| /* | |
| * (C) Copyright 2005 | |
| * Heiko Schocher, DENX Software Engineering, <hs@denx.de> | |
| * | |
| * See file CREDITS for list of people who contributed to this | |
| * project. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation; either version 2 of | |
| * the License, or (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
| * MA 02111-1307 USA | |
| */ | |
| #include <common.h> | |
| #include <ioports.h> | |
| #include <mpc8260.h> | |
| #if defined(CONFIG_OF_LIBFDT) | |
| #include <libfdt.h> | |
| #include <libfdt_env.h> | |
| #include <fdt_support.h> | |
| #endif | |
| DECLARE_GLOBAL_DATA_PTR; | |
| /* | |
| * I/O Port configuration table | |
| * | |
| * if conf is 1, then that port pin will be configured at boot time | |
| * according to the five values podr/pdir/ppar/psor/pdat for that entry | |
| */ | |
| const iop_conf_t iop_conf_tab[4][32] = { | |
| /* Port A configuration */ | |
| { /* conf ppar psor pdir podr pdat */ | |
| /* PA31 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 COL */ | |
| /* PA30 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 CRS */ | |
| /* PA29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 TXER */ | |
| /* PA28 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 TXEN */ | |
| /* PA27 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 RXDV */ | |
| /* PA26 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 RXER */ | |
| /* PA25 */ { 0, 0, 0, 0, 1, 0 }, /* 8247_P0 */ | |
| #if defined(CONFIG_SOFT_I2C) | |
| /* PA24 */ { 1, 0, 0, 0, 1, 1 }, /* I2C_SDA2 */ | |
| /* PA23 */ { 1, 0, 0, 1, 1, 1 }, /* I2C_SCL2 */ | |
| #else /* normal I/O port pins */ | |
| /* PA24 */ { 0, 0, 0, 1, 0, 0 }, /* PA24 */ | |
| /* PA23 */ { 0, 0, 0, 1, 0, 0 }, /* PA23 */ | |
| #endif | |
| /* PA22 */ { 0, 0, 0, 0, 1, 0 }, /* SMC2_DCD */ | |
| /* PA21 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD3 */ | |
| /* PA20 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD2 */ | |
| /* PA19 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD1 */ | |
| /* PA18 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD0 */ | |
| /* PA17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD0 */ | |
| /* PA16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD1 */ | |
| /* PA15 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD2 */ | |
| /* PA14 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD3 */ | |
| /* PA13 */ { 0, 0, 0, 1, 1, 0 }, /* SMC2_RTS */ | |
| /* PA12 */ { 0, 0, 0, 0, 1, 0 }, /* SMC2_CTS */ | |
| /* PA11 */ { 0, 0, 0, 1, 1, 0 }, /* SMC2_DTR */ | |
| /* PA10 */ { 0, 0, 0, 0, 1, 0 }, /* SMC2_DSR */ | |
| /* PA9 */ { 0, 1, 0, 1, 0, 0 }, /* SMC2 TXD */ | |
| /* PA8 */ { 0, 1, 0, 0, 0, 0 }, /* SMC2 RXD */ | |
| /* PA7 */ { 0, 0, 0, 1, 0, 0 }, /* PA7 */ | |
| /* PA6 */ { 0, 0, 0, 1, 0, 0 }, /* PA6 */ | |
| /* PA5 */ { 0, 0, 0, 1, 0, 0 }, /* PA5 */ | |
| /* PA4 */ { 0, 0, 0, 1, 0, 0 }, /* PA4 */ | |
| /* PA3 */ { 0, 0, 0, 1, 0, 0 }, /* PA3 */ | |
| /* PA2 */ { 0, 0, 0, 1, 0, 0 }, /* PA2 */ | |
| /* PA1 */ { 0, 0, 0, 1, 0, 0 }, /* PA1 */ | |
| /* PA0 */ { 0, 0, 0, 1, 0, 0 } /* PA0 */ | |
| }, | |
| /* Port B configuration */ | |
| { /* conf ppar psor pdir podr pdat */ | |
| /* PB31 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */ | |
| /* PB30 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */ | |
| /* PB29 */ { 0, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */ | |
| /* PB28 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */ | |
| /* PB27 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */ | |
| /* PB26 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */ | |
| /* PB25 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */ | |
| /* PB24 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */ | |
| /* PB23 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */ | |
| /* PB22 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */ | |
| /* PB21 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */ | |
| /* PB20 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */ | |
| /* PB19 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */ | |
| /* PB18 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */ | |
| /* PB17 */ { 0, 0, 0, 0, 0, 0 }, /* PB17 */ | |
| /* PB16 */ { 0, 0, 0, 0, 0, 0 }, /* PB16 */ | |
| /* PB15 */ { 0, 0, 0, 0, 0, 0 }, /* PB15 */ | |
| /* PB14 */ { 0, 0, 0, 0, 0, 0 }, /* PB14 */ | |
| /* PB13 */ { 0, 0, 0, 0, 0, 0 }, /* PB13 */ | |
| /* PB12 */ { 0, 0, 0, 0, 0, 0 }, /* PB12 */ | |
| /* PB11 */ { 0, 0, 0, 0, 0, 0 }, /* PB11 */ | |
| /* PB10 */ { 0, 0, 0, 0, 0, 0 }, /* PB10 */ | |
| /* PB9 */ { 0, 0, 0, 0, 0, 0 }, /* PB9 */ | |
| /* PB8 */ { 0, 0, 0, 0, 0, 0 }, /* PB8 */ | |
| /* PB7 */ { 0, 0, 0, 0, 0, 0 }, /* PB7 */ | |
| /* PB6 */ { 0, 0, 0, 0, 0, 0 }, /* PB6 */ | |
| /* PB5 */ { 0, 0, 0, 0, 0, 0 }, /* PB5 */ | |
| /* PB4 */ { 0, 0, 0, 0, 0, 0 }, /* PB4 */ | |
| /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ | |
| /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ | |
| /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ | |
| /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ | |
| }, | |
| /* Port C */ | |
| { /* conf ppar psor pdir podr pdat */ | |
| /* PC31 */ { 0, 0, 0, 1, 0, 0 }, /* PC31 */ | |
| /* PC30 */ { 0, 0, 0, 1, 0, 0 }, /* PC30 */ | |
| /* PC29 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN *CLSN */ | |
| /* PC28 */ { 0, 1, 1, 0, 0, 0 }, /* SYNC_OUT */ | |
| /* PC27 */ { 0, 0, 0, 1, 0, 0 }, /* PC27 */ | |
| /* PC26 */ { 0, 0, 0, 1, 0, 0 }, /* PC26 */ | |
| /* PC25 */ { 0, 1, 1, 0, 0, 0 }, /* SYNC_IN */ | |
| /* PC24 */ { 0, 0, 0, 1, 0, 0 }, /* PC24 */ | |
| /* PC23 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII TX_CLK */ | |
| /* PC22 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RX_CLK */ | |
| /* PC21 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RXCLK */ | |
| /* PC20 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN TXCLK */ | |
| /* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_CLK */ | |
| /* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII TX_CLK */ | |
| /* PC17 */ { 0, 0, 0, 1, 0, 0 }, /* PC17 */ | |
| /* PC16 */ { 0, 0, 0, 1, 0, 0 }, /* PC16 */ | |
| /* PC15 */ { 0, 0, 0, 1, 0, 0 }, /* PC15 */ | |
| /* PC14 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN *CD */ | |
| /* PC13 */ { 0, 0, 0, 1, 0, 0 }, /* PC13 */ | |
| /* PC12 */ { 0, 0, 0, 1, 0, 0 }, /* PC12 */ | |
| /* PC11 */ { 0, 0, 0, 1, 0, 0 }, /* PC11 */ | |
| /* PC10 */ { 0, 0, 0, 1, 0, 0 }, /* FCC2 MDC */ | |
| /* PC9 */ { 0, 0, 0, 1, 0, 0 }, /* FCC2 MDIO */ | |
| /* PC8 */ { 0, 0, 0, 1, 0, 0 }, /* PC8 */ | |
| /* PC7 */ { 0, 0, 0, 1, 0, 0 }, /* PC7 */ | |
| /* PC6 */ { 0, 0, 0, 1, 0, 0 }, /* PC6 */ | |
| /* PC5 */ { 0, 0, 0, 1, 0, 0 }, /* PC5 */ | |
| /* PC4 */ { 0, 0, 0, 1, 0, 0 }, /* PC4 */ | |
| /* PC3 */ { 0, 0, 0, 1, 0, 0 }, /* PC3 */ | |
| /* PC2 */ { 0, 0, 0, 1, 0, 1 }, /* ENET FDE */ | |
| /* PC1 */ { 0, 0, 0, 1, 0, 0 }, /* ENET DSQE */ | |
| /* PC0 */ { 0, 0, 0, 1, 0, 0 }, /* ENET LBK */ | |
| }, | |
| /* Port D */ | |
| { /* conf ppar psor pdir podr pdat */ | |
| /* PD31 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RxD */ | |
| /* PD30 */ { 0, 1, 1, 1, 0, 0 }, /* SCC1 EN TxD */ | |
| /* PD29 */ { 0, 1, 0, 1, 0, 0 }, /* SCC1 EN TENA */ | |
| /* PD28 */ { 0, 0, 0, 1, 0, 0 }, /* PD28 */ | |
| /* PD27 */ { 0, 0, 0, 1, 0, 0 }, /* PD27 */ | |
| /* PD26 */ { 0, 0, 0, 1, 0, 0 }, /* PD26 */ | |
| /* PD25 */ { 0, 1, 0, 0, 0, 0 }, /* SCC3_RX */ | |
| /* PD24 */ { 0, 1, 0, 1, 0, 0 }, /* SCC3_TX */ | |
| /* PD23 */ { 0, 1, 0, 1, 0, 0 }, /* SCC3_RTS */ | |
| /* PD22 */ { 0, 1, 0, 0, 0, 0 }, /* SCC4_RXD */ | |
| /* PD21 */ { 0, 1, 0, 1, 0, 0 }, /* SCC4_TXD */ | |
| /* PD20 */ { 0, 1, 0, 1, 0, 0 }, /* SCC4_RTS */ | |
| /* PD19 */ { 0, 1, 1, 0, 0, 0 }, /* SPI_SEL */ | |
| /* PD18 */ { 0, 1, 1, 0, 0, 0 }, /* SPI_CLK */ | |
| /* PD17 */ { 0, 1, 1, 0, 0, 0 }, /* SPI_MOSI */ | |
| /* PD16 */ { 0, 1, 1, 0, 0, 0 }, /* SPI_MISO */ | |
| #if defined(CONFIG_HARD_I2C) | |
| /* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA1 */ | |
| /* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL1 */ | |
| #else /* normal I/O port pins */ | |
| /* PD15 */ { 0, 1, 1, 0, 1, 0 }, /* PD15 */ | |
| /* PD14 */ { 0, 1, 1, 0, 1, 0 }, /* PD14 */ | |
| #endif | |
| /* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */ | |
| /* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */ | |
| /* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */ | |
| /* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */ | |
| /* PD9 */ { 0, 0, 0, 0, 0, 0 }, /* PD9 */ | |
| /* PD8 */ { 0, 0, 0, 0, 0, 0 }, /* PD8 */ | |
| /* PD7 */ { 1, 0, 0, 1, 0, 1 }, /* MII_MDIO */ | |
| /* PD6 */ { 0, 0, 0, 1, 0, 1 }, /* PD6 */ | |
| /* PD5 */ { 0, 0, 0, 1, 0, 1 }, /* PD5 */ | |
| /* PD4 */ { 0, 0, 0, 1, 0, 1 }, /* PD4 */ | |
| /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ | |
| /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ | |
| /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ | |
| /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ | |
| } | |
| }; | |
| /* ------------------------------------------------------------------------- */ | |
| /* Check Board Identity: | |
| */ | |
| int checkboard (void) | |
| { | |
| puts ("Board: IDS 8247\n"); | |
| return 0; | |
| } | |
| /* ------------------------------------------------------------------------- */ | |
| /* Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx | |
| * | |
| * This routine performs standard 8260 initialization sequence | |
| * and calculates the available memory size. It may be called | |
| * several times to try different SDRAM configurations on both | |
| * 60x and local buses. | |
| */ | |
| static long int try_init (volatile memctl8260_t * memctl, ulong sdmr, | |
| ulong orx, volatile uchar * base) | |
| { | |
| volatile uchar c = 0xff; | |
| volatile uint *sdmr_ptr; | |
| volatile uint *orx_ptr; | |
| ulong maxsize, size; | |
| int i; | |
| /* We must be able to test a location outsize the maximum legal size | |
| * to find out THAT we are outside; but this address still has to be | |
| * mapped by the controller. That means, that the initial mapping has | |
| * to be (at least) twice as large as the maximum expected size. | |
| */ | |
| maxsize = (1 + (~orx | 0x7fff))/* / 2*/; | |
| sdmr_ptr = &memctl->memc_psdmr; | |
| orx_ptr = &memctl->memc_or2; | |
| *orx_ptr = orx; | |
| /* | |
| * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35): | |
| * | |
| * "At system reset, initialization software must set up the | |
| * programmable parameters in the memory controller banks registers | |
| * (ORx, BRx, P/LSDMR). After all memory parameters are configured, | |
| * system software should execute the following initialization sequence | |
| * for each SDRAM device. | |
| * | |
| * 1. Issue a PRECHARGE-ALL-BANKS command | |
| * 2. Issue eight CBR REFRESH commands | |
| * 3. Issue a MODE-SET command to initialize the mode register | |
| * | |
| * The initial commands are executed by setting P/LSDMR[OP] and | |
| * accessing the SDRAM with a single-byte transaction." | |
| * | |
| * The appropriate BRx/ORx registers have already been set when we | |
| * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE. | |
| */ | |
| *sdmr_ptr = sdmr | PSDMR_OP_PREA; | |
| *base = c; | |
| *sdmr_ptr = sdmr | PSDMR_OP_CBRR; | |
| for (i = 0; i < 8; i++) | |
| *base = c; | |
| *sdmr_ptr = sdmr | PSDMR_OP_MRW; | |
| *(base + CONFIG_SYS_MRS_OFFS) = c; /* setting MR on address lines */ | |
| *sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN; | |
| *base = c; | |
| size = get_ram_size((long *)base, maxsize); | |
| *orx_ptr = orx | ~(size - 1); | |
| return (size); | |
| } | |
| phys_size_t initdram (int board_type) | |
| { | |
| volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; | |
| volatile memctl8260_t *memctl = &immap->im_memctl; | |
| long psize, lsize; | |
| psize = 16 * 1024 * 1024; | |
| lsize = 0; | |
| memctl->memc_psrt = CONFIG_SYS_PSRT; | |
| memctl->memc_mptpr = CONFIG_SYS_MPTPR; | |
| #ifndef CONFIG_SYS_RAMBOOT | |
| /* 60x SDRAM setup: | |
| */ | |
| psize = try_init (memctl, CONFIG_SYS_PSDMR, CONFIG_SYS_OR2, | |
| (uchar *) CONFIG_SYS_SDRAM_BASE); | |
| #endif /* CONFIG_SYS_RAMBOOT */ | |
| icache_enable (); | |
| return (psize); | |
| } | |
| int misc_init_r (void) | |
| { | |
| gd->bd->bi_flashstart = 0xff800000; | |
| return 0; | |
| } | |
| #if defined(CONFIG_CMD_NAND) | |
| #include <nand.h> | |
| #include <linux/mtd/mtd.h> | |
| #include <asm/io.h> | |
| static u8 hwctl; | |
| static void ids_nand_hwctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) | |
| { | |
| struct nand_chip *this = mtd->priv; | |
| if (ctrl & NAND_CTRL_CHANGE) { | |
| if ( ctrl & NAND_CLE ) { | |
| hwctl |= 0x1; | |
| writeb(0x00, (this->IO_ADDR_W + 0x0a)); | |
| } else { | |
| hwctl &= ~0x1; | |
| writeb(0x00, (this->IO_ADDR_W + 0x08)); | |
| } | |
| if ( ctrl & NAND_ALE ) { | |
| hwctl |= 0x2; | |
| writeb(0x00, (this->IO_ADDR_W + 0x09)); | |
| } else { | |
| hwctl &= ~0x2; | |
| writeb(0x00, (this->IO_ADDR_W + 0x08)); | |
| } | |
| if ( (ctrl & NAND_NCE) != NAND_NCE) | |
| writeb(0x00, (this->IO_ADDR_W + 0x0c)); | |
| else | |
| writeb(0x00, (this->IO_ADDR_W + 0x08)); | |
| } | |
| if (cmd != NAND_CMD_NONE) | |
| writeb(cmd, this->IO_ADDR_W); | |
| } | |
| static u_char ids_nand_read_byte(struct mtd_info *mtd) | |
| { | |
| struct nand_chip *this = mtd->priv; | |
| return readb(this->IO_ADDR_R); | |
| } | |
| static void ids_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len) | |
| { | |
| struct nand_chip *nand = mtd->priv; | |
| int i; | |
| for (i = 0; i < len; i++) { | |
| if (hwctl & 0x1) | |
| writeb(buf[i], (nand->IO_ADDR_W + 0x02)); | |
| else if (hwctl & 0x2) | |
| writeb(buf[i], (nand->IO_ADDR_W + 0x01)); | |
| else | |
| writeb(buf[i], nand->IO_ADDR_W); | |
| } | |
| } | |
| static void ids_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) | |
| { | |
| struct nand_chip *this = mtd->priv; | |
| int i; | |
| for (i = 0; i < len; i++) { | |
| buf[i] = readb(this->IO_ADDR_R); | |
| } | |
| } | |
| static int ids_nand_dev_ready(struct mtd_info *mtd) | |
| { | |
| /* constant delay (see also tR in the datasheet) */ | |
| udelay(12); | |
| return 1; | |
| } | |
| int board_nand_init(struct nand_chip *nand) | |
| { | |
| nand->ecc.mode = NAND_ECC_SOFT; | |
| /* Reference hardware control function */ | |
| nand->cmd_ctrl = ids_nand_hwctrl; | |
| nand->read_byte = ids_nand_read_byte; | |
| nand->write_buf = ids_nand_write_buf; | |
| nand->read_buf = ids_nand_read_buf; | |
| nand->dev_ready = ids_nand_dev_ready; | |
| nand->chip_delay = 12; | |
| return 0; | |
| } | |
| #endif /* CONFIG_CMD_NAND */ | |
| #if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) | |
| void ft_board_setup(void *blob, bd_t *bd) | |
| { | |
| ft_cpu_setup( blob, bd); | |
| } | |
| #endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */ |