| /* | 
 |  * Copyright (C) Freescale Semiconductor, Inc. 2006-2007 | 
 |  * | 
 |  * Author: Scott Wood <scottwood@freescale.com> | 
 |  * | 
 |  * See file CREDITS for list of people who contributed to this | 
 |  * project. | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or | 
 |  * modify it under the terms of the GNU General Public License as | 
 |  * published by the Free Software Foundation; either version 2 of | 
 |  * the License, or (at your option) any later version. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program; if not, write to the Free Software | 
 |  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | 
 |  * MA 02111-1307 USA | 
 |  */ | 
 |  | 
 | #include <common.h> | 
 | #if defined(CONFIG_OF_LIBFDT) | 
 | #include <libfdt.h> | 
 | #endif | 
 | #include <pci.h> | 
 | #include <mpc83xx.h> | 
 | #include <vsc7385.h> | 
 | #include <ns16550.h> | 
 | #include <nand.h> | 
 |  | 
 | DECLARE_GLOBAL_DATA_PTR; | 
 |  | 
 | int board_early_init_f(void) | 
 | { | 
 | #ifndef CONFIG_SYS_8313ERDB_BROKEN_PMC | 
 | 	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; | 
 |  | 
 | 	if (im->pmc.pmccr1 & PMCCR1_POWER_OFF) | 
 | 		gd->flags |= GD_FLG_SILENT; | 
 | #endif | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | int checkboard(void) | 
 | { | 
 | 	puts("Board: Freescale MPC8313ERDB\n"); | 
 | 	return 0; | 
 | } | 
 |  | 
 | #ifndef CONFIG_NAND_SPL | 
 | static struct pci_region pci_regions[] = { | 
 | 	{ | 
 | 		bus_start: CONFIG_SYS_PCI1_MEM_BASE, | 
 | 		phys_start: CONFIG_SYS_PCI1_MEM_PHYS, | 
 | 		size: CONFIG_SYS_PCI1_MEM_SIZE, | 
 | 		flags: PCI_REGION_MEM | PCI_REGION_PREFETCH | 
 | 	}, | 
 | 	{ | 
 | 		bus_start: CONFIG_SYS_PCI1_MMIO_BASE, | 
 | 		phys_start: CONFIG_SYS_PCI1_MMIO_PHYS, | 
 | 		size: CONFIG_SYS_PCI1_MMIO_SIZE, | 
 | 		flags: PCI_REGION_MEM | 
 | 	}, | 
 | 	{ | 
 | 		bus_start: CONFIG_SYS_PCI1_IO_BASE, | 
 | 		phys_start: CONFIG_SYS_PCI1_IO_PHYS, | 
 | 		size: CONFIG_SYS_PCI1_IO_SIZE, | 
 | 		flags: PCI_REGION_IO | 
 | 	} | 
 | }; | 
 |  | 
 | void pci_init_board(void) | 
 | { | 
 | 	volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR; | 
 | 	volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk; | 
 | 	volatile law83xx_t *pci_law = immr->sysconf.pcilaw; | 
 | 	struct pci_region *reg[] = { pci_regions }; | 
 | 	int warmboot; | 
 |  | 
 | 	/* Enable all 3 PCI_CLK_OUTPUTs. */ | 
 | 	clk->occr |= 0xe0000000; | 
 |  | 
 | 	/* | 
 | 	 * Configure PCI Local Access Windows | 
 | 	 */ | 
 | 	pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR; | 
 | 	pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB; | 
 |  | 
 | 	pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR; | 
 | 	pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB; | 
 |  | 
 | 	warmboot = gd->bd->bi_bootflags & BOOTFLAG_WARM; | 
 | #ifndef CONFIG_SYS_8313ERDB_BROKEN_PMC | 
 | 	warmboot |= immr->pmc.pmccr1 & PMCCR1_POWER_OFF; | 
 | #endif | 
 |  | 
 | 	mpc83xx_pci_init(1, reg, warmboot); | 
 | } | 
 |  | 
 | /* | 
 |  * Miscellaneous late-boot configurations | 
 |  * | 
 |  * If a VSC7385 microcode image is present, then upload it. | 
 | */ | 
 | int misc_init_r(void) | 
 | { | 
 | 	int rc = 0; | 
 |  | 
 | #ifdef CONFIG_VSC7385_IMAGE | 
 | 	if (vsc7385_upload_firmware((void *) CONFIG_VSC7385_IMAGE, | 
 | 		CONFIG_VSC7385_IMAGE_SIZE)) { | 
 | 		puts("Failure uploading VSC7385 microcode.\n"); | 
 | 		rc = 1; | 
 | 	} | 
 | #endif | 
 |  | 
 | 	return rc; | 
 | } | 
 |  | 
 | #if defined(CONFIG_OF_BOARD_SETUP) | 
 | void ft_board_setup(void *blob, bd_t *bd) | 
 | { | 
 | 	ft_cpu_setup(blob, bd); | 
 | #ifdef CONFIG_PCI | 
 | 	ft_pci_setup(blob, bd); | 
 | #endif | 
 | } | 
 | #endif | 
 | #else /* CONFIG_NAND_SPL */ | 
 | void board_init_f(ulong bootflag) | 
 | { | 
 | 	board_early_init_f(); | 
 | 	NS16550_init((NS16550_t)(CONFIG_SYS_IMMR + 0x4500), | 
 | 	             CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE); | 
 | 	puts("NAND boot... "); | 
 | 	init_timebase(); | 
 | 	initdram(0); | 
 | 	relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000, (gd_t *)gd, | 
 | 	              CONFIG_SYS_NAND_U_BOOT_RELOC); | 
 | } | 
 |  | 
 | void board_init_r(gd_t *gd, ulong dest_addr) | 
 | { | 
 | 	nand_boot(); | 
 | } | 
 |  | 
 | void putc(char c) | 
 | { | 
 | 	if (gd->flags & GD_FLG_SILENT) | 
 | 		return; | 
 |  | 
 | 	if (c == '\n') | 
 | 		NS16550_putc((NS16550_t)(CONFIG_SYS_IMMR + 0x4500), '\r'); | 
 |  | 
 | 	NS16550_putc((NS16550_t)(CONFIG_SYS_IMMR + 0x4500), c); | 
 | } | 
 | #endif |