| /* | |
| * (C) Copyright 2007 | |
| * Michael Schwingen, michael@schwingen.org | |
| * | |
| * hardware register definitions for the AcTux-2 board. | |
| * | |
| * See file CREDITS for list of people who contributed to this | |
| * project. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation; either version 2 of | |
| * the License, or (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
| * MA 02111-1307 USA | |
| */ | |
| #ifndef _ACTUX2_HW_H | |
| #define _ACTUX2_HW_H | |
| /* 0 = LED off,1 = green, 2 = red, 3 = orange */ | |
| #define ACTUX2_LED1(a) writeb((a ? 2 : 0), IXP425_EXP_BUS_CS7_BASE_PHYS + 0) | |
| #define ACTUX2_LED2(a) writeb((a ? 2 : 0), IXP425_EXP_BUS_CS7_BASE_PHYS + 1) | |
| #define ACTUX2_LED3(a) writeb((a ? 0 : 2), IXP425_EXP_BUS_CS7_BASE_PHYS + 2) | |
| #define ACTUX2_LED4(a) writeb((a ? 0 : 2), IXP425_EXP_BUS_CS7_BASE_PHYS + 3) | |
| #define ACTUX2_DBG_PORT IXP425_EXP_BUS_CS5_BASE_PHYS | |
| #define ACTUX2_BOARDREL (readb(IXP425_EXP_BUS_CS6_BASE_PHYS) & 0x0F) | |
| #define ACTUX2_OPTION (readb(IXP425_EXP_BUS_CS6_BASE_PHYS) & 0xF0) | |
| /* | |
| * GPIO settings | |
| */ | |
| #define CONFIG_SYS_GPIO_DBGINT 0 | |
| #define CONFIG_SYS_GPIO_ETHINT 1 | |
| #define CONFIG_SYS_GPIO_ETHRST 2 /* Out */ | |
| #define CONFIG_SYS_GPIO_LED5_GN 3 /* Out */ | |
| #define CONFIG_SYS_GPIO_UNUSED4 4 | |
| #define CONFIG_SYS_GPIO_UNUSED5 5 | |
| #define CONFIG_SYS_GPIO_DSR 6 /* Out */ | |
| #define CONFIG_SYS_GPIO_DCD 7 /* Out */ | |
| #define CONFIG_SYS_GPIO_IPAC_INT 8 | |
| #define CONFIG_SYS_GPIO_DBGJUMPER 9 | |
| #define CONFIG_SYS_GPIO_BUTTON1 10 | |
| #define CONFIG_SYS_GPIO_DBGSENSE 11 | |
| #define CONFIG_SYS_GPIO_DTR 12 | |
| #define CONFIG_SYS_GPIO_IORST 13 /* Out */ | |
| #define CONFIG_SYS_GPIO_PCI_CLK 14 /* Out */ | |
| #define CONFIG_SYS_GPIO_EXTBUS_CLK 15 /* Out */ | |
| #endif |