| /* | |
| * (C) Copyright 2009 | |
| * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com. | |
| * | |
| * See file CREDITS for list of people who contributed to this | |
| * project. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation; either version 2 of | |
| * the License, or (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
| * MA 02111-1307 USA | |
| */ | |
| #include <common.h> | |
| #include <command.h> | |
| #include <i2c.h> | |
| #include <net.h> | |
| #include <asm/io.h> | |
| #include <asm/arch/hardware.h> | |
| #include <asm/arch/spr_emi.h> | |
| #include <asm/arch/spr_xloader_table.h> | |
| #include <asm/arch/spr_defs.h> | |
| #define CPU 0 | |
| #define DDR 1 | |
| #define SRAM_REL 0xD2801000 | |
| DECLARE_GLOBAL_DATA_PTR; | |
| static struct chip_data chip_data; | |
| int dram_init(void) | |
| { | |
| struct xloader_table *xloader_tb = | |
| (struct xloader_table *)XLOADER_TABLE_ADDRESS; | |
| struct xloader_table_1_1 *table_1_1; | |
| struct xloader_table_1_2 *table_1_2; | |
| struct chip_data *chip = &chip_data; | |
| gd->bd->bi_dram[0].start = PHYS_SDRAM_1; | |
| gd->bd->bi_dram[0].size = get_ram_size(PHYS_SDRAM_1, | |
| PHYS_SDRAM_1_MAXSIZE); | |
| if (XLOADER_TABLE_VERSION_1_1 == xloader_tb->table_version) { | |
| table_1_1 = &xloader_tb->table.table_1_1; | |
| chip->dramfreq = table_1_1->ddrfreq; | |
| chip->dramtype = table_1_1->ddrtype; | |
| } else if (XLOADER_TABLE_VERSION_1_2 == xloader_tb->table_version) { | |
| table_1_2 = &xloader_tb->table.table_1_2; | |
| chip->dramfreq = table_1_2->ddrfreq; | |
| chip->dramtype = table_1_2->ddrtype; | |
| } else { | |
| chip->dramfreq = -1; | |
| } | |
| return 0; | |
| } | |
| int misc_init_r(void) | |
| { | |
| #if defined(CONFIG_CMD_NET) | |
| uchar mac_id[6]; | |
| if (!eth_getenv_enetaddr("ethaddr", mac_id) && !i2c_read_mac(mac_id)) | |
| eth_setenv_enetaddr("ethaddr", mac_id); | |
| #endif | |
| setenv("verify", "n"); | |
| #if defined(CONFIG_SPEAR_USBTTY) | |
| setenv("stdin", "usbtty"); | |
| setenv("stdout", "usbtty"); | |
| setenv("stderr", "usbtty"); | |
| #endif | |
| return 0; | |
| } | |
| #ifdef CONFIG_SPEAR_EMI | |
| struct cust_emi_para { | |
| unsigned int tap; | |
| unsigned int tsdp; | |
| unsigned int tdpw; | |
| unsigned int tdpr; | |
| unsigned int tdcs; | |
| }; | |
| /* EMI timing setting of m28w640hc of linux kernel */ | |
| const struct cust_emi_para emi_timing_m28w640hc = { | |
| .tap = 0x10, | |
| .tsdp = 0x05, | |
| .tdpw = 0x0a, | |
| .tdpr = 0x0a, | |
| .tdcs = 0x05, | |
| }; | |
| /* EMI timing setting of bootrom */ | |
| const struct cust_emi_para emi_timing_bootrom = { | |
| .tap = 0xf, | |
| .tsdp = 0x0, | |
| .tdpw = 0xff, | |
| .tdpr = 0x111, | |
| .tdcs = 0x02, | |
| }; | |
| void spear_emi_init(void) | |
| { | |
| const struct cust_emi_para *p = &emi_timing_m28w640hc; | |
| struct emi_regs *emi_regs_p = (struct emi_regs *)CONFIG_SPEAR_EMIBASE; | |
| unsigned int cs; | |
| unsigned int val, tmp; | |
| val = readl(CONFIG_SPEAR_RASBASE); | |
| if (val & EMI_ACKMSK) | |
| tmp = 0x3f; | |
| else | |
| tmp = 0x0; | |
| writel(tmp, &emi_regs_p->ack); | |
| for (cs = 0; cs < CONFIG_SYS_MAX_FLASH_BANKS; cs++) { | |
| writel(p->tap, &emi_regs_p->bank_regs[cs].tap); | |
| writel(p->tsdp, &emi_regs_p->bank_regs[cs].tsdp); | |
| writel(p->tdpw, &emi_regs_p->bank_regs[cs].tdpw); | |
| writel(p->tdpr, &emi_regs_p->bank_regs[cs].tdpr); | |
| writel(p->tdcs, &emi_regs_p->bank_regs[cs].tdcs); | |
| writel(EMI_CNTL_ENBBYTERW | ((val & 0x18) >> 3), | |
| &emi_regs_p->bank_regs[cs].control); | |
| } | |
| } | |
| #endif | |
| int spear_board_init(ulong mach_type) | |
| { | |
| struct xloader_table *xloader_tb = | |
| (struct xloader_table *)XLOADER_TABLE_ADDRESS; | |
| struct xloader_table_1_2 *table_1_2; | |
| struct chip_data *chip = &chip_data; | |
| gd->bd->bi_arch_number = mach_type; | |
| /* adress of boot parameters */ | |
| gd->bd->bi_boot_params = CONFIG_BOOT_PARAMS_ADDR; | |
| /* CPU is initialized to work at 333MHz in Xloader */ | |
| chip->cpufreq = 333; | |
| if (XLOADER_TABLE_VERSION_1_2 == xloader_tb->table_version) { | |
| table_1_2 = &xloader_tb->table.table_1_2; | |
| memcpy(chip->version, table_1_2->version, | |
| sizeof(chip->version)); | |
| } | |
| #ifdef CONFIG_SPEAR_EMI | |
| spear_emi_init(); | |
| #endif | |
| return 0; | |
| } | |
| static int i2c_read_mac(uchar *buffer) | |
| { | |
| u8 buf[2]; | |
| i2c_read(CONFIG_I2C_CHIPADDRESS, MAGIC_OFF, 1, buf, MAGIC_LEN); | |
| /* Check if mac in i2c memory is valid */ | |
| if ((buf[0] == MAGIC_BYTE0) && (buf[1] == MAGIC_BYTE1)) { | |
| /* Valid mac address is saved in i2c eeprom */ | |
| i2c_read(CONFIG_I2C_CHIPADDRESS, MAC_OFF, 1, buffer, MAC_LEN); | |
| return 0; | |
| } | |
| return -1; | |
| } | |
| static int write_mac(uchar *mac) | |
| { | |
| u8 buf[2]; | |
| buf[0] = (u8)MAGIC_BYTE0; | |
| buf[1] = (u8)MAGIC_BYTE1; | |
| i2c_write(CONFIG_I2C_CHIPADDRESS, MAGIC_OFF, 1, buf, MAGIC_LEN); | |
| buf[0] = (u8)~MAGIC_BYTE0; | |
| buf[1] = (u8)~MAGIC_BYTE1; | |
| i2c_read(CONFIG_I2C_CHIPADDRESS, MAGIC_OFF, 1, buf, MAGIC_LEN); | |
| /* check if valid MAC address is saved in I2C EEPROM or not? */ | |
| if ((buf[0] == MAGIC_BYTE0) && (buf[1] == MAGIC_BYTE1)) { | |
| i2c_write(CONFIG_I2C_CHIPADDRESS, MAC_OFF, 1, mac, MAC_LEN); | |
| puts("I2C EEPROM written with mac address \n"); | |
| return 0; | |
| } | |
| puts("I2C EEPROM writing failed \n"); | |
| return -1; | |
| } | |
| int do_chip_config(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) | |
| { | |
| void (*sram_setfreq) (unsigned int, unsigned int); | |
| struct chip_data *chip = &chip_data; | |
| unsigned char mac[6]; | |
| unsigned int reg, frequency; | |
| char *s, *e; | |
| char i2c_mac[20]; | |
| if ((argc > 3) || (argc < 2)) | |
| return cmd_usage(cmdtp); | |
| if ((!strcmp(argv[1], "cpufreq")) || (!strcmp(argv[1], "ddrfreq"))) { | |
| frequency = simple_strtoul(argv[2], NULL, 0); | |
| if (frequency > 333) { | |
| printf("Frequency is limited to 333MHz\n"); | |
| return 1; | |
| } | |
| sram_setfreq = memcpy((void *)SRAM_REL, setfreq, setfreq_sz); | |
| if (!strcmp(argv[1], "cpufreq")) { | |
| sram_setfreq(CPU, frequency); | |
| printf("CPU frequency changed to %u\n", frequency); | |
| chip->cpufreq = frequency; | |
| } else { | |
| sram_setfreq(DDR, frequency); | |
| printf("DDR frequency changed to %u\n", frequency); | |
| chip->dramfreq = frequency; | |
| } | |
| return 0; | |
| } else if (!strcmp(argv[1], "ethaddr")) { | |
| s = argv[2]; | |
| for (reg = 0; reg < 6; ++reg) { | |
| mac[reg] = s ? simple_strtoul(s, &e, 16) : 0; | |
| if (s) | |
| s = (*e) ? e + 1 : e; | |
| } | |
| write_mac(mac); | |
| return 0; | |
| } else if (!strcmp(argv[1], "print")) { | |
| if (chip->cpufreq == -1) | |
| printf("CPU Freq = Not Known\n"); | |
| else | |
| printf("CPU Freq = %d MHz\n", chip->cpufreq); | |
| if (chip->dramfreq == -1) | |
| printf("DDR Freq = Not Known\n"); | |
| else | |
| printf("DDR Freq = %d MHz\n", chip->dramfreq); | |
| if (chip->dramtype == DDRMOBILE) | |
| printf("DDR Type = MOBILE\n"); | |
| else if (chip->dramtype == DDR2) | |
| printf("DDR Type = DDR2\n"); | |
| else | |
| printf("DDR Type = Not Known\n"); | |
| if (!i2c_read_mac(mac)) { | |
| sprintf(i2c_mac, "%pM", mac); | |
| printf("Ethaddr (from i2c mem) = %s\n", i2c_mac); | |
| } else { | |
| printf("Ethaddr (from i2c mem) = Not set\n"); | |
| } | |
| printf("Xloader Rev = %s\n", chip->version); | |
| return 0; | |
| } | |
| return cmd_usage(cmdtp); | |
| } | |
| U_BOOT_CMD(chip_config, 3, 1, do_chip_config, | |
| "configure chip", | |
| "chip_config cpufreq/ddrfreq frequency\n" | |
| "chip_config print"); |