| /* | |
| * Dave Ethernet Controller driver | |
| * | |
| * Copyright (C) 2008 Dave S.r.l. <www.dave.eu> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| #include <common.h> | |
| #ifndef CONFIG_DNET_AUTONEG_TIMEOUT | |
| #define CONFIG_DNET_AUTONEG_TIMEOUT 5000000 /* default value */ | |
| #endif | |
| #include <net.h> | |
| #include <malloc.h> | |
| #include <linux/mii.h> | |
| #include <miiphy.h> | |
| #include <asm/io.h> | |
| #include "dnet.h" | |
| struct dnet_device { | |
| struct dnet_registers *regs; | |
| const struct device *dev; | |
| struct eth_device netdev; | |
| unsigned short phy_addr; | |
| }; | |
| /* get struct dnet_device from given struct netdev */ | |
| #define to_dnet(_nd) container_of(_nd, struct dnet_device, netdev) | |
| /* function for reading internal MAC register */ | |
| u16 dnet_readw_mac(struct dnet_device *dnet, u16 reg) | |
| { | |
| u16 data_read; | |
| /* issue a read */ | |
| writel(reg, &dnet->regs->MACREG_ADDR); | |
| /* since a read/write op to the MAC is very slow, | |
| * we must wait before reading the data */ | |
| udelay(1); | |
| /* read data read from the MAC register */ | |
| data_read = readl(&dnet->regs->MACREG_DATA); | |
| /* all done */ | |
| return data_read; | |
| } | |
| /* function for writing internal MAC register */ | |
| void dnet_writew_mac(struct dnet_device *dnet, u16 reg, u16 val) | |
| { | |
| /* load data to write */ | |
| writel(val, &dnet->regs->MACREG_DATA); | |
| /* issue a write */ | |
| writel(reg | DNET_INTERNAL_WRITE, &dnet->regs->MACREG_ADDR); | |
| /* since a read/write op to the MAC is very slow, | |
| * we must wait before exiting */ | |
| udelay(1); | |
| } | |
| static void dnet_mdio_write(struct dnet_device *dnet, u8 reg, u16 value) | |
| { | |
| u16 tmp; | |
| debug(DRIVERNAME "dnet_mdio_write %02x:%02x <- %04x\n", | |
| dnet->phy_addr, reg, value); | |
| while (!(dnet_readw_mac(dnet, DNET_INTERNAL_GMII_MNG_CTL_REG) & | |
| DNET_INTERNAL_GMII_MNG_CMD_FIN)) | |
| ; | |
| /* prepare for a write operation */ | |
| tmp = (1 << 13); | |
| /* only 5 bits allowed for register offset */ | |
| reg &= 0x1f; | |
| /* prepare reg_value for a write */ | |
| tmp |= (dnet->phy_addr << 8); | |
| tmp |= reg; | |
| /* write data to write first */ | |
| dnet_writew_mac(dnet, DNET_INTERNAL_GMII_MNG_DAT_REG, value); | |
| /* write control word */ | |
| dnet_writew_mac(dnet, DNET_INTERNAL_GMII_MNG_CTL_REG, tmp); | |
| while (!(dnet_readw_mac(dnet, DNET_INTERNAL_GMII_MNG_CTL_REG) & | |
| DNET_INTERNAL_GMII_MNG_CMD_FIN)) | |
| ; | |
| } | |
| static u16 dnet_mdio_read(struct dnet_device *dnet, u8 reg) | |
| { | |
| u16 value; | |
| while (!(dnet_readw_mac(dnet, DNET_INTERNAL_GMII_MNG_CTL_REG) & | |
| DNET_INTERNAL_GMII_MNG_CMD_FIN)) | |
| ; | |
| /* only 5 bits allowed for register offset*/ | |
| reg &= 0x1f; | |
| /* prepare reg_value for a read */ | |
| value = (dnet->phy_addr << 8); | |
| value |= reg; | |
| /* write control word */ | |
| dnet_writew_mac(dnet, DNET_INTERNAL_GMII_MNG_CTL_REG, value); | |
| /* wait for end of transfer */ | |
| while (!(dnet_readw_mac(dnet, DNET_INTERNAL_GMII_MNG_CTL_REG) & | |
| DNET_INTERNAL_GMII_MNG_CMD_FIN)) | |
| ; | |
| value = dnet_readw_mac(dnet, DNET_INTERNAL_GMII_MNG_DAT_REG); | |
| debug(DRIVERNAME "dnet_mdio_read %02x:%02x <- %04x\n", | |
| dnet->phy_addr, reg, value); | |
| return value; | |
| } | |
| static int dnet_send(struct eth_device *netdev, volatile void *packet, | |
| int length) | |
| { | |
| struct dnet_device *dnet = to_dnet(netdev); | |
| int i, len, wrsz; | |
| unsigned int *bufp; | |
| unsigned int tx_cmd; | |
| debug(DRIVERNAME "[%s] Sending %u bytes\n", __func__, length); | |
| /* frame size (words) */ | |
| len = (length + 3) >> 2; | |
| bufp = (unsigned int *) (((u32)packet) & 0xFFFFFFFC); | |
| wrsz = (u32)length + 3; | |
| wrsz += ((u32)packet) & 0x3; | |
| wrsz >>= 2; | |
| tx_cmd = ((((unsigned int)(packet)) & 0x03) << 16) | (u32)length; | |
| /* check if there is enough room for the current frame */ | |
| if (wrsz < (DNET_FIFO_SIZE - readl(&dnet->regs->TX_FIFO_WCNT))) { | |
| for (i = 0; i < wrsz; i++) | |
| writel(*bufp++, &dnet->regs->TX_DATA_FIFO); | |
| /* | |
| * inform MAC that a packet's written and ready | |
| * to be shipped out | |
| */ | |
| writel(tx_cmd, &dnet->regs->TX_LEN_FIFO); | |
| } else { | |
| printf(DRIVERNAME "No free space (actual %d, required %d " | |
| "(words))\n", DNET_FIFO_SIZE - | |
| readl(&dnet->regs->TX_FIFO_WCNT), wrsz); | |
| } | |
| /* No one cares anyway */ | |
| return 0; | |
| } | |
| static int dnet_recv(struct eth_device *netdev) | |
| { | |
| struct dnet_device *dnet = to_dnet(netdev); | |
| unsigned int *data_ptr; | |
| int pkt_len, poll, i; | |
| u32 cmd_word; | |
| debug("Waiting for pkt (polling)\n"); | |
| poll = 50; | |
| while ((readl(&dnet->regs->RX_FIFO_WCNT) >> 16) == 0) { | |
| udelay(10); /* wait 10 usec */ | |
| if (--poll == 0) | |
| return 0; /* no pkt available */ | |
| } | |
| cmd_word = readl(&dnet->regs->RX_LEN_FIFO); | |
| pkt_len = cmd_word & 0xFFFF; | |
| debug("Got pkt with size %d bytes\n", pkt_len); | |
| if (cmd_word & 0xDF180000) | |
| printf("%s packet receive error %x\n", __func__, cmd_word); | |
| data_ptr = (unsigned int *) NetRxPackets[0]; | |
| for (i = 0; i < (pkt_len + 3) >> 2; i++) | |
| *data_ptr++ = readl(&dnet->regs->RX_DATA_FIFO); | |
| NetReceive(NetRxPackets[0], pkt_len + 5); /* ok + 5 ?? */ | |
| return 0; | |
| } | |
| static void dnet_set_hwaddr(struct eth_device *netdev) | |
| { | |
| struct dnet_device *dnet = to_dnet(netdev); | |
| u16 tmp; | |
| tmp = cpu_to_be16(*((u16 *)netdev->enetaddr)); | |
| dnet_writew_mac(dnet, DNET_INTERNAL_MAC_ADDR_0_REG, tmp); | |
| tmp = cpu_to_be16(*((u16 *)(netdev->enetaddr + 2))); | |
| dnet_writew_mac(dnet, DNET_INTERNAL_MAC_ADDR_1_REG, tmp); | |
| tmp = cpu_to_be16(*((u16 *)(netdev->enetaddr + 4))); | |
| dnet_writew_mac(dnet, DNET_INTERNAL_MAC_ADDR_2_REG, tmp); | |
| } | |
| static void dnet_phy_reset(struct dnet_device *dnet) | |
| { | |
| struct eth_device *netdev = &dnet->netdev; | |
| int i; | |
| u16 status, adv; | |
| adv = ADVERTISE_CSMA | ADVERTISE_ALL; | |
| dnet_mdio_write(dnet, MII_ADVERTISE, adv); | |
| printf("%s: Starting autonegotiation...\n", netdev->name); | |
| dnet_mdio_write(dnet, MII_BMCR, (BMCR_ANENABLE | |
| | BMCR_ANRESTART)); | |
| for (i = 0; i < CONFIG_DNET_AUTONEG_TIMEOUT / 100; i++) { | |
| status = dnet_mdio_read(dnet, MII_BMSR); | |
| if (status & BMSR_ANEGCOMPLETE) | |
| break; | |
| udelay(100); | |
| } | |
| if (status & BMSR_ANEGCOMPLETE) | |
| printf("%s: Autonegotiation complete\n", netdev->name); | |
| else | |
| printf("%s: Autonegotiation timed out (status=0x%04x)\n", | |
| netdev->name, status); | |
| } | |
| static int dnet_phy_init(struct dnet_device *dnet) | |
| { | |
| struct eth_device *netdev = &dnet->netdev; | |
| u16 phy_id, status, adv, lpa; | |
| int media, speed, duplex; | |
| int i; | |
| u32 ctl_reg; | |
| /* Find a PHY */ | |
| for (i = 0; i < 32; i++) { | |
| dnet->phy_addr = i; | |
| phy_id = dnet_mdio_read(dnet, MII_PHYSID1); | |
| if (phy_id != 0xffff) { | |
| /* ok we found it */ | |
| printf("Found PHY at address %d PHYID (%04x:%04x)\n", | |
| i, phy_id, | |
| dnet_mdio_read(dnet, MII_PHYSID2)); | |
| break; | |
| } | |
| } | |
| /* Check if the PHY is up to snuff... */ | |
| phy_id = dnet_mdio_read(dnet, MII_PHYSID1); | |
| if (phy_id == 0xffff) { | |
| printf("%s: No PHY present\n", netdev->name); | |
| return -1; | |
| } | |
| status = dnet_mdio_read(dnet, MII_BMSR); | |
| if (!(status & BMSR_LSTATUS)) { | |
| /* Try to re-negotiate if we don't have link already. */ | |
| dnet_phy_reset(dnet); | |
| for (i = 0; i < CONFIG_DNET_AUTONEG_TIMEOUT / 100; i++) { | |
| status = dnet_mdio_read(dnet, MII_BMSR); | |
| if (status & BMSR_LSTATUS) | |
| break; | |
| udelay(100); | |
| } | |
| } | |
| if (!(status & BMSR_LSTATUS)) { | |
| printf("%s: link down (status: 0x%04x)\n", | |
| netdev->name, status); | |
| return -1; | |
| } else { | |
| adv = dnet_mdio_read(dnet, MII_ADVERTISE); | |
| lpa = dnet_mdio_read(dnet, MII_LPA); | |
| media = mii_nway_result(lpa & adv); | |
| speed = (media & (ADVERTISE_100FULL | ADVERTISE_100HALF) | |
| ? 1 : 0); | |
| duplex = (media & ADVERTISE_FULL) ? 1 : 0; | |
| /* 1000BaseT ethernet is not supported */ | |
| printf("%s: link up, %sMbps %s-duplex (lpa: 0x%04x)\n", | |
| netdev->name, | |
| speed ? "100" : "10", | |
| duplex ? "full" : "half", | |
| lpa); | |
| ctl_reg = dnet_readw_mac(dnet, DNET_INTERNAL_RXTX_CONTROL_REG); | |
| if (duplex) | |
| ctl_reg &= ~(DNET_INTERNAL_RXTX_CONTROL_ENABLEHALFDUP); | |
| else | |
| ctl_reg |= DNET_INTERNAL_RXTX_CONTROL_ENABLEHALFDUP; | |
| dnet_writew_mac(dnet, DNET_INTERNAL_RXTX_CONTROL_REG, ctl_reg); | |
| return 0; | |
| } | |
| } | |
| static int dnet_init(struct eth_device *netdev, bd_t *bd) | |
| { | |
| struct dnet_device *dnet = to_dnet(netdev); | |
| u32 config; | |
| /* | |
| * dnet_halt should have been called at some point before now, | |
| * so we'll assume the controller is idle. | |
| */ | |
| /* set hardware address */ | |
| dnet_set_hwaddr(netdev); | |
| if (dnet_phy_init(dnet) < 0) | |
| return -1; | |
| /* flush rx/tx fifos */ | |
| writel(DNET_SYS_CTL_RXFIFOFLUSH | DNET_SYS_CTL_TXFIFOFLUSH, | |
| &dnet->regs->SYS_CTL); | |
| udelay(1000); | |
| writel(0, &dnet->regs->SYS_CTL); | |
| config = dnet_readw_mac(dnet, DNET_INTERNAL_RXTX_CONTROL_REG); | |
| config |= DNET_INTERNAL_RXTX_CONTROL_RXPAUSE | | |
| DNET_INTERNAL_RXTX_CONTROL_RXBROADCAST | | |
| DNET_INTERNAL_RXTX_CONTROL_DROPCONTROL | | |
| DNET_INTERNAL_RXTX_CONTROL_DISCFXFCS; | |
| dnet_writew_mac(dnet, DNET_INTERNAL_RXTX_CONTROL_REG, config); | |
| /* Enable TX and RX */ | |
| dnet_writew_mac(dnet, DNET_INTERNAL_MODE_REG, | |
| DNET_INTERNAL_MODE_RXEN | DNET_INTERNAL_MODE_TXEN); | |
| return 0; | |
| } | |
| static void dnet_halt(struct eth_device *netdev) | |
| { | |
| struct dnet_device *dnet = to_dnet(netdev); | |
| /* Disable TX and RX */ | |
| dnet_writew_mac(dnet, DNET_INTERNAL_MODE_REG, 0); | |
| } | |
| int dnet_eth_initialize(int id, void *regs, unsigned int phy_addr) | |
| { | |
| struct dnet_device *dnet; | |
| struct eth_device *netdev; | |
| unsigned int dev_capa; | |
| dnet = malloc(sizeof(struct dnet_device)); | |
| if (!dnet) { | |
| printf("Error: Failed to allocate memory for DNET%d\n", id); | |
| return -1; | |
| } | |
| memset(dnet, 0, sizeof(struct dnet_device)); | |
| netdev = &dnet->netdev; | |
| dnet->regs = (struct dnet_registers *)regs; | |
| dnet->phy_addr = phy_addr; | |
| sprintf(netdev->name, "dnet%d", id); | |
| netdev->init = dnet_init; | |
| netdev->halt = dnet_halt; | |
| netdev->send = dnet_send; | |
| netdev->recv = dnet_recv; | |
| dev_capa = readl(&dnet->regs->VERCAPS) & 0xFFFF; | |
| debug("%s: has %smdio, %sirq, %sgigabit, %sdma \n", netdev->name, | |
| (dev_capa & DNET_HAS_MDIO) ? "" : "no ", | |
| (dev_capa & DNET_HAS_IRQ) ? "" : "no ", | |
| (dev_capa & DNET_HAS_GIGABIT) ? "" : "no ", | |
| (dev_capa & DNET_HAS_DMA) ? "" : "no "); | |
| eth_register(netdev); | |
| return 0; | |
| } |