| /* |
| * Cache-handling routined for MIPS CPUs |
| * |
| * Copyright (c) 2003 Wolfgang Denk <wd@denx.de> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <asm-offsets.h> |
| #include <config.h> |
| #include <asm/asm.h> |
| #include <asm/regdef.h> |
| #include <asm/mipsregs.h> |
| #include <asm/addrspace.h> |
| #include <asm/cacheops.h> |
| |
| #ifndef CONFIG_SYS_MIPS_CACHE_MODE |
| #define CONFIG_SYS_MIPS_CACHE_MODE CONF_CM_CACHABLE_NONCOHERENT |
| #endif |
| |
| #define RA t9 |
| |
| #define INDEX_BASE CKSEG0 |
| |
| .macro cache_op op addr |
| .set push |
| .set noreorder |
| .set mips3 |
| cache \op, 0(\addr) |
| .set pop |
| .endm |
| |
| .macro f_fill64 dst, offset, val |
| LONG_S \val, (\offset + 0 * LONGSIZE)(\dst) |
| LONG_S \val, (\offset + 1 * LONGSIZE)(\dst) |
| LONG_S \val, (\offset + 2 * LONGSIZE)(\dst) |
| LONG_S \val, (\offset + 3 * LONGSIZE)(\dst) |
| LONG_S \val, (\offset + 4 * LONGSIZE)(\dst) |
| LONG_S \val, (\offset + 5 * LONGSIZE)(\dst) |
| LONG_S \val, (\offset + 6 * LONGSIZE)(\dst) |
| LONG_S \val, (\offset + 7 * LONGSIZE)(\dst) |
| #if LONGSIZE == 4 |
| LONG_S \val, (\offset + 8 * LONGSIZE)(\dst) |
| LONG_S \val, (\offset + 9 * LONGSIZE)(\dst) |
| LONG_S \val, (\offset + 10 * LONGSIZE)(\dst) |
| LONG_S \val, (\offset + 11 * LONGSIZE)(\dst) |
| LONG_S \val, (\offset + 12 * LONGSIZE)(\dst) |
| LONG_S \val, (\offset + 13 * LONGSIZE)(\dst) |
| LONG_S \val, (\offset + 14 * LONGSIZE)(\dst) |
| LONG_S \val, (\offset + 15 * LONGSIZE)(\dst) |
| #endif |
| .endm |
| |
| /* |
| * mips_init_icache(uint PRId, ulong icache_size, unchar icache_linesz) |
| */ |
| LEAF(mips_init_icache) |
| blez a1, 9f |
| mtc0 zero, CP0_TAGLO |
| /* clear tag to invalidate */ |
| PTR_LI t0, INDEX_BASE |
| PTR_ADDU t1, t0, a1 |
| 1: cache_op INDEX_STORE_TAG_I t0 |
| PTR_ADDU t0, a2 |
| bne t0, t1, 1b |
| /* fill once, so data field parity is correct */ |
| PTR_LI t0, INDEX_BASE |
| 2: cache_op FILL t0 |
| PTR_ADDU t0, a2 |
| bne t0, t1, 2b |
| /* invalidate again - prudent but not strictly neccessary */ |
| PTR_LI t0, INDEX_BASE |
| 1: cache_op INDEX_STORE_TAG_I t0 |
| PTR_ADDU t0, a2 |
| bne t0, t1, 1b |
| 9: jr ra |
| END(mips_init_icache) |
| |
| /* |
| * mips_init_dcache(uint PRId, ulong dcache_size, unchar dcache_linesz) |
| */ |
| LEAF(mips_init_dcache) |
| blez a1, 9f |
| mtc0 zero, CP0_TAGLO |
| /* clear all tags */ |
| PTR_LI t0, INDEX_BASE |
| PTR_ADDU t1, t0, a1 |
| 1: cache_op INDEX_STORE_TAG_D t0 |
| PTR_ADDU t0, a2 |
| bne t0, t1, 1b |
| /* load from each line (in cached space) */ |
| PTR_LI t0, INDEX_BASE |
| 2: LONG_L zero, 0(t0) |
| PTR_ADDU t0, a2 |
| bne t0, t1, 2b |
| /* clear all tags */ |
| PTR_LI t0, INDEX_BASE |
| 1: cache_op INDEX_STORE_TAG_D t0 |
| PTR_ADDU t0, a2 |
| bne t0, t1, 1b |
| 9: jr ra |
| END(mips_init_dcache) |
| |
| /* |
| * mips_cache_reset - low level initialisation of the primary caches |
| * |
| * This routine initialises the primary caches to ensure that they have good |
| * parity. It must be called by the ROM before any cached locations are used |
| * to prevent the possibility of data with bad parity being written to memory. |
| * |
| * To initialise the instruction cache it is essential that a source of data |
| * with good parity is available. This routine will initialise an area of |
| * memory starting at location zero to be used as a source of parity. |
| * |
| * RETURNS: N/A |
| * |
| */ |
| NESTED(mips_cache_reset, 0, ra) |
| move RA, ra |
| |
| #if !defined(CONFIG_SYS_ICACHE_SIZE) || !defined(CONFIG_SYS_DCACHE_SIZE) || \ |
| !defined(CONFIG_SYS_CACHELINE_SIZE) |
| /* read Config1 for use below */ |
| mfc0 t5, CP0_CONFIG, 1 |
| #endif |
| |
| #ifdef CONFIG_SYS_CACHELINE_SIZE |
| li t7, CONFIG_SYS_CACHELINE_SIZE |
| li t8, CONFIG_SYS_CACHELINE_SIZE |
| #else |
| /* Detect I-cache line size. */ |
| srl t8, t5, MIPS_CONF1_IL_SHIFT |
| andi t8, t8, (MIPS_CONF1_IL >> MIPS_CONF1_IL_SHIFT) |
| beqz t8, 1f |
| li t6, 2 |
| sllv t8, t6, t8 |
| |
| 1: /* Detect D-cache line size. */ |
| srl t7, t5, MIPS_CONF1_DL_SHIFT |
| andi t7, t7, (MIPS_CONF1_DL >> MIPS_CONF1_DL_SHIFT) |
| beqz t7, 1f |
| li t6, 2 |
| sllv t7, t6, t7 |
| 1: |
| #endif |
| |
| #ifdef CONFIG_SYS_ICACHE_SIZE |
| li t2, CONFIG_SYS_ICACHE_SIZE |
| #else |
| /* Detect I-cache size. */ |
| srl t6, t5, MIPS_CONF1_IS_SHIFT |
| andi t6, t6, (MIPS_CONF1_IS >> MIPS_CONF1_IS_SHIFT) |
| li t4, 32 |
| xori t2, t6, 0x7 |
| beqz t2, 1f |
| addi t6, t6, 1 |
| sllv t4, t4, t6 |
| 1: /* At this point t4 == I-cache sets. */ |
| mul t2, t4, t8 |
| srl t6, t5, MIPS_CONF1_IA_SHIFT |
| andi t6, t6, (MIPS_CONF1_IA >> MIPS_CONF1_IA_SHIFT) |
| addi t6, t6, 1 |
| /* At this point t6 == I-cache ways. */ |
| mul t2, t2, t6 |
| #endif |
| |
| #ifdef CONFIG_SYS_DCACHE_SIZE |
| li t3, CONFIG_SYS_DCACHE_SIZE |
| #else |
| /* Detect D-cache size. */ |
| srl t6, t5, MIPS_CONF1_DS_SHIFT |
| andi t6, t6, (MIPS_CONF1_DS >> MIPS_CONF1_DS_SHIFT) |
| li t4, 32 |
| xori t3, t6, 0x7 |
| beqz t3, 1f |
| addi t6, t6, 1 |
| sllv t4, t4, t6 |
| 1: /* At this point t4 == I-cache sets. */ |
| mul t3, t4, t7 |
| srl t6, t5, MIPS_CONF1_DA_SHIFT |
| andi t6, t6, (MIPS_CONF1_DA >> MIPS_CONF1_DA_SHIFT) |
| addi t6, t6, 1 |
| /* At this point t6 == I-cache ways. */ |
| mul t3, t3, t6 |
| #endif |
| |
| /* Determine the largest L1 cache size */ |
| #if defined(CONFIG_SYS_ICACHE_SIZE) && defined(CONFIG_SYS_DCACHE_SIZE) |
| #if CONFIG_SYS_ICACHE_SIZE > CONFIG_SYS_DCACHE_SIZE |
| li v0, CONFIG_SYS_ICACHE_SIZE |
| #else |
| li v0, CONFIG_SYS_DCACHE_SIZE |
| #endif |
| #else |
| move v0, t2 |
| sltu t1, t2, t3 |
| movn v0, t3, t1 |
| #endif |
| /* |
| * Now clear that much memory starting from zero. |
| */ |
| PTR_LI a0, CKSEG1 |
| PTR_ADDU a1, a0, v0 |
| 2: PTR_ADDIU a0, 64 |
| f_fill64 a0, -64, zero |
| bne a0, a1, 2b |
| |
| /* |
| * The caches are probably in an indeterminate state, |
| * so we force good parity into them by doing an |
| * invalidate, load/fill, invalidate for each line. |
| */ |
| |
| /* |
| * Assume bottom of RAM will generate good parity for the cache. |
| */ |
| |
| /* |
| * Initialize the I-cache first, |
| */ |
| move a1, t2 |
| move a2, t8 |
| PTR_LA v1, mips_init_icache |
| jalr v1 |
| |
| /* |
| * then initialize D-cache. |
| */ |
| move a1, t3 |
| move a2, t7 |
| PTR_LA v1, mips_init_dcache |
| jalr v1 |
| |
| jr RA |
| END(mips_cache_reset) |
| |
| /* |
| * dcache_status - get cache status |
| * |
| * RETURNS: 0 - cache disabled; 1 - cache enabled |
| * |
| */ |
| LEAF(dcache_status) |
| mfc0 t0, CP0_CONFIG |
| li t1, CONF_CM_UNCACHED |
| andi t0, t0, CONF_CM_CMASK |
| move v0, zero |
| beq t0, t1, 2f |
| li v0, 1 |
| 2: jr ra |
| END(dcache_status) |
| |
| /* |
| * dcache_disable - disable cache |
| * |
| * RETURNS: N/A |
| * |
| */ |
| LEAF(dcache_disable) |
| mfc0 t0, CP0_CONFIG |
| li t1, -8 |
| and t0, t0, t1 |
| ori t0, t0, CONF_CM_UNCACHED |
| mtc0 t0, CP0_CONFIG |
| jr ra |
| END(dcache_disable) |
| |
| /* |
| * dcache_enable - enable cache |
| * |
| * RETURNS: N/A |
| * |
| */ |
| LEAF(dcache_enable) |
| mfc0 t0, CP0_CONFIG |
| ori t0, CONF_CM_CMASK |
| xori t0, CONF_CM_CMASK |
| ori t0, CONFIG_SYS_MIPS_CACHE_MODE |
| mtc0 t0, CP0_CONFIG |
| jr ra |
| END(dcache_enable) |