| Wind River SBC8641D reference board |
| =========================== |
| |
| Created 06/14/2007 Joe Hamman |
| Copyright 2007, Embedded Specialties, Inc. |
| Copyright 2007 Wind River Systemes, Inc. |
| ----------------------------- |
| |
| 1. Building U-Boot |
| ------------------ |
| The SBC8641D code is known to build using ELDK 4.1. |
| |
| $ make sbc8641d_config |
| Configuring for sbc8641d board... |
| |
| $ make |
| |
| |
| 2. Switch and Jumper Settings |
| ----------------------------- |
| All Jumpers & Switches are in their default positions. Please refer to |
| the board documentation for details. Some settings control CPU voltages |
| and settings may change with board revisions. |
| |
| 3. Known limitations |
| -------------------- |
| PCI: |
| The PCI command may hang if no boards are present in either slot. |
