|  | /* | 
|  | **===================================================================== | 
|  | ** | 
|  | ** Copyright (C) 2000, 2001, 2002, 2003 | 
|  | ** The LEOX team <team@leox.org>, http://www.leox.org | 
|  | ** | 
|  | ** LEOX.org is about the development of free hardware and software resources | 
|  | **   for system on chip. | 
|  | ** | 
|  | ** Description: U-Boot port on the LEOX's ELPT860 CPU board | 
|  | ** ~~~~~~~~~~~ | 
|  | ** | 
|  | **===================================================================== | 
|  | ** | 
|  | ** This program is free software; you can redistribute it and/or | 
|  | ** modify it under the terms of the GNU General Public License as | 
|  | ** published by the Free Software Foundation; either version 2 of | 
|  | ** the License, or (at your option) any later version. | 
|  | ** | 
|  | ** This program is distributed in the hope that it will be useful, | 
|  | ** but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | ** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | ** GNU General Public License for more details. | 
|  | ** | 
|  | ** You should have received a copy of the GNU General Public License | 
|  | ** along with this program; if not, write to the Free Software | 
|  | ** Foundation, Inc., 59 Temple Place, Suite 330, Boston, | 
|  | ** MA 02111-1307 USA | 
|  | ** | 
|  | **===================================================================== | 
|  | */ | 
|  |  | 
|  | /* | 
|  | ** Note 1: In this file, you have to provide the following variable: | 
|  | ** ------ | 
|  | **              flash_info_t    flash_info[CONFIG_SYS_MAX_FLASH_BANKS] | 
|  | ** 'flash_info_t' structure is defined into 'include/flash.h' | 
|  | ** and defined as extern into 'common/cmd_flash.c' | 
|  | ** | 
|  | ** Note 2: In this file, you have to provide the following functions: | 
|  | ** ------ | 
|  | **              unsigned long   flash_init(void) | 
|  | ** called from 'board_init_r()' into 'common/board.c' | 
|  | ** | 
|  | **              void            flash_print_info(flash_info_t *info) | 
|  | ** called from 'do_flinfo()' into 'common/cmd_flash.c' | 
|  | ** | 
|  | **              int             flash_erase(flash_info_t *info, | 
|  | **                                          int           s_first, | 
|  | **                                          int           s_last) | 
|  | ** called from 'do_flerase()' & 'flash_sect_erase()' into 'common/cmd_flash.c' | 
|  | ** | 
|  | **              int             write_buff (flash_info_t *info, | 
|  | **                                          uchar        *src, | 
|  | **                                          ulong         addr, | 
|  | **                                          ulong         cnt) | 
|  | ** called from 'flash_write()' into 'common/cmd_flash.c' | 
|  | */ | 
|  |  | 
|  | #include <common.h> | 
|  | #include <mpc8xx.h> | 
|  |  | 
|  |  | 
|  | #ifndef	CONFIG_ENV_ADDR | 
|  | #  define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) | 
|  | #endif | 
|  |  | 
|  | flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ | 
|  |  | 
|  | /*----------------------------------------------------------------------- | 
|  | * Internal Functions | 
|  | */ | 
|  | static void   flash_get_offsets (ulong base, flash_info_t *info); | 
|  | static ulong  flash_get_size (volatile unsigned char *addr, flash_info_t *info); | 
|  |  | 
|  | static int write_word (flash_info_t *info, ulong dest, ulong data); | 
|  | static int write_byte (flash_info_t *info, ulong dest, uchar data); | 
|  |  | 
|  | /*----------------------------------------------------------------------- | 
|  | */ | 
|  |  | 
|  | unsigned long | 
|  | flash_init (void) | 
|  | { | 
|  | volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR; | 
|  | volatile memctl8xx_t *memctl = &immap->im_memctl; | 
|  | unsigned long         size_b0; | 
|  | int i; | 
|  |  | 
|  | /* Init: no FLASHes known */ | 
|  | for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) | 
|  | { | 
|  | flash_info[i].flash_id = FLASH_UNKNOWN; | 
|  | } | 
|  |  | 
|  | /* Static FLASH Bank configuration here - FIXME XXX */ | 
|  |  | 
|  | size_b0 = flash_get_size ((volatile unsigned char *)FLASH_BASE0_PRELIM, | 
|  | &flash_info[0]); | 
|  |  | 
|  | if ( flash_info[0].flash_id == FLASH_UNKNOWN ) | 
|  | { | 
|  | printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", | 
|  | size_b0, size_b0<<20); | 
|  | } | 
|  |  | 
|  | /* Remap FLASH according to real size */ | 
|  | memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK); | 
|  | memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_PS_8 | BR_V; | 
|  |  | 
|  | /* Re-do sizing to get full correct info */ | 
|  | size_b0 = flash_get_size ((volatile unsigned char *)CONFIG_SYS_FLASH_BASE, | 
|  | &flash_info[0]); | 
|  |  | 
|  | flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]); | 
|  |  | 
|  | #if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE | 
|  | /* monitor protection ON by default */ | 
|  | flash_protect (FLAG_PROTECT_SET, | 
|  | CONFIG_SYS_MONITOR_BASE, | 
|  | CONFIG_SYS_MONITOR_BASE + monitor_flash_len-1, | 
|  | &flash_info[0]); | 
|  | #endif | 
|  |  | 
|  | #ifdef	CONFIG_ENV_IS_IN_FLASH | 
|  | /* ENV protection ON by default */ | 
|  | flash_protect(FLAG_PROTECT_SET, | 
|  | CONFIG_ENV_ADDR, | 
|  | CONFIG_ENV_ADDR + CONFIG_ENV_SIZE-1, | 
|  | &flash_info[0]); | 
|  | #endif | 
|  |  | 
|  | flash_info[0].size = size_b0; | 
|  |  | 
|  | return (size_b0); | 
|  | } | 
|  |  | 
|  | /*----------------------------------------------------------------------- | 
|  | */ | 
|  | static void | 
|  | flash_get_offsets (ulong          base, | 
|  | flash_info_t  *info) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | #define SECTOR_64KB    0x00010000 | 
|  |  | 
|  | /* set up sector start adress table */ | 
|  | for (i = 0; i < info->sector_count; i++) | 
|  | { | 
|  | info->start[i] = base + (i * SECTOR_64KB); | 
|  | } | 
|  | } | 
|  |  | 
|  | /*----------------------------------------------------------------------- | 
|  | */ | 
|  | void | 
|  | flash_print_info (flash_info_t *info) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | if ( info->flash_id == FLASH_UNKNOWN ) | 
|  | { | 
|  | printf ("missing or unknown FLASH type\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | switch ( info->flash_id & FLASH_VENDMASK ) | 
|  | { | 
|  | case FLASH_MAN_AMD:	printf ("AMD ");		break; | 
|  | case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break; | 
|  | case FLASH_MAN_STM: printf ("STM (Thomson) ");      break; | 
|  | default:		printf ("Unknown Vendor ");	break; | 
|  | } | 
|  |  | 
|  | switch ( info->flash_id & FLASH_TYPEMASK ) | 
|  | { | 
|  | case FLASH_AM040:   printf ("AM29F040   (4 Mbits)\n"); | 
|  | break; | 
|  | default:	        printf ("Unknown Chip Type\n"); | 
|  | break; | 
|  | } | 
|  |  | 
|  | printf ("  Size: %ld KB in %d Sectors\n", | 
|  | info->size >> 10, info->sector_count); | 
|  |  | 
|  | printf ("  Sector Start Addresses:"); | 
|  | for (i=0; i<info->sector_count; ++i) | 
|  | { | 
|  | if ((i % 5) == 0) | 
|  | printf ("\n   "); | 
|  | printf (" %08lX%s", | 
|  | info->start[i], | 
|  | info->protect[i] ? " (RO)" : "     " | 
|  | ); | 
|  | } | 
|  | printf ("\n"); | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | /*----------------------------------------------------------------------- | 
|  | */ | 
|  |  | 
|  |  | 
|  | /*----------------------------------------------------------------------- | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * The following code cannot be run from FLASH! | 
|  | */ | 
|  |  | 
|  | static ulong | 
|  | flash_get_size (volatile unsigned char *addr, | 
|  | flash_info_t           *info) | 
|  | { | 
|  | short i; | 
|  | uchar value; | 
|  | ulong base = (ulong)addr; | 
|  |  | 
|  | /* Write auto select command: read Manufacturer ID */ | 
|  | addr[0x0555] = 0xAA; | 
|  | addr[0x02AA] = 0x55; | 
|  | addr[0x0555] = 0x90; | 
|  |  | 
|  | value = addr[0]; | 
|  |  | 
|  | switch ( value ) | 
|  | { | 
|  | /*    case AMD_MANUFACT: */ | 
|  | case 0x01: | 
|  | info->flash_id = FLASH_MAN_AMD; | 
|  | break; | 
|  | /*    case FUJ_MANUFACT: */ | 
|  | case 0x04: | 
|  | info->flash_id = FLASH_MAN_FUJ; | 
|  | break; | 
|  | /*    case STM_MANUFACT: */ | 
|  | case 0x20: | 
|  | info->flash_id = FLASH_MAN_STM; | 
|  | break; | 
|  |  | 
|  | default: | 
|  | info->flash_id = FLASH_UNKNOWN; | 
|  | info->sector_count = 0; | 
|  | info->size = 0; | 
|  | return (0);			/* no or unknown flash	*/ | 
|  | } | 
|  |  | 
|  | value = addr[1];			/* device ID		*/ | 
|  |  | 
|  | switch ( value ) | 
|  | { | 
|  | case STM_ID_F040B: | 
|  | case AMD_ID_F040B: | 
|  | info->flash_id += FLASH_AM040;    /* 4 Mbits = 512k * 8  */ | 
|  | info->sector_count = 8; | 
|  | info->size = 0x00080000; | 
|  | break; | 
|  |  | 
|  | default: | 
|  | info->flash_id = FLASH_UNKNOWN; | 
|  | return (0);			/* => no or unknown flash */ | 
|  | } | 
|  |  | 
|  | /* set up sector start adress table */ | 
|  | for (i = 0; i < info->sector_count; i++) | 
|  | { | 
|  | info->start[i] = base + (i * 0x00010000); | 
|  | } | 
|  |  | 
|  | /* check for protected sectors */ | 
|  | for (i = 0; i < info->sector_count; i++) | 
|  | { | 
|  | /* read sector protection at sector address, (A7 .. A0) = 0x02 */ | 
|  | /* D0 = 1 if protected */ | 
|  | addr = (volatile unsigned char *)(info->start[i]); | 
|  | info->protect[i] = addr[2] & 1; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Prevent writes to uninitialized FLASH. | 
|  | */ | 
|  | if ( info->flash_id != FLASH_UNKNOWN ) | 
|  | { | 
|  | addr = (volatile unsigned char *)info->start[0]; | 
|  |  | 
|  | *addr = 0xF0;	/* reset bank */ | 
|  | } | 
|  |  | 
|  | return (info->size); | 
|  | } | 
|  |  | 
|  |  | 
|  | /*----------------------------------------------------------------------- | 
|  | */ | 
|  |  | 
|  | int | 
|  | flash_erase (flash_info_t  *info, | 
|  | int            s_first, | 
|  | int            s_last) | 
|  | { | 
|  | volatile unsigned char *addr = (volatile unsigned char *)(info->start[0]); | 
|  | int flag, prot, sect, l_sect; | 
|  | ulong start, now, last; | 
|  |  | 
|  | if ( (s_first < 0) || (s_first > s_last) ) | 
|  | { | 
|  | if ( info->flash_id == FLASH_UNKNOWN ) | 
|  | { | 
|  | printf ("- missing\n"); | 
|  | } | 
|  | else | 
|  | { | 
|  | printf ("- no sectors to erase\n"); | 
|  | } | 
|  | return ( 1 ); | 
|  | } | 
|  |  | 
|  | if ( (info->flash_id == FLASH_UNKNOWN) || | 
|  | (info->flash_id > FLASH_AMD_COMP) ) | 
|  | { | 
|  | printf ("Can't erase unknown flash type %08lx - aborted\n", | 
|  | info->flash_id); | 
|  | return ( 1 ); | 
|  | } | 
|  |  | 
|  | prot = 0; | 
|  | for (sect=s_first; sect<=s_last; ++sect) | 
|  | { | 
|  | if ( info->protect[sect] ) | 
|  | { | 
|  | prot++; | 
|  | } | 
|  | } | 
|  |  | 
|  | if ( prot ) | 
|  | { | 
|  | printf ("- Warning: %d protected sectors will not be erased!\n", prot); | 
|  | } | 
|  | else | 
|  | { | 
|  | printf ("\n"); | 
|  | } | 
|  |  | 
|  | l_sect = -1; | 
|  |  | 
|  | /* Disable interrupts which might cause a timeout here */ | 
|  | flag = disable_interrupts(); | 
|  |  | 
|  | addr[0x0555] = 0xAA; | 
|  | addr[0x02AA] = 0x55; | 
|  | addr[0x0555] = 0x80; | 
|  | addr[0x0555] = 0xAA; | 
|  | addr[0x02AA] = 0x55; | 
|  |  | 
|  | /* Start erase on unprotected sectors */ | 
|  | for (sect = s_first; sect<=s_last; sect++) | 
|  | { | 
|  | if (info->protect[sect] == 0)    /* not protected */ | 
|  | { | 
|  | addr = (volatile unsigned char *)(info->start[sect]); | 
|  | addr[0] = 0x30; | 
|  | l_sect = sect; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* re-enable interrupts if necessary */ | 
|  | if ( flag ) | 
|  | enable_interrupts(); | 
|  |  | 
|  | /* wait at least 80us - let's wait 1 ms */ | 
|  | udelay (1000); | 
|  |  | 
|  | /* | 
|  | * We wait for the last triggered sector | 
|  | */ | 
|  | if ( l_sect < 0 ) | 
|  | goto DONE; | 
|  |  | 
|  | start = get_timer (0); | 
|  | last  = start; | 
|  | addr = (volatile unsigned char *)(info->start[l_sect]); | 
|  | while ( (addr[0] & 0x80) != 0x80 ) | 
|  | { | 
|  | if ( (now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT ) | 
|  | { | 
|  | printf ("Timeout\n"); | 
|  | return ( 1 ); | 
|  | } | 
|  | /* show that we're waiting */ | 
|  | if ( (now - last) > 1000 )     /* every second */ | 
|  | { | 
|  | putc ('.'); | 
|  | last = now; | 
|  | } | 
|  | } | 
|  |  | 
|  | DONE: | 
|  | /* reset to read mode */ | 
|  | addr = (volatile unsigned char *)info->start[0]; | 
|  | addr[0] = 0xF0;	/* reset bank */ | 
|  |  | 
|  | printf (" done\n"); | 
|  |  | 
|  | return ( 0 ); | 
|  | } | 
|  |  | 
|  | /*----------------------------------------------------------------------- | 
|  | * Copy memory to flash, returns: | 
|  | * 0 - OK | 
|  | * 1 - write timeout | 
|  | * 2 - Flash not erased | 
|  | */ | 
|  |  | 
|  | int | 
|  | write_buff (flash_info_t  *info, | 
|  | uchar         *src, | 
|  | ulong          addr, | 
|  | ulong          cnt) | 
|  | { | 
|  | ulong cp, wp, data; | 
|  | uchar bdata; | 
|  | int i, l, rc; | 
|  |  | 
|  | if ( (info->flash_id & FLASH_TYPEMASK) == FLASH_AM040 ) | 
|  | { | 
|  | /* Width of the data bus: 8 bits */ | 
|  |  | 
|  | wp = addr; | 
|  |  | 
|  | while ( cnt ) | 
|  | { | 
|  | bdata = *src++; | 
|  |  | 
|  | if ( (rc = write_byte(info, wp, bdata)) != 0 ) | 
|  | { | 
|  | return (rc); | 
|  | } | 
|  |  | 
|  | ++wp; | 
|  | --cnt; | 
|  | } | 
|  |  | 
|  | return ( 0 ); | 
|  | } | 
|  | else | 
|  | { | 
|  | /* Width of the data bus: 32 bits */ | 
|  |  | 
|  | wp = (addr & ~3);	/* get lower word aligned address */ | 
|  |  | 
|  | /* | 
|  | * handle unaligned start bytes | 
|  | */ | 
|  | if ( (l = addr - wp) != 0 ) | 
|  | { | 
|  | data = 0; | 
|  | for (i=0, cp=wp; i<l; ++i, ++cp) | 
|  | { | 
|  | data = (data << 8) | (*(uchar *)cp); | 
|  | } | 
|  | for (; i<4 && cnt>0; ++i) | 
|  | { | 
|  | data = (data << 8) | *src++; | 
|  | --cnt; | 
|  | ++cp; | 
|  | } | 
|  | for (; cnt==0 && i<4; ++i, ++cp) | 
|  | { | 
|  | data = (data << 8) | (*(uchar *)cp); | 
|  | } | 
|  |  | 
|  | if ( (rc = write_word(info, wp, data)) != 0 ) | 
|  | { | 
|  | return (rc); | 
|  | } | 
|  | wp += 4; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * handle word aligned part | 
|  | */ | 
|  | while ( cnt >= 4 ) | 
|  | { | 
|  | data = 0; | 
|  | for (i=0; i<4; ++i) | 
|  | { | 
|  | data = (data << 8) | *src++; | 
|  | } | 
|  | if ( (rc = write_word(info, wp, data)) != 0 ) | 
|  | { | 
|  | return (rc); | 
|  | } | 
|  | wp  += 4; | 
|  | cnt -= 4; | 
|  | } | 
|  |  | 
|  | if ( cnt == 0 ) | 
|  | { | 
|  | return (0); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * handle unaligned tail bytes | 
|  | */ | 
|  | data = 0; | 
|  | for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) | 
|  | { | 
|  | data = (data << 8) | *src++; | 
|  | --cnt; | 
|  | } | 
|  | for (; i<4; ++i, ++cp) | 
|  | { | 
|  | data = (data << 8) | (*(uchar *)cp); | 
|  | } | 
|  |  | 
|  | return (write_word(info, wp, data)); | 
|  | } | 
|  | } | 
|  |  | 
|  | /*----------------------------------------------------------------------- | 
|  | * Write a word to Flash, returns: | 
|  | * 0 - OK | 
|  | * 1 - write timeout | 
|  | * 2 - Flash not erased | 
|  | */ | 
|  | static int | 
|  | write_word (flash_info_t  *info, | 
|  | ulong          dest, | 
|  | ulong          data) | 
|  | { | 
|  | vu_long *addr = (vu_long*)(info->start[0]); | 
|  | ulong start; | 
|  | int flag; | 
|  |  | 
|  | /* Check if Flash is (sufficiently) erased */ | 
|  | if ( (*((vu_long *)dest) & data) != data ) | 
|  | { | 
|  | return (2); | 
|  | } | 
|  | /* Disable interrupts which might cause a timeout here */ | 
|  | flag = disable_interrupts(); | 
|  |  | 
|  | addr[0x0555] = 0x00AA00AA; | 
|  | addr[0x02AA] = 0x00550055; | 
|  | addr[0x0555] = 0x00A000A0; | 
|  |  | 
|  | *((vu_long *)dest) = data; | 
|  |  | 
|  | /* re-enable interrupts if necessary */ | 
|  | if ( flag ) | 
|  | enable_interrupts(); | 
|  |  | 
|  | /* data polling for D7 */ | 
|  | start = get_timer (0); | 
|  | while ( (*((vu_long *)dest) & 0x00800080) != (data & 0x00800080) ) | 
|  | { | 
|  | if ( get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT ) | 
|  | { | 
|  | return (1); | 
|  | } | 
|  | } | 
|  |  | 
|  | return (0); | 
|  | } | 
|  |  | 
|  | /*----------------------------------------------------------------------- | 
|  | * Write a byte to Flash, returns: | 
|  | * 0 - OK | 
|  | * 1 - write timeout | 
|  | * 2 - Flash not erased | 
|  | */ | 
|  | static int | 
|  | write_byte (flash_info_t  *info, | 
|  | ulong          dest, | 
|  | uchar          data) | 
|  | { | 
|  | volatile unsigned char *addr = (volatile unsigned char *)(info->start[0]); | 
|  | ulong  start; | 
|  | int    flag; | 
|  |  | 
|  | /* Check if Flash is (sufficiently) erased */ | 
|  | if ( (*((volatile unsigned char *)dest) & data) != data ) | 
|  | { | 
|  | return (2); | 
|  | } | 
|  | /* Disable interrupts which might cause a timeout here */ | 
|  | flag = disable_interrupts(); | 
|  |  | 
|  | addr[0x0555] = 0xAA; | 
|  | addr[0x02AA] = 0x55; | 
|  | addr[0x0555] = 0xA0; | 
|  |  | 
|  | *((volatile unsigned char *)dest) = data; | 
|  |  | 
|  | /* re-enable interrupts if necessary */ | 
|  | if ( flag ) | 
|  | enable_interrupts(); | 
|  |  | 
|  | /* data polling for D7 */ | 
|  | start = get_timer (0); | 
|  | while ( (*((volatile unsigned char *)dest) & 0x80) != (data & 0x80) ) | 
|  | { | 
|  | if ( get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT ) | 
|  | { | 
|  | return (1); | 
|  | } | 
|  | } | 
|  |  | 
|  | return (0); | 
|  | } | 
|  |  | 
|  | /*----------------------------------------------------------------------- | 
|  | */ |