG_SIZE); | 
|  | } | 
|  | } | 
|  | dcd->preamble.barker = DCD_BARKER; | 
|  | dcd->preamble.length = dcd_len * sizeof(dcd_type_addr_data_t); | 
|  | fclose(fd); | 
|  |  | 
|  | return dcd->preamble.length; | 
|  | } | 
|  |  | 
|  | static void imximage_set_header(void *ptr, struct stat *sbuf, int ifd, | 
|  | struct mkimage_params *params) | 
|  | { | 
|  | struct imx_header *hdr = (struct imx_header *)ptr; | 
|  | flash_header_t *fhdr = &hdr->fhdr; | 
|  | int dcd_len; | 
|  | flash_cfg_parms_t *ext_header; | 
|  | uint32_t base_offset; | 
|  |  | 
|  | /* Set default offset */ | 
|  | hdr->flash_offset = FLASH_OFFSET_STANDARD; | 
|  |  | 
|  | /* Set magic number */ | 
|  | fhdr->app_code_barker = APP_CODE_BARKER; | 
|  |  | 
|  | /* Parse dcd configuration file */ | 
|  | dcd_len = imximage_parse_cfg_file(hdr, params->imagename); | 
|  |  | 
|  | fhdr->app_dest_ptr = params->addr; | 
|  | fhdr->app_dest_ptr = params->ep - hdr->flash_offset - | 
|  | sizeof(struct imx_header); | 
|  | fhdr->app_code_jump_vector = params->ep; | 
|  |  | 
|  | base_offset = fhdr->app_dest_ptr + hdr->flash_offset ; | 
|  | fhdr->dcd_ptr_ptr = (uint32_t) ((uint32_t)&fhdr->dcd_ptr - | 
|  | (uint32_t)&fhdr->app_code_jump_vector) + base_offset ; | 
|  |  | 
|  | fhdr->dcd_ptr = base_offset + | 
|  | ((uint32_t)&hdr->dcd_table - | 
|  | (uint32_t)&hdr->fhdr); | 
|  |  | 
|  | /* The external flash header must be at the end of the DCD table */ | 
|  | ext_header = (flash_cfg_parms_t *) ((uint32_t)&hdr->dcd_table + | 
|  | dcd_len + | 
|  | sizeof(dcd_preamble_t)); | 
|  | ext_header->length = sbuf->st_size + | 
|  | hdr->flash_offset + | 
|  | sizeof(struct imx_header); | 
|  |  | 
|  | /* Security feature are not supported */ | 
|  | fhdr->app_code_csf = 0; | 
|  | fhdr->super_root_key = NULL; | 
|  |  | 
|  | } | 
|  |  | 
|  | int imximage_check_params(struct mkimage_params *params) | 
|  | { | 
|  | if (!params) | 
|  | return CFG_INVALID; | 
|  | if (!strlen(params->imagename)) { | 
|  | fprintf(stderr, "Error: %s - Configuration file not specified, " | 
|  | "it is needed for imximage generation\n", | 
|  | params->cmdname); | 
|  | return CFG_INVALID; | 
|  | } | 
|  | /* | 
|  | * Check parameters: | 
|  | * XIP is not allowed and verify that incompatible | 
|  | * parameters are not sent at the same time | 
|  | * For example, if list is required a data image must not be provided | 
|  | */ | 
|  | return	(params->dflag && (params->fflag || params->lflag)) || | 
|  | (params->fflag && (params->dflag || params->lflag)) || | 
|  | (params->lflag && (params->dflag || params->fflag)) || | 
|  | (params->xflag) || !(strlen(params->imagename)); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * imximage parameters | 
|  | */ | 
|  | static struct image_type_params imximage_params = { | 
|  | .name		= "Freescale i.MX 51 Boot Image support", | 
|  | .header_size	= sizeof(struct imx_header), | 
|  | .hdr		= (void *)&imximage_header, | 
|  | .check_image_type = imximage_check_image_types, | 
|  | .verify_header	= imximage_verify_header, | 
|  | .print_header	= imximage_print_header, | 
|  | .set_header	= imximage_set_header, | 
|  | .check_params	= imximage_check_params, | 
|  | }; | 
|  |  | 
|  | void init_imx_image_type(void) | 
|  | { | 
|  | mkimage_register(&imximage_params); | 
|  | } |