| /* | |
| * Faraday FTGMAC100 Ethernet | |
| * | |
| * (C) Copyright 2009 Faraday Technology | |
| * Po-Yu Chuang <ratbert@faraday-tech.com> | |
| * | |
| * (C) Copyright 2010 Andes Technology | |
| * Macpaul Lin <macpaul@andestech.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
| */ | |
| #include <config.h> | |
| #include <common.h> | |
| #include <malloc.h> | |
| #include <net.h> | |
| #include <asm/io.h> | |
| #include <linux/mii.h> | |
| #include "ftgmac100.h" | |
| #define ETH_ZLEN 60 | |
| #define mdelay(n) ({unsigned long msec = (n); while (msec--) udelay(1000); }) | |
| /* RBSR - hw default init value is also 0x640 */ | |
| #define RBSR_DEFAULT_VALUE 0x640 | |
| /* PKTBUFSTX/PKTBUFSRX must both be power of 2 */ | |
| #define PKTBUFSTX 4 /* must be power of 2 */ | |
| struct ftgmac100_data { | |
| struct ftgmac100_txdes txdes[PKTBUFSTX]; | |
| struct ftgmac100_rxdes rxdes[PKTBUFSRX]; | |
| int tx_index; | |
| int rx_index; | |
| int phy_addr; | |
| }; | |
| /* | |
| * struct mii_bus functions | |
| */ | |
| static int ftgmac100_mdiobus_read(struct eth_device *dev, int phy_addr, | |
| int regnum) | |
| { | |
| struct ftgmac100 *ftgmac100 = (struct ftgmac100 *)dev->iobase; | |
| int phycr; | |
| int i; | |
| phycr = readl(&ftgmac100->phycr); | |
| /* preserve MDC cycle threshold */ | |
| phycr &= FTGMAC100_PHYCR_MDC_CYCTHR_MASK; | |
| phycr |= FTGMAC100_PHYCR_PHYAD(phy_addr) | |
| | FTGMAC100_PHYCR_REGAD(regnum) | |
| | FTGMAC100_PHYCR_MIIRD; | |
| writel(phycr, &ftgmac100->phycr); | |
| for (i = 0; i < 10; i++) { | |
| phycr = readl(&ftgmac100->phycr); | |
| if ((phycr & FTGMAC100_PHYCR_MIIRD) == 0) { | |
| int data; | |
| data = readl(&ftgmac100->phydata); | |
| return FTGMAC100_PHYDATA_MIIRDATA(data); | |
| } | |
| mdelay(10); | |
| } | |
| debug("mdio read timed out\n"); | |
| return -1; | |
| } | |
| static int ftgmac100_mdiobus_write(struct eth_device *dev, int phy_addr, | |
| int regnum, u16 value) | |
| { | |
| struct ftgmac100 *ftgmac100 = (struct ftgmac100 *)dev->iobase; | |
| int phycr; | |
| int data; | |
| int i; | |
| phycr = readl(&ftgmac100->phycr); | |
| /* preserve MDC cycle threshold */ | |
| phycr &= FTGMAC100_PHYCR_MDC_CYCTHR_MASK; | |
| phycr |= FTGMAC100_PHYCR_PHYAD(phy_addr) | |
| | FTGMAC100_PHYCR_REGAD(regnum) | |
| | FTGMAC100_PHYCR_MIIWR; | |
| data = FTGMAC100_PHYDATA_MIIWDATA(value); | |
| writel(data, &ftgmac100->phydata); | |
| writel(phycr, &ftgmac100->phycr); | |
| for (i = 0; i < 10; i++) { | |
| phycr = readl(&ftgmac100->phycr); | |
| if ((phycr & FTGMAC100_PHYCR_MIIWR) == 0) { | |
| debug("(phycr & FTGMAC100_PHYCR_MIIWR) == 0: " \ | |
| "phy_addr: %x\n", phy_addr); | |
| return 0; | |
| } | |
| mdelay(1); | |
| } | |
| debug("mdio write timed out\n"); | |
| return -1; | |
| } | |
| int ftgmac100_phy_read(struct eth_device *dev, int addr, int reg, u16 *value) | |
| { | |
| *value = ftgmac100_mdiobus_read(dev , addr, reg); | |
| if (*value == -1) | |
| return -1; | |
| return 0; | |
| } | |
| int ftgmac100_phy_write(struct eth_device *dev, int addr, int reg, u16 value) | |
| { | |
| if (ftgmac100_mdiobus_write(dev, addr, reg, value) == -1) | |
| return -1; | |
| return 0; | |
| } | |
| static int ftgmac100_phy_reset(struct eth_device *dev) | |
| { | |
| struct ftgmac100_data *priv = dev->priv; | |
| int i; | |
| u16 status, adv; | |
| adv = ADVERTISE_CSMA | ADVERTISE_ALL; | |
| ftgmac100_phy_write(dev, priv->phy_addr, MII_ADVERTISE, adv); | |
| printf("%s: Starting autonegotiation...\n", dev->name); | |
| ftgmac100_phy_write(dev, priv->phy_addr, | |
| MII_BMCR, (BMCR_ANENABLE | BMCR_ANRESTART)); | |
| for (i = 0; i < 100000 / 100; i++) { | |
| ftgmac100_phy_read(dev, priv->phy_addr, MII_BMSR, &status); | |
| if (status & BMSR_ANEGCOMPLETE) | |
| break; | |
| mdelay(1); | |
| } | |
| if (status & BMSR_ANEGCOMPLETE) { | |
| printf("%s: Autonegotiation complete\n", dev->name); | |
| } else { | |
| printf("%s: Autonegotiation timed out (status=0x%04x)\n", | |
| dev->name, status); | |
| return 0; | |
| } | |
| return 1; | |
| } | |
| static int ftgmac100_phy_init(struct eth_device *dev) | |
| { | |
| struct ftgmac100_data *priv = dev->priv; | |
| int phy_addr; | |
| u16 phy_id, status, adv, lpa, stat_ge; | |
| int media, speed, duplex; | |
| int i; | |
| /* Check if the PHY is up to snuff... */ | |
| for (phy_addr = 0; phy_addr < CONFIG_PHY_MAX_ADDR; phy_addr++) { | |
| ftgmac100_phy_read(dev, phy_addr, MII_PHYSID1, &phy_id); | |
| /* | |
| * When it is unable to found PHY, | |
| * the interface usually return 0xffff or 0x0000 | |
| */ | |
| if (phy_id != 0xffff && phy_id != 0x0) { | |
| printf("%s: found PHY at 0x%02x\n", | |
| dev->name, phy_addr); | |
| priv->phy_addr = phy_addr; | |
| break; | |
| } | |
| } | |
| if (phy_id == 0xffff || phy_id == 0x0) { | |
| printf("%s: no PHY present\n", dev->name); | |
| return 0; | |
| } | |
| ftgmac100_phy_read(dev, priv->phy_addr, MII_BMSR, &status); | |
| if (!(status & BMSR_LSTATUS)) { | |
| /* Try to re-negotiate if we don't have link already. */ | |
| ftgmac100_phy_reset(dev); | |
| for (i = 0; i < 100000 / 100; i++) { | |
| ftgmac100_phy_read(dev, priv->phy_addr, | |
| MII_BMSR, &status); | |
| if (status & BMSR_LSTATUS) | |
| break; | |
| udelay(100); | |
| } | |
| } | |
| if (!(status & BMSR_LSTATUS)) { | |
| printf("%s: link down\n", dev->name); | |
| return 0; | |
| } | |
| #ifdef CONFIG_FTGMAC100_EGIGA | |
| /* 1000 Base-T Status Register */ | |
| ftgmac100_phy_read(dev, priv->phy_addr, | |
| MII_STAT1000, &stat_ge); | |
| speed = (stat_ge & (LPA_1000FULL | LPA_1000HALF) | |
| ? 1 : 0); | |
| duplex = ((stat_ge & LPA_1000FULL) | |
| ? 1 : 0); | |
| if (speed) { /* Speed is 1000 */ | |
| printf("%s: link up, 1000bps %s-duplex\n", | |
| dev->name, duplex ? "full" : "half"); | |
| return 0; | |
| } | |
| #endif | |
| ftgmac100_phy_read(dev, priv->phy_addr, MII_ADVERTISE, &adv); | |
| ftgmac100_phy_read(dev, priv->phy_addr, MII_LPA, &lpa); | |
| media = mii_nway_result(lpa & adv); | |
| speed = (media & (ADVERTISE_100FULL | ADVERTISE_100HALF) ? 1 : 0); | |
| duplex = (media & ADVERTISE_FULL) ? 1 : 0; | |
| printf("%s: link up, %sMbps %s-duplex\n", | |
| dev->name, speed ? "100" : "10", duplex ? "full" : "half"); | |
| return 1; | |
| } | |
| static int ftgmac100_update_link_speed(struct eth_device *dev) | |
| { | |
| struct ftgmac100 *ftgmac100 = (struct ftgmac100 *)dev->iobase; | |
| struct ftgmac100_data *priv = dev->priv; | |
| unsigned short stat_fe; | |
| unsigned short stat_ge; | |
| unsigned int maccr; | |
| #ifdef CONFIG_FTGMAC100_EGIGA | |
| /* 1000 Base-T Status Register */ | |
| ftgmac100_phy_read(dev, priv->phy_addr, MII_STAT1000, &stat_ge); | |
| #endif | |
| ftgmac100_phy_read(dev, priv->phy_addr, MII_BMSR, &stat_fe); | |
| if (!(stat_fe & BMSR_LSTATUS)) /* link status up? */ | |
| return 0; | |
| /* read MAC control register and clear related bits */ | |
| maccr = readl(&ftgmac100->maccr) & | |
| ~(FTGMAC100_MACCR_GIGA_MODE | | |
| FTGMAC100_MACCR_FAST_MODE | | |
| FTGMAC100_MACCR_FULLDUP); | |
| #ifdef CONFIG_FTGMAC100_EGIGA | |
| if (stat_ge & LPA_1000FULL) { | |
| /* set gmac for 1000BaseTX and Full Duplex */ | |
| maccr |= FTGMAC100_MACCR_GIGA_MODE | FTGMAC100_MACCR_FULLDUP; | |
| } | |
| if (stat_ge & LPA_1000HALF) { | |
| /* set gmac for 1000BaseTX and Half Duplex */ | |
| maccr |= FTGMAC100_MACCR_GIGA_MODE; | |
| } | |
| #endif | |
| if (stat_fe & BMSR_100FULL) { | |
| /* set MII for 100BaseTX and Full Duplex */ | |
| maccr |= FTGMAC100_MACCR_FAST_MODE | FTGMAC100_MACCR_FULLDUP; | |
| } | |
| if (stat_fe & BMSR_10FULL) { | |
| /* set MII for 10BaseT and Full Duplex */ | |
| maccr |= FTGMAC100_MACCR_FULLDUP; | |
| } | |
| if (stat_fe & BMSR_100HALF) { | |
| /* set MII for 100BaseTX and Half Duplex */ | |
| maccr |= FTGMAC100_MACCR_FAST_MODE; | |
| } | |
| if (stat_fe & BMSR_10HALF) { | |
| /* set MII for 10BaseT and Half Duplex */ | |
| /* we have already clear these bits, do nothing */ | |
| ; | |
| } | |
| /* update MII config into maccr */ | |
| writel(maccr, &ftgmac100->maccr); | |
| return 1; | |
| } | |
| /* | |
| * Reset MAC | |
| */ | |
| static void ftgmac100_reset(struct eth_device *dev) | |
| { | |
| struct ftgmac100 *ftgmac100 = (struct ftgmac100 *)dev->iobase; | |
| debug("%s()\n", __func__); | |
| writel(FTGMAC100_MACCR_SW_RST, &ftgmac100->maccr); | |
| while (readl(&ftgmac100->maccr) & FTGMAC100_MACCR_SW_RST) | |
| ; | |
| } | |
| /* | |
| * Set MAC address | |
| */ | |
| static void ftgmac100_set_mac(struct eth_device *dev, | |
| const unsigned char *mac) | |
| { | |
| struct ftgmac100 *ftgmac100 = (struct ftgmac100 *)dev->iobase; | |
| unsigned int maddr = mac[0] << 8 | mac[1]; | |
| unsigned int laddr = mac[2] << 24 | mac[3] << 16 | mac[4] << 8 | mac[5]; | |
| debug("%s(%x %x)\n", __func__, maddr, laddr); | |
| writel(maddr, &ftgmac100->mac_madr); | |
| writel(laddr, &ftgmac100->mac_ladr); | |
| } | |
| static void ftgmac100_set_mac_from_env(struct eth_device *dev) | |
| { | |
| eth_getenv_enetaddr("ethaddr", dev->enetaddr); | |
| ftgmac100_set_mac(dev, dev->enetaddr); | |
| } | |
| /* | |
| * disable transmitter, receiver | |
| */ | |
| static void ftgmac100_halt(struct eth_device *dev) | |
| { | |
| struct ftgmac100 *ftgmac100 = (struct ftgmac100 *)dev->iobase; | |
| debug("%s()\n", __func__); | |
| writel(0, &ftgmac100->maccr); | |
| } | |
| static int ftgmac100_init(struct eth_device *dev, bd_t *bd) | |
| { | |
| struct ftgmac100 *ftgmac100 = (struct ftgmac100 *)dev->iobase; | |
| struct ftgmac100_data *priv = dev->priv; | |
| struct ftgmac100_txdes *txdes = priv->txdes; | |
| struct ftgmac100_rxdes *rxdes = priv->rxdes; | |
| unsigned int maccr; | |
| int i; | |
| debug("%s()\n", __func__); | |
| ftgmac100_reset(dev); | |
| /* set the ethernet address */ | |
| ftgmac100_set_mac_from_env(dev); | |
| /* disable all interrupts */ | |
| writel(0, &ftgmac100->ier); | |
| /* initialize descriptors */ | |
| priv->tx_index = 0; | |
| priv->rx_index = 0; | |
| txdes[PKTBUFSTX - 1].txdes0 = FTGMAC100_TXDES0_EDOTR; | |
| rxdes[PKTBUFSRX - 1].rxdes0 = FTGMAC100_RXDES0_EDORR; | |
| for (i = 0; i < PKTBUFSTX; i++) { | |
| /* TXBUF_BADR */ | |
| txdes[i].txdes3 = 0; | |
| txdes[i].txdes1 = 0; | |
| } | |
| for (i = 0; i < PKTBUFSRX; i++) { | |
| /* RXBUF_BADR */ | |
| rxdes[i].rxdes3 = (unsigned int)NetRxPackets[i]; | |
| rxdes[i].rxdes0 &= ~FTGMAC100_RXDES0_RXPKT_RDY; | |
| } | |
| /* transmit ring */ | |
| writel((unsigned int)txdes, &ftgmac100->txr_badr); | |
| /* receive ring */ | |
| writel((unsigned int)rxdes, &ftgmac100->rxr_badr); | |
| /* poll receive descriptor automatically */ | |
| writel(FTGMAC100_APTC_RXPOLL_CNT(1), &ftgmac100->aptc); | |
| /* config receive buffer size register */ | |
| writel(FTGMAC100_RBSR_SIZE(RBSR_DEFAULT_VALUE), &ftgmac100->rbsr); | |
| /* enable transmitter, receiver */ | |
| maccr = FTGMAC100_MACCR_TXMAC_EN | | |
| FTGMAC100_MACCR_RXMAC_EN | | |
| FTGMAC100_MACCR_TXDMA_EN | | |
| FTGMAC100_MACCR_RXDMA_EN | | |
| FTGMAC100_MACCR_CRC_APD | | |
| FTGMAC100_MACCR_FULLDUP | | |
| FTGMAC100_MACCR_RX_RUNT | | |
| FTGMAC100_MACCR_RX_BROADPKT; | |
| writel(maccr, &ftgmac100->maccr); | |
| if (!ftgmac100_phy_init(dev)) { | |
| if (!ftgmac100_update_link_speed(dev)) | |
| return -1; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Get a data block via Ethernet | |
| */ | |
| static int ftgmac100_recv(struct eth_device *dev) | |
| { | |
| struct ftgmac100_data *priv = dev->priv; | |
| struct ftgmac100_rxdes *curr_des; | |
| unsigned short rxlen; | |
| curr_des = &priv->rxdes[priv->rx_index]; | |
| if (!(curr_des->rxdes0 & FTGMAC100_RXDES0_RXPKT_RDY)) | |
| return -1; | |
| if (curr_des->rxdes0 & (FTGMAC100_RXDES0_RX_ERR | | |
| FTGMAC100_RXDES0_CRC_ERR | | |
| FTGMAC100_RXDES0_FTL | | |
| FTGMAC100_RXDES0_RUNT | | |
| FTGMAC100_RXDES0_RX_ODD_NB)) { | |
| return -1; | |
| } | |
| rxlen = FTGMAC100_RXDES0_VDBC(curr_des->rxdes0); | |
| debug("%s(): RX buffer %d, %x received\n", | |
| __func__, priv->rx_index, rxlen); | |
| /* pass the packet up to the protocol layers. */ | |
| NetReceive((void *)curr_des->rxdes3, rxlen); | |
| /* release buffer to DMA */ | |
| curr_des->rxdes0 &= ~FTGMAC100_RXDES0_RXPKT_RDY; | |
| priv->rx_index = (priv->rx_index + 1) % PKTBUFSRX; | |
| return 0; | |
| } | |
| /* | |
| * Send a data block via Ethernet | |
| */ | |
| static int | |
| ftgmac100_send(struct eth_device *dev, void *packet, int length) | |
| { | |
| struct ftgmac100 *ftgmac100 = (struct ftgmac100 *)dev->iobase; | |
| struct ftgmac100_data *priv = dev->priv; | |
| struct ftgmac100_txdes *curr_des = &priv->txdes[priv->tx_index]; | |
| int start; | |
| if (curr_des->txdes0 & FTGMAC100_TXDES0_TXDMA_OWN) { | |
| debug("%s(): no TX descriptor available\n", __func__); | |
| return -1; | |
| } | |
| debug("%s(%x, %x)\n", __func__, (int)packet, length); | |
| length = (length < ETH_ZLEN) ? ETH_ZLEN : length; | |
| /* initiate a transmit sequence */ | |
| curr_des->txdes3 = (unsigned int)packet; /* TXBUF_BADR */ | |
| /* only one descriptor on TXBUF */ | |
| curr_des->txdes0 &= FTGMAC100_TXDES0_EDOTR; | |
| curr_des->txdes0 |= FTGMAC100_TXDES0_FTS | | |
| FTGMAC100_TXDES0_LTS | | |
| FTGMAC100_TXDES0_TXBUF_SIZE(length) | | |
| FTGMAC100_TXDES0_TXDMA_OWN ; | |
| /* start transmit */ | |
| writel(1, &ftgmac100->txpd); | |
| /* wait for transfer to succeed */ | |
| start = get_timer(0); | |
| while (curr_des->txdes0 & FTGMAC100_TXDES0_TXDMA_OWN) { | |
| if (get_timer(0) >= 5) { | |
| debug("%s(): timed out\n", __func__); | |
| return -1; | |
| } | |
| } | |
| debug("%s(): packet sent\n", __func__); | |
| priv->tx_index = (priv->tx_index + 1) % PKTBUFSTX; | |
| return 0; | |
| } | |
| int ftgmac100_initialize(bd_t *bd) | |
| { | |
| struct eth_device *dev; | |
| struct ftgmac100_data *priv; | |
| dev = malloc(sizeof *dev); | |
| if (!dev) { | |
| printf("%s(): failed to allocate dev\n", __func__); | |
| goto out; | |
| } | |
| /* Transmit and receive descriptors should align to 16 bytes */ | |
| priv = memalign(16, sizeof(struct ftgmac100_data)); | |
| if (!priv) { | |
| printf("%s(): failed to allocate priv\n", __func__); | |
| goto free_dev; | |
| } | |
| memset(dev, 0, sizeof(*dev)); | |
| memset(priv, 0, sizeof(*priv)); | |
| sprintf(dev->name, "FTGMAC100"); | |
| dev->iobase = CONFIG_FTGMAC100_BASE; | |
| dev->init = ftgmac100_init; | |
| dev->halt = ftgmac100_halt; | |
| dev->send = ftgmac100_send; | |
| dev->recv = ftgmac100_recv; | |
| dev->priv = priv; | |
| eth_register(dev); | |
| return 1; | |
| free_dev: | |
| free(dev); | |
| out: | |
| return 0; | |
| } |