| Building U-Boot |
| --------------- |
| |
| The ATUM8548 code is known to build using ELDK 4.1. |
| |
| $ make ATUM8548_config |
| Configuring for ATUM8548 board... |
| $ make |
| |
| Using Flash |
| ----------- |
| |
| The ATUM8548 board has one flash bank, of 128MB in size (2^23 = 0x08000000). |
| |
| The BDI2000 commands for copying u-boot into flash are |
| as follows: |
| |
| erase 0xFFF80000 0x4000 0x20 |
| prog 0xfff80000 uboot.bin bin |
| |
| Booting Linux |
| ------------- |
| |
| U-boot/kermit commands for booting linux via NFS - assumming the proper |
| bootargs are set - are as follows: |
| |
| tftp 1000000 uImage.atum |
| tftp c00000 mpc8548atum.dtb |
| bootm 1000000 - c00000 |
