| Written by Thomas.Lange@corelatus.com 010805 | |
| To make a system for gth that actually works ;-) | |
| the variable TBASE needs to be set to 0,1 or 2 | |
| depending on location where image is supposed to | |
| be started from. | |
| E.g. make TBASE=1 | |
| 0: Start from RAM, base 0 | |
| 1: Start from flash_base + 0x10070 | |
| 2: Start from flash_base + 0x30070 | |
| When using 1 or 2, the image is supposed to be launched | |
| from miniboot that boots the first U-Boot image found in | |
| flash. | |
| For miniboot code, description, see www.opensource.se |