|  | /* ax88180.h: ASIX AX88180 Non-PCI Gigabit Ethernet u-boot driver */ | 
|  | /* | 
|  | * | 
|  | *  This program is free software; you can distribute it and/or modify it | 
|  | *  under the terms of the GNU General Public License (Version 2) as | 
|  | *  published by the Free Software Foundation. | 
|  | * | 
|  | *  This program is distributed in the hope it will be useful, but WITHOUT | 
|  | *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | 
|  | *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License | 
|  | *  for more details. | 
|  | * | 
|  | *  You should have received a copy of the GNU General Public License along | 
|  | *  with this program; if not, write to the Free Software Foundation, Inc., | 
|  | *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA. | 
|  | * | 
|  | */ | 
|  |  | 
|  | #ifndef _AX88180_H_ | 
|  | #define _AX88180_H_ | 
|  |  | 
|  | #include <asm/io.h> | 
|  | #include <asm/types.h> | 
|  | #include <config.h> | 
|  |  | 
|  | typedef enum _ax88180_link_state { | 
|  | INS_LINK_DOWN, | 
|  | INS_LINK_UP, | 
|  | INS_LINK_UNKNOWN | 
|  | } ax88180_link_state; | 
|  |  | 
|  | struct ax88180_private { | 
|  | unsigned char BusWidth; | 
|  | unsigned char PadSize; | 
|  | unsigned short PhyAddr; | 
|  | unsigned short PhyID0; | 
|  | unsigned short PhyID1; | 
|  | unsigned short FirstTxDesc; | 
|  | unsigned short NextTxDesc; | 
|  | ax88180_link_state LinkState; | 
|  | }; | 
|  |  | 
|  | #define BUS_WIDTH_16			1 | 
|  | #define BUS_WIDTH_32			2 | 
|  |  | 
|  | #define ENABLE_JUMBO			1 | 
|  | #define DISABLE_JUMBO			0 | 
|  |  | 
|  | #define ENABLE_BURST			1 | 
|  | #define DISABLE_BURST			0 | 
|  |  | 
|  | #define NORMAL_RX_MODE		0 | 
|  | #define RX_LOOPBACK_MODE		1 | 
|  | #define RX_INIFINIT_LOOP_MODE		2 | 
|  | #define TX_INIFINIT_LOOP_MODE		3 | 
|  |  | 
|  | #define DEFAULT_ETH_MTU		1500 | 
|  |  | 
|  | /* Jumbo packet size 4086 bytes included 4 bytes CRC*/ | 
|  | #define MAX_JUMBO_MTU		4072 | 
|  |  | 
|  | /* Max Tx Jumbo size 4086 bytes included 4 bytes CRC */ | 
|  | #define MAX_TX_JUMBO_SIZE		4086 | 
|  |  | 
|  | /* Max Rx Jumbo size is 15K Bytes */ | 
|  | #define MAX_RX_SIZE			0x3C00 | 
|  |  | 
|  | #define MARVELL_ALASKA_PHYSID0	0x141 | 
|  | #define MARVELL_88E1118_PHYSID1	0xE40 | 
|  |  | 
|  | #define CICADA_CIS8201_PHYSID0		0x000F | 
|  |  | 
|  | #define MEDIA_AUTO			0 | 
|  | #define MEDIA_1000FULL			1 | 
|  | #define MEDIA_1000HALF			2 | 
|  | #define MEDIA_100FULL			3 | 
|  | #define MEDIA_100HALF			4 | 
|  | #define MEDIA_10FULL			5 | 
|  | #define MEDIA_10HALF			6 | 
|  | #define MEDIA_UNKNOWN		7 | 
|  |  | 
|  | #define AUTO_MEDIA			0 | 
|  | #define FORCE_MEDIA			1 | 
|  |  | 
|  | #define TXDP_MASK			3 | 
|  | #define TXDP0				0 | 
|  | #define TXDP1				1 | 
|  | #define TXDP2				2 | 
|  | #define TXDP3				3 | 
|  |  | 
|  | #define CMD_MAP_SIZE			0x100 | 
|  |  | 
|  | #if defined (CONFIG_DRIVER_AX88180_16BIT) | 
|  | #define AX88180_MEMORY_SIZE		0x00004000 | 
|  | #define START_BASE			0x1000 | 
|  |  | 
|  | #define RX_BUF_SIZE			0x1000 | 
|  | #define TX_BUF_SIZE			0x0F00 | 
|  |  | 
|  | #define TX_BASE			START_BASE | 
|  | #define CMD_BASE			(TX_BASE + TX_BUF_SIZE) | 
|  | #define RX_BASE			(CMD_BASE + CMD_MAP_SIZE) | 
|  | #else | 
|  | #define AX88180_MEMORY_SIZE	0x00010000 | 
|  |  | 
|  | #define RX_BUF_SIZE			0x8000 | 
|  | #define TX_BUF_SIZE			0x7C00 | 
|  |  | 
|  | #define RX_BASE			0x0000 | 
|  | #define TX_BASE			(RX_BASE + RX_BUF_SIZE) | 
|  | #define CMD_BASE			(TX_BASE + TX_BUF_SIZE) | 
|  | #endif | 
|  |  | 
|  | /* AX88180 Memory Mapping Definition */ | 
|  | #define RXBUFFER_START			RX_BASE | 
|  | #define RX_PACKET_LEN_OFFSET	0 | 
|  | #define RX_PAGE_NUM_MASK		0x7FF	/* RX pages 0~7FFh */ | 
|  | #define TXBUFFER_START			TX_BASE | 
|  |  | 
|  | /* AX88180 MAC Register Definition */ | 
|  | #define DECODE		(0) | 
|  | #define DECODE_EN		0x00000001 | 
|  | #define BASE		(6) | 
|  | #define CMD		(CMD_BASE + 0x0000) | 
|  | #define WAKEMOD		0x00000001 | 
|  | #define TXEN			0x00000100 | 
|  | #define RXEN			0x00000200 | 
|  | #define DEFAULT_CMD		WAKEMOD | 
|  | #define IMR		(CMD_BASE + 0x0004) | 
|  | #define IMR_RXBUFFOVR	0x00000001 | 
|  | #define IMR_WATCHDOG	0x00000002 | 
|  | #define IMR_TX		0x00000008 | 
|  | #define IMR_RX		0x00000010 | 
|  | #define IMR_PHY		0x00000020 | 
|  | #define CLEAR_IMR		0x00000000 | 
|  | #define DEFAULT_IMR		(IMR_PHY | IMR_RX | IMR_TX |\ | 
|  | IMR_RXBUFFOVR | IMR_WATCHDOG) | 
|  | #define ISR		(CMD_BASE + 0x0008) | 
|  | #define ISR_RXBUFFOVR	0x00000001 | 
|  | #define ISR_WATCHDOG	0x00000002 | 
|  | #define ISR_TX			0x00000008 | 
|  | #define ISR_RX			0x00000010 | 
|  | #define ISR_PHY		0x00000020 | 
|  | #define TXCFG		(CMD_BASE + 0x0010) | 
|  | #define AUTOPAD_CRC		0x00000050 | 
|  | #define DEFAULT_TXCFG	AUTOPAD_CRC | 
|  | #define TXCMD		(CMD_BASE + 0x0014) | 
|  | #define TXCMD_TXDP_MASK	0x00006000 | 
|  | #define TXCMD_TXDP0		0x00000000 | 
|  | #define TXCMD_TXDP1		0x00002000 | 
|  | #define TXCMD_TXDP2		0x00004000 | 
|  | #define TXCMD_TXDP3		0x00006000 | 
|  | #define TX_START_WRITE	0x00008000 | 
|  | #define TX_STOP_WRITE		0x00000000 | 
|  | #define DEFAULT_TXCMD	0x00000000 | 
|  | #define TXBS		(CMD_BASE + 0x0018) | 
|  | #define TXDP0_USED		0x00000001 | 
|  | #define TXDP1_USED		0x00000002 | 
|  | #define TXDP2_USED		0x00000004 | 
|  | #define TXDP3_USED		0x00000008 | 
|  | #define DEFAULT_TXBS		0x00000000 | 
|  | #define TXDES0		(CMD_BASE + 0x0020) | 
|  | #define TXDPx_ENABLE		0x00008000 | 
|  | #define TXDPx_LEN_MASK	0x00001FFF | 
|  | #define DEFAULT_TXDES0	0x00000000 | 
|  | #define TXDES1		(CMD_BASE + 0x0024) | 
|  | #define TXDPx_ENABLE		0x00008000 | 
|  | #define TXDPx_LEN_MASK	0x00001FFF | 
|  | #define DEFAULT_TXDES1	0x00000000 | 
|  | #define TXDES2		(CMD_BASE + 0x0028) | 
|  | #define TXDPx_ENABLE		0x00008000 | 
|  | #define TXDPx_LEN_MASK	0x00001FFF | 
|  | #define DEFAULT_TXDES2	0x00000000 | 
|  | #define TXDES3		(CMD_BASE + 0x002C) | 
|  | #define TXDPx_ENABLE		0x00008000 | 
|  | #define TXDPx_LEN_MASK	0x00001FFF | 
|  | #define DEFAULT_TXDES3	0x00000000 | 
|  | #define RXCFG		(CMD_BASE + 0x0030) | 
|  | #define RXBUFF_PROTECT	0x00000001 | 
|  | #define RXTCPCRC_CHECK	0x00000010 | 
|  | #define RXFLOW_ENABLE	0x00000100 | 
|  | #define DEFAULT_RXCFG	RXBUFF_PROTECT | 
|  | #define RXCURT		(CMD_BASE + 0x0034) | 
|  | #define DEFAULT_RXCURT	0x00000000 | 
|  | #define RXBOUND	(CMD_BASE + 0x0038) | 
|  | #define DEFAULT_RXBOUND	0x7FF		/* RX pages 0~7FFh */ | 
|  | #define MACCFG0	(CMD_BASE + 0x0040) | 
|  | #define MACCFG0_BIT3_0	0x00000007 | 
|  | #define IPGT_VAL		0x00000150 | 
|  | #define TXFLOW_ENABLE	0x00001000 | 
|  | #define SPEED100		0x00008000 | 
|  | #define DEFAULT_MACCFG0	(IPGT_VAL | MACCFG0_BIT3_0) | 
|  | #define MACCFG1	(CMD_BASE + 0x0044) | 
|  | #define RGMII_EN		0x00000002 | 
|  | #define RXFLOW_EN		0x00000020 | 
|  | #define FULLDUPLEX		0x00000040 | 
|  | #define MAX_JUMBO_LEN	0x00000780 | 
|  | #define RXJUMBO_EN		0x00000800 | 
|  | #define GIGA_MODE_EN	0x00001000 | 
|  | #define RXCRC_CHECK		0x00002000 | 
|  | #define RXPAUSE_DA_CHECK	0x00004000 | 
|  |  | 
|  | #define JUMBO_LEN_4K		0x00000200 | 
|  | #define JUMBO_LEN_15K	0x00000780 | 
|  | #define DEFAULT_MACCFG1	(RXCRC_CHECK | RXPAUSE_DA_CHECK | \ | 
|  | RGMII_EN) | 
|  | #define CICADA_DEFAULT_MACCFG1	(RXCRC_CHECK | RXPAUSE_DA_CHECK) | 
|  | #define MACCFG2		(CMD_BASE + 0x0048) | 
|  | #define MACCFG2_BIT15_8	0x00000100 | 
|  | #define JAM_LIMIT_MASK	0x000000FC | 
|  | #define DEFAULT_JAM_LIMIT	0x00000064 | 
|  | #define DEFAULT_MACCFG2	MACCFG2_BIT15_8 | 
|  | #define MACCFG3		(CMD_BASE + 0x004C) | 
|  | #define IPGR2_VAL		0x0000000E | 
|  | #define IPGR1_VAL		0x00000600 | 
|  | #define NOABORT		0x00008000 | 
|  | #define DEFAULT_MACCFG3	(IPGR1_VAL | IPGR2_VAL) | 
|  | #define TXPAUT		(CMD_BASE + 0x0054) | 
|  | #define DEFAULT_TXPAUT	0x001FE000 | 
|  | #define RXBTHD0		(CMD_BASE + 0x0058) | 
|  | #define DEFAULT_RXBTHD0	0x00000300 | 
|  | #define RXBTHD1		(CMD_BASE + 0x005C) | 
|  | #define DEFAULT_RXBTHD1	0x00000600 | 
|  | #define RXFULTHD	(CMD_BASE + 0x0060) | 
|  | #define DEFAULT_RXFULTHD	0x00000100 | 
|  | #define MISC		(CMD_BASE + 0x0068) | 
|  | /* Normal operation mode */ | 
|  | #define MISC_NORMAL		0x00000003 | 
|  | /* Clear bit 0 to reset MAC */ | 
|  | #define MISC_RESET_MAC	0x00000002 | 
|  | /* Clear bit 1 to reset PHY */ | 
|  | #define MISC_RESET_PHY	0x00000001 | 
|  | /* Clear bit 0 and 1 to reset MAC and PHY */ | 
|  | #define MISC_RESET_MAC_PHY	0x00000000 | 
|  | #define DEFAULT_MISC		MISC_NORMAL | 
|  | #define MACID0		(CMD_BASE + 0x0070) | 
|  | #define MACID1		(CMD_BASE + 0x0074) | 
|  | #define MACID2		(CMD_BASE + 0x0078) | 
|  | #define TXLEN		(CMD_BASE + 0x007C) | 
|  | #define DEFAULT_TXLEN	0x000005FC | 
|  | #define RXFILTER	(CMD_BASE + 0x0080) | 
|  | #define RX_RXANY		0x00000001 | 
|  | #define RX_MULTICAST		0x00000002 | 
|  | #define RX_UNICAST		0x00000004 | 
|  | #define RX_BROADCAST	0x00000008 | 
|  | #define RX_MULTI_HASH	0x00000010 | 
|  | #define DISABLE_RXFILTER	0x00000000 | 
|  | #define DEFAULT_RXFILTER	(RX_BROADCAST + RX_UNICAST) | 
|  | #define MDIOCTRL	(CMD_BASE + 0x0084) | 
|  | #define PHY_ADDR_MASK	0x0000001F | 
|  | #define REG_ADDR_MASK	0x00001F00 | 
|  | #define READ_PHY		0x00004000 | 
|  | #define WRITE_PHY		0x00008000 | 
|  | #define MDIODP		(CMD_BASE + 0x0088) | 
|  | #define GPIOCTRL	(CMD_BASE + 0x008C) | 
|  | #define RXINDICATOR	(CMD_BASE + 0x0090) | 
|  | #define RX_START_READ	0x00000001 | 
|  | #define RX_STOP_READ		0x00000000 | 
|  | #define DEFAULT_RXINDICATOR	RX_STOP_READ | 
|  | #define TXST		(CMD_BASE + 0x0094) | 
|  | #define MDCCLKPAT	(CMD_BASE + 0x00A0) | 
|  | #define RXIPCRCCNT	(CMD_BASE + 0x00A4) | 
|  | #define RXCRCCNT	(CMD_BASE + 0x00A8) | 
|  | #define TXFAILCNT	(CMD_BASE + 0x00AC) | 
|  | #define PROMDP		(CMD_BASE + 0x00B0) | 
|  | #define PROMCTRL	(CMD_BASE + 0x00B4) | 
|  | #define RELOAD_EEPROM	0x00000200 | 
|  | #define MAXRXLEN	(CMD_BASE + 0x00B8) | 
|  | #define HASHTAB0	(CMD_BASE + 0x00C0) | 
|  | #define HASHTAB1	(CMD_BASE + 0x00C4) | 
|  | #define HASHTAB2	(CMD_BASE + 0x00C8) | 
|  | #define HASHTAB3	(CMD_BASE + 0x00CC) | 
|  | #define DOGTHD0	(CMD_BASE + 0x00E0) | 
|  | #define DEFAULT_DOGTHD0	0x0000FFFF | 
|  | #define DOGTHD1	(CMD_BASE + 0x00E4) | 
|  | #define START_WATCHDOG_TIMER	0x00008000 | 
|  | #define DEFAULT_DOGTHD1		0x00000FFF | 
|  | #define SOFTRST		(CMD_BASE + 0x00EC) | 
|  | #define SOFTRST_NORMAL	0x00000003 | 
|  | #define SOFTRST_RESET_MAC	0x00000002 | 
|  |  | 
|  | /* Marvell 88E1111 Gigabit PHY Register Definition */ | 
|  | #define M88_SSR		0x0011 | 
|  | #define SSR_SPEED_MASK	0xC000 | 
|  | #define SSR_SPEED_1000		0x8000 | 
|  | #define SSR_SPEED_100		0x4000 | 
|  | #define SSR_SPEED_10		0x0000 | 
|  | #define SSR_DUPLEX		0x2000 | 
|  | #define SSR_MEDIA_RESOLVED_OK	0x0800 | 
|  |  | 
|  | #define SSR_MEDIA_MASK	(SSR_SPEED_MASK | SSR_DUPLEX) | 
|  | #define SSR_1000FULL		(SSR_SPEED_1000 | SSR_DUPLEX) | 
|  | #define SSR_1000HALF		SSR_SPEED_1000 | 
|  | #define SSR_100FULL		(SSR_SPEED_100 | SSR_DUPLEX) | 
|  | #define SSR_100HALF		SSR_SPEED_100 | 
|  | #define SSR_10FULL		(SSR_SPEED_10 | SSR_DUPLEX) | 
|  | #define SSR_10HALF		SSR_SPEED_10 | 
|  | #define M88_IER		0x0012 | 
|  | #define LINK_CHANGE_INT	0x0400 | 
|  | #define M88_ISR		0x0013 | 
|  | #define LINK_CHANGE_STATUS	0x0400 | 
|  | #define M88E1111_EXT_SCR	0x0014 | 
|  | #define RGMII_RXCLK_DELAY	0x0080 | 
|  | #define RGMII_TXCLK_DELAY	0x0002 | 
|  | #define DEFAULT_EXT_SCR	(RGMII_TXCLK_DELAY | RGMII_RXCLK_DELAY) | 
|  | #define M88E1111_EXT_SSR	0x001B | 
|  | #define HWCFG_MODE_MASK	0x000F | 
|  | #define RGMII_COPPER_MODE	0x000B | 
|  |  | 
|  | /* Marvell 88E1118 Gigabit PHY Register Definition */ | 
|  | #define M88E1118_CR			0x14 | 
|  | #define M88E1118_CR_RGMII_RXCLK_DELAY	0x0020 | 
|  | #define M88E1118_CR_RGMII_TXCLK_DELAY	0x0010 | 
|  | #define M88E1118_CR_DEFAULT		(M88E1118_CR_RGMII_TXCLK_DELAY | \ | 
|  | M88E1118_CR_RGMII_RXCLK_DELAY) | 
|  | #define M88E1118_LEDCTL		0x10		/* Reg 16 on page 3 */ | 
|  | #define M88E1118_LEDCTL_LED2INT			0x200 | 
|  | #define M88E1118_LEDCTL_LED2BLNK			0x400 | 
|  | #define M88E1118_LEDCTL_LED0DUALMODE1	0xc | 
|  | #define M88E1118_LEDCTL_LED0DUALMODE2	0xd | 
|  | #define M88E1118_LEDCTL_LED0DUALMODE3	0xe | 
|  | #define M88E1118_LEDCTL_LED0DUALMODE4	0xf | 
|  | #define M88E1118_LEDCTL_DEFAULT	(M88E1118_LEDCTL_LED2BLNK | \ | 
|  | M88E1118_LEDCTL_LED0DUALMODE4) | 
|  |  | 
|  | #define M88E1118_LEDMIX		0x11		/* Reg 17 on page 3 */ | 
|  | #define M88E1118_LEDMIX_LED050				0x4 | 
|  | #define M88E1118_LEDMIX_LED150				0x8 | 
|  |  | 
|  | #define M88E1118_PAGE_SEL	0x16		/* Reg page select */ | 
|  |  | 
|  | /* CICADA CIS8201 Gigabit PHY Register Definition */ | 
|  | #define CIS_IMR		0x0019 | 
|  | #define CIS_INT_ENABLE	0x8000 | 
|  | #define CIS_LINK_CHANGE_INT	0x2000 | 
|  | #define CIS_ISR		0x001A | 
|  | #define CIS_INT_PENDING	0x8000 | 
|  | #define CIS_LINK_CHANGE_STATUS	0x2000 | 
|  | #define CIS_AUX_CTRL_STATUS	0x001C | 
|  | #define CIS_AUTONEG_COMPLETE	0x8000 | 
|  | #define CIS_SPEED_MASK	0x0018 | 
|  | #define CIS_SPEED_1000		0x0010 | 
|  | #define CIS_SPEED_100		0x0008 | 
|  | #define CIS_SPEED_10		0x0000 | 
|  | #define CIS_DUPLEX		0x0020 | 
|  |  | 
|  | #define CIS_MEDIA_MASK	(CIS_SPEED_MASK | CIS_DUPLEX) | 
|  | #define CIS_1000FULL		(CIS_SPEED_1000 | CIS_DUPLEX) | 
|  | #define CIS_1000HALF		CIS_SPEED_1000 | 
|  | #define CIS_100FULL		(CIS_SPEED_100 | CIS_DUPLEX) | 
|  | #define CIS_100HALF		CIS_SPEED_100 | 
|  | #define CIS_10FULL		(CIS_SPEED_10 | CIS_DUPLEX) | 
|  | #define CIS_10HALF		CIS_SPEED_10 | 
|  | #define CIS_SMI_PRIORITY	0x0004 | 
|  |  | 
|  | static inline unsigned short INW (struct eth_device *dev, unsigned long addr) | 
|  | { | 
|  | return le16_to_cpu(readw(addr + (void *)dev->iobase)); | 
|  | } | 
|  |  | 
|  | /* | 
|  | Access RXBUFFER_START/TXBUFFER_START to read RX buffer/write TX buffer | 
|  | */ | 
|  | #if defined (CONFIG_DRIVER_AX88180_16BIT) | 
|  | static inline void OUTW (struct eth_device *dev, unsigned short command, unsigned long addr) | 
|  | { | 
|  | writew(cpu_to_le16(command), addr + (void *)dev->iobase); | 
|  | } | 
|  |  | 
|  | static inline unsigned short READ_RXBUF (struct eth_device *dev) | 
|  | { | 
|  | return le16_to_cpu(readw(RXBUFFER_START + (void *)dev->iobase)); | 
|  | } | 
|  |  | 
|  | static inline void WRITE_TXBUF (struct eth_device *dev, unsigned short data) | 
|  | { | 
|  | writew(cpu_to_le16(data), TXBUFFER_START + (void *)dev->iobase); | 
|  | } | 
|  | #else | 
|  | static inline void OUTW (struct eth_device *dev, unsigned short command, unsigned long addr) | 
|  | { | 
|  | writel(cpu_to_le32(command), addr + (void *)dev->iobase); | 
|  | } | 
|  |  | 
|  | static inline unsigned long READ_RXBUF (struct eth_device *dev) | 
|  | { | 
|  | return le32_to_cpu(readl(RXBUFFER_START + (void *)dev->iobase)); | 
|  | } | 
|  |  | 
|  | static inline void WRITE_TXBUF (struct eth_device *dev, unsigned long data) | 
|  | { | 
|  | writel(cpu_to_le32(data), TXBUFFER_START + (void *)dev->iobase); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | #endif /* _AX88180_H_ */ |